Home > Research > Manufacturing > Publications & Outputs

Research

View graph of relations

Manufacturing

301 - 400 out of 1,000Page size: 100
RSS feed of this list
  1. 2015
  2. Published

    Bending of unequal span continuous pultruded glass fibre reinforced polymer (GFRP) beams

    Turvey, G. J., 2015, Advanced Composites in Construction, ACIC 2015 - Proceedings of the 7th Biennial Conference on Advanced Composites In Construction. p. 227-232 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  3. Published

    Characterisation of the TRIUMF neutron facility using a Monte Carlo simulation code

    Monk, S., Abram, T. & Joyce, M., 2015, In: Radiation Protection Dosimetry. 164, 3, p. 228-238 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    Development of database for checking fixtures for automotive parts

    Abdullah, Z., Imran, S., Amran, M., Hasib, H., Muhammad, N. S. & Jaafar, R., 2015, In: Applied Mechanics and Materials. 761, p. 37-41 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  5. Published

    Fast estimate of the SAR using spline interpolation approach for parallel transmit B1 mapping in ultra-high field MRI

    Letizia, R., Ye, J., Grover, P. & Shah, S., 2015.

    Research output: Working paper

  6. Published

    Horizon 2020 TWEETHER project for W-band high data rate wireless communications

    Paoloni, C., Letizia, R., Napoli, F., Ni, Q., Rennie, A., Zimmerman, R., Andre, F., Pham, K., Krozer, V., Magne, F., Burciu, I., Ramirez, A., Rocchi, M., Marilier, M. & Vilar, R., 2015, Vacuum Electronics Conference (IVEC), 2015 IEEE International . IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  7. Published

    Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing

    Hasib, H., Rennie, A., Burns, N. & Geekie, L., 2015, In: Filtration. 15, 3, p. 174-180 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artifacts

    Kaufman, J., Rennie, A. E. W. & Clement, M., 2015, In: Procedia CIRP. 36, p. 223-229 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    Structural performance assessment of a woven-fabric reinforced composite as applied in construction of inflatable offshore fender barrier structures

    Aboshio, A., Green, S. & Ye, J., 2015, In: International Journal of Structural Stability and Dynamics. 15, 1, 22 p., 1450036.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  10. 2014
  11. Published

    Monitoring degradation in the field

    Swingler, J., Jones, J., Bryant, M. D., Feinberg, A., Ma, X. & Weaver, P. M., 30/12/2014, The physics of degradation in engineered materials and devices: fundamentals and principles. Swingler, J. (ed.). Momentum Press , p. 117-151 34 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

  12. Published

    Developing novel structural composites from recycled materials

    Sotayo, A., Green, S. & Turvey, G., 16/12/2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  13. Published

    A fast interpolation approach for the calculation of permittivity and conductivity to estimate the SAR

    Priyadarshi, S., Pitman, S., Glover, P., Shah, S., Ye, J., Hu, B. & Letizia, R., 8/12/2014, RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-Bio), 2014 IEEE MTT-S International Microwave Workshop Series on. IEEE, p. 261-266 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  14. Published

    Low secondary electron yield engineered surface for electron cloud mitigation

    Valizadeh, R., Malyshev, O. B., Wang, S., Zolotovskaya, S., Gillespie, W. A. & Abdolvand, A., 8/12/2014, In: Applied Physics Letters. 105, 23, 5 p., 231605.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Unpublished

    Additive manufacturing in assistive product design development

    Sembiring, E., Rennie, A. & Laha, S., 12/2014, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  16. Unpublished

    Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing

    Hasib, H., Rennie, A., Burns, N. & Geekie, L., 12/2014, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  17. Published

    Touching history: 3D replica artifacts

    Kaufman, J. & Rennie, A., 12/2014, Ancient Egypt, 15, 3, p. 32-33 2 p.

    Research output: Contribution to specialist publication › Article

  18. Published

    Evaluation of an in situ spatial resolution instrument for fixed beds through the assessment of the invasiveness of probes and a comparison with a micro-kinetic model

    Touitou, J., Aiouache, F., Burch, R., Roy, D., Hardacre, C., Morgan, K., Sa, J., Stewart, C., Stewart, J. & Goguet, A., 11/2014, In: Journal of Catalysis. 319, p. 239-246 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    Nonlinear system identification for model-based condition monitoring of wind turbines

    Cross, P. & Ma, X., 11/2014, In: Renewable Energy. 71, p. 166-175 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing

    Hasib, H., Rennie, A., Burns, N. & Geekie, L., 11/2014, The Filtration Society 50th Anniversary International Conference and Exhibition: Proceedings of the . The Filtration Society, 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  21. Published

    Three-dimensional state space spline finite strip analysis of angle-plied laminates

    Attallah, K. M. Z., Yu, M. & Ye, J., 11/2014, In: Composites Part B: Engineering. 66, p. 25-35 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    Filtration efficiency gains by fabrication using additive manufacturing

    Burns, N., Vijayakumar, B., Rennie, A. & Geekie, L., 10/2014, Proceedings of the European Conference on Fluid-Particle Separation. 2 p. M3P2

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  23. Published

    Introducing functionality to filter media

    Vijayakumar, B., Rennie, A., Burns, N., Travis, D. & Battersby, P., 10/2014, In: Filtration. 14, 4, p. 217-222 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    Maximising open area whilst retaining strength in novel metal additive manufactured filter media

    Burns, N., Burns, M., Travis, D., Geekie, L., Hasib, H. & Rennie, A., 10/2014. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  25. Published

    The use of additive manufacture for metallic bipolar plates in polymer electrolyte fuel cell stacks

    Dawson, R., Patel, A., Rennie, A. & White, S., 28/09/2014, In: Chemical Engineering Transactions. 41, p. 175-180 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  26. Published

    On the frequency-doubled conically-refracted Gaussian beam

    Grant, S. D., Zolotovskaya, S., Kalkandjiev, T. K., Gillespie, W. A. & Abdolvand, A., 8/09/2014, In: Optics Express. 22, 18, p. 21347-21353 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    Automated software for streamlining optimisation of resource planning for an additive manufacturing system

    Lupeanu, M., Rosu, M.-M., Doicin, C., Rennie, A. & Neagu, C., 09/2014, Proceedings of 3rd International Conference Advances in Engineering & Management (ADEM 2014). 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  28. Published

    Effects of scan direction and orientation on mechanical properties of laser sintered polyamide-12

    Nelson, J. A., Galloway, G., Rennie, A., Abram, T. & Bennett, G. R., 09/2014, In: International Journal of Advanced Design and Manufacturing Technology. 7, 3, p. 19-25 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Innovations in filtration through additive manufacturing: Paper: EP140165

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 09/2014. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  30. Published

    New constitutive model for anisotropic hyperelastic biased woven fibre reinforced composite

    Aboshio, A., Green, S. & Ye, J., 09/2014, In: Plastics, Rubber and Composites. 43, 7, p. 225-234 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    Surface plasmon resonance assisted rapid laser joining of glass

    Zolotovskaya, S. A., Tang, G., Wang, Z. & Abdolvand, A., 25/08/2014, In: Applied Physics Letters. 105, 8, 5 p., 083109.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    A unified method for calculating fire resistance of solid and hollow concrete-filled steel tube columns based on average temperature

    Yu, M., Zha, X., Ye, J. & Wang, B., 15/07/2014, In: Engineering Structures. 71, p. 12-22 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Published

    Improved filtration using additive manufacturing

    Burns, N., Geekie, L., Travis, D., Burns, M., Weston, D. P. & Rennie, A., 07/2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  34. Published

    Experimental investigation of the mechanical properties of neoprene coated nylon woven reinforced composites

    Aboshio, A., Green, S. & Ye, J., 8/06/2014, Proceedings of the first international conference on mechanics of composites, Stony Brook University, New York.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  35. Published

    Design, innovation and a new age for filtration

    Burns, N., Geekie, L., Travis, D., Burns, M. & Rennie, A., 06/2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  36. Published

    Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art

    Kaufman, J., Rennie, A. & Clement, M., 06/2014, Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis (ESDA 2014): Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications. American Society of Mechanical Engineers (ASME), 8 p. ESDA2014-20304

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  37. Published

    Design of a radio frequency heated isothermal micro-trickle bed reactor

    Aiouache, F., 1/05/2014, In: Chemical Engineering Journal. 243, p. 225-233 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Published

    Combined vibration and thermal analysis for the condition monitoring of rotating machinery

    Nembhard, A., Sinha, J., Pinkerton, A. & Elbhbah, K., 05/2014, In: Structural Health Monitoring. 13, 3, p. 281-295 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  39. Published

    Experimental and analytical investigation of two- and six-plate bonded splice joints on serviceability limit deformations of pultruded GFRP beams

    Turvey, G., 05/2014, In: Composite Structures. 111, p. 426-435 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    Controlled modification of optical and structural properties of glass with embedded silver nanoparticles by nanosecond pulsed laser irradiation

    Fleming, L. A. H., Tang, G., Zolotovskaya, S. & Abdolvand, A., 14/04/2014, In: Optical Materials Express. 4, 5, p. 969-975 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  41. Published

    Numerical analysis of slender elliptical concrete filled columns under axial compression

    Dai, X. H., Lam, D., Jamaluddin, N. & Ye, J., 04/2014, In: Thin-Walled Structures. 77, p. 26-35 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  42. Published

    Research strategy on developing additive manufactured bespoke ophthalmic instruments assisted by an online integrated platform

    Lupeanu, M., Rennie, A., Rosu, M.-M. & Moagar-Poladian, G., 04/2014, In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 76, 2, p. 143-162 20 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Unpublished

    Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM

    Lupeanu, M., Rennie, A. & Neagu, C., 31/03/2014, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  44. Published

    Numerical analysis of composite structure with in-plane isotropic negative Poisson’s ratio: effects of materials properties and geometry features of inclusions

    Hou, X., Hu, H. & Silberschmidt, V., 03/2014, In: Composites Part B: Engineering. 58, p. 152–159 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  45. Published

    Parametric study of development of inconel-steel functionally graded materials by laser direct metal deposition

    Shah, K., ul Haq, I., Khan, A., Shah, S. A., Khan, M. & Pinkerton, A., 02/2014, In: Materials and Design. 54, p. 531-538 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  46. Published

    Evaluation of performance and operation viability of non-uniform potential solid oxide fuel cell fueled by reformed methane

    Piroonlerkgul, P., Kiatkittipong, W., Wongsakulphasatch, S., Aiouache, F. & Assabumrungrat, S., 15/01/2014, In: Journal of Power Sources. 246, p. 719–728 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  47. Published

    Aldol-condensation of furfural by activated dolomite catalyst

    O’Neill, R., Vanoye, L., De Bellefon, C. & Aiouache, F., 01/2014, In: Applied Catalysis B: Environmental. 144, p. 46-56 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  48. Published

    Erratum to: A composite material with Poisson’s ratio tunable from positive to negative values: an experimental and numerical study

    Hou, X., Hu, H. & Silberschmidt, V., 01/2014, In: Journal of Materials Science. 49, 1, p. 461 1 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  49. Published

    The business model for the functional rapid manufacturing supply chain

    Hasan, S., Rennie, A. & Hasan, J., 01/2014, In: Studia Commercialia Bratislavensia. 6, 24, p. 536-552 17 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  50. Published

    An experimental investigation of the failure of pultruded GFRP single-lap two-bolt connections in tension’

    Turvey, G., 2014, Proceedings of the International Conference, FRP Bridges 2014.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  51. Published

    Azimuthally and radially polarized light in conical diffraction

    Grant, S. D., Zolotovskaya, S., Gillespie, W. A., Kalkandjiev, T. K. & Abdolvand, A., 2014, In: Optics Letters. 39, 7, p. 1988-1991 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  52. Published

    Condition monitoring of rotating machines using vibration and bearing temperature measurements

    Nembhard, A., Sinha, J., Pinkerton, A. & Elbhbah, K., 2014, Advances in Condition Monitoring of Machinery in Non-stationary Operations: Proceedings of the 3rd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations (CMMN02013). Dalpiaz, G., Rubini, R., D'Elia, G., Cocconcelli, M., Chaari, F., Zimroz, R. & Bartelmus, W. (eds.). Berlin: Springer Verlag, p. 159-169 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  53. Published

    Electromechanical model of human atrial tissue using the discrete element method

    Brocklehurst, P., Zhang, H., Yang, D. & Ye, J., 2014, 11th World Congress on Computational Mechanics (WCCMXI).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  54. Published

    Experimental evaluation of mechanical properties of tin composite (tin, rice husk and silicon carbide) for sustainable production tooling

    Hasib, H., Taufik, R. S., Mohd, N. F. A., Yahaya, S. H., Mohamad, A. K., Abdullah, Z., Ariff, H. & Hambali, R. H., 2014, In: Journal of Advanced Manufacturing Technology. 8, 2

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  55. Published

    Graphene/fly ash geopolymeric composites as self-sensing structural materials

    Saafi, M., Tang, L., Fung, J., Rahman, M., Sillars, F., Liggat, J. & Zhou, X., 2014, In: Smart Materials and Structures. 23, 6, 10 p., 065006.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  56. Published

    Nonredundant Raman imaging using optical eigenmodes

    Kosmeier, S., Zolotovskaya, S. A., De Luca, A. C., Riches, A., Herrington, C. S., Dholakia, K. & Mazilu, M., 2014, In: Optica. 1, 4, p. 257-263 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  57. Published

    Ode to a Grecian replica: on simplifying accurate copies of fragile antiquities

    Glausiusz, J. & Kaufman, J., 2014, 2 p. Washington DC USA : Phi Beta Kappa Society.

    Research output: Other contribution

  58. Published

    Removal Cu(II) and Ni(II) by natural and synthetic hydroxyapatites: a comparative study

    Frnane, F., Boudia, S. & Aiouache, F., 2014, In: Desalination and Water Treatment. 52, 13-15, p. 2856-2862 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  59. Published

    Single- and double-lap bolted joints in pultruded composite plate

    Turvey, G., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  60. Published

    Superstructure Behavior of a Stub-Type Integral Abutment Bridge

    David, T. K., Forth, J. & Ye, J., 2014, In: Journal of Bridge Engineering. 19, 8, 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  61. Published

    Tailoring structure of inclusion with strain-induced closure to reduce Poisson's ratio of composite materials

    Hou, X., Hu, H. & Silberschmidt, V., 2014, In: Journal of Applied Physics. 115, 8 p., 224903.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  62. 2013
  63. Published

    Application of inflatable structures in offshore security

    Aboshio, A., Green, S. & Ye, J., 17/12/2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Speech

  64. Published

    Generic model of a community-based microgrid integrating wind turbines, photovoltaics and CHP generations

    Ma, X., Wang, Y. & Qin, J., 12/2013, In: Applied Energy. 112, p. 1475–1482 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  65. Unpublished

    How to keep it in for longer: innovation in the Critical Care Unit

    Laha, S. & Rennie, A., 6/11/2013, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Other

  66. Published

    Introducing functionality to filter media

    Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 6/11/2013. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  67. Published

    Novel filter designs that deliver filtration benefits produced by metal additive manufacturing

    Burns, N., Burns, M., Travis, D., Geekie, L., Rennie, A. & Weston, D. P., 10/2013, Proceedings of AFS 2013 Fall Conference: Innovation in Filter Media and Membranes. 13 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  68. Published

    Product re-design using advanced engineering applications and function analysis: a case study for greenhouse clips

    Celik, K., Lupeanu, M., Rennie, A., Neagu, C. & Akinci, I., 10/2013, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 35, 3, p. 305-318 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  69. Published

    Using additive manufacturing to build energy efficient filter supports

    Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 10/2013. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  70. Published

    Numerical validation and dynamic study of inflatable offshore barrier structures under impact loading

    Aboshio, A., Ye, J. & Green, S., 17/09/2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  71. Published

    Path lumping kinetic model for aqueous phase reforming of sorbitol

    Aiouache, F., McAleer, L., Gan, Q., Al-Muhtaseb, A. & Ahmad, M., 10/09/2013, In: Applied Catalysis A: General. 466, p. 240–255 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  72. Published

    Development of an Engineering Design Academy: Increasing the commercial exposure of undergraduate students

    Lambert, C. & Rennie, A., 09/2013, Proceedings of The 30th International Manufacturing Conference: Professional Development of Engineers for Advanced Manufacturing. Dublin, Ireland, p. 473-482 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  73. Published

    Dynamic Response of Inflatable Offshore Fender Barrier Structures under Impact Loading

    Aboshio, A., Green, S. & Ye, J., 09/2013, Proceedings of the 14th International Conference on Civil, Structural and Environmental Engineering Computing, CC 2013. Topping, B. H. V. & Iványi, P. (eds.). Stirlingshire: Civil-Comp Press, 20 p. 148. (Civil-Comp Proceedings; vol. 102).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  74. Published

    Predicting limit draft force for a chisel tine using FEA based simulation

    Celik, K., Rennie, A. & Akinci, I., 09/2013, 5th International Conference Trends in Agricultural Engineering (TAE 2013). p. 112-117 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  75. Published

    Improved control of individual blade pitch for wind turbines

    Zhang, D., Cross, P., Ma, X. & Li, W., 15/08/2013, In: Sensors and Actuators A: Physical. 198, p. 8-14 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  76. Published

    How additive manufacturing helps in reducing power consumption in pumps

    Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 9/08/2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  77. Published

    An experimental study on elliptical concrete filled columns under axial compression

    Jamaluddin, N., Lam, D., Dai, X. & Ye, J., 08/2013, In: Journal of Constructional Steel Research. 87, p. 6-16 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  78. Published

    Reactive distillation for synthesis of glycerol carbonate via glycerolysis of urea

    Lertlukkanasuk, N., Kiatkittipong , W., Arpornwichanop, A., Aiouache, F. & Assabumrungrat, S., 08/2013, In: Chemical Engineering and Processing: Process Intensification. 70, p. 103–109 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  79. Published

    Prediction of thermal cracking in concrete structures reinforced with GFRP

    EL-Zaroug, O., Forth, J. & Ye, J., 06/2013, FRPRCS-11: 11th International Symposiumn on Fibre Reinforced Polymer for Reinforced Concrete Structures . Barros, J. (ed.). Elsevier

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  80. Published

    The role of technical functional analysis in innovative design of bespoke rapid manufactured parts: medical industry applications

    Lupeanu, M., Rosu, M.-M., Rennie, A., Neagu, C. & Brooks, H., 06/2013, Advances in Production, Automation and Transportation Systems: Proceedings of the 6th WSEAS International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS13) and 4th International Conference on Automotive and Transportation Systems (ICAT13). Brasov, Romania: WSEAS Press, Vol. 13. p. 227-232 6 p. (Mathematics and Computers in Science and Engineering Series; vol. 13).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  81. Published

    A new design concept for milling tools of spherical surfaces obtained by kinematic generation

    Neagu, C., Lupeanu, M. & Rennie, A., 1/05/2013, In: Applied Mathematical Modelling. 37, 9, p. 6119-6134 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  82. Published

    A unified formulation for circle and polygon concrete-filled steel tube columns under axial compression

    Yu, M., Zha, X., Ye, J. & Li, Y., 04/2013, In: Engineering Structures. 49, p. 1-10 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  83. Published

    Direct laser deposition with different types of 316L steel particle: a comparative study of final part properties

    Mahmood, K. & Pinkerton, A., 04/2013, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 227, 4, p. 520-531 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  84. Published

    Dynamic study and optimal design of offshore inflatable barriers subject to impact loading

    Aboshio, A. & Ye, J., 14/03/2013, Proceedings of the 15th Young Researchers' Conference, Institution of Structural Engineers, London, UK. London: Institution of Structural Engineers, p. 10-11 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  85. Published

    Discrete element modeling of metal skinned sandwich composite panels subject to uniform load

    Zha, X., Wan, C., Fan, Y. & Ye, J., 1/03/2013, In: Computational Materials Science. 69, p. 73-80 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  86. Published

    Prediction of failure envelopes and stress strain curves of fiber composite laminates under triaxial loads: comparison with experimental results

    Zhang, D., Xu, L. & Ye, J., 03/2013, In: Journal of Composite Materials. 47, 6-7, p. 763-776 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  87. Published

    A novel condition monitoring and real-time simulation system for wind turbines

    Ma, X. & Cross, P., 4/02/2013, Proceedings of EWEA 2013 - European Wind Energy Conference & Exhibition. Vienna: EWEA, 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  88. Published

    An anisotropic enhanced thermal conductivity approach for modelling laser melt pools for Ni-base super alloys

    Safdar, S., Pinkerton, A. J., Li, L., Sheikh, M. & Withers, P., 1/02/2013, In: Applied Mathematical Modelling. 37, 3, p. 1187-1195 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  89. Published

    Microscopic modelling of the hydraulic fracturing process

    Eshiet, K., Sheng, Y. & Ye, J., 02/2013, In: Environmental Earth Sciences. 68, 4, p. 1169-1186 18 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  90. Published

    A coupled approach to weld pool, phase and residual stress modelling of laser direct metal deposition (LDMD) processes

    Vogel, M., Khan, M., Ibarra-Medina, J., Pinkerton, A., N'Dri, N. & Megahed, M., 2013, 2nd World Congress on Integrated Computational Materials Engineering. Li, M., Campbell, C., Thornton, K., Holm, E. & Gumbsch, P. (eds.). Wiley, p. 231-236 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  91. Published

    Advances and challenges in the modelling of laser melt pool processes: Keynote presentation at the Interfinish SERIA 2013 Asia-Pacific International Conference on Surface Engineering for Research and Industrial Applications

    Pinkerton, A., 2013

    Research output: Other contribution

  92. Published

    Analysis of unimorph piezoceramic patches on damped square shaped plate

    Ali Mokhtar, N., Jafar, F. A., Bani Hashim, A. Y., Hasib, H. & Muhammad, M. N., 2013, In: Applied Mechanics and Materials. 315, p. 965-971 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  93. Published

    Coherent control of plasmonic nanoantennas using optical eigenmodes

    Kosmeier, S., De Luca, A. C., Zolotovskaya, S., Di Falco, A., Dholakia, K. & Mazilu, M., 2013, In: Scientific Reports. 3, 7 p., 1808.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  94. Published

    Design and fabrication of cranioplasty prostheses: fit evaluation between phantom-based haptic environment and Materialise 3-Matic Software

    Hasib, H., Yahaya, S. H., Mohamad, A. K., Bani Hashim, A. Y., Ali Mokhtar, N. & Simha, S. S., 2013, In: Journal of Advanced Manufacturing Technology. 7, 1, p. 87-96 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  95. Published

    Design of a reconfigurable platform for navigation signal simulation

    Ming, D., Zhong, X., Liu, L. & Ma, X., 2013, In: Journal of Networks. 8, 5, p. 1019-1026 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  96. Published

    Design of a reconfigurable platform for navigation signal simulation

    Ming, D., Zhong, X., Ma, X. & Liu, L., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  97. Published

    Enhancing condition monitoring of distributed generation systems through optimal sensor selection

    Wang, Y., Ma, X. & Joyce, M., 2013, Industrial Electronics Society, IECON 2013 - 39th Annual Conference of the IEEE. Piscataway, N.J.: IEEE, p. 7610-7616 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  98. Published

    Experimental and analytical study on factors influencing biomimetic undulating fin propulsion performance based on orthogonal experimental design

    Wang, G., Ma, X., Hua, T. & Zhang, D., 2013, In: Advanced Robotics. 27, 8, p. 597-609 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  99. Published

    Feature selection for artificial neural network model-based condition monitoring of wind turbines

    Cross, P. & Ma, X., 2013, Proceedings of the 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies (CM 2013 & MFPT 2013). BINDT, 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  100. Published

    Flexural performance of concrete slabs reinforced with GFRP rebars

    Elzaroug, O., Forth, J., Ye, J. & Beeby, A., 2013, In: Civil and Environmental Research. 5, p. 6-11 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  101. Published

    Infrared laser pulse triggers increased singlet oxygen production in tumour cells

    Sokolovski, S. G., Zolotovskaya, S., Goltsov, A., Pourreyron, C., South, A. P. & Rafailov, E. U., 2013, In: Scientific Reports. 3, 7 p., 3484.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  102. Published

    Model-based condition monitoring for wind turbines

    Cross, P. & Ma, X., 2013, Automation and Computing (ICAC), 2013 19th International Conference on. IEEE, 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  103. Published

    Pneumatic fluid structure interaction of inflatable offshore fender barriers made of anisotropic hyperelastic composites

    Aboshio, A., Ye, J. & Green, S., 2013, Proceedings of the 17th International Conference on Composite Structures, Porto, Portugal, 17-21 June 2013.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 1 2 3 4 5 6 7 8 ...10 Next

Back to top