Manufacturing

View graph of relations

801 - 900 out of 1,001Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Title

Published
Cold sprayed metal-ceramic coatings using satellited powders
Al-Hamdani, K. S., Murray, J. W., Hussain, T., Kennedy, A. & Clare, A. T., 1/07/2017, In: Materials Letters. 198, p. 184-187 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Coincident wire and powder deposition by laser to form compositionally graded material
Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 21/05/2007, In: Surface and Coatings Technology. 201, 16-17, p. 7083-7091 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Coherent control of plasmonic nanoantennas using optical eigenmodes
Kosmeier, S., De Luca, A. C., Zolotovskaya, S., Di Falco, A., Dholakia, K. & Mazilu, M., 2013, In: Scientific Reports. 3, 7 p., 1808.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Coefficients for Theory of Adaptive Elasticity and its use in the FEA of remodeling processes in biological tissues
Magatin, R., Ye, J. & Jin, Z., 2009, 3rd International Conference on Mechanics of Biomaterials and Tissues.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Co-deposition of titanium/polytetrafluoroethylene films by unbalanced magnetron sputtering
Liu, C., Fairhurst, R. G., Ren, L. Q., Green, S. M., Tong, J. & Arnell, R. D., 15/01/2002, In: Surface and Coatings Technology. 149, 2-3, p. 143-150 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Coaxial laser cladding gas flows and their effects
Ibarra-Medina, J., Pinkerton, A. J. & Paul, C. P., 2009, Proceedings of the 23rd International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Closure to “Buckling Analysis of Angle‐Ply Multilaminated Long Hollow Cylinders”
Ye, J. Q., 08/2000, In: Journal of Engineering Mechanics. 126, 8, p. 887-887 1 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Closed-form rigorous solution for the interfacial stress in plated beams using a two-stage method.
Yang, J. & Ye, J., 2005, Bond behaviour of FRP in structures : : proceedings of the International Symposium on Bond Behaviour of FRP in Structures, 7-9 December 2005, Hong Kong, China. Chen, J. F. & Teng, J. G. (eds.). International Institute for FRP in Construction
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Circular plates with one diametral stiffener: an elastic large deflection analysis.
Turvey, G. J. & Salehi, M., 1997, In: Computers and Structures. 63, 4, p. 775-783 9 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Characterization of weld bead geometry in fibre laser butt welding of mild steel sheets by means of statistical modelling
Eghlio, R. M., Pinkerton, A. J. & Li, L., 2012, In: Lasers in Engineering. 22, 5-6, p. 281-298 18 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Characterization Behaviour of Novel Composite Deepwater Risers
Amaechi, C. V. & Ye, J., 20/12/2016.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Characterisation of the TRIUMF neutron facility using a Monte Carlo simulation code
Monk, S., Abram, T. & Joyce, M., 2015, In: Radiation Protection Dosimetry. 164, 3, p. 228-238 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Characterisation of the short term static moment - rotation response of bolted connections between pultruded GRP beam and column WF-sections.
Turvey, G. J. & Cooper, C., 1996, Proceedings of the 2nd international conference on advanced composite materials in bridges and structures (ACMBS II). Montreal: Canadian Society for Civil Engineering, p. 927-934 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the international conference on composites testing and model identification (CompTest 2004). p. 6-7 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests.
Turvey, G. & Zhang, Y., 02/2006, In: Composites Part A: Applied Science and Manufacturing. 37, 2, p. 152-164 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Cement pressurisation in flanged and unflanged acetabular cups
Green, S., Attar, F. G., Bhattacharya, R. & Port, A., 2007, Proceedings 8th EFORT Congress, Florence, Italy. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology, p. P486
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Case study for effects of pile installation on existing offshore facilities in brownfields
Reda, A., Amaechi, C. V. & Shahin, M. A., 30/09/2023, In: Applied Ocean Research. 138, 103651.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Carpet recycling: a review of recycled carpets for structural composites
Sotayo, A., Green, S. & Turvey, G., 04/2015, In: Environmental Technology and Innovation. 3, p. 97-107 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Buckling of CFRP stiffened GRP flanges
Amal Afifi, 22/07/2008. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Buckling behaviour of concrete- filled elliptical steel columns
Lam, D., Dai, X., Jamaluddin, N. & Ye, J., 2011, 7th International Conference on Steel & Aluminium Structures (ICSAS2011), Kuching, Sarawak, Malaysia. Ho, L. H. (ed.).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Buckling analysis of angle-ply multilaminated long hollow cylinders
Ye, J. Q., 08/1999, In: Journal of Engineering Mechanics. 125, 8, p. 964-969 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Bounding properties for eigenvalues of a transcendental dynamic stiffness matrix by using a quadratic matrix pencil
Ye, J. & Williams, F. W., 6/07/1995, In: Journal of Sound and Vibration. 184, 1, p. 173-183 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Bounding Properties For Eigenvalues Of A Transcendental Constrained Matrix By Using A Simple Matrix Pencil
Ye, J. & Williams, F. W., 20/10/1994, In: Journal of Sound and Vibration. 177, 2, p. 282-287 6 p.
Research output: Contribution to Journal/Magazine › Letter › peer-review
Published
Boosting visual servoing performance through RGB-based methods
Fei, H., Wang, Z., Tedeschi, S. & Kennedy, A., 21/08/2023, In: Robotic Intelligence and Automation. 43, 4, p. 468-475 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites
Turvey, G., 2011, Composite joints and connections: principles, modelling and testing. Camanho, P. & Tong, L. (eds.). Cambridge: Woodhead Publishing Limited, p. 77-111 35 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Bolted connections in PFRP structures.
Turvey, G. J., 2000, In: Progress in Structural Engineering and Materials. 2, 2, p. 146-156 11 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Biomechanical testing of the locking compression plate: When does the distance between bone and implant significantly reduce construct stability?
Ahmad, M., Nanda, R., Bajwa, A. S., Candal-Couto, J., Green, S. & Hui, A. C., 03/2007, In: Injury. 38, 3, p. 358-364 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Bending of unequal span continuous pultruded glass fibre reinforced polymer (GFRP) beams
Turvey, G. J., 2015, Advanced Composites in Construction, ACIC 2015 - Proceedings of the 7th Biennial Conference on Advanced Composites In Construction. p. 227-232 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Bending of tip-loaded CFRP stiffened pultruded GRP cantilevers: comparison between theory and experiment
Turvey, G., 2/06/2008. 10 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Benchmark testing and Finite Element (FE) analysis of timber fencing for replacement by novel composite materials
Sotayo, A., Green, S. M. & Turvey, G. J., 11/07/2016, Mechcomp2 2nd International Conference on Mechanics of Composites . Ferreira, A., Neves, A., Viola, E., Tornabene, F. & Fantuzzi, N. (eds.). Bologna: Editrice Esculapio
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Behaviour of Headed Shear Stud in a Push Test using Profiled Steel Sheeting
Qureshi, J., Lam, D. & Ye, J., 2009, Steel Concrete Composite and Hybrid Structures. Lam, D. (ed.). Singapore: Research Publishing Services, p. 737-744 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Barriers to training for employees at SMEs in the construction sector
Ganah, A. & Rennie, A., 07/2009, The First TG 59 International People in Construction Conference. p. 138-146 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Azimuthally and radially polarized light in conical diffraction
Grant, S. D., Zolotovskaya, S., Gillespie, W. A., Kalkandjiev, T. K. & Abdolvand, A., 2014, In: Optics Letters. 39, 7, p. 1988-1991 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Axisymmetrical static and dynamic analysis of laminated hollow cylinders composed of monoclinic elastic layers
SOLDATOS, K. P. & Ye, J., 13/07/1995, In: Journal of Sound and Vibration. 184, 2, p. 245-259 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Axisymmetric vibration of laminated annular plates composed of transversely isotropic layers
Ye, J. Q., 14/08/1997, In: Journal of Sound and Vibration. 205, 2, p. 250-256 7 p.
Research output: Contribution to Journal/Magazine › Letter › peer-review
Published
Axisymmetric vibration analysis of laminated hollow spheres composed of transversely isotropic layers
Ye, J. & Soldatos, K. P., 1996, Proceedings of the 1996 Engineering Systems Design and Analysis Conference. Sabir, A. B. (ed.). American Society of Mechanical Engineers
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Axisymmetric vibration analysis of laminated hollow cylinders with ring stiffeners
Ye, J. Q., 1997, In: Composite Structures. 38, 1-4, p. 151-156 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Axisymmetric nonlinear analysis of shallow spherical shells by a combined boundary element and finite difference method
Ye, J., 1992, In: Engineering Analysis with Boundary Elements. 9, 4, p. 283-287 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Axisymmetric elastic postbuckling of circular plates
Ye, J., 1995, In: International Journal of Pressure Vessels and Piping. 62, 3, p. 213-217 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Axisymmetric Buckling of Homogeneous and Laminated Circular Plates
Ye, J., 08/1995, In: Journal of Structural Engineering. 121, 8, p. 1221-1224 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Axisymmetric buckling analysis of homogeneous and laminated annular plates
Ye, J., 1995, In: International Journal of Pressure Vessels and Piping. 62, 2, p. 153-159 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Axial-Load Resistance of a Novel UHPFRC Grouted SHS Tube-Sleeve Connection: Experimental, Numerical, and Theoretical Approaches
Huang, Z., Zhang, W., Fan, S., Sui, L. & Ye, J., 30/11/2021, In: Journal of Structural Engineering. 147, 11
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Automated wavelet selection and thresholding for PD detection.
Ma, X., Zhou, C. & Kemp, I. J., 04/2002, In: IEEE Electrical Insulation Magazine. 18, 2, p. 37-45 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Automated variation in product design: Using visual basics.net programming language to generate product variation
Smith, P. & Rennie, A., 11/2011, Proceedings of the RAPDASA 2011 Conference. 17 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Automated software for streamlining optimisation of resource planning for an additive manufacturing system
Lupeanu, M., Rosu, M.-M., Doicin, C., Rennie, A. & Neagu, C., 09/2014, Proceedings of 3rd International Conference Advances in Engineering & Management (ADEM 2014). 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Auto-generation methodology of complex-shaped coarse aggregate set of 3D concrete numerical test specimen
Qiu, W., Fu, S. & Ye, J., 30/08/2019, In: Construction and Building Materials. 217, p. 612-625 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Assistive CAD Tools: A Review of Automated Design Methods within Computer Aided Design
Smith, P. & Rennie, A., 06/2009, Rapid Design, Prototyping and Manufacturing: Proceedings of the Tenth National Conference on . Rennie, A., Bocking, C. & Jacobson, D. (eds.). High Wycombe: MJA Print, p. 17-25 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Application of inflatable structures in offshore security
Aboshio, A., Green, S. & Ye, J., 17/12/2013.
Research output: Contribution to conference - Without ISBN/ISSN › Speech
Published
Annular sector plates: comparison of full-section and layer yield predictions.
Turvey, G. J. & Salehi, M., 2003, Proceedings of the 9th international conference on civil and structural engineering computing. p. 89-90 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Analytical solutions of composite plate and shell structures and their engineering applications
Ye, J., 1996, Advances in Applied Mechanics Research in the UK. Beijing: Science Press
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Analytical model of semi-rigid composite joints with steel beams and precast hollowcore slabs.
Lam, D., Ye, J. & Fu, F., 2008, Structures Congress 2007: Proceedings of the 2007 Structures Congress, Proceedings of the Research Frontiers Sessions of the 2007 Structures Congress, and Proceedings of the 2007 Forensic Engineering Track of the 2007 Structures Congress, and May 16-19, 2007, Long Beach, California. Lyons , R., Wallance , J. W. & Stovner, E. (eds.). ASCE
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Analysis the Awkward Posture Ergonomic Risk and Workstation Improvement Simulation in Mechanical Assembly Manufacturing Industry using DelmiaV5
Hambali, R. H., Rahim, S. A. A., Azizan, N., Zali, Z., Akmal, S. & Zin, M. H., 31/12/2019, In: IOP Conference Series: Materials Science and Engineering. 705, 1, 6 p.
Research output: Contribution to Journal/Magazine › Conference article › peer-review
Published
Analysis of unimorph piezoceramic patches on damped square shaped plate
Ali Mokhtar, N., Jafar, F. A., Bani Hashim, A. Y., Hasib, H. & Muhammad, M. N., 2013, In: Applied Mechanics and Materials. 315, p. 965-971 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Analysis of pultruded glass reinforced plastic beams with semi-rigid end connections.
Turvey, G. J., 1997, In: Composite Structures. 38, 1, p. 3-16 14 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Analysis of failure mechanisms of adhesive joints modified by a novel additive manufacturing-assisted method
Kanani, A. Y., Wang, X. E., Hou, X., Rennie, A. E. W. & Ye, J., 15/02/2023, In: Engineering Structures. 277, 9 p., 115428.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Analysis of existing Additive manufacturing material selectors
Hambali, R. H. & Rennie, A., 06/2010. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Unpublished
Analysis and verification of fuel exhaust emissions.
Ma, X., 2/12/2010, (Unpublished) 12 p.
Research output: Working paper
Published
Analysis and suggested modifications for Queen Scallop dredge net
Abram, T., 05/2009, Edinburgh: Seafish Industry Authority. 84 p.
Research output: Book/Report/Proceedings › Commissioned report
Published
Analysis and simulation of the effects of melt pool flow during laser deposition of a multiphase material
Khan, M., Vogel, M., Ibarra-Medina, J., Pinkerton, A. J., N'Dri, N. & Megahed, M., 2012, Proceedings of the 31st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper P133
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An Overview on Bonded Marine Hoses for Sustainable Fluid Transfer and (Un)Loading Operations via Floating Offshore Structures (FOS)
Amaechi, C. V., Chesterton, C., Butler, H. O., Wang, F. & Ye, J., 8/11/2021, In: Journal of Marine Science and Engineering (JMSE). 9, 11
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An iterative, energy-mass balance model for laser metal deposition
Ahsan, M. N., Wang, W. & Pinkerton, A. J., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 149-158 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An Investigation on the Vortex Effect of a CALM Buoy under Water Waves Using Computational Fluid Dynamics (CFD)
Amaechi, C. V. & Ye, J., 4/02/2022, In: Inventions — Open Access Journal. 7, 1, 29 p., 23.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An investigation on the stress transfer in concrete beams bonded with FRP plates
Ye, J. Q. & Yang, J., 2005, Bond Behaviour of FRP in Structures: Proceedings of the International Symposium BBFS 2005. Chen, J. & Teng, J. (eds.). HONG KONG: IIFC SECRETARIAT, p. 183-188 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An investigation of the effect of pulse frequency in laser multiple-layer cladding of stainless steel
Pinkerton, A. J. & Li, L., 2003, In: Applied Surface Science. 208-209, p. 405-410 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An investigation of the digital discrimination of neutrons and γ rays with organic scintillation detectors using an artificial neural network.
Liu, G., Aspinall, M., Ma, X. & Joyce, M. J., 21/08/2009, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 607, 3, p. 620-628 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An Investigation into the Use of Spray Formed Al/Si Metal Matrix Composites for Use as Injection Mould Die Inserts
Bocking, C., Jacobson, D. M. & Rennie, A., 09/2001, Time Compression technologies Conference 2001: Proceedings of. Rapid News Publications PLC, 22 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
An investigation into the use of additive manufacture for the production of metallic bipolar plates for polymer electrolyte fuel cell stacks
Dawson, R., Patel, A., Rennie, A. & White, S., 07/2015, In: Journal of Applied Electrochemistry. 45, 7, p. 637-645 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs)
Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 04/2011, In: International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME). 1, 2, p. 1-18 18 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs)
Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2012, Dynamic methods and process advancements in mechanical, manufacturing, and materials engineering. Davim, J. P. (ed.). Hershey, Penn.: IGI Global, p. 73-90 18 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
An investigation into delamination mechanisms in inclined laser drilling of thermal barrier coated aerospace superalloys
Sezer, H. K., Pinkerton, A. J., Li, L. & Byrd, P., 2005, In: Journal of Laser Applications. 17, 4, p. 225-234 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An interactive PC-based electrical power system simulator for engineering education.
Ma, X., Taylor, C. J. & Joyce, M. J., 2009.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
An integrated model of laser clad formation using CFD and FE methods
Vogel, M., Ibarra-Medina, J., N'Dri, N. & Pinkerton, A. J., 2011, Surface modification technologies XXV : Proceedings of the 25th International Conference on Surface Modification Technologies. Sudarshan, T. S. & Nylen, P. (eds.). India: Valardocs
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An improved closed-form solution to interfacial stresses in plated beams using a two-stage approach
Yang, J. & Ye, J., 01/2010, In: International Journal of Mechanical Sciences. 52, 1, p. 13-30 18 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An FE analysis of the stresses in pultruded GRP single-bolt tension joints and their implications for joint design.
Turvey, G. & Wang, P., 2006, Proceedings of the 6th international conference on computational mechanics (ECCM 2006).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An experimental study on elliptical concrete filled columns under axial compression
Jamaluddin, N., Lam, D., Dai, X. & Ye, J., 08/2013, In: Journal of Constructional Steel Research. 87, p. 6-16 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An experimental investigation of the tensile behaviour of single-lap bolted joints in pultruded GFRP plate
Turvey, G. & Gode, J., 13/09/2012. 15 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
An experimental investigation of the failure of pultruded GFRP single-lap two-bolt connections in tension’
Turvey, G., 2014, Proceedings of the International Conference, FRP Bridges 2014.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An experimental investigation of bolt pull-through in pultruded GRP plate
Turvey, G., 1/09/2009, p. 462-472. 11 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
An experimental evaluation of the stiffening effect of CFRP flange reinforcement and practical end connections on the flexural response of pultruded GRP WF-beams.
Turvey, G. J., 2004, Proceedings of the IMTCR-04 conference on innovative materials and technologies for construction and restoration: volume 1: keynotes, materials, construction. p. 578-588 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An experimental and theoretical investigation of combined gas- and water-atomized powder deposition with a diode laser
Pinkerton, A. J., Syed, W. U. H. & Li, L., 2006, In: Journal of Laser Applications. 18, 1, p. 73-80 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An experimental and numerical study of the influence of diode laser beam shape on thin wall direct metal deposition
Pinkerton, A. J. & Li, L., 2005, In: Journal of Laser Applications. 17, 1, p. 47-56 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An exact solution for the statics and dynamics of laminated thick plates with orthotropic layers
Fan, J. & Ye, J., 1990, In: International Journal of Solids and Structures. 26, 5-6, p. 655-662 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An evaluation of modelling approaches and column removal time on progressive collapse of building
Stephen, D., Lam, D., Forth, J., Ye, J. & Tsavdaridis, K. D., 1/02/2019, In: Journal of Constructional Steel Research. 153, p. 243-253 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An Efficient Triangle Mesh Slicing Algorithm for All Topologies in Additive Manufacturing
King, B., Rennie, A. & Bennett, G. R., 1/01/2021, In: International Journal of Advanced Manufacturing Technology. 112, p. 1023-1033 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An anisotropic enhanced thermal conductivity approach for modelling laser melt pools for Ni-base super alloys
Safdar, S., Pinkerton, A. J., Li, L., Sheikh, M. & Withers, P., 1/02/2013, In: Applied Mathematical Modelling. 37, 3, p. 1187-1195 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An anisotropic enhanced thermal conductivity approach for modelling laser melt pools
Safdar, S., Pinkerton, A. J., Moat, R., Li, L., Sheikh, M. A., Preuss, M. & Withers, P. J., 2007, Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An analytical-numerical model of laser direct metal deposition track and microstructure formation
Ahsan, M. N. & Pinkerton, A. J., 07/2011, In: Modelling and Simulation in Materials Science and Engineering. 19, 5, p. - 22 p., 055003.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An analytical model of the combined powder-wire deposition process
Pinkerton, A. J., Syed, W. U. H. & Li, L., 2006, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An analytical model of energy distribution in laser direct metal deposition
Pinkerton, A. J. & Li, L., 2004, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 218, 4, p. 363-374 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An analytical model of beam attenuation and powder heating during coaxial laser direct metal deposition
Pinkerton, A. J., 2007, In: Journal of Physics D: Applied Physics. 40, 23, p. 7323-7334 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An alternative approach for large deflection analysis of axisymmetric plates on elastic foundation
Ye, J., 08/1994, In: Communications in Numerical Methods in Engineering. 10, 8, p. 623-632 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An Agreement Analysis on the Perception of Property Stakeholders for the Acceptability of Smart Buildings in the Nigerian Built Environment
Alohan, E. O., Oyetunji, A. K., Amaechi, C. V., Dike, E. C. & Chima, P., 26/06/2023, In: Buildings. 13, 7, 1620.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An ABAQUS® plug-in for generating virtual data required for inverse analysis of unidirectional composites using artificial neural networks
Ismail, Y., Wan, L., Chen, J., Ye, J. & Yang, D., 31/10/2022, In: Engineering with Computers. 38, 5, p. 4323-4335 13 p., 5.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Alternative nozzle and metal delivery methods for laser-assisted metal deposition: (invited paper & presentation)
Pinkerton, A. J., 2005.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Aldol-condensation of furfural by activated dolomite catalyst
O’Neill, R., Vanoye, L., De Bellefon, C. & Aiouache, F., 01/2014, In: Applied Catalysis B: Environmental. 144, p. 46-56 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Airflow measurement across negatively infiltration processed porous aluminum structures
Otaru, A. J., Morvan, H. P. & Kennedy, A. R., 1/04/2019, In: AIChE Journal. 65, 4, p. 1355-1364 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
AFM measurement of nanoscale topographical and material wear features
Green, S., Elfick, A. P. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/032
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Advances in the modelling of laser direct metal deposition (invited)
Pinkerton, A., 02/2015, In: Journal of Laser Applications. 27, S1, 7 p., S15001.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Advances and challenges in the modelling of laser melt pool processes: Keynote presentation at the Interfinish SERIA 2013 Asia-Pacific International Conference on Surface Engineering for Research and Industrial Applications
Pinkerton, A., 2013
Research output: Other contribution
Published
Advanced static and dynamic analysis method for helical springs of non-linear geometries
Gu, Z., Hou, X. & Ye, J., 24/11/2021, In: Journal of Sound and Vibration. 513, 18 p., 116414.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...5 6 7 8 9 10 11 Next

Research

Manufacturing

Quick Links

Connect With Us