Xiaonan Hou - Publications & Outputs - Research Portal

Dr Xiaonan Hou

Senior Lecturer in Mechanical Engineering

1 - 50 out of 56Page size: 50

RSS feed of this list

Sort by: Author last name

Published
Morphological characterization and reconstruction of fractured heat-treated glass
Zhu, Y., Yang, J., Wang, X.-E., Xie, D. & Hou, X., 15/09/2023, In: Journal of Non-Crystalline Solids. 616, 18 p., 122455.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Dynamic Finite Element Model Based on Timoshenko Beam Theory for Simulating High-Speed Nonlinear Helical Springs
Zhao, J., Gu, Z., Yang, Q., Shao, J. & Hou, X., 4/04/2023, In: Sensors. 23, 7, 11 p., 3737.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The influence of notching and mixed-adhesives at the bonding area on the strength and stress distribution of dissimilar single-lap joints
Yousefi Kanani, A., Hou, X. & Ye, J., 1/06/2020, In: Composite Structures. 241, 10 p., 112136.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fracture mechanisms of hybrid adhesive bonded joints: effects of the stiffness of constituents
Yousefi Kanani, A., Liu, Y., J.Hughes, D., Ye, J. & Hou, X., 1/10/2020, In: International Journal of Adhesion and Adhesives . 102, 102649.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A novel dissimilar single-lap joint with interfacial stiffness improvement
Yousefi Kanani, A., Hou, X. & Ye, J., 15/11/2020, In: Composite Structures. 252, 11 p., 112741.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The effect of joint configuration on the strength and stress distributions of dissimilar adhesively bonded joints
Yousefi Kanani, A., Hou, X. & Ye, J., 1/01/2021, In: Engineering Structures. 11 p., 111322.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Hybrid and adhesively bonded joints with dissimilar adherends: a critical review
Yousefi Kanani, A., Green, S., Hou, X. & Ye, J., 30/09/2021, In: Journal of Adhesion Science and Technology. 35, 17, p. 1821-1859 39 p.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
A novel configuration of a double lap adhesive joint with reduced stress concentrations
Yousefi Kanani, A., Hou, X. & Ye, J., 7/09/2017, 20th International Conference on Composite Structures - ICCS 20. Tornabene, F. (ed.). Bologna, Italy: Societa Editrice Esculapio
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A multi-scale model for studying failure mechanisms of composite wind turbine blades
Ye, J., Chu, C., Cai, H., Hou, X., Shi, B., Tian, S., Chen, X. & Ye, J., 15/03/2019, In: Composite Structures. 212, p. 220-229 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Local bridging effect of fractured laminated glass with EVA based hybrid interlayers under weathering actions
Yang, J., Wang, Y., Wang, X. E., Hou, X., Zhao, C. & Ye, J., 3/01/2022, In: Construction and Building Materials. 314, B, 13 p., 125595.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Sensitivity Studies on Offshore Submarine Hoses on CALM Buoy with Comparisons for Chinese‑Lantern and Lazy‑S Configuration: OMAE2019‑96755
Wang, F., Amaechi, C. V., Hou, X. & Ye, J., 10/06/2019.
Research output: Contribution to conference - Without ISBN/ISSN › Other › peer-review
Published
Experimental and analytical study on the pre-crack impact response of thick multi-layered laminated glass under hard body impact
Wang, X.-E., Huang, X.-H., Yang, J., Hou, X., Zhu, Y. & Xie, D., 15/09/2021, In: International Journal of Mechanical Sciences. 206, 20 p., 106613.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Estimating microscale DE parameters of brittle adhesive joints using genetic expression programming
Wang, X.-E., Kanani, A. Y., Gu, Z., Yang, J., Ye, J. & Hou, X., 31/10/2022, In: International Journal of Adhesion and Adhesives. 118, 12 p., 103230.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A novel genetic expression programming assisted calibration strategy for discrete element models of composite joints with ductile adhesives
Wang, X.-E., Kanani, A. Y., Pang, K., Yang, J., Ye, J. & Hou, X., 30/11/2022, In: Thin-Walled Structures. 180, 18 p., 109985.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Particle-based micromechanical modelling of adhesive joint considering microscale surface roughness
Wang, X.-E., Hou, X., Ye, J., Pang, K. & Yang, J., 21/07/2022.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Insights into the micromechanical response of adhesive joint with stochastic surface micro-roughness
Wang, X.-E., Pang, K., Huang, X., Yang, J., Ye, J. & Hou, X., 31/01/2023, In: Engineering Fracture Mechanics. 277, 19 p., 108954 .
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Investigation on the transitional micromechanical response of hybrid composite adhesive joints by a novel adaptive DEM model
Wang, X.-E., Yousefi Kanani, A., Gu, Z., Yang, J., Ye, J. & Hou, X., 30/04/2023, In: Theoretical and Applied Fracture Mechanics. 124, 15 p., 103760.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microscale Discrete Element Model for Simulating Bridging Behavior of Fractured Glass Laminates
Wang, X. E., Yang, J., Peng, S., Wang, Y. & Hou, X., 20/06/2022, Challenging Glass Conference Proceedings. Belis, J., Bos, F. & Louter, C. (eds.). Vol. 8. 12 p. (Challenging Glass Conference Proceedings; vol. 8).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Design optimisation of braided composite beams for lightweight rail structures using machine learning methods
Singh, A., Gu, Z., Hou, X., Liu, Y. & Hughes, D. J., 15/02/2022, In: Composite Structures. 282, 12 p., 115107.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental and numerical investigation into the hybrid joint performance considering microstructural roughness
Pang, K., Wang, X.-E., Ye, J. & Hou, X., 3/11/2022.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
E-pub ahead of print
Effect of microstructural roughness on the performance and fracture mechanism of multi-type single lap joints
Pang, K., Wang, X.-E., Ye, J., Carnegie, C. & Hou, X., 30/11/2024, In: Composites Part B: Engineering. 286, 111763.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Understanding mixed mode ratio of adhesively bonded joints using genetic programming (GP)
Liu, Y., Gu, Z., Hughes, D. J., Ye, J. & Hou, X., 15/02/2021, In: Composite Structures. 258, 10 p., 113389.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Joining Technologies for Aluminium Castings—A Review
Li, D., Slater, C., Cai, H., Hou, X., Li, Y. & Wang, Q., 19/05/2023, In: Coatings. 13, 5, 958.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Analysis of failure mechanisms of adhesive joints modified by a novel additive manufacturing-assisted method
Kanani, A. Y., Wang, X. E., Hou, X., Rennie, A. E. W. & Ye, J., 15/02/2023, In: Engineering Structures. 277, 9 p., 115428.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Metamaterials with negative Poisson’s ratio: a review of mechanical propterties and deformation mechanisms
Hou, X. & Silberschmidt, V., 10/04/2015, Mechanics of Advanced Materials: Analysis of Properties and Performance. Silberschmidt, V. V. & Matveenko, V. P. (eds.). Springer International Publishing, p. 155-179 25 p. (Engineering Materials).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A novel 3D composite structure with tunable Poisson's ratio and stiffness
Hou, X. & Hu, H., 07/2015, In: physica status solidi (b). 252, 7, p. 1565–1574 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tailoring structure of inclusion with strain-induced closure to reduce Poisson's ratio of composite materials
Hou, X., Hu, H. & Silberschmidt, V., 2014, In: Journal of Applied Physics. 115, 8 p., 224903.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Numerical analysis of composite structure with in-plane isotropic negative Poisson’s ratio: effects of materials properties and geometry features of inclusions
Hou, X., Hu, H. & Silberschmidt, V., 03/2014, In: Composites Part B: Engineering. 58, p. 152–159 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Erratum to: A composite material with Poisson’s ratio tunable from positive to negative values: an experimental and numerical study
Hou, X., Hu, H. & Silberschmidt, V., 01/2014, In: Journal of Materials Science. 49, 1, p. 461 1 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A novel concept to develop composite structures with isotropic negative Poisson's ratio: effects of random inclusions
Hou, X., Hu, H. & Silberschmidt, V., 12/10/2012, In: Composites Science and Technology. 72, 15, p. 1848–1854 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A study of computational mechanics of 3D spacer fabric: factors affecting its compression deformation
Hou, X., Hu, H. & Silberschmidt, V., 05/2012, In: Journal of Materials Science. 47, 9, p. 3989–3999 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Non-uniformity of deformation in low-density thermally point bonded non-woven material: effect of microstructure
Hou, X., Acar, M. & Silberschmidt, V., 01/2011, In: Journal of Materials Science. 46, 2, p. 307–315 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Finite element simulation of low-density thermally bonded nonwoven materials: effects of orientation distribution function and arrangement of bond points
Hou, X., Acar, M. & Silberschmidt, V., 02/2011, In: Computational Materials Science. 50, 4, p. 1292–1298 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Nonlinear compression behavior of warp-knitted spacer fabric: effect of sandwich structure
Hou, X., Hu, H., Liu, Y. & Silberschmidt, V., 2011, In: Computers, Materials & Continua. 23, 2, p. 119-134 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
2D finite element analysis of thermally bonded nonwoven materials: continuous and discontinuous models
Hou, X., Acar, M. & Silberschmidt, V., 09/2009, In: Computational Materials Science. 46, 3, p. 700–707 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tensile behaviour of low density thermally bonded nonwoven material
Hou, X., Acar, M. & Silberschmidt, V., 2009, In: Journal of Engineered Fibres and Fabrics . 4, 1, p. 26-33 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A composite material with Poisson’s ratio tunable from positive to negative values: an experimental and numerical study
Hou, X., Hu, H. & Silberschmidt, V., 12/2013, In: Journal of Materials Science. 48, 24, p. 8493-8500 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Double lap adhesive joint with reduced stress concentration: effect of slot
Hou, X., Yousefi Kanani, A. & Ye, J., 15/10/2018, In: Composite Structures. 202, p. 635-642 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tensile behavior of low density thermally bonded nonwoven material
Hou, X., Acar, M. & Silberschmidt, V. V., 20/04/2009, In: Journal of Engineered Fibers and Fabrics. 4, 1, p. 26-33 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Non-linear finite element model for dynamic analysis of high-speed valve train and coil collisions
Gu, Z., Hou, X., Keating, E. & Ye, J., 1/05/2020, In: International Journal of Mechanical Sciences. 173, 10 p., 105476.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Design and analysis method of nonlinear helical springs using a combining technique: Finite element analysis, constrained Latin hypercube sampling and genetic programming
Gu, Z., Hou, X. & Ye, J., 1/11/2021, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 235, 22, p. 5917-5930 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A parametric study of adhesive bonded joints with composite material using black-box and grey-box machine learning methods: Deep neuron networks and genetic programming
Gu, Z., Liu, Y., J.Hughes, D., Ye, J. & Hou, X., 15/07/2021, In: Composites Part B: Engineering. 217, 11 p., 108894.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Advanced static and dynamic analysis method for helical springs of non-linear geometries
Gu, Z., Hou, X. & Ye, J., 24/11/2021, In: Journal of Sound and Vibration. 513, 18 p., 116414.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Novel Self‐Updating Design Method for Complex 3D Structures Using Combined Convolutional Neuron and Deep Convolutional Generative Adversarial Networks
Gu, Z., Hou, X., Saafi, M. & Ye, J., 30/06/2022, In: Advanced Intelligent Systems. 4, 6, 10 p., 2100186.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A genetic evolved machine learning approach for 3D DEM modelling of anisotropic materials with full consideration of particulate interactions
Gu, Z., Ding, X., Hou, X. & Ye, J., 1/02/2023, In: Composites Part B: Engineering. 250, 11 p., 110432.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Mechanical properties of a multi-material flexible adhesive joint
Gendre, L., Hou, X. & Ridler, T., 15/09/2016, SAMPE Europe Conference 16 Liege. SAMPE Europe, p. 225-235 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Modelling Composite Failure through Machine Learning
Ding, X., Hou, X., Xia, M., Ismail, Y. & Ye, J., 1/09/2020.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Predictions of macroscopic mechanical properties and microscopic cracks of unidirectional fibre-reinforced polymer composites using deep neural network (DNN)
Ding, X., Hou, X., Xia, M., Ismail, Y. & Ye, J., 15/12/2022, In: Composite Structures. 302, 13 p., 116248.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effects of defects on the transverse mechanical response of unidirectional fibre-reinforced polymers: DEM simulation and deep learning prediction
Ding, X., Gu, Z., Hou, X., Xia, M., Ismail, Y. & Ye, J., 1/10/2023, In: Composite Structures. 321, 117301.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Numerical modelling of thermally bonded nonwovens: continuous and discontinuous approaches
Demirci, E., Hou, X., Acar, M., Pourdeyhimi, B. & Silberschmidt, V., 05/2012, In: Solid State Phenomena. 188, p. 164-169 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 Next

Research

Dr Xiaonan Hou

Quick Links

Connect With Us