Home > Research > Manufacturing > Publications & Outputs

Research

View graph of relations

Manufacturing

201 - 300 out of 1,001Page size: 100
RSS feed of this list
Sort by: Title
  1. Published

    Cold sprayed metal-ceramic coatings using satellited powders

    Al-Hamdani, K. S., Murray, J. W., Hussain, T., Kennedy, A. & Clare, A. T., 1/07/2017, In: Materials Letters. 198, p. 184-187 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  2. Published

    Combined finite strip and beam elements for double tee slabs

    Abou Ghadeer, M., Ye, J. & Mansouri, A. H., 2003, Proceedings of the Ninth International Conference on Civil and Structural Engineering Computing: Egmond-aan-Zee, the Netherlands, 2-4 September 2003 . Topping, B. H. V. (ed.). Stirling: Civil-Comp Press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  3. Published

    Combined vibration and thermal analysis for the condition monitoring of rotating machinery

    Nembhard, A., Sinha, J., Pinkerton, A. & Elbhbah, K., 05/2014, In: Structural Health Monitoring. 13, 3, p. 281-295 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    Combined wire and powder feeding laser direct metal deposition for rapid prototyping

    Syed, W. U. H., Pinkerton, A. J. & Li, L., 2004, Proceedings of the 23rd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  5. Published

    Combining wire and coaxial powder feeding in laser direct metal deposition for rapid prototyping

    Syed, W. U. H., Pinkerton, A. J. & Li, L., 30/04/2006, In: Applied Surface Science. 252, 13, p. 4803-4808 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    Comparative analysis of bone cement fracture surfaces

    Green, S., Liu, C., Watkins, N. D. & McCaskie, A. W., 2000, 11th International Conference on Deformation, Yield and Fracture of Polymers : 10 - 13 April 2000, Churchill College, Cambridge, UK.. Cambridge : IOM communications, p. 325-328 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  7. Published

    Comparative evaluation of optimum additive manufacturing technology to fabricate medical bespoke prototypes obtained with composite materials

    Ulmeanu, M., Doicin, C., Baila, D., Rennie, A. E. W., Neagu, C. & Laha, S., 03/2015, In: Revista de Materiale Plastice. 52, 3, p. 416-422 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    Comparing Carbon Footprint Methodologies for SMEs

    Moss, J., Lambert, C. & Rennie, A., 08/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  9. Published

    Comparison of cement pressurisation in flanged and unflanged acetabular cups

    Bhattacharya, R., Attar, F. G., Green, S. & Port, A., 3/02/2012, In: Journal of Orthopaedic Surgery and Research. 7, 1, 5 p., 5.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  10. E-pub ahead of print

    Comparison of Fixation Techniques in Oblique and Biplanar Chevron Medial Malleolar Osteotomies: a Finite Element Analysis

    Levent, A., Yapti, M., Celik, H. K., Kose, O., Kılıçaslan, Ö. F. & Rennie, A., 23/07/2021, (E-pub ahead of print) In: The Journal of Foot and Ankle Surgery. YJFAS 53575.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. Published

    Comparison of Galvanometer and Polygon Scanning Systems on Component Production Rates in Selective Laser Sintering

    King, B., Rennie, A. E. W. & Bennett, G. R., 27/04/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  12. Published

    Component repair using laser direct metal deposition

    Wang, W., Pinkerton, A. J., Wee, L. M. & Li, L., 2007, Proceedings of the 35th International MATADOR Conference. Hinduja, S. & Fan, K. (eds.). London: Springer Verlag, p. 345-350 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  13. Published

    Component repair using laser direct metal deposition

    Pinkerton, A. J., Wang, W. & Li, L., 07/2008, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 222, 7, p. 827-836 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    Composite Behaviour of Headed Stud Shear Connectors in Pairs with Profiled Metal Deck Flooring

    Lam, D., Ye, J. & Qureshi, J., 2010, 4th International Conference on Steel & Composite Structures.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  15. Published

    Composite Risers – an offshore deepwater solution

    Amaechi, C. V. & Ye, J., 7/05/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  16. Published

    Composite risers for deep waters using a numerical modelling approach

    Amaechi, C. V., Gillett, N., Odijie, A. C., Hou, X. & Ye, J., 15/02/2019, In: Composite Structures. 210, p. 486-499 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. Published

    Compression failure mode of two CMW bone cements

    Green, S., Liu, C., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 2001, European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001.. London: European Society for Biomaterials, p. P51

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  18. Published

    Compression moulding and injection over moulding of porous PEEK components

    Siddiq, A. & Kennedy, A. R., 1/11/2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 111, 10 p., 103996.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    Compressive performance and deterioration mechanism of ultra-high performance concrete with coarse aggregates under and after heating

    Xue, C., Yu, M., Xu, H., Xu, L., Mohamed, S. & Ye, J., 1/04/2023, In: Journal of Building Engineering. 64, 20 p., 105502.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    Computer Aided Material Selection (CAMS) for Additive Manufacturing Materials

    Smith, P. & Rennie, A., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 55-61 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  21. Published

    Computer aided material selection for additive manufacturing materials

    Smith, P. & Rennie, A., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 209-213 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    Condition monitoring of rotating machines using vibration and bearing temperature measurements

    Nembhard, A., Sinha, J., Pinkerton, A. & Elbhbah, K., 2014, Advances in Condition Monitoring of Machinery in Non-stationary Operations: Proceedings of the 3rd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations (CMMN02013). Dalpiaz, G., Rubini, R., D'Elia, G., Cocconcelli, M., Chaari, F., Zimroz, R. & Bartelmus, W. (eds.). Berlin: Springer Verlag, p. 159-169 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  23. Published

    Condition monitoring of wind turbines based on extreme learning machine

    Qian, P., Ma, X. & Wang, Y., 12/09/2015, ICAC2015: Proceedings of the 21st International Conference on Automation and Computing. IEEE, p. 37-42 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  24. Unpublished

    Consultancy and Support: Computer Aided Design & Engineering: (incorporating the Rapid Manufacturing North West & Sustainable Product Development sub-Projects) - Lancaster University Final Report

    Rennie, A., 10/2008, (Unpublished) N/A. 129 p.

    Research output: Book/Report/Proceedings › Commissioned report

  25. Published

    Control systems for WRASPA.

    Chaplin, R., Rahmati, R., Gunura, K., Ma, X. & Aggidis, G. A., 06/2009. 93 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  26. Published

    Controlled modification of optical and structural properties of glass with embedded silver nanoparticles by nanosecond pulsed laser irradiation

    Fleming, L. A. H., Tang, G., Zolotovskaya, S. & Abdolvand, A., 14/04/2014, In: Optical Materials Express. 4, 5, p. 969-975 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    Copper and copper selenide nanoparticles in the sol-gel matrices: structural and optical

    Gurin, V. S., Alexeenko, A. A., Zolotovskaya, S. & Yumashev, K. V., 07/2006, In: Materials Science and Engineering: C . 26, 5-7, p. 952-955 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  28. Published

    Creep behavior comparison of CMW1 and palacos R-40 clinical bone cements

    Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J., McCaskie, A. W. & Mccaskie, A. W., 11/2002, In: Journal of Materials Science: Materials in Medicine. 13, 11, p. 1021-1028 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Cross-stiffened circular plates: an elasto-plastic large deflection analysis

    Turvey, G., 14/09/2010.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  30. Published

    Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy

    Moat, R. J., Pinkerton, A. J., Li, L., Withers, P. J. & Preuss, M., 02/2009, In: Acta Metallurgica et Materialia. 57, 4, p. 1220-1229 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    Cytocompatibility evaluation of surface modified Ni-Ti shape memory alloy using the MTT assay

    Green, S. M., Grant, D. M. & Wood, J. V., 25/04/2000, In: Biomedical Engineering - Applications, Basis and Communications. 12, 2, p. 55-59 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    Cytomcompatibility evaluation of surface modified Ni-Ti shape memory alloy using the MTT assay

    Green, S., Grant, D. M. & Wood, J. V., 2000, Processing and fabrication of advanced materials VIII : proceedings of a symposium ... September 8-10, 1999, Mandarin Hotel, Orchard Road, Singapore . Khor, K. A. (ed.). Singapore: World Scientific Publishing, p. 141-148 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  33. Published

    Data-driven Process Parameter Optimisation for Laser Wire Metal Additive Manufacturing

    Roberts, M., Xia, M. & Kennedy, A., 10/10/2022, Proceedings of the 27th International Conference on Automation & Computing. IEEE, p. 1-6 6 p. 124

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  34. Published

    Decay rate of boundary effects in laminated composite cylinders and cylindrical panels.

    Ye, J., 1998, Proceedings of the 1998 ASME Engineering Systems Design and Analysis (ESDA) Conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  35. Published

    Decay rate of edge effects in cross-ply-laminated hollow cylinders

    Ye, J. Q., 02/2001, In: International Journal of Mechanical Sciences. 43, 2, p. 455-470 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    Deep tillage tool optimization by means of finite element method: Case study for a subsoiler tine

    Topakci, M., Celik, H. K., Canakci, M., Rennie, A., Akinci, I. & Karayel, D., 04/2010, In: Journal of Food, Agriculture and Environment. 8, 2, p. 531-536 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    Deformation behaviour simulation of an apple under drop case by finite element method

    Celik, H. K., Rennie, A. & Akinci, I., 05/2011, In: Journal of Food Engineering. 104, 2, p. 293-298 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Published

    Deformation of materials

    Green, S. M., 02/2006, In: Current Orthopaedics. 20, 1, p. 9-15 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  39. Published

    Deformation simulation of a tyre safety cage in testing of agricultural vehicle tyres

    Celik, H. K., Rennie, A. E. W., Dawson, D., Eatough, A., Eatough, J. & Akinci, I., 05/2015, Environmentally Friendly Agriculture and Forestry for Future Generations: International Scientific XXXVI CIOSTA & CIGR Section V Conference 2015. Popov, V. D., Belyakov, V. V., Efimov, V. A., Selikhovkin, A. V., Shirokov, S. N., Ovchinnikova, E. I., Maksimov, D. A., Levchenko, L. V., Smelik, V. A., Ruzhev, V. A., Korostelev, A. A., Lepp, N. V., Shaytarova, O. E. & Belinskaya, I. V. (eds.). St Petersburg, Russian Federation: Saint Petersburg State Agrarian University, p. 172-183 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  40. Published

    Deformation simulation of additive manufacturing FDM parts: a case study for greenhouse clips

    Celik, H. K., Hambali, R. H., Rennie, A. & Akinci, I., 06/2011, Rapid Design Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 155-162 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  41. Published

    Delivering eco design business support to SMEs on a transnational scale: benefits and learning outcomes

    Lambert, C., Rennie, A., Baker, N. & Hjelm, O., 7/11/2007. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  42. Published

    Delivering Regional Eco-Innovation through Knowledge Exchange

    Lambert, C. & Rennie, A., 25/10/2011. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  43. Published

    Design and Additive Manufacturing of a Medical Face Shield for Healthcare Workers Battling Coronavirus (COVID-19)

    Celik, H. K., Kose, O., Ulmeanu, M.-E., Rennie, A., Abram, T. & Akinci, I., 7/08/2020, In: International Journal of Bioprinting. 6, 4, 21 p., 286.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  44. Published

    Design and analysis method of nonlinear helical springs using a combining technique: Finite element analysis, constrained Latin hypercube sampling and genetic programming

    Gu, Z., Hou, X. & Ye, J., 1/11/2021, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 235, 22, p. 5917-5930 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  45. Published

    Design and development of a novel multistation MTP joint simulator for in vitro testing

    Green, S., Lee, S., Joyce, T. & Unsworth, A., 2006, p. P137.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  46. Published

    Design and fabrication of cranioplasty prostheses: fit evaluation between phantom-based haptic environment and Materialise 3-Matic Software

    Hasib, H., Yahaya, S. H., Mohamad, A. K., Bani Hashim, A. Y., Ali Mokhtar, N. & Simha, S. S., 2013, In: Journal of Advanced Manufacturing Technology. 7, 1, p. 87-96 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  47. Unpublished

    Design and fabrication of novel, geometrically optimised conical inline filters/strainers for use in the process industries.

    Vijayakumar, B., 7/10/2020, (Unpublished) Lancaster University. 308 p.

    Research output: Thesis › Doctoral Thesis

  48. Published

    Design and operation of a compact 1 MeV X-band Linac

    Burt, G., Ambattu, P., Lingwood, C., Abram, T., Burrows, I., Corlett, P., Goulden, A., Hartnett, T., Hindley, P., McIntosh, P. A., Middleman, K., Saveliev, Y., Smith, R. & White, C., 2012, Proceedings of LINAC2012, Tel-Aviv, Israel. p. 183-185 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  49. Published

    Design and structural optimisation of a tractor mounted telescopic boom crane

    Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 39, 3, p. 909-924

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  50. Published

    Design for Manufacture using Functional Analysis and CAD Mould Simulation for Rapid Prototyping and Rapid Tooling: Paper: ESDA2012-82410

    Lupeanu, M., Brooks, H., Rennie, A., Celik, K., Neagu, C. & Akinci, I., 07/2012, ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2012): Proceedings of the . Nantes: American Society of Mechanical Engineers (ASME), 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  51. Published

    Design of a radio frequency heated isothermal micro-trickle bed reactor

    Aiouache, F., 1/05/2014, In: Chemical Engineering Journal. 243, p. 225-233 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  52. Published

    Design of a reconfigurable platform for navigation signal simulation

    Ming, D., Zhong, X., Liu, L. & Ma, X., 2013, In: Journal of Networks. 8, 5, p. 1019-1026 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  53. Published

    Design of a reconfigurable platform for navigation signal simulation

    Ming, D., Zhong, X., Ma, X. & Liu, L., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  54. Published

    Design of paired column semisubmersible hull

    Odijie, C., 2016, Lancaster University. 205 p.

    Research output: Thesis › Doctoral Thesis

  55. Published

    Design templates for consumer use in customising additive layer manufactured products

    Ariadi, Y. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 137-144 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  56. Published

    Design, innovation and a new age for filtration

    Burns, N., Geekie, L., Travis, D., Burns, M. & Rennie, A., 06/2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  57. Published

    Designing advanced filtration media through metal additive manufacturing

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 02/2015. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  58. Published

    Designing advanced filtration media through metal additive manufacturing

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A. E. W., 03/2016, In: Chemical Engineering and Technology. 39, 3, p. 535-542 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  59. Published

    Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve

    Celik, K., Rennie, A., Karayel, D. & Akinci, I., 09/2011, In: Journal of Agricultural Machinery Science. 7, 3, p. 231-239 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  60. Published

    Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve

    Celik, H. K., Rennie, A., Karayel, D. & Akinci, I., 09/2011, p. 59. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  61. Published

    Determination of head losses in drip irrigation laterals with cylindrical in-line type emitters through CFD analysis

    Celik, K., Karayel, D., Lupeanu, M., Rennie, A. E. W. & Akinci, I., 20/02/2015, In: Bulgarian Journal of Agricultural Science. 21, 3, p. 703-710 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  62. Published

    Determination of the effect of part orientation to the strength value on additive manufacturing FDM for end-use parts by physical testing and validation via three-dimensional finite element analysis

    Hambali, R. H., Smith, P. & Rennie, A., 2012, In: International Journal of Materials Engineering Innovation. 3, 3-4, p. 269-281 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  63. Published

    Determination of the Failure Susceptibility of a Flat Die used in Biomass Pelletizing Machines by means of FEA based Design Exploration

    Celik, H. K., Yilmaz, H., Rennie, A. E. W., Cinar, R. & Firat, M. Z., 10/2018, In: Journal of Failure Analysis and Prevention. 18, 5, p. 1099-1110 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  64. Published

    Determination of Time Dependent Stress Distribution on a Potato Tuber during Drop Case

    Caglayan, N., Oral, O., Celik, H. K., Cinar, R., Rodrigues, L. C. D. A., Rennie, A. E. W. & Akinci, I., 11/2018, In: Journal of Food Process Engineering. 41, 7, 7 p., e12869.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  65. Published

    Determining Residential Location Choice along the Coastline in Victoria Island, Nigeria Using a Factor Analytical Approach

    Ayoola, A. B., Oyetunji, A. K., Amaechi, C. V., Olukolajo, M. A., Ullah, S., Kemiki, O. A. & Lee, C. L. (Editor), 12/06/2023, In: Buildings. 13, 6, 1513.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  66. Published

    Determining the instantaneous bruising pattern in a sample potato tuber subjected to pendulum bob impact through finite element analysis

    Celik, H. K., Akinci, I., Erkan, M. & Rennie, A., 31/07/2023, In: Journal of Food Process Engineering. 46, 11, 14 p., e14424.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  67. Published

    Developing novel structural composites from recycled materials

    Sotayo, A., Green, S. & Turvey, G., 16/12/2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  68. Unpublished

    Development and characterisation of novel structural composites from recycled materials

    Sotayo, A., 2016, (Unpublished) Lancaster University. 263 p.

    Research output: Thesis › Doctoral Thesis

  69. Published

    Development of a Continuous Droplet Generation System of Molten Metals using Electromotive Forces, with a View to its use in the Rapid Tooling Industry

    Rennie, A. & Bennett, G. R., 07/1997, Proceedings of the Thirty-Second International Manufacturing, Automation and Systems, Technology, Applications, Design, Organisation and Management, Research (MATADOR) Conference. p. 399-403 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  70. Published

    Development of a fast electromagnetic induction tomography system for metal process applications.

    Ma, X., Higson, S. R., Lyons, A. & Peyton, A. J., 09/2005. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  71. Published

    Development of a Motion Tracking 3D CAD Input System

    Abram, T., Benachour, P. & Vuong, T., 12/06/2009, p. 109-116. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  72. Published

    Development of a novel feature based manufacturability assessment system for high-volume injection moulding tool inserts

    El Kashouty, M., 2020, Lancaster University.

    Research output: Thesis › Doctoral Thesis

  73. Published

    Development of a virtual instrument system for industrial process tomography.

    Deloughry, R., Davenport, I., Ma, X. & Ponnapalli, P. V. S., 09/2003. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  74. Published

    Development of an Additive Layer Manufacturing (ALM) selection tool for direct manufacture of products

    Smith, P. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 507-518 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  75. Published

    Development of an Additive Layer Manufacturing business model: creating an environment to support designers from concept to distribution

    Ariadi, Y., Hasan, S., Smith, P. & Rennie, A., 06/2008, Proceedings of 32nd Japan Rapid Prototyping Symposium. p. 79-84 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  76. Published

    Development of an Additive Layer Manufacturing Selection Tool for Rapid Manufacturing Applications

    Smith, P. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 69-79 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  77. Published

    Development of an Engineering Design Academy: Increasing the commercial exposure of undergraduate students

    Lambert, C. & Rennie, A., 09/2013, Proceedings of The 30th International Manufacturing Conference: Professional Development of Engineers for Advanced Manufacturing. Dublin, Ireland, p. 473-482 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  78. Published

    Development of communication simulation software for TMS32010 multi-processor parallel system

    Ma, X. & Wu, J., 1991, In: Industrial Control Computer. p. 37-39 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  79. Published

    Development of database for checking fixtures for automotive parts

    Abdullah, Z., Imran, S., Amran, M., Hasib, H., Muhammad, N. S. & Jaafar, R., 2015, In: Applied Mechanics and Materials. 761, p. 37-41 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  80. Published

    Development of metal matrix composites by direct energy deposition of ‘satellited’ powders

    Farayibi, P. K., Abioye, T. E., Kennedy, A. & Clare, A. T., 1/09/2019, In: Journal of Manufacturing Processes. 45, p. 429-437 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  81. Published

    Development of multiple frequency electromagnetic induction systems for steel flow visualization.

    Ma, X., Peyton, A. J., Higson, S. R. & Drake, P., 24/07/2008, In: Measurement Science and Technology. 19, 9, 10 p., 094008.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  82. Published

    Development of novel Composite Riser for Offshore Deep Water Applications & Hydrodynamics

    Amaechi, C. V. & Ye, J., 16/04/2021.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  83. Published

    Development, Characterisation and Finite Element Modelling of Novel Waste Carpet Composites for Structural Applications

    Sotayo, A., Green, S. & Turvey, G., 10/05/2018, In: Journal of Cleaner Production. 183, p. 686-697 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  84. Published

    Developments of multiple frequency electromagnetic induction system for steel flow visualization.

    Ma, X., Peyton, A. J., Higson, S. R. & Drake, P., 09/2007. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  85. Published

    Digital power system simulators applied to protective relay testing

    Wu, J., Liang, Z., Ma, X. & Wang, H., 11/1993, In: Dianli Xitong Zidonghue/Automation of Electric Power Systems. 17, 11, p. 47-51 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  86. Published

    Diode laser deposition of microstructurally graded components using gas- and water-atomised powder blends

    Pinkerton, A. J., Syed, W. U. H. & Li, L., 2004, Proceedings of the 23rd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  87. Published

    Diode laser metal deposition: The effect of pulsed beam parameters on superalloy microstructure and deposit morphology

    Pinkerton, A. J., Moat, R. J., Li, L., Preuss, M. & Withers, P., 2006, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  88. Published

    Diode-pumped Yb,Er:glass laser passively Q switched with a V3+:YAG crystal

    Zolotovskaya, S., Yumashev, K. V., Kuleshov, N. V. & Sandulenko, A. V., 21/03/2005, In: Applied Optics. 44, 9, p. 1704-1708 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  89. Published

    Direct additive laser manufacturing using gas- and water-atomised H13 tool steel powders

    Pinkerton, A. J. & Li, L., 2005, In: International Journal of Advanced Manufacturing Technology. 25, 5-6, p. 471-479 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  90. Published

    Direct diode laser deposition of functionally graded Ti-6AL-4V and inconel 718 components

    Shah, K., Pinkerton, A. J., Moat, R., Li, L. & Preuss, M., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 273-278 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  91. Published

    Direct laser deposited titanium with controlled porosity for bone tissue engineering

    Pinkerton, A. J., Paul, C. P., Iravani-Tabrizipoor, M., Kukreja, L. M. & Khajepour, A., 2008, Proceedings of the 27th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 421-430 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  92. Published

    Direct laser deposition layer profiles and the factors affecting them

    Pinkerton, A. J. & Li, L., 2002.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  93. Published

    Direct laser deposition with different types of 316L steel particle: a comparative study of final part properties

    Mahmood, K. & Pinkerton, A., 04/2013, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 227, 4, p. 520-531 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  94. Published

    Direct metal deposition by diode laser: modelling the effect of increased beam coupling

    Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  95. Published

    Discrete element method for generating random fibre distributions in micromechanical models of fibre reinforced composite laminates

    Ismail, Y., Yang, D. & Ye, J., 1/04/2016, In: Composites Part B: Engineering. 90, p. 485-492 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  96. Published

    Discrete Element Method Simulation of the Damage Evolution in Cross-Ply Laminate under Tensile Loading

    Yang, D., Ye, J., Tan, Y. Q. & Sheng, Y., 2010, The Tenth International Conference on Computational Structures Technology. Topping, B. H. V., Adam, J. M., Pallares, F. J., Bru, R. & Romero, M. L. (eds.). Stirling: Civil-Comp Press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  97. Published

    Discrete element modeling of metal skinned sandwich composite panels subject to uniform load

    Zha, X., Wan, C., Fan, Y. & Ye, J., 1/03/2013, In: Computational Materials Science. 69, p. 73-80 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  98. Published

    Discrete element modeling of the microbond test of fiber reinforced composite

    Yang, D., Sheng, Y., Ye, J. & Tan, Y., 08/2010, In: Computational Materials Science. 49, 2, p. 253-259 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  99. Published

    Discrete element modelling of unidirectional fibre-reinforced polymers under transverse tension

    Ismail, Y., Sheng, Y., Yang, D. & Ye, J., 05/2015, In: Composites Part B: Engineering. 73, p. 118-125 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  100. Published

    DOES THE CLINICAL ENVIRONMENT INFLUENCE THE PROPERTIES OF BONE CEMENT?

    Burt, N., Green, S. M., Sandher, D. S. & Gregg, P. J., 1/01/2003, In: Journal of Bone and Joint Surgery, British Volume. 85-B, SUPP I, p. 13-14 2 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

Previous 1 2 3 4 5 6 7 8 ...11 Next

Back to top