Home > Research > Structures, Materials and Manufacturing > Publications & Outputs

Research

View graph of relations

Structures, Materials and Manufacturing

251 - 300 out of 968Page size: 50
RSS feed of this list
  1. 2015
  2. Published

    Metamaterials with negative Poisson’s ratio: a review of mechanical propterties and deformation mechanisms

    Hou, X. & Silberschmidt, V., 10/04/2015, Mechanics of Advanced Materials: Analysis of Properties and Performance. Silberschmidt, V. V. & Matveenko, V. P. (eds.). Springer International Publishing, p. 155-179 25 p. (Engineering Materials).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  3. Published

    Carpet recycling: a review of recycled carpets for structural composites

    Sotayo, A., Green, S. & Turvey, G., 04/2015, In: Environmental Technology and Innovation. 3, p. 97-107 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    Enhancing the load capacity of pultruded GFRP beams via discrete load redistribution

    Turvey, G., 04/2015, In: Composite Structures. 122, p. 352-360 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  5. Published

    The lost crown of Horus

    Kaufman, J. & Rennie, A. E. W., 04/2015, Ancient Egypt, 15, 5, p. 22-23 2 p.

    Research output: Contribution to specialist publication › Article

  6. Published

    Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art

    Kaufman, J., Rennie, A. & Clement, M., 1/03/2015, In: Journal of Computing and Information Science in Engineering. 15, 1, 7 p., 011006.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Comparative evaluation of optimum additive manufacturing technology to fabricate medical bespoke prototypes obtained with composite materials

    Ulmeanu, M., Doicin, C., Baila, D., Rennie, A. E. W., Neagu, C. & Laha, S., 03/2015, In: Revista de Materiale Plastice. 52, 3, p. 416-422 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    Powder removal from Ti-6Al-4V cellular structures fabricated via electron beam melting

    Hasib, H., Harrysson, O. L. A. & West, H. A., 03/2015, In: JOM Journal of the Minerals, Metals and Materials Society. 67, 3, p. 639-646 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artefacts

    Kaufman, J., Rennie, A. & Clement, M., 03/2015. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  10. Published

    Hybrid optical-fibre/geopolymer sensors for structural health monitoring of concrete structures

    Perry, M., Saafi, M., Fusiek, G. & Niewczas, P., 24/02/2015, In: Smart Materials and Structures. 24, 4, 8 p., 045011.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. Published

    Determination of head losses in drip irrigation laterals with cylindrical in-line type emitters through CFD analysis

    Celik, K., Karayel, D., Lupeanu, M., Rennie, A. E. W. & Akinci, I., 20/02/2015, In: Bulgarian Journal of Agricultural Science. 21, 3, p. 703-710 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  12. Published

    Advances in the modelling of laser direct metal deposition (invited)

    Pinkerton, A., 02/2015, In: Journal of Laser Applications. 27, S1, 7 p., S15001.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  13. Published

    Designing advanced filtration media through metal additive manufacturing

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 02/2015. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  14. Published

    Experimental investigation of the mechanical properties of neoprene coated nylon woven reinforced composites

    Aboshio, A., Green, S. & Ye, J., 02/2015, In: Composite Structures. 120, p. 386-393 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    Model-based and fuzzy logic approaches to condition monitoring of operational wind turbines

    Cross, P. & Ma, X., 02/2015, In: International Journal of Automation and Computing. 12, 1, p. 25-34 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    Performance of an improved combination unit of Pd-membrane methane steam reformer and intermediate temperature solid oxide fuel cell (C-Pd-ITSOFC)

    Vivanpatarakij, S., Aiouache, F. & Assabumrungrat, S., 30/01/2015, In: International Journal of Hydrogen Energy. 40, 4, p. 1894-1901 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. Published

    Enhanced properties of graphene/fly ash geopolymeric composite cement

    Saafi, M., Tang, L., Fung, J., Rahman, M. & Liggat, J., 01/2015, In: Cement and Concrete Research. 67, p. 292-299 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    Flexural behavior of pultruded glass fibre reinforced polymer composite beams with bolted splice joints

    Turvey, G. & Cerutti, X., 01/2015, In: Composite Structures. 119, 1, p. 543-550 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    A 2D electro-mechanical model of human atrial tissue using the discrete element method

    Brocklehurst, P., Adeniran, I., Yang, D., Sheng, Y., Zhang, H. & Ye, J., 2015, In: Biomed Research International. 2015, 12 p., 854953.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    Bending of unequal span continuous pultruded glass fibre reinforced polymer (GFRP) beams

    Turvey, G. J., 2015, Advanced Composites in Construction, ACIC 2015 - Proceedings of the 7th Biennial Conference on Advanced Composites In Construction. p. 227-232 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  21. Published

    Characterisation of the TRIUMF neutron facility using a Monte Carlo simulation code

    Monk, S., Abram, T. & Joyce, M., 2015, In: Radiation Protection Dosimetry. 164, 3, p. 228-238 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    Development of database for checking fixtures for automotive parts

    Abdullah, Z., Imran, S., Amran, M., Hasib, H., Muhammad, N. S. & Jaafar, R., 2015, In: Applied Mechanics and Materials. 761, p. 37-41 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  23. Published

    Fast estimate of the SAR using spline interpolation approach for parallel transmit B1 mapping in ultra-high field MRI

    Letizia, R., Ye, J., Grover, P. & Shah, S., 2015.

    Research output: Working paper

  24. Published

    Horizon 2020 TWEETHER project for W-band high data rate wireless communications

    Paoloni, C., Letizia, R., Napoli, F., Ni, Q., Rennie, A., Zimmerman, R., Andre, F., Pham, K., Krozer, V., Magne, F., Burciu, I., Ramirez, A., Rocchi, M., Marilier, M. & Vilar, R., 2015, Vacuum Electronics Conference (IVEC), 2015 IEEE International . IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  25. Published

    Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing

    Hasib, H., Rennie, A., Burns, N. & Geekie, L., 2015, In: Filtration. 15, 3, p. 174-180 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  26. Published

    Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artifacts

    Kaufman, J., Rennie, A. E. W. & Clement, M., 2015, In: Procedia CIRP. 36, p. 223-229 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    Structural performance assessment of a woven-fabric reinforced composite as applied in construction of inflatable offshore fender barrier structures

    Aboshio, A., Green, S. & Ye, J., 2015, In: International Journal of Structural Stability and Dynamics. 15, 1, 22 p., 1450036.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  28. 2014
  29. Published

    Monitoring degradation in the field

    Swingler, J., Jones, J., Bryant, M. D., Feinberg, A., Ma, X. & Weaver, P. M., 30/12/2014, The physics of degradation in engineered materials and devices: fundamentals and principles. Swingler, J. (ed.). Momentum Press , p. 117-151 34 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

  30. Published

    Developing novel structural composites from recycled materials

    Sotayo, A., Green, S. & Turvey, G., 16/12/2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  31. Published

    A fast interpolation approach for the calculation of permittivity and conductivity to estimate the SAR

    Priyadarshi, S., Pitman, S., Glover, P., Shah, S., Ye, J., Hu, B. & Letizia, R., 8/12/2014, RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-Bio), 2014 IEEE MTT-S International Microwave Workshop Series on. IEEE, p. 261-266 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  32. Published

    Low secondary electron yield engineered surface for electron cloud mitigation

    Valizadeh, R., Malyshev, O. B., Wang, S., Zolotovskaya, S., Gillespie, W. A. & Abdolvand, A., 8/12/2014, In: Applied Physics Letters. 105, 23, 5 p., 231605.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Unpublished

    Additive manufacturing in assistive product design development

    Sembiring, E., Rennie, A. & Laha, S., 12/2014, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  34. Unpublished

    Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing

    Hasib, H., Rennie, A., Burns, N. & Geekie, L., 12/2014, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  35. Published

    Touching history: 3D replica artifacts

    Kaufman, J. & Rennie, A., 12/2014, Ancient Egypt, 15, 3, p. 32-33 2 p.

    Research output: Contribution to specialist publication › Article

  36. Published

    Evaluation of an in situ spatial resolution instrument for fixed beds through the assessment of the invasiveness of probes and a comparison with a micro-kinetic model

    Touitou, J., Aiouache, F., Burch, R., Roy, D., Hardacre, C., Morgan, K., Sa, J., Stewart, C., Stewart, J. & Goguet, A., 11/2014, In: Journal of Catalysis. 319, p. 239-246 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    Nonlinear system identification for model-based condition monitoring of wind turbines

    Cross, P. & Ma, X., 11/2014, In: Renewable Energy. 71, p. 166-175 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Published

    Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing

    Hasib, H., Rennie, A., Burns, N. & Geekie, L., 11/2014, The Filtration Society 50th Anniversary International Conference and Exhibition: Proceedings of the . The Filtration Society, 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  39. Published

    Three-dimensional state space spline finite strip analysis of angle-plied laminates

    Attallah, K. M. Z., Yu, M. & Ye, J., 11/2014, In: Composites Part B: Engineering. 66, p. 25-35 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    Filtration efficiency gains by fabrication using additive manufacturing

    Burns, N., Vijayakumar, B., Rennie, A. & Geekie, L., 10/2014, Proceedings of the European Conference on Fluid-Particle Separation. 2 p. M3P2

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  41. Published

    Introducing functionality to filter media

    Vijayakumar, B., Rennie, A., Burns, N., Travis, D. & Battersby, P., 10/2014, In: Filtration. 14, 4, p. 217-222 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  42. Published

    Maximising open area whilst retaining strength in novel metal additive manufactured filter media

    Burns, N., Burns, M., Travis, D., Geekie, L., Hasib, H. & Rennie, A., 10/2014. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  43. Published

    The use of additive manufacture for metallic bipolar plates in polymer electrolyte fuel cell stacks

    Dawson, R., Patel, A., Rennie, A. & White, S., 28/09/2014, In: Chemical Engineering Transactions. 41, p. 175-180 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  44. Published

    On the frequency-doubled conically-refracted Gaussian beam

    Grant, S. D., Zolotovskaya, S., Kalkandjiev, T. K., Gillespie, W. A. & Abdolvand, A., 8/09/2014, In: Optics Express. 22, 18, p. 21347-21353 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  45. Published

    Automated software for streamlining optimisation of resource planning for an additive manufacturing system

    Lupeanu, M., Rosu, M-M., Doicin, C., Rennie, A. & Neagu, C., 09/2014, Proceedings of 3rd International Conference Advances in Engineering & Management (ADEM 2014). 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  46. Published

    Effects of scan direction and orientation on mechanical properties of laser sintered polyamide-12

    Nelson, J. A., Galloway, G., Rennie, A., Abram, T. & Bennett, G. R., 09/2014, In: International Journal of Advanced Design and Manufacturing Technology. 7, 3, p. 19-25 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  47. Published

    Innovations in filtration through additive manufacturing: Paper: EP140165

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 09/2014. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  48. Published

    New constitutive model for anisotropic hyperelastic biased woven fibre reinforced composite

    Aboshio, A., Green, S. & Ye, J., 09/2014, In: Plastics, Rubber and Composites. 43, 7, p. 225-234 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  49. Published

    Surface plasmon resonance assisted rapid laser joining of glass

    Zolotovskaya, S. A., Tang, G., Wang, Z. & Abdolvand, A., 25/08/2014, In: Applied Physics Letters. 105, 8, 5 p., 083109.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  50. Published

    A unified method for calculating fire resistance of solid and hollow concrete-filled steel tube columns based on average temperature

    Yu, M., Zha, X., Ye, J. & Wang, B., 15/07/2014, In: Engineering Structures. 71, p. 12-22 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  51. Published

    Improved filtration using additive manufacturing

    Burns, N., Geekie, L., Travis, D., Burns, M., Weston, D. P. & Rennie, A., 07/2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  52. Published

    Experimental investigation of the mechanical properties of neoprene coated nylon woven reinforced composites

    Aboshio, A., Green, S. & Ye, J., 8/06/2014, Proceedings of the first international conference on mechanics of composites, Stony Brook University, New York.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 12 3 4 5 6 7 8 9 ...20 Next

Back to top