Home > Research > Manufacturing > Publications & Outputs

Research

View graph of relations

Manufacturing

901 - 1000 out of 1,001Page size: 100
RSS feed of this list
  1. 2000
  2. Published

    Interfacial effects on stress transfer in fiber-reinforced composites

    Wu, Z. J., Ye, J. Q. & Cabrera, J. G., 2000, In: Mechanics of Composite Materials and Structures. 7, 4, p. 315-330 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  3. Published

    Moment – rotation tests on bolted end connections in pultruded GRP beams – tests with stainless steel cleata and an assessment of their performance relative to GRP cleats.

    Turvey, G. J., 2000, Proceedings in the ECCM9 (composites – from fundamentals to exploitation). Brighton

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  4. Published

    Semi-rigid column base connections in pultruded GRP frame structures.

    Turvey, G. J. & Cooper, C., 2000, In: Computers and Structures. 76, 1-3, p. 77-88 12 p.

    Research output: Contribution to Journal/Magazine › Journal article

  5. Published

    Simulation and manufacture of wax toolfaces for the creation of silicone rubber tools using Magics™ RP software

    Rennie, A. & Bennett, G. R., 2000, In: International Journal of Engineering Simulation. 1, 3, p. 24-30 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    The dependence of recovery behaviour on mechanical properties of bone cement

    Green, S., Liu, C., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 2000, PIMS 2000 : 9th International Conference on Polymers in Medicine & Surgery, 11 - 13 September 2000, Danube University, Krems, Austria. London: IOM communications, p. 89

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  7. Published

    Uniform and patch loaded steel plates – comparisons between analysis and experiment.

    Turvey, G. J. & Osman, M. Y., 2000, Proceedings of the 5th international conference on computational structures technology. Leuven

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  8. Published

    Uniform and patch loaded steel plates: comparisons between analysis and experiment.

    Turvey, G. J. & Osman, M. Y., 2000, Computational steel structures technology. Ivanyi, M., Muzeau, J. P. & Topping, B. H. V. (eds.). Edinburgh: Civil-Comp Press, p. 49-59 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  9. 1999
  10. Published

    Flexure of pultruded GRP beams with semi-rigid end connections.

    Turvey, G. J., 12/1999, In: Composite Structures. 47, 1, p. 571-580 10 p.

    Research output: Contribution to Journal/Magazine › Journal article

  11. Published

    Small-sized real-time digital simulator for the test of protective relay.

    Liang, Z., Ma, X., Wang, H., Chen, Y. & Wang, L., 12/1999, In: Dianli Xitong Zidonghue/Automation of Electric Power Systems. 23, 23, p. 27-30 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  12. Published

    Buckling analysis of angle-ply multilaminated long hollow cylinders

    Ye, J. Q., 08/1999, In: Journal of Engineering Mechanics. 125, 8, p. 964-969 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  13. Published

    Fibre Reinforced Polymer Composite Structural Pultrusions and Their End Connections.

    Turvey, G. J., 1999, Composites and Plastics in Construction: BRE, Watford, UK, 16th-18th November 1999. RAPRA, p. 1-8 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  14. Published

    Interfacial effects On RC beams strengthened by bonded composite plates

    Ye, J., 1999, Proceedings of the Second Asia Pacific Specialty Conference on Fiber Reinforced Concrete . Lok, T. S. & Tseng, K. (eds.). Singapore

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  15. Published

    Non-linear FEM for RC shear wall structures

    Shen, P., Ye, J. & Cai, S., 1999, Developments in Analysis & Design Using FEM: 7th Int. Conf. Civil. Struct. Eng., Oxford. Topping, B. H. V. & Kumar, B. (eds.). Stirling: Civil-Comp Press, p. 181-186 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  16. Published

    Semi-rigid bolted connections in pultruded GRP beams and simple frames: part 1

    Turvey, G. J., 1999, Proceedings of the COST C1 conference: COST C1: control of the semi-rigid behaviour of civil engineering structural connections. Liege, p. 547-556 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  17. 1998
  18. Published

    A portable multi-functional real-time digital simulator dedicated to protective relay testing

    Liang, Z., Ma, X., Wang, H. & Wang, L., 12/1998, In: Electricity. 9, 4, p. 27-29 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    Error bounds on the eigenvalues of a linearized dynamic stiffness matrix

    Ye, J. Q., 04/1998, In: Communications in Numerical Methods in Engineering. 14, 4, p. 305-312 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    Decay rate of boundary effects in laminated composite cylinders and cylindrical panels.

    Ye, J., 1998, Proceedings of the 1998 ASME Engineering Systems Design and Analysis (ESDA) Conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  21. Published

    Elastic large deflection analysis of stiffened annular sector plates.

    Turvey, G. J. & Salehi, M., 1998, In: International Journal of Mechanical Sciences. 40, 1, p. 51-70 20 p.

    Research output: Contribution to Journal/Magazine › Journal article

  22. Published

    Frame connections.

    Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 27-49 23 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  23. Published

    Plate-to-plate mechanical: part II: testing and applications.

    Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 15-26 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  24. Published

    Recent developments in testing, design analysis and modelling of bolted connections in pultruded GRP frames made of open-section profiles.

    Turvey, G. J., 1998, Proceedings of the 4th EPTA world pultrusion conference. European Pultrusion Technology Association, p. 14

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  25. Published

    Semi-rigid behaviour of civil engineering structural connection.

    Mottram, J. T. & Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and application of polymeric composite connections. Brussels/Luxembourg: European Commission, p. 99-99 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  26. Published

    Semi-rigid connection in pultruded GRP frame structures.

    Turvey, G. J. & Cooper, C., 1998, Mechanics of composite materials and structures. Mota Soares, C. A. ,., Mota Soares, A. M. & Freitas, M. J. M. (eds.). p. 151-166 16 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  27. Published

    Semi-rigid connections and their effects on the sway response of pultruded GRP columns in low-rise construction.

    Turvey, G. J. & Cooper, C., 1998, Proceedings of the 2nd international conference on composites in infrastructure (ICCI ’98). University of Arizona, p. 221-235 15 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  28. Published

    Single-bolt tension joint tests on pultruded GRP plate: effects of the orientation of the tension direction relative to pultrusion direction.

    Turvey, G. J., 1998, In: Composite Structures. 42, 4, p. 341-351 11 p.

    Research output: Contribution to Journal/Magazine › Journal article

  29. Published

    Torsion tests on pultruded GRP sheet.

    Turvey, G. J., 1998, In: Composites Science and Technology. 58, 8, p. 1343-1351 9 p.

    Research output: Contribution to Journal/Magazine › Journal article

  30. Published

    Uplift tests on column base connections in pultruded GRP frames.

    Turvey, G. J. & Cooper, C., 1998, In: Proceedings of the eighth international conference on composite materials (ECCM-8). p. 285-292 8 p.

    Research output: Contribution to Journal/Magazine › Journal article

  31. 1997
  32. Published

    Real-time digital simulator (RTDS) and it applications

    Liang, Z., Ma, X., Wang, L., Kuffel, R. & Jiang, X., 10/1997, In: Dianli Xitong Zidonghue/Automation of Electric Power Systems. 21, 10, p. 61-64 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Published

    A system for the generation of liquid metal droplets using electromotive forces

    Rennie, A. & Bennett, G. R., 09/1997, Proceedings World Congress: Manufacturing Technology Towards 2000: Incorporating the 7th International Conference on Manufacturing Engineering and the 3rd Australasian Conference on Rapid Product Development. James Cook University of North Queensland, p. 501-510 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  34. Published

    Axisymmetric vibration of laminated annular plates composed of transversely isotropic layers

    Ye, J. Q., 14/08/1997, In: Journal of Sound and Vibration. 205, 2, p. 250-256 7 p.

    Research output: Contribution to Journal/Magazine › Letter › peer-review

  35. Published

    Quadratic representation of a nonlinear dynamic stiffness matrix and related eigenvalue problems

    Ye, J. Q. & Williams, F. W., 15/07/1997, In: Computer Methods in Applied Mechanics and Engineering. 146, 3-4, p. 313-323 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    Development of a Continuous Droplet Generation System of Molten Metals using Electromotive Forces, with a View to its use in the Rapid Tooling Industry

    Rennie, A. & Bennett, G. R., 07/1997, Proceedings of the Thirty-Second International Manufacturing, Automation and Systems, Technology, Applications, Design, Organisation and Management, Research (MATADOR) Conference. p. 399-403 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  37. Published

    Three-dimensional vibrations of cross-ply laminated hollow cylinders with clamped edge boundaries

    Ye, J. Q. & Soldatos, K. P., 07/1997, In: Journal of Vibration and Acoustics. 119, 3, p. 317-323 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Published

    XPS characterisation of surface modified Ni-Ti shape memory alloy

    Green, S. M., Grant, D. M. & Wood, J. V., 31/03/1997, In: Materials Science and Engineering: A. 224, 1–2, p. 21-26 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  39. Published

    A three-dimensional free vibration analysis of cross-ply laminated rectangular plates with clamped edges

    Ye, J. Q., 30/01/1997, In: Computer Methods in Applied Mechanics and Engineering. 140, 3-4, p. 383-392 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    Analysis of pultruded glass reinforced plastic beams with semi-rigid end connections.

    Turvey, G. J., 1997, In: Composite Structures. 38, 1, p. 3-16 14 p.

    Research output: Contribution to Journal/Magazine › Journal article

  41. Published

    Axisymmetric vibration analysis of laminated hollow cylinders with ring stiffeners

    Ye, J. Q., 1997, In: Composite Structures. 38, 1-4, p. 151-156 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  42. Published

    Circular plates with one diametral stiffener: an elastic large deflection analysis.

    Turvey, G. J. & Salehi, M., 1997, In: Computers and Structures. 63, 4, p. 775-783 9 p.

    Research output: Contribution to Journal/Magazine › Journal article

  43. Published

    Full-section yield analysis of uniformly loaded sector plates.

    Turvey, G. J. & Salehi, M., 1997, Trends in structural mechanics: theory, practice and education. Roorda, J. & Srivastava, N. K. (eds.). v. 54 ed. Dordrecht; London: Kluwer Academic, p. 289-298 10 p. (Solid mechanics and its applications).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  44. Published

    Non-linear first yield analysis of circular plates subjected to combined uniform pressure and edge compression.

    Turvey, G. J. & Drinali, H., 1997, In: Computers and Structures. 63, 4, p. 769-773 5 p.

    Research output: Contribution to Journal/Magazine › Journal article

  45. Published

    Powder metallurgical processing of Ni-Ti shape memory alloy

    Green, S. M., Grant, D. M. & Kelly, N. R., 1997, In: Powder Metallurgy. 40, 1, p. 43-47 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  46. Published

    Shape Memory Transformation in Mechanically Alloyed Ni-50at % Ti

    Green, S. M., Grant, D. M. & Wood, J. V., 1997, In: Journal de Physique 4. 07, C5, p. 351-356 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  47. Published

    Vibration of laminated composite panels with intermediate point supports and clamped edges

    Ye, J., 1997, Proceedings of the 2nd International Symposium on Structures and Foundations in Civil Engineering. Shen, C. K., Kuang, J. S. & Ng, C. W. W. (eds.). Hong Kong: Department of Civil and Structural Engineering, The Hong Kong University of Science and Technology, p. 103-108

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  48. 1996
  49. Published

    The wear of High Speed Selective Jet Electrodeposition electrodes when used as EDM tools

    Dover, S. J., Rennie, A. & Bennett, G. R., 11/1996, Proceedings of the Second National Conference on developments in rapid prototyping and tooling. Mechanical Engineering Publications Ltd, p. 187-199 13 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  50. Published

    Rapid prototyping using electrodeposition of copper

    Dover, S. J., Rennie, A. & Bennett, G. R., 08/1996, Solid Freeform Fabrication Symposium 1996. University of Texas at Austin, p. 191-198 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  51. Published

    Effect of load position on the lateral buckling of pultruded GRP cantilevers - correlations between experiment and theory.

    Turvey, G. J., 05/1996, In: Composite Structures. 35, 1, p. 33-47 15 p.

    Research output: Contribution to Journal/Magazine › Journal article

  52. Published

    Three-dimensional vibration of laminated composite plates and cylindrical panels with arbitrarily located lateral surfaces point supports

    Ye, J. Q. & Soldatos, K. P., 03/1996, In: International Journal of Mechanical Sciences. 38, 3, p. 271-281 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  53. Published

    Analytical solutions of composite plate and shell structures and their engineering applications

    Ye, J., 1996, Advances in Applied Mechanics Research in the UK. Beijing: Science Press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  54. Published

    Axisymmetric vibration analysis of laminated hollow spheres composed of transversely isotropic layers

    Ye, J. & Soldatos, K. P., 1996, Proceedings of the 1996 Engineering Systems Design and Analysis Conference. Sabir, A. B. (ed.). American Society of Mechanical Engineers

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  55. Published

    Characterisation of the short term static moment - rotation response of bolted connections between pultruded GRP beam and column WF-sections.

    Turvey, G. J. & Cooper, C., 1996, Proceedings of the 2nd international conference on advanced composite materials in bridges and structures (ACMBS II). Montreal: Canadian Society for Civil Engineering, p. 927-934 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  56. Published

    Elastic and initial flexural failure analysis of unsymmetrically laminated cross-ply strips.

    Turvey, G. J. & Osman, M. Y., 1996, In: Composites Part B: Engineering. 27, 5, p. 505-518 14 p.

    Research output: Contribution to Journal/Magazine › Journal article

  57. Published

    Full-range response of circular steel plates subjected to combined transverse pressure and edge compression.

    Turvey, G. J. & Drinali, H., 1996, Advances in computational techniques for structural engineering. Topping, B. H. V. (ed.). Edinburgh: Civil-Comp Press, 313 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  58. Published

    Lateral buckling tests on pultruded GRP I-section beams with simply supported - simply supported and clamped - simply supported end conditions.

    Turvey, G. J. & Brooks, R. J., 1996, Proceedings of the 1st international conference on composites in infrastructure (ICCI '96). University of Arizona, p. 651-664 14 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  59. Published

    Lateral buckling tests on rectangular cross-section pultruded GRP cantilever beams.

    Turvey, G. J., 1996, In: Composites Part B: Engineering. 27, 1, p. 35-42 8 p.

    Research output: Contribution to Journal/Magazine › Journal article

  60. Published

    Semi-rigid pultruded GRP frame connections: tests to determine static moment-rotation characteristics.

    Turvey, G. J. & Cooper, C., 1996, ECCM-7 Seventh European Conference on Composite Materials : realising their commercial potential. Bader, M. (ed.). Cambridge: Woodhead Publishing Limited, p. 295-300 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  61. Published

    Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project

    Turvey, G. J., 1996, Structural design of polymer composites: EUROCOMP design code and handbook. Clarke, J. L. (ed.). London: E. and FN Spon, p. 719-741 23 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  62. 1995
  63. Published

    Axisymmetric Buckling of Homogeneous and Laminated Circular Plates

    Ye, J., 08/1995, In: Journal of Structural Engineering. 121, 8, p. 1221-1224 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  64. Published

    Axisymmetrical static and dynamic analysis of laminated hollow cylinders composed of monoclinic elastic layers

    SOLDATOS, K. P. & Ye, J., 13/07/1995, In: Journal of Sound and Vibration. 184, 2, p. 245-259 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  65. Published

    Bounding properties for eigenvalues of a transcendental dynamic stiffness matrix by using a quadratic matrix pencil

    Ye, J. & Williams, F. W., 6/07/1995, In: Journal of Sound and Vibration. 184, 1, p. 173-183 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  66. Published

    Three-dimensional buckling analysis of laminated composite hollow cylinders and cylindrical panels

    Ye, J. & Soldatos, K. P., 07/1995, In: International Journal of Solids and Structures. 32, 13, p. 1949-1962 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  67. Published

    A successive bounding method to find the exact eigenvalues of transcendental stiffness matrix formulations

    Ye, J. & Williams, F. W., 30/03/1995, In: International Journal for Numerical Methods in Engineering. 38, 6, p. 1057-1067 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  68. Published

    Stationary thermoelastic analysis of thick cross-ply laminated cylinders and cylindrical panels

    SOLDATOS, K. P. & Ye, J., 03/1995, In: Acta Mechanica. 110, 1-4, p. 1-18 18 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  69. Published

    The surface performance of shot peened and ion implanted NiTi shape memory alloy

    Grant, D. M., Green, S. M. & Wood, J. V., 03/1995, In: Acta Metallurgica et Materialia. 43, 3, p. 1045-1051 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  70. Published

    Axisymmetric buckling analysis of homogeneous and laminated annular plates

    Ye, J., 1995, In: International Journal of Pressure Vessels and Piping. 62, 2, p. 153-159 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  71. Published

    Axisymmetric elastic postbuckling of circular plates

    Ye, J., 1995, In: International Journal of Pressure Vessels and Piping. 62, 3, p. 213-217 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  72. Published

    Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet material.

    Cooper, C. & Turvey, G. J., 1995, In: Composite Structures. 32, 1-4, p. 217-226 10 p.

    Research output: Contribution to Journal/Magazine › Journal article

  73. Published

    Large deflection analysis of eccentrically stiffened sector plates.

    Turvey, G. J. & Salehi, M., 1995, Proceedings of a conference on developments in computational techniques for civil engineering (CIVIL-COMP 95). Topping, B. H. V. (ed.). Edinburgh: Civil-Comp Press, p. 243-253 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  74. Published

    Lateral buckling of pultruded GRP I-section cantilevers

    Brooks, R. J. & Turvey, G. J., 1995, In: Composite Structures. 32, 1-4, p. 203-215 13 p.

    Research output: Contribution to Journal/Magazine › Journal article

  75. Published

    On three-dimensional buckling analysis of orthotropic cylinders

    Soldatos, K. P. & Ye, J., 1995, Proceedings 15th Canadian Congress of Applied Mechanics CANCAM 95. Tabarrock, B. & Dost, S. (eds.).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  76. Published

    Single bolt tension joint tests on pultruded GRP WF-section web and flange material.

    Turvey, G. J. & Cooper, C., 1995, Proceedings of the 10th international conference on composite materials (ICCM-10). Poursartip, A. & Street, K. (eds.). Vancouver: Woodhead Publishing Ltd., p. 621-628 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  77. Published

    Surface performance of a Ni-Ti shape memory alloy

    Green, S., Grant, D. M. & Wood, J. V., 1995, Proceedings of SMST-94 : the First International Conference on Shape Memory and Superelastic Technologies, March 7-10, 1994, Asilomar Conference Center, Pacific Grove, California. Pelton, A. R., Hodgson, D. & Duerig, T. W. (eds.). Monterey, Calif.: Published under the aegis of the Organizing Committee of SMST-94, p. 91-96 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  78. Published

    Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project

    Turvey, G. J., 1995, EUROCOMP design guide and background projects. Clarke, J. L. (ed.). London: Chapman and Hall

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  79. Published

    Three-dimensional buckling analysis of orthotropic cylinders subjected to thermo-mechanical loadings.

    Soldatos, K. P. & Ye, J., 1995, Homogeneity and Nonlinearity in Solid Mechanics . Parker, D. F. & England, A. H. (eds.). Kluwer Academic Publishers, (Solid Mechanics and Its Applications; vol. 39).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  80. 1994
  81. Published

    Wave propagation in anisotropic laminated hollow cylinders of infinite extent

    SOLDATOS, K. P. & Ye, J., 12/1994, In: Journal of the Acoustical Society of America. 96, 6, p. 3744-3752 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  82. Published

    Bounding Properties For Eigenvalues Of A Transcendental Constrained Matrix By Using A Simple Matrix Pencil

    Ye, J. & Williams, F. W., 20/10/1994, In: Journal of Sound and Vibration. 177, 2, p. 282-287 6 p.

    Research output: Contribution to Journal/Magazine › Letter › peer-review

  83. Published

    An alternative approach for large deflection analysis of axisymmetric plates on elastic foundation

    Ye, J., 08/1994, In: Communications in Numerical Methods in Engineering. 10, 8, p. 623-632 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  84. Published

    Three-dimensional stress analysis of orthotropic and cross-ply laminated hollow cylinders and cylindrical panels

    Ye, J. & Soldatos, K. P., 08/1994, In: Computer Methods in Applied Mechanics and Engineering. 117, 3-4, p. 331-351 21 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  85. Published

    Large Deflection of Imperfect Plates by Iterative BE‐FE Method

    Ye, J., 03/1994, In: Journal of Engineering Mechanics. 120, 3, p. 431-444 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  86. Published

    Elastic small deflection analysis of annular sector mindlin plates.

    Kobayashi, H. & Turvey, G. J., 1994, In: International Journal of Mechanical Sciences. 36, 9, p. 811-827 17 p.

    Research output: Contribution to Journal/Magazine › Journal article

  87. Published

    On bending of rhombic plates.

    Kobayashi, H., Ishikawa, K. & Turvey, G. J., 1994, Proceedings of the annual conference of Japanese society of civil engineers.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  88. Published

    Three-dimensional static, dynamic, thermoelastic and buckling analysis of homogeneous and laminated composite cylinders

    SOLDATOS, K. P. & Ye, J., 1994, In: Composite Structures. 29, 2, p. 131-143 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  89. Published

    Three-dimensional vibration of laminated cylinders and cylindrical panels with symmetric or antisymmetric cross-ply lay-up

    Ye, J. & Soldatos, K. P., 1994, In: Composites Part B: Engineering. 4, 4, p. 429-444 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  90. 1993
  91. Published

    Digital power system simulators applied to protective relay testing

    Wu, J., Liang, Z., Ma, X. & Wang, H., 11/1993, In: Dianli Xitong Zidonghue/Automation of Electric Power Systems. 17, 11, p. 47-51 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  92. Published

    Postbuckling Analysis of Plates Under Combined Loads by a Mixed Finite Element and Boundary Element Method

    Ye, J., 08/1993, In: Journal of Pressure Vessel Technology. 115, 3, p. 262-267 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  93. Published

    A unified approach for the linear and nonlinear analysis of plates and shallow shells

    Ye, J., 1993, In: Thin-Walled Structures. 17, 3, p. 223-236 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  94. Published

    Effect of N+ ion implantation on the shape-memory behaviour and corrosion resistance of an equiatomic Ni Ti alloy

    Green, S. M., Grant, D. M., Wood, J. V., Johanson, A., Johnson, E. & Sarholt-Kristensen, L., 1993, In: Journal of Materials Science Letters. 12, 9, p. 618-619 2 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  95. Published

    Exact solutions of buckling for simply supported thick laminates

    Fan, J. & Ye, J., 1993, In: Composite Structures. 24, 1, p. 23-28 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  96. 1992
  97. Published

    Optimum mass design of prismatic assemblies of plates with longitudinal voids

    Williams, F. W. & Ye, J., 17/07/1992, In: Computers and Structures. 44, 3, p. 557-565 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  98. Published

    Optimum mass design of laminated plates with longitudinal mid-surface voids

    Williams, F. W. & Ye, J., 17/04/1992, In: Computers and Structures. 43, 2, p. 265-272 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  99. Published

    Axisymmetric nonlinear analysis of shallow spherical shells by a combined boundary element and finite difference method

    Ye, J., 1992, In: Engineering Analysis with Boundary Elements. 9, 4, p. 283-287 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  100. Published

    Tension/compression strength of unnotched/notched pultruded GRP plate.

    Turvey, G. J., 1992, Proceedings of the ECCM-composites testing and standardisation conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  101. Published

    Tests on pultruded GRP posts for handrail/barrier structures.

    Turvey, G. J. & Slater, R. C., 1992, First international conference on advanced composite materials in bridges and structures. Canada

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  102. 1991
  103. Published

    Large deflection analysis of axisymmetric circular plates with variable thickness by the boundary element method

    Ye, J., 06/1991, In: Applied Mathematical Modelling. 15, 6, p. 325-328 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  104. Published

    Non-linear bending analysis of plates and shells by using a mixed spline boundary element and finite element method

    Ye, J., 20/05/1991, In: International Journal for Numerical Methods in Engineering. 31, 7, p. 1283-1294 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  105. Published

    Development of communication simulation software for TMS32010 multi-processor parallel system

    Ma, X. & Wu, J., 1991, In: Industrial Control Computer. p. 37-39 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  106. 1990
  107. Published

    Exact Solutions for Axisymmetric Vibration of Laminated Circular Plates

    Fan, J. & Ye, J., 04/1990, In: Journal of Engineering Mechanics. 116, 4, p. 920-927 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  108. Published

    A series solution of the exact equation for thick orthotropic plates

    Fan, J. & Ye, J., 1990, In: International Journal of Solids and Structures. 26, 7, p. 773-778 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  109. Published

    An exact solution for the statics and dynamics of laminated thick plates with orthotropic layers

    Fan, J. & Ye, J., 1990, In: International Journal of Solids and Structures. 26, 5-6, p. 655-662 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  110. Published

    Functional simulation of logic digital system with microprocessor

    Ma, X. & Wu, J., 1990, In: Dianli Xitong Zidonghue/Automation of Electric Power Systems. 14, 3, p. 57-64 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  111. 1989
  112. Published

    Thin plates of variable thickness with linear flexural rigidity

    Ye, J. & Xiao, H., 04/1989, In: Communications in Applied Numerical Methods. 5, 3, p. 153-158 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...6 7 8 9 10 11 Next

Back to top