Manufacturing

View graph of relations

901 - 1000 out of 1,001Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Title

Published
The effect of diode laser beam shape and traverse direction on the direct metal deposition process
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The effect of joint configuration on the strength and stress distributions of dissimilar adhesively bonded joints
Yousefi Kanani, A., Hou, X. & Ye, J., 1/01/2021, In: Engineering Structures. 11 p., 111322.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The effect of laser beam geometry on cut path deviation in diode laser chip-free cutting of glass
Nisar, S., Sheikh, M. A., Li, L., Pinkerton, A. J. & Safdar, S., 2010, In: Journal of Manufacturing Science and Engineering. 132, 1, 9 p., 011002.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The effect of laser pulse width on multiple-layer 316L steel clad microstructure and surface finish
Pinkerton, A. J. & Li, L., 15/03/2003, In: Applied Surface Science. 208-209, p. 411-416 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The effect of powder recycling in direct metal laser deposition on powder and manufactured part characteristics
Carroll, P. A., Pinkerton, A. J., Allen, J., Syed, W. U. H., Sezer, H. K., Brown, P., Ng, G., Scudamore, R. & Li, L., 2006, Proceedings of AVT-139 Specialists Meeting on Cost Effective Manufacture via Net Shape Processing. NATO Research and Technology Organisation
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The effect of process parameters on residual stresses within an inconel 718 part produced by the Direct Laser Deposition process
Pinkerton, A. J., Shackleton, J., Moat, R., Li, L., Withers, P., Preuss, M., Allen, J., Hilton, P. & Folwell, R., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 601-610 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The Fabrication of Electronic Packages from High Silicon Aluminium Alloys Using Thin Shell Electroformed (TSE) EDM Electrodes
Rennie, A. E. W., Bennett, G., Bocking, C. & Jacobson, D., 1/05/2002, In: Transactions of the Institute of Metal Finishing. 80, 3, p. 92-96 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The Fabrication of MMC Electronic Packages using Thin Shell Electroformed (TSE) EDM Electrodes
Bocking, C., Jacobson, D. M., Rennie, A. & Bennett, G., 10/2001. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
The friction and lubrication of alumina-on-alumina total hip prostheses - The effect of radial clearance and wear testing.
Scholes, S. C., Green, S. M. & Unsworth, A., 2001, In: Key Engineering Materials. 218-220, p. 535-540 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The influence of joints and composite floor slabs on effective tying of steel structures in preventing progressive collapse
Yu, M., Zha, X. & Ye, J., 03/2010, In: Journal of Constructional Steel Research. 66, 3, p. 442-451 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The influence of notching and mixed-adhesives at the bonding area on the strength and stress distribution of dissimilar single-lap joints
Yousefi Kanani, A., Hou, X. & Ye, J., 1/06/2020, In: Composite Structures. 241, 10 p., 112136.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The influence of opsonins on cellular reaction to polyethylene wear particles
Elfick, A., Birch, M., Green, S. & McCaskie, A., 1/12/2002, In: European Cells and Materials. 4, SUPPL. 2, 1 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The influence of powder stream shape and substrate position on mass addition in laser cladding
Ibarra-Medina, J. & Pinkerton, A. J., 2010, Proceedings of the 24th International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The influence of profiled sheeting thickness and shear connector's position on strength and ductility of headed shear connector
Qureshi, J., Lam, D. & Ye, J., 05/2011, In: Engineering Structures. 33, 5, p. 1643-1656 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The influence of radial clearance and wear testing on the tribology of alumina-alumina total hip prostheses
Green, S., Scholes, S. C. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/037
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The lost crown of Horus
Kaufman, J. & Rennie, A. E. W., 04/2015, Ancient Egypt, 15, 5, p. 22-23 2 p.
Research output: Contribution to specialist publication › Article
Published
The morphology of UHMWPE wear debris released from shoulder prostheses
Green, S., Elfick, A. P., Frostick, S. P. & Unsworth, A., 2002, p. 105. 1 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
The nature and dissemination of UHMWPE wear debris retrieved from periprosthetic tissue of THR.
Elfick, A. P. D., Green, S. M., Krikler, S. & Unsworth, A., 1/04/2003, In: Journal of Biomedical Materials Research Part A. 65, 1, p. 95-108 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The processing and properties of syntactic Al foams containing low cost expanded glass particles
Wright, A. & Kennedy, A. R., 11/2017, In: Advanced Engineering Materials. 19, 11, 6 p., 1600467.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The quantitative assessment of UHMWPE wear debris produced in hip simulator testing: the influence of head material and roughness, motion and loading.
Elfick, A. P. D., Smith, S. L., Green, S. M. & Unsworth, A., 06/2001, In: Wear. 249, 5-6, p. 517-527 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The role of technical functional analysis in innovative design of bespoke rapid manufactured parts: medical industry applications
Lupeanu, M., Rosu, M.-M., Rennie, A., Neagu, C. & Brooks, H., 06/2013, Advances in Production, Automation and Transportation Systems: Proceedings of the 6th WSEAS International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS13) and 4th International Conference on Automotive and Transportation Systems (ICAT13). Brasov, Romania: WSEAS Press, Vol. 13. p. 227-232 6 p. (Mathematics and Computers in Science and Engineering Series; vol. 13).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
The significance of deposition point standoff variations in multiple-layer coaxial laser cladding (coaxial cladding standoff effects)
Pinkerton, A. J. & Li, L., 05/2004, In: International Journal of Machine Tools and Manufacture. 44, 6, p. 573-584 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The significance of melt pool variables in laser direct deposition of functionally graded aerospace alloys
Shah, K., Salman, A., Pinkerton, A. J. & Li, L., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 569-576 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Unpublished
The SME Carbon Game: Issues faced when developing a Carbon Footprint Toolkit for SMEs
wrigley, S., Lambert, C. & Rennie, A., 06/2008, (Unpublished). 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
The state of additive manufacturing in dental research – A systematic scoping review of 2012–2022
Celik, H. K., Koc, S., Kustarci, A., Caglayan, N. & Rennie, A., 20/06/2023, In: Heliyon. 9, 6, 13 p., e17462.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The surface performance of shot peened and ion implanted NiTi shape memory alloy
Grant, D. M., Green, S. M. & Wood, J. V., 03/1995, In: Acta Metallurgica et Materialia. 43, 3, p. 1045-1051 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
The UK Business Support Simplification Programme: A Case Study for the North West Universities Association from Lancaster University : Invited paper for the UK consultation process for DBERR's initiative to streamline business support services
Lambert, C., Rennie, A. & Williams, D., 2008, (Unpublished) 10 p.
Research output: Working paper
Published
The use of additive manufacture for metallic bipolar plates in polymer electrolyte fuel cell stacks
Dawson, R., Patel, A., Rennie, A. & White, S., 28/09/2014, In: Chemical Engineering Transactions. 41, p. 175-180 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
THE WEAR OF ALUMINA-ON-ALUMINA TOTAL HIP PROSTHESES
Scholes, S. C., Green, S. M. & Unsworth, A., 1/04/2004, In: Journal of Bone and Joint Surgery, British Volume. 86-B, SUPP IV, p. 403 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
The wear of High Speed Selective Jet Electrodeposition electrodes when used as EDM tools
Dover, S. J., Rennie, A. & Bennett, G. R., 11/1996, Proceedings of the Second National Conference on developments in rapid prototyping and tooling. Mechanical Engineering Publications Ltd, p. 187-199 13 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
The wear of metal-on-metal total hip prostheses measured in a hip simulator.
Scholes, S. C., Green, S. M. & Unsworth, A., 06/2001, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 215, 6, p. 523-530 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Theoretical analysis of the coincident wire-powder laser deposition process
Pinkerton, A. J., Syed, W. U. H. & Li, L., 12/2007, In: Journal of Manufacturing Science and Engineering. 129, 6, p. 1019-1027 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Thermal and microstructural aspects of the laser direct metal deposition of waspaloy
Pinkerton, A. J., Karadge, M., Syed, W. U. H. & Li, L., 08/2006, In: Journal of Laser Applications. 18, 3, p. 216-226 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Thermo electroelastic solutions for surface bone remodeling under axial and transverse loads
Qin, Q. H., Qu, C. Y. & Ye, J. Q., 11/2005, In: Biomaterials. 26, 33, p. 6798-6810 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Thermoelectric magnetohydrodynamic control of melt pool flow during laser directed energy deposition additive manufacturing
Fan, X., Fleming, T. G., Rees, D. T., Huang, Y., Marussi, S., Leung, C. L. A., Atwood, R. C., Kao, A. & Lee, P. D., 5/06/2023, In: Additive Manufacturing. 71, 103587.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Thermoelectroelastic solutions for internal bone remodeling under axial and transverse loads
Qin, Q. H. & Ye, J. Q., 05/2004, In: International Journal of Solids and Structures. 41, 9-10, p. 2447-2460 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Thin plates of variable thickness with linear flexural rigidity
Ye, J. & Xiao, H., 04/1989, In: Communications in Applied Numerical Methods. 5, 3, p. 153-158 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Three dimensional analytical and finite element methods for simulating a moving melt pool with mass addition
Pinkerton, A. J., Kamara, A. M., Shah, K., Safdar, S. & Li, L., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 369-374 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Three-dimensional buckling analysis of laminated composite hollow cylinders and cylindrical panels
Ye, J. & Soldatos, K. P., 07/1995, In: International Journal of Solids and Structures. 32, 13, p. 1949-1962 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Three-dimensional buckling analysis of orthotropic cylinders subjected to thermo-mechanical loadings.
Soldatos, K. P. & Ye, J., 1995, Homogeneity and Nonlinearity in Solid Mechanics . Parker, D. F. & England, A. H. (eds.). Kluwer Academic Publishers, (Solid Mechanics and Its Applications; vol. 39).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Three-Dimensional Discrete Element Modeling of the Damage Behaviour of Cross-Ply Laminate under Low-Velocity Impact
Yang, D., Tan, Y. Q., Ye, J. & Sheng, Y., 2009, In: Civil-Comp Proceedings. 91, Paper 191.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Three-dimensional finite strip analysis of laminated panels
Attallah, K. M. Z., Ye, J. Q. & Sheng, H. Y., 12/2007, In: Computers and Structures. 85, 23-24, p. 1769-1781 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Three-dimensional Modeling of Stress Transfer, Stiffness Degradation, failure and Transverse Cracking in Composite Laminates.
Ye, J., 2009, Advances in Engineering Mechanics. Qin, Q.-H. & Sun, B. (eds.). Nova Science Publishers, Vol. 1. p. 127-165 39 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Three-dimensional state space spline finite strip analysis of angle-plied laminates
Attallah, K. M. Z., Yu, M. & Ye, J., 11/2014, In: Composites Part B: Engineering. 66, p. 25-35 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Three-dimensional static, dynamic, thermoelastic and buckling analysis of homogeneous and laminated composite cylinders
SOLDATOS, K. P. & Ye, J., 1994, In: Composite Structures. 29, 2, p. 131-143 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Three-dimensional stress analysis of orthotropic and cross-ply laminated hollow cylinders and cylindrical panels
Ye, J. & Soldatos, K. P., 08/1994, In: Computer Methods in Applied Mechanics and Engineering. 117, 3-4, p. 331-351 21 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Three-dimensional vibration of laminated composite plates and cylindrical panels with arbitrarily located lateral surfaces point supports
Ye, J. Q. & Soldatos, K. P., 03/1996, In: International Journal of Mechanical Sciences. 38, 3, p. 271-281 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Three-dimensional vibration of laminated cylinders and cylindrical panels with symmetric or antisymmetric cross-ply lay-up
Ye, J. & Soldatos, K. P., 1994, In: Composites Part B: Engineering. 4, 4, p. 429-444 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Three-dimensional vibrations of cross-ply laminated hollow cylinders with clamped edge boundaries
Ye, J. Q. & Soldatos, K. P., 07/1997, In: Journal of Vibration and Acoustics. 119, 3, p. 317-323 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Three-Dimensional Water Vapor Visualization in Porous Packing by Near-Infrared Diffuse Transmittance Tomography
Tsaoir, M. N. A., Fernandes, D. L. A., Sa, J., Kitagawa, K., Hardacre, C. & Aiouache, F., 4/07/2012, In: Industrial and Engineering Chemistry Research. 51, 26, p. 8875-8882 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Time-Dependant Human Mastication Simulation of Agricultural Products and Its Rapid Prototyping Aided Evaluation: A Case Study for Pecan Kernel Mastication
Celik, H. K., Rennie, A. E. W., Er, K., Abram, T. N. & Akinci, I., 27/04/2017. 10 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Tool Life Performance of Injection Mould Tooling Fabricated by Selective Laser Melting for High-Volume Production
El Kashouty, M., Rennie, A. & Ghazy, M., 26/11/2019, In: Materials. 12, 23, 23 p., 3910.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Torsion of a pultruded GRP WF beam with practical end connections: experimental results and FE analysis.
Turvey, G. J. & Zhang, Y., 2004, Advanced composite Materials in bridges and structures. p. 99
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Torsion tests on pultruded GRP sheet.
Turvey, G. J., 1998, In: Composites Science and Technology. 58, 8, p. 1343-1351 9 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Touching history: 3D replica artifacts
Kaufman, J. & Rennie, A., 12/2014, Ancient Egypt, 15, 3, p. 32-33 2 p.
Research output: Contribution to specialist publication › Article
Published
Toughening mechanisms in composite materials
Qin, Q. (Editor) & Ye, J. (Editor), 06/2015, Elsevier. 416 p. (Woodhead Publishing Series in Composites Science and Engineering)
Research output: Book/Report/Proceedings › Book
Published
Transient distributions of composition and temperature in a gas-solid packed bed reactor by near-infrared tomography
tSaoir, M. N. A., Abreu Fernandes, D. L., McMaster, M., Kitagawa, K., Hardacre, C. & Aiouache, F., 1/05/2012, In: Chemical Engineering Journal. 189-190, p. 383-392 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Two-colour output from InGaAs laser with multiplexed reflective Bragg mirror
Zolotovskaya, S., Smirnov, V. I., Venus, G. B., Glebov, L. B. & Rafailov, E. U., 1/08/2009, In: IEEE Photonics Technology Letters. 21, 15, p. 1093-1095 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Two-Steps Electrochemical Polishing of Laser Powder Bed Fusion 316L Stainless Steel
Zhu, H., Rennie, A., Li, R. & Tian, Y., 31/12/2022, In: Surfaces and Interfaces. 35, 12 p., 102442.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Ultimate loads, strengths, extensions and strains of pultruded GFRP single-lap, single-bolt tension joints
Turvey, G., 2013, Proceedings of the International Conference on Advanced Composites in Construction 2013. p. 357-367 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Ultra-lightweight high ductility cement composite incorporated with low PE fiber and rubber powder
Huang, Z., Liang, T., Huang, B., Zhou, Y. & Ye, J., 20/12/2021, In: Construction and Building Materials. 312, 12 p., 125430.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Ultrashort-pulse lasers passively mode locked by quantum-dot-based saturable absorbers
Lagatsky, A. A., Leburn, C. G., Brown, C. T. A., Sibbett, W., Zolotovskaya, S. & Rafailov, E. U., 01/2010, In: Progress in Quantum Electronics. 34, 1, p. 1-45 45 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Understanding Fluid-Structure Interaction for high amplitude wave loadings on a deep-draft paired column semi-submersible platform: a finite element approach
Odijie, C. & Ye, J., 9/11/2015.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Understanding keyhole induced-porosities in laser powder bed fusion of aluminum and elimination strategy
Guo, L., Wang, H., Liu, H., Huang, Y., Wei, Q., Leung, C. L. A., Wu, Y. & Wang, H., 31/01/2023, In: International Journal of Machine Tools and Manufacture. 184, 103977.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Understanding mixed mode ratio of adhesively bonded joints using genetic programming (GP)
Liu, Y., Gu, Z., Hughes, D. J., Ye, J. & Hou, X., 15/02/2021, In: Composite Structures. 258, 10 p., 113389.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Understanding powder degradation in metal additive manufacturing to allow the upcycling of recycled powders
Powell, D., Rennie, A., Geekie, L. & Burns, N., 20/09/2020, In: Journal of Cleaner Production. 268, 15 p., 122077.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Understanding the fluid-structure interaction from wave diffraction forces on CALM buoys: Numerical and analytical solutions
Amaechi, C. V., Wang, F. & Ye, J., 2/11/2022, In: Ships and Offshore Structures. 17, 11, p. 2545-2573 29 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Underwater Cutting of Metals with Photons
Cheneler, D., Pinkerton, A., Khan, A. & Nyamayaro, C., 3/07/2018.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Uniform and patch loaded steel plates – comparisons between analysis and experiment.
Turvey, G. J. & Osman, M. Y., 2000, Proceedings of the 5th international conference on computational structures technology. Leuven
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Uniform and patch loaded steel plates: comparisons between analysis and experiment.
Turvey, G. J. & Osman, M. Y., 2000, Computational steel structures technology. Ivanyi, M., Muzeau, J. P. & Topping, B. H. V. (eds.). Edinburgh: Civil-Comp Press, p. 49-59 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
University Brand Management through Additive Manufacturing Applications
Doicin, C.-V., Ulmeanu, M.-E., Abram, T. N., Rennie, A. E. W., Cîtu , D., Murzac, R., Tunsoiu, N. & Bărbării, N., 1/06/2018, Proceedings of the 31st IBIMA Conference. Milan, Italy, p. 6716-6727 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
University collaboration improves Mimic condition monitoring
Ma, X. & Briddon, M., 23/09/2015, The Motorship Magazine - insight for marine technology professionals.
Research output: Contribution to specialist publication › Featured article
Published
University Programmes during COVID-19 Pandemic
Rennie, A., Gamage, K. A. A. & Lambert, C., 14/12/2020, Scholarly Community Encyclopdeia: COVID-19. Basel, Switzerland: MDPI AG, 4 p. 4362
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary
Published
Uplift tests on column base connections in pultruded GRP frames.
Turvey, G. J. & Cooper, C., 1998, In: Proceedings of the eighth international conference on composite materials (ECCM-8). p. 285-292 8 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Use of FDM in an undergraduate student project: design, build and test a model wind turbine
Widden, M., Gunn, K. & Rennie, A., 09/2010, 3rd International Conference on Additive Technologies (iCAT 2010); DAAAM Specialized Conference. DAAAM International, 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Using additive manufacturing effectively: a CAD tool to support decision making
Smith, P. & Rennie, A., 07/2010, 36th International MATADOR Conference. Hinduja, S. & Li, L. (eds.). Springer-Verlag, p. 381-384 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Using additive manufacturing to build energy efficient filter supports
Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 10/2013. 9 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Utilising Multi-Material PolyJet Additive Manufacturing for the Design and Fabrication of Prototype Flood Protection Door Seals
Walsh, S. M. R., Rennie, A. E. W., Abram, T. N., Snape, M. & Roberts, L., 27/04/2017. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Variable fused deposition modelling: analysis of benefits, concept design and tool path generation
Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 511-517 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Variable Fused Deposition Modelling – Concept Design and Tool Path Generation
Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 06/2011, Rapid Design, Prototyping and Manufacturing: Proc Twelfth Conference on. p. 113-122 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Vibration frequencies and mode shapes of pultruded GRP circular plates with central circular cut-outs.
Turvey, G. J. & Mulcahy, N., 2004, Proceedings of the 4th international conference on thin-walled structures: thin-walled structures: advances in research, design and manufacturing technology. p. 927-934 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Vibration of laminated composite panels with intermediate point supports and clamped edges
Ye, J., 1997, Proceedings of the 2nd International Symposium on Structures and Foundations in Civil Engineering. Shen, C. K., Kuang, J. S. & Ng, C. W. W. (eds.). Hong Kong: Department of Civil and Structural Engineering, The Hong Kong University of Science and Technology, p. 103-108
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Vibration-based delamination detection in a composite plate
Ullah, I., Sinha, J. & Pinkerton, A., 2013, In: Mechanics of Advanced Materials and Structures. 20, 7, p. 536-551 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Virtual Prototyping
Rennie, A., 07/2005, N/A. 77 p.
Research output: Book/Report/Proceedings › Commissioned report
Published
Virtual Prototyping Phase II
Rennie, A., 05/2006, N/A. 37 p.
Research output: Book/Report/Proceedings › Commissioned report
Unpublished
Virtual Prototyping Phase III
Rennie, A., 01/2007, (Unpublished) N/A. 54 p.
Research output: Book/Report/Proceedings › Commissioned report
Published
Virtual Trading System for Rapid Manufactured Products
Hasan, S. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 127-135 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Viscous Layer Formation in Electrochemical Polishing Laser-Powder Bed Fusion Parts with Different Surface Profiles
Zhu, H., Tian, Y. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 219-228 10 p. (Springer Tracts in Additive Manufacturing).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
Visualization of water vapour flow in a packed bed adsorber by near-infrared diffused transmittance tomography
tSaoir, M. N. A., Abreu Fernandes, D. L., Sa, J., McMaster, M., Kitagawa, K., Hardacre, C. & Aiouache, F., 15/12/2011, In: Chemical Engineering Science. 66, 24, p. 6407-6423 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Wave induced stress profile on a paired column semisubmersible hull formation for column reinforcement
Odijie, C., Quayle, S. D. & Ye, J., 15/07/2017, In: Engineering Structures. 143, p. 77-90 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Wave propagation in anisotropic laminated hollow cylinders of infinite extent
SOLDATOS, K. P. & Ye, J., 12/1994, In: Journal of the Acoustical Society of America. 96, 6, p. 3744-3752 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Wavelets for the analysis and compression of partial discharge data.
Ma, X., Zhou, C. & Kemp, I. J., 7/08/2002, Conference on Electrical Insulation and Dielectric Phenomena, 2001 Annual Report.. IEEE, p. 329-334 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Wear analysis of failed acetabular polyethylene: a comparison of analytical methods
Chuter, G. S. J., Cloke, D. J., Mahomed, A., Partington, P. F. & Green, S. M., 02/2007, In: Journal of Bone and Joint Surgery, British Volume. 89B, 2, p. 273-279 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Wear analysis of failed acetabular polyethylene: A comparison of analytical methods
Green, S., Chuter, G. S. J., Cloke, D. J., Mohamed, A. & Partington, P. F., 2007, Proceedings 8th EFORT Congress, Florence. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Wear evaluation of retrieved, failed uncemented UHMWPE prostheses
Green, S., Mahomed, A., Cloke, D. J., Chuter, G. S. J. & Partington, P. F., 2006, p. T95. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Wear performance of silastic prostheses tested on a novel metatarsophalangeal joint simulator
Green, S., Lee, S., Joyce, T. & Unsworth, A., 2006, p. 35. 1 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Web-flange junctions of pultruded GRP WF profiles: notched flange shear strengths.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of a conference: FRP composites in civil engineering (CICE 2004). p. 859-864 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Wireless surface acoustic wave sensors for displacement and crack monitoring in concrete structures
Perry, M., McKeeman, I., Saafi, M. B. S. & Niewczas, P., 22/02/2016, In: Smart Materials and Structures. 25, 3, 9 p., 035035.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
X-band crab cavities for the CLIC beam delivery system
Burt, G., Ambattu, P., Dexter, A., Abram, T., Dolgashev, V., Tantawi, S. & Jones, R. M., 1/12/2008. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
XPS characterisation of surface modified Ni-Ti shape memory alloy
Green, S. M., Grant, D. M. & Wood, J. V., 31/03/1997, In: Materials Science and Engineering: A. 224, 1–2, p. 21-26 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...6 7 8 9 10 11 Next

Research

Manufacturing

Quick Links

Connect With Us