Manufacturing

View graph of relations

701 - 800 out of 1,001Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Publication date

2006
Published
A three-dimensional inverse finite-element method applied to experimental eddy-current imaging data.
Soleimani, M., Lionheart, W. R. B., Peyton, A. J., Ma, X. & Higson, S. R., 05/2006, In: IEEE Transactions on Magnetics. 42, 5, p. 1560 -1567
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Virtual Prototyping Phase II
Rennie, A., 05/2006, N/A. 37 p.
Research output: Book/Report/Proceedings › Commissioned report
Published
Combining wire and coaxial powder feeding in laser direct metal deposition for rapid prototyping
Syed, W. U. H., Pinkerton, A. J. & Li, L., 30/04/2006, In: Applied Surface Science. 252, 13, p. 4803-4808 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Structural analysis of CFRP-plated pultruded GRP beams.
Turvey, G., 1/04/2006, In: Proceedings of the ICE - Structures and Buildings. 159, SB2, p. 65-75 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Spatial near-infrared imaging of hydroxyl band coverage on ceria-based catalysts
Aiouache, F., Oyama, H. & Kitagawa, K., 04/2006, In: AIChE Journal. 52, 4, p. 1516-1521 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Eddy current measurement of the electrical conductivity and porosity of metal foams.
Ma, X. & Peyton, A. J., 03/2006, In: IEEE Transactions on Instrumentation and Measurement. 55, 2, p. 570-576 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests.
Turvey, G. & Zhang, Y., 02/2006, In: Composites Part A: Applied Science and Manufacturing. 37, 2, p. 152-164 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Deformation of materials
Green, S. M., 02/2006, In: Current Orthopaedics. 20, 1, p. 9-15 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Simultaneous wire- and powder-feed direct metal deposition: An investigation of the process characteristics and comparison with single-feed methods
Syed, W. U. H., Pinkerton, A. J. & Li, L., 02/2006, In: Journal of Laser Applications. 18, 1, p. 65-72 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Hardware and software design for an electromagnetic induction tomography (EMT) system for high contrast metal process applications.
Ma, X., Peyton, A. J., Higson, S. R., Lyons, A. & Dickinson, S. J., 01/2006, In: Measurement Science and Technology. 17, 1, p. 111-118 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Accuracy of design sensitivity for optimization of structural using small strain theory by finite element method
Bhagate, K. A., Pawar, P., Singh , A. K. & Ye, J., 2006, III European Conference on Computational Mechanics : Solids, Structures and Coupled Problems in Engineering: Book of Abstracts. Motasoares, C. A., Martins, J. A. C., Rodrigues, H. C., Ambrósio, J. A. C., Pina, C. A. B., Motasoares , C. M., Pereira, E. B. R. & Folgado, J. (eds.). Berlin: Springer, p. 711-711 1 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An analytical model of the combined powder-wire deposition process
Pinkerton, A. J., Syed, W. U. H. & Li, L., 2006, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An experimental and theoretical investigation of combined gas- and water-atomized powder deposition with a diode laser
Pinkerton, A. J., Syed, W. U. H. & Li, L., 2006, In: Journal of Laser Applications. 18, 1, p. 73-80 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An FE analysis of the stresses in pultruded GRP single-bolt tension joints and their implications for joint design.
Turvey, G. & Wang, P., 2006, Proceedings of the 6th international conference on computational mechanics (ECCM 2006).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Design and development of a novel multistation MTP joint simulator for in vitro testing
Green, S., Lee, S., Joyce, T. & Unsworth, A., 2006, p. P137.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Diode laser metal deposition: The effect of pulsed beam parameters on superalloy microstructure and deposit morphology
Pinkerton, A. J., Moat, R. J., Li, L., Preuss, M. & Withers, P., 2006, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Failure of pultruded GRP WF-section webs in compression - an experimental investigation.
Turvey, G., 2006, Proceedings of the 12th European conference on composite materials (ECCM-12).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Finite element modelung of semi-rigid composite joints with precast hollow core slabs
Lam, D., Ye, J. Q. & Fu, F., 2006, 8th International Conference on Steel-Concrete Composite and Hybrid Structures, Proceedings. Harbin, China: HARBIN INSTITUTE TECHNOLOGY PUBLISHERS, p. 426-433 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Flexural performance of concrete slabs reinforced with GFRP and subjected to different thermal histories.
El-zaroug, O., Forth, J., Ye, J. & Beeby, A., 2006, 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures. Patras, Greece: University of Patras
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Rapid additive manufacturing of functionally graded structures using simultaneous wire and powder laser deposition
Li, L., Syed, W. U. H. & Pinkerton, A. J., 2006, In: Virtual and Physical Prototyping. 1, 4, p. 217-225 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid design, prototyping and manufacture: proceedings of the seventh national conference on
Bocking, C. E. (Editor), Rennie, A. E. W. (Editor) & Jacobson, D. M. J. (Editor), 2006, MJA Print. 134 p.
Research output: Book/Report/Proceedings › Book
Published
Single-bolt tension joints in pultruded GRP plate - effects of elevated temperature on failure loads, failure modes, load orientation and joint efficiency.
Turvey, G. & Wang, P., 2006, Proceedings of the 2nd international conference on joining plastics 2006..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Strengthening ductile metallic structures using externall bonded fibre reinforced composite materials
Anapolitanos, I., Lam, D. & Ye, J., 2006, Steel and Aluminium Structures, ICSAS'07: Proceedings of the Sixth International Conference on Steel and Aluminium Structures . Beale, R. G. (ed.). Oxford: Oxford Brookes University
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The effect of powder recycling in direct metal laser deposition on powder and manufactured part characteristics
Carroll, P. A., Pinkerton, A. J., Allen, J., Syed, W. U. H., Sezer, H. K., Brown, P., Ng, G., Scudamore, R. & Li, L., 2006, Proceedings of AVT-139 Specialists Meeting on Cost Effective Manufacture via Net Shape Processing. NATO Research and Technology Organisation
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Wear evaluation of retrieved, failed uncemented UHMWPE prostheses
Green, S., Mahomed, A., Cloke, D. J., Chuter, G. S. J. & Partington, P. F., 2006, p. T95. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Wear performance of silastic prostheses tested on a novel metatarsophalangeal joint simulator
Green, S., Lee, S., Joyce, T. & Unsworth, A., 2006, p. 35. 1 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
2005
Published
Thermo electroelastic solutions for surface bone remodeling under axial and transverse loads
Qin, Q. H., Qu, C. Y. & Ye, J. Q., 11/2005, In: Biomaterials. 26, 33, p. 6798-6810 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A 3D inverse finite element technique applied to experimental magnetic induction tomography data.
Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X., 09/2005. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Development of a fast electromagnetic induction tomography system for metal process applications.
Ma, X., Higson, S. R., Lyons, A. & Peyton, A. J., 09/2005. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Mechanical and electrochemical properties of multiple-layer diode laser cladding of 316L stainless steel
Majumdar, J. D., Pinkerton, A. J., Liu, Z., Manna, I. & Li, L., 15/07/2005, In: Applied Surface Science. 247, 1-4, p. 373-377 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel
Majumdar, J. D., Pinkerton, A. J., Liu, Z., Manna, I. & Li, L., 15/07/2005, In: Applied Surface Science. 247, 1-4, p. 320-327 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multiple-layer laser deposition of steel components using gas- and water-atomised powders: the differences and the mechanisms leading to them
Pinkerton, A. J. & Li, L., 15/07/2005, In: Applied Surface Science. 247, 1-4, p. 175-181 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Measurement of the electrical conductivity of open-celled aluminium foam using non-contact eddy current techniques.
Ma, X., Peyton, A. J. & Zhao, Y. Y., 07/2005, In: NDT and E International. 38, 5, p. 359 -367
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Virtual Prototyping
Rennie, A., 07/2005, N/A. 77 p.
Research output: Book/Report/Proceedings › Commissioned report
Published
From Concept to Manufacture: Effective use of CAD and FEA Without Compromising Design Intent
Taylor, S. M., Rennie, A. E. W., Quayle, S. & Rawcliffe, N., 10/06/2005, Rapid Design, Prototyping and Manufacture: Proc. Sixth National Conference on . Rennnie, A., Jacobson, D. & Bocking, C. (eds.). X-CD Technologies Inc, p. 101-107 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Magnetic induction tomography : image reconstruction on experimental data from various applications.
Soleimani, M., Ktistis, C., Ma, X., Yin, W., Lionheart, W. R. B. & Peyton, A. J., 06/2005. 4 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Electromagnetic techniques for imaging the cross-section distribution of molten steel flow in the continuous casting nozzle.
Ma, X., Peyton, A. J., Binns, R. & Higson, S. R., 04/2005, In: IEEE Sensors Journal. 5, 2, p. 224-232 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
State space solution for axisymmetric bending of angle-ply laminated cylinder with clamped edges
Sheng, H. Y. & Ye, J. Q., 04/2005, In: Composite Structures. 68, 1, p. 119-128 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Diode-pumped Yb,Er:glass laser passively Q switched with a V3+:YAG crystal
Zolotovskaya, S., Yumashev, K. V., Kuleshov, N. V. & Sandulenko, A. V., 21/03/2005, In: Applied Optics. 44, 9, p. 1704-1708 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tearing failure of web-flange junctions in pultruded GRP profiles.
Turvey, G. J. & Zhang, Y., 1/02/2005, In: Composites Part A: Applied Science and Manufacturing. 36, 2, p. 309-317 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Dynamic creep and mechanical characteristics of SmartSet GHV bone cement
Liu, C., Green, S., Watkins, N., Baker, D. & McCaskie, A., 01/2005, In: Journal of Materials Science: Materials in Medicine. 16, 2, p. 153-160 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping
Syed, W. U. H., Pinkerton, A. J. & Li, L., 2005, In: Applied Surface Science. 247, 1-4, p. 268-276 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Alternative nozzle and metal delivery methods for laser-assisted metal deposition: (invited paper & presentation)
Pinkerton, A. J., 2005.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
An experimental and numerical study of the influence of diode laser beam shape on thin wall direct metal deposition
Pinkerton, A. J. & Li, L., 2005, In: Journal of Laser Applications. 17, 1, p. 47-56 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An investigation into delamination mechanisms in inclined laser drilling of thermal barrier coated aerospace superalloys
Sezer, H. K., Pinkerton, A. J., Li, L. & Byrd, P., 2005, In: Journal of Laser Applications. 17, 4, p. 225-234 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An investigation on the stress transfer in concrete beams bonded with FRP plates
Ye, J. Q. & Yang, J., 2005, Bond Behaviour of FRP in Structures: Proceedings of the International Symposium BBFS 2005. Chen, J. & Teng, J. (eds.). HONG KONG: IIFC SECRETARIAT, p. 183-188 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Closed-form rigorous solution for the interfacial stress in plated beams using a two-stage method.
Yang, J. & Ye, J., 2005, Bond behaviour of FRP in structures : : proceedings of the International Symposium on Bond Behaviour of FRP in Structures, 7-9 December 2005, Hong Kong, China. Chen, J. F. & Teng, J. G. (eds.). International Institute for FRP in Construction
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Direct additive laser manufacturing using gas- and water-atomised H13 tool steel powders
Pinkerton, A. J. & Li, L., 2005, In: International Journal of Advanced Manufacturing Technology. 25, 5-6, p. 471-479 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Explaining microstructural and physical variations in rapid additive manufactured waspaloy parts through the laser-deposition thermal cycle
Pinkerton, A. J., Syed, W. U. H., Karadge, M. & Li, L., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 822-831 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Non-linear Simulation of the Behavior of Integral Concrete-Filled Steel Tubular Framed Structures in Fire Conditions
Liu, S., Li, Y., Zha, X. & Ye, J., 2005, Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing. Topping, B. H. V. (ed.). Stirling: Civil-Comp Press, p. 99-100 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Rapid design, prototyping and manufacture: Proceedings of the Sixth National Conference on
Rennie, A. (Editor), Jacobson, D. M. (Editor) & Bocking, C. E. (Editor), 2005, X-CD Technologies Inc. 129 p.
Research output: Book/Report/Proceedings › Book
Published
Single-step graded surface coating using combined wire and powder feeding laser cladding
Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 787-795 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
SME expectations and experiences
Seward, D., Quayle, S., Rennie, A. & Taylor, S., 2005. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Speech
Published
Statistical analysis of the effect of processing conditions on powder catchment efficiency in the Direct Laser Deposition (DLD) process
Syed, W. U. H., Pinkerton, A. J., Li, L., Al-Eid, E. & Pan, J., 2005, Virtual modeling and rapid manufacturing: advanced research in virtual and rapid prototyping. Bartolo, P. J., Mateus, A. J., Batista, F. C., Almeida, H. A., Vasco, J. C., Correia, M. A., Alves, N. F., Andre, N. C., Novo, P. P., Lima, P., Custodio, P. C., Martinho, P. G. & Carvolho, R. A. (eds.). London: Taylor and Francis, p. 361-367 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The effect of process parameters on residual stresses within an inconel 718 part produced by the Direct Laser Deposition process
Pinkerton, A. J., Shackleton, J., Moat, R., Li, L., Withers, P., Preuss, M., Allen, J., Hilton, P. & Folwell, R., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 601-610 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
2004
Published
Influence of bovine serum lubricant changeover time on the wear of PTFE biomaterial against stainless steel
Joyce, T. J., Mendham, K., Green, S. M. & Unsworth, A., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Polymeric biomaterial wear test rig validated to ASTM F732-00 and against clinical data
Joyce, T. J., Monk, D., Thompson, P., Chiu, P., Unsworth, A. & Green, S. M., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The agglomeration of polyethylene particles in the cell culture environment
Elfick, A. P. D., Green, S. M., McCaskie, A. & Birch, M., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The design & development of a simulator for in vitro testing of metatarsophalangeal prostheses
Joyce, T. J., Green, S. M. & Unsworth, A., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Opsonization of polyethylene wear particles regulates macrophage and osteoblast responses in vitro
Elfick, A. P. D., Green, S. M., McCaskie, A. W. & Birch, M. A., 15/11/2004, In: Journal of Biomedical Materials Research Part B: Applied Biomaterials. 71B, 2, p. 244-251 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Eddy current measurement of the electrical conductivity and porosity of metal foams.
Ma, X. & Peyton, A. J., 8/11/2004, Proceedings of the IEEE Instrumentation and Measurement Technology Conference, 2004. IMTC 04.. IEEE, Vol. 1. p. 127-132 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Novel computer-based processing system for partial discharge detection and diagnosis.
Ma, X., Zhou, C. & Kemp, I. J., 8/11/2004, Proceedings of the IEEE Instrumentation and Measurement Technology Conference, 2004. IMTC 04.. IEEE, Vol. 1. p. 684-688 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Pre-heating of components in cemented total hip arthroplasty
Jafri, A. A., Green, S. M., Partington, P. F., McCaskie, A. W. & Muller, S. D., 11/2004, In: Journal of Bone and Joint Surgery, British Volume. 86B, 8, p. 1214-1219 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Free-edge effect in cross-ply laminated plates under a uniform extension
Sheng, H. Y. & Ye, J. Q., 09/2004, In: Structural Engineering and Mechanics. 18, 3, p. 377-388 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances
Pinkerton, A. J. & Li, L., 21/07/2004, In: Journal of Physics D: Applied Physics. 37, 14, p. 1885-1895 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Nonlinear properties of phototropic media on the basis of CuxSe nanoparticles in quartz glass
Zolotovskaya, S., Posnov, N. N., Prokosin, P. V., Yumashev, K. V., Gurin, V. S. & Alexeenko, A. A., 07/2004, In: Semiconductors. 38, 7, p. 812-817 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A state space finite element for laminated composites with free edges and subjected to transverse and in-plane loads
Ye, J., Sheng, H. & Qin, Q., 06/2004, In: Computers and Structures. 82, 15-16, p. 1131-1141 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The development of temperature fields and powder flow during laser direct metal deposition wall growth
Pinkerton, A. J. & Li, L., 05/2004, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 218, 5, p. 531-541 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The significance of deposition point standoff variations in multiple-layer coaxial laser cladding (coaxial cladding standoff effects)
Pinkerton, A. J. & Li, L., 05/2004, In: International Journal of Machine Tools and Manufacture. 44, 6, p. 573-584 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Thermoelectroelastic solutions for internal bone remodeling under axial and transverse loads
Qin, Q. H. & Ye, J. Q., 05/2004, In: International Journal of Solids and Structures. 41, 9-10, p. 2447-2460 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multiple-layer cladding of stainless steel using a high-powered diode laser: an experimental investigation of the process characteristics and material properties
Pinkerton, A. J. & Li, L., 1/04/2004, In: Thin Solid Films. 453-454, 2, p. 471-476 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The behaviour of water- and gas-atomised tool steel powders in coaxial laser freeform fabrication
Pinkerton, A. J. & Li, L., 1/04/2004, In: Thin Solid Films. 453-454, 2, p. 600-605 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
THE WEAR OF ALUMINA-ON-ALUMINA TOTAL HIP PROSTHESES
Scholes, S. C., Green, S. M. & Unsworth, A., 1/04/2004, In: Journal of Bone and Joint Surgery, British Volume. 86-B, SUPP IV, p. 403 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
Modelling powder concentration distribution from a coaxial deposition nozzle for laser-based rapid tooling
Pinkerton, A. J. & Li, L., 02/2004, In: Journal of Manufacturing Science and Engineering. 126, 1, p. 33-41 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An analytical model of energy distribution in laser direct metal deposition
Pinkerton, A. J. & Li, L., 2004, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 218, 4, p. 363-374 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An experimental evaluation of the stiffening effect of CFRP flange reinforcement and practical end connections on the flexural response of pultruded GRP WF-beams.
Turvey, G. J., 2004, Proceedings of the IMTCR-04 conference on innovative materials and technologies for construction and restoration: volume 1: keynotes, materials, construction. p. 578-588 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the international conference on composites testing and model identification (CompTest 2004). p. 6-7 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Combined wire and powder feeding laser direct metal deposition for rapid prototyping
Syed, W. U. H., Pinkerton, A. J. & Li, L., 2004, Proceedings of the 23rd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Diode laser deposition of microstructurally graded components using gas- and water-atomised powder blends
Pinkerton, A. J., Syed, W. U. H. & Li, L., 2004, Proceedings of the 23rd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Finite element analysis of buckling and initial failure loads of short pultruded GRP columns.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the 7th international conference on computational structures technology. p. 57-58 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Local buckling of axially compressed, pultruded GRP WF-section short columns – comparison of experimental response with FE analysis predictions.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the BSSM (British society for strain measurement) international conference on advances in experimental mechanics: advances in experimental mechanics. p. 87-92 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Maximising the buckling loads of symmetrically laminated composite rectangular plates using a layerwise optimisation (LO) approach.
Narita, Y. & Turvey, G. J., 2004, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 218, 7, p. 681-691 11 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Molten metal flow visualisation using mutual induction tomography (MIT).
Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X., 2004, 2004 Proceedings of the ASME 7th Biennial Conference on Engineering Systems Design & Analysis. Vol. 1. 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Rapid design, prototyping and manufacture: Proceedings of the Fifth National Conference on
Jacobson, D. M. (Editor), Rennie, A. (Editor) & Bocking, C. E. (Editor), 2004, Professional Engineering Publishing. 111 p.
Research output: Book/Report/Proceedings › Book
Published
Recent research advances at Lancaster University on double-lap bolted tension joints in pultruded GRP plate material.
Turvey, G. J. & Wang, P., 2004, Proceedings of the 7th world pultrusion conference. 7 ed. p. 1-16 16 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Review of tests on bolted joints between pultruded GRP profiles.
Turvey, G. J. & Cooper, C., 2004, In: Proceedings of the Institute of Civil Engineers Civil Engineering. 157, 3, p. 211-233 23 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Shear failure strength of web-flange junctions in pultruded GRP profiles.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the ASIC 2004 conference: advanced polymer composites (ASIC 2004). p. 553-560 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Stress transfer in cross-ply laminates with transverse cracks
Ye, J. & Yang, J., 2004, Computational Mechanics: Proceedings of the Sixth World Congress on Computational Mechanics in conjunction with the Second Asian-Pacific Congress on Computational Mechanics, September 5-10, 2004, Beijing, China . Yao, Z. H., Yuan, M. W. & Zhong, W. X. (eds.). Beijing: Tsinghua University Press & Springer-Verlag
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Torsion of a pultruded GRP WF beam with practical end connections: experimental results and FE analysis.
Turvey, G. J. & Zhang, Y., 2004, Advanced composite Materials in bridges and structures. p. 99
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Vibration frequencies and mode shapes of pultruded GRP circular plates with central circular cut-outs.
Turvey, G. J. & Mulcahy, N., 2004, Proceedings of the 4th international conference on thin-walled structures: thin-walled structures: advances in research, design and manufacturing technology. p. 927-934 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Web-flange junctions of pultruded GRP WF profiles: notched flange shear strengths.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of a conference: FRP composites in civil engineering (CICE 2004). p. 859-864 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
2003
Published
Structure and optical properties of CuxO- and CuxSe-doped sol–gel silica glasses
Gurin, V. S., Alexeenko, A. A., Yumashev, K. V., Prokoshin, P. V., Zolotovskaya, S. & Zhavnerko, G. A., 15/12/2003, In: Materials Science and Engineering: C . 23, 6-8, p. 1063-1067 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Physical test data for the appraisal of design procedures for bolted joints in pultruded FRP structural shapes and systems.
Mottram, J. T. & Turvey, G. J., 10/2003, In: Progress in Structural Engineering and Materials. 5, 4, p. 195-222 28 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Development of a virtual instrument system for industrial process tomography.
Deloughry, R., Davenport, I., Ma, X. & Ponnapalli, P. V. S., 09/2003. 5 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Image reconstruction in 3D magnetic induction tomography using a FEM forward model.
Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X., 09/2003. 4 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Imaging the flow profile of molten steel through a submerged pouring nozzle.
Ma, X., Peyton, A. J., Binns, R. & Higson, S. R., 09/2003. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Free-edge effect in cross-ply laminated hollow cylinders subjected to axisymmetric transverse loads
Ye, J. Q. & Sheng, H. Y., 08/2003, In: International Journal of Mechanical Sciences. 45, 8, p. 1309-1326 18 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
On the particle size and molecular weight distributions of clinical bone cements
Liu, C. Z., Green, S. M., Watkins, N. D. & McCaskie, A. W., 08/2003, In: Journal of Materials Science Letters. 22, 16, p. 1147-1150 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Optimal algorithms for wavelet-based denoising in PD measurement.
Zhou, C., Ma, X. & Kemp, I. J., 08/2003. 4 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Process characteristics and effects of gas- and water-atomized stainless steel powders in laser-based rapid tooling
Pinkerton, A. J. & Li, L., 08/2003, In: Journal of Laser Applications. 15, 3, p. 172-178 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...4 5 6 7 8 9 10 11 Next

Research

Manufacturing

Quick Links

Connect With Us