Home > Research > Manufacturing > Publications & Outputs

Research

View graph of relations

Manufacturing

301 - 350 out of 1,001Page size: 50
RSS feed of this list
  1. 2006
  2. Published

    Virtual Prototyping Phase II

    Rennie, A., 05/2006, N/A. 37 p.

    Research output: Book/Report/Proceedings › Commissioned report

  3. Published

    MATERIALS TESTING AND VOLUMETRIC ANALYSIS OF EXPLANTED ABG I CUP INSERTS

    Chuter, G. S. J., Cloke, D. J., Green, S. M. & Partington, P. F., 1/05/2006, In: Journal of Bone and Joint Surgery, British Volume. 88-B, SUPP II, p. 246 1 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  4. Published

    A biomechanical study comparing a raft of 3.5 mm cortical screws with 6.5 mm cancellous screws in depressed tibial plateau fractures

    Patil, S., Mahon, A., Green, S., McMurtry, I. & Port, A., 06/2006, In: Knee. 13, 3, p. 231-235 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  5. Published

    Nd:KGd(WO4)2 laser at 1.35 μm passively Q-switched with V3+:YAG crystal and PbS-doped glass

    Zolotovskaya, S., Savitski, V. G., Gaponenko, M. S., Malyarevich, A. M., Yumashev, K. V., Demchuk, M. I., Raaben, H., Zhilin, A. A. & Nejezchleb, K., 06/2006, In: Optical Materials. 28, 8-9, p. 919-924 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    Copper and copper selenide nanoparticles in the sol-gel matrices: structural and optical

    Gurin, V. S., Alexeenko, A. A., Zolotovskaya, S. & Yumashev, K. V., 07/2006, In: Materials Science and Engineering: C . 26, 5-7, p. 952-955 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Nonlinear optical properties and Q-switch performance of silica glasses doped with CuxSe nanoparticles

    Zolotovskaya, S., Savitski, V. G., Prokoshin, P. V., Yumashev, K. V., Gurin, V. S. & Alexeenko, A. A., 1/07/2006, In: Journal of the Optical Society of America B. 23, 7, p. 1268-1275 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    Thermal and microstructural aspects of the laser direct metal deposition of waspaloy

    Pinkerton, A. J., Karadge, M., Syed, W. U. H. & Li, L., 08/2006, In: Journal of Laser Applications. 18, 3, p. 216-226 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns.

    Turvey, G. & Zhang, Y., 09/2006, In: Computers and Structures. 84, 22-23, p. 1527-1537 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  10. Published

    Ply cracking and stiffness degradation in cross-ply laminates under biaxial extension, bending and thermal loading

    Zhang, D., Ye, J. & Lam, D., 09/2006, In: Composite Structures. 75, 1-4, p. 121-131 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. Published

    Eddy current measurements of electrical conductivity and magnetic permeability of porous metals.

    Ma, X., Peyton, A. J. & Zhao, Y. Y., 10/2006, In: NDT and E International. 39, 7, p. 562 -568

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  12. Published

    OPTIMAL PROSTHESIS TEMPERATURE IN CEMENTED TOTAL HIP ARTHROPLASTY

    Jafri, A., Green, S. M., McCaskie, A. W., Partington, P. F. & Muller, S. D., 1/10/2006, In: Journal of Bone and Joint Surgery, British Volume. 88-B, SUPP III, p. 365 1 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  13. Published

    ORTHOPAEDIC BIOPOLYMER WEAR SCREENING RIG VALIDATED AGAINST CLINICAL DATA

    Joyce, T. J., Monk, D., Thompson, P., Chiu, P., Unsworth, A. & Green, S. M., 1/10/2006, In: Journal of Bone and Joint Surgery, British Volume. 88-B, SUPP III, p. 377 1 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  14. Published

    Lancaster Virtual Prototyping Project: (GONW5167/8EUR – M4-07-LANC)

    Rennie, A. E. W., 15/11/2006, Proceedings of the 4th EU Best Practice Conference: New Horizons in Graz..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  15. Published

    Effect of beam angle on HAZ, recast and oxide layer characteristics in laser drilling of TBC nickel superalloys

    Sezer, H. K., Li, L., Schmidt, M., Pinkerton, A. J., Anderson, B. & Williams, P., 12/2006, In: International Journal of Machine Tools and Manufacture. 46, 15, p. 1972-1982 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    Free-edge and ply cracking effect in cross-ply laminated composites under uniform extension and thermal loading

    Zhang, D., Ye, J. & Sheng, H. Y., 12/2006, In: Composite Structures. 76, 4, p. 314-325 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. 2007
  18. Published

    A method and model for pulsed laser cleaning of rapid manufactured parts

    Pinkerton, A. J. & Li, K., 2007, Proceedings of the 21st International Conference on Surface Modification Technologies. Sudarshan, T. S. & Jeandin, M. (eds.). ASM International

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  19. Published

    A verified model of laser direct metal deposition using an analytical enthalpy balance method

    Pinkerton, A. J., Moat, R., Shah, K., Li, L., Preuss, M. & Withers, P. J., 2007, Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  20. Published

    An analytical model of beam attenuation and powder heating during coaxial laser direct metal deposition

    Pinkerton, A. J., 2007, In: Journal of Physics D: Applied Physics. 40, 23, p. 7323-7334 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  21. Published

    An anisotropic enhanced thermal conductivity approach for modelling laser melt pools

    Safdar, S., Pinkerton, A. J., Moat, R., Li, L., Sheikh, M. A., Preuss, M. & Withers, P. J., 2007, Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  22. Published

    Cement pressurisation in flanged and unflanged acetabular cups

    Green, S., Attar, F. G., Bhattacharya, R. & Port, A., 2007, Proceedings 8th EFORT Congress, Florence, Italy. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology, p. P486

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  23. Published

    Component repair using laser direct metal deposition

    Wang, W., Pinkerton, A. J., Wee, L. M. & Li, L., 2007, Proceedings of the 35th International MATADOR Conference. Hinduja, S. & Fan, KC. (eds.). London: Springer Verlag, p. 345-350 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  24. Published

    Effect of wind loading on low rise buildings using finite element modelling and computational fluid dynamics: A commercially focused appoach

    Taylor, S., Rennie, A. & McDonald, W., 2007, Virtual and Rapid Manufacturing: Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J. D. S. (ed.). London: Taylor & Francis Group, p. 811-816 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  25. Published

    Fixation strength of cemented Birmingham (HA coated, cementless) cups - a biomechanical study

    Green, S., Kadakia, A. & Partington, P. F., 2007, Proceedings 8th EFORT congress, Florence, Italy. European Federation of National Associations of Orthopaedics and Traumatology

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  26. Published

    From art to engineering

    O'Hana, S., Pinkerton, A. J. & Shoba, K., 2007, Proceedings of the 21st International Conference on Surface Modification Technologies. Sudarshan, T. S. & Jeandin, M. (eds.). ASM International

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  27. Published

    In vitro wear performance of MTP prostheses evaluated on a multi-station metatarso-phalangeal joint simulator

    Green, S., Joyce, T., Lee, S. & Unsworth, A., 2007, Proceedings 8th EFORT Congress. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology, p. F837

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  28. Published

    Integrating CFD and prototyping technologies in the investigation of multi-element profiles for a high-lift variable pitch vertical-axis tidal power generator

    Quayle, S. & Rennie, A., 2007, In: International Journal of Agile Systems and Management. 2, 2, p. 222-236 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Intragranular precipitation variations in laser deposited Waspaloy due to compositional inhomogeneities

    Moat, R. J., Karadge, M., Pinkerton, A. J., Deschamps, A., Bley, F., Li, L., Withers, P. J. & Preuss, M., 2007, Proceedings of the 136th TMS Annual Meeting. The Minerals, Metals & Materials Society (TMS), p. 77-86 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  30. Published

    Rapid design, prototyping and manufacture: Proceedings of the Eighth National Conference on

    Jacobson, D. M. (ed.), Bocking, C. E. (ed.) & Rennie, A. (ed.), 2007, MJA Print. 140 p.

    Research output: Book/Report/Proceedings › Book

  31. Published

    Stress distributions in multilayer laser deposited Waspaloy parts measured using neutron diffraction

    Moat, R. J., Pinkerton, A. J., Hughes, D. J., Li, L., Withers, P. J. & Preuss, M., 2007, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  32. Published

    Wear analysis of failed acetabular polyethylene: A comparison of analytical methods

    Green, S., Chuter, G. S. J., Cloke, D. J., Mohamed, A. & Partington, P. F., 2007, Proceedings 8th EFORT Congress, Florence. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  33. Unpublished

    Feasibility study for tomographic walk-through metal detector.

    Ma, X., Peyton, A. J. & Lionheart, W. R. B., 01/2007, (Unpublished) Unpublished, 12 p.

    Research output: Working paper

  34. Unpublished

    Virtual Prototyping Phase III

    Rennie, A., 01/2007, (Unpublished) N/A. 54 p.

    Research output: Book/Report/Proceedings › Commissioned report

  35. Published

    Wear analysis of failed acetabular polyethylene: a comparison of analytical methods

    Chuter, G. S. J., Cloke, D. J., Mahomed, A., Partington, P. F. & Green, S. M., 02/2007, In: Journal of Bone and Joint Surgery, British Volume. 89B, 2, p. 273-279 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    Failure of pultruded GRP single-bolt tension joints under hot-wet conditions.

    Turvey, G. & Wang, P., 1/02/2007, In: Composite Structures. 77, 4, p. 514-520 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    Absorption saturation properties and laser Q-switch performance of Cr5+-doped YVO4 crystal

    Zolotovskaya, S., Yumashev, K. V., Kuleshov, N. V., Matrosov, V. N., Matrosova, T. A. & Kupchenko, M. I., 03/2007, In: Applied Physics B. 86, 4, p. 667-671 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Published

    Biomechanical testing of the locking compression plate: When does the distance between bone and implant significantly reduce construct stability?

    Ahmad, M., Nanda, R., Bajwa, A. S., Candal-Couto, J., Green, S. & Hui, A. C., 03/2007, In: Injury. 38, 3, p. 358-364 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  39. Published

    Imaging internal structure with electromagnetic induction tomography.

    Ma, X., Peyton, A. J., Soleimani, M. & Lionheart, W. R. B., 12/03/2007, Instrumentation and Measurement Technology Conference, 2006. IMTC 2006. Proceedings of the IEEE. IEEE, p. 299 -303

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  40. Published

    Opening mode failure of pultruded GRP angle leg junctions

    Turvey, G. & Zhang, Y., 30/04/2007, p. 389-393. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  41. Published

    Interfacial shear stress in FRP-plated RC beams under symmetric loads

    Yang, J., Ye, J. & Niu, Z., 05/2007, In: Cement and Concrete Composites. 29, 5, p. 421-432 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  42. Published

    Coincident wire and powder deposition by laser to form compositionally graded material

    Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 21/05/2007, In: Surface and Coatings Technology. 201, 16-17, p. 7083-7091 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Published

    Nucleation of CdTe thin films deposited by close-space sublimation under a nitrogen ambient

    Major, J. D., Proskuryakov, Y. Y., Durose, K. & Green, S., 31/05/2007, In: Thin Solid Films. 515, 15, p. 5828-5832 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  44. Published

    Parametric study of semi-rigid composite connections with 3-D finite element approach

    Fu, F., Lam, D. & Ye, J., 06/2007, In: Engineering Structures. 29, 6, p. 888-898 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  45. Published

    Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener

    Turvey, G. & Salehi, M., 26/06/2007. 27 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  46. Published

    Effect of hole clearance on bolt loads in pultruded GRP tension joints

    Turvey, G. & Wang, P., 8/07/2007. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  47. Published

    A transnational approach to the implementation of eco-design methodologies in SMEs

    Rennie, A., Lambert, C., Baker, N. & Hjelm, O., 10/07/2007, The proceedings of the 5th International Conference on Design & Manufacture for Sustainable Development : Loughborough University, 10th - 11th July 2007.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  48. Published

    High power all-quantum-dot-based external cavity modelocked laser

    McRobbie, A. D., Cataluna, M. A., Zolotovskaya, S., Livshits, D. A., Sibbett, W. & Rafailov, E. U., 19/07/2007, In: Electronics Letters. 43, 15, p. 812-813 2 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  49. Published

    Single-step laser deposition of functionally graded coating by dual 'wire-powder' or 'powder-powder' feeding: a comparative study

    Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 31/07/2007, In: Applied Surface Science. 253, 19, p. 7926-7931 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  50. Published

    Properties degradation induced by transverse cracks in general symmetric laminates

    Zhang, D., Ye, J. & Lam, D., 15/08/2007, In: International Journal of Solids and Structures. 44, 17, p. 5499-5517 19 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  51. Published

    Developments of multiple frequency electromagnetic induction system for steel flow visualization.

    Ma, X., Peyton, A. J., Higson, S. R. & Drake, P., 09/2007. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  52. Published

    Dynamic magnetic induction tomography imaging of molten metal flow using the Kalman filter.

    Soleimani, M., Ma, X. & Peyton, A. J., 09/2007. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

Previous 1...3 4 5 6 7 8 9 10 ...21 Next

Back to top