Home > Research > Publications & Outputs >

Research

« Back

Find by keywords:

Engineering

151 - 200 out of 704Page size: 50
  1. Published

    Buckling behaviour of concrete- filled elliptical steel columns

    Lam, D., Dai, X., Jamaluddin, N. & Ye, J., 2011, 7th International Conference on Steel & Aluminium Structures (ICSAS2011), Kuching, Sarawak, Malaysia. Ho, L. H. (ed.).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  2. Published

    Crystallographic engineering of oxide semiconductors for transistors and microelectronics applications

    Thomas, S., Adamopoulos, G., Bashir, A., Bradley, D. & Anthopoulos, T., 2011, Materials Research Society.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  3. Published

    Depth profiling with Principle component Analysis in a variety of contrasting media

    Adams, J., Joyce, M. & Mellor, M., 2011. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  4. Published

    Digital approaches to neutron-gamma imaging with a narrow tungsten collimator aperture and a fast organic liquid scintillator

    Akurugoda Gamage, K., Joyce, M. & Taylor, G., 2011. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  5. Published

    Editors' perspectives: road vehicle suspension design, dynamics, and control

    Cao, D., Song, X. & Ahmadian, M., 2011, In: Vehicle System Dynamics. 49, 1-2, p. 3-28 26 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    Effects of Shear Connector's Position in Profiled Sheeting on Strength and Ductility.

    Lam, D., Qureshi, J. & Ye, J., 2011, 5th International Conference on Steel & Composite Structures, Seoul, Korea..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  7. Published

    Extension of the Linear Depth Attenuation Method for the Radioactivity Depth Analysis Tool (RADPAT)

    Shippen, A. & Joyce, M., 2011, In: IEEE Transactions on Nuclear Science. 58, 3, p. 1145-1150 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    Finite Element Modelling of Slender Concrete Filled Elliptical Steel Columns

    Lam, D., Dai, X., Ye, J. & Jamaluddin, N., 2011, EUROSTEEL 2011, Budapest, Hungary. .

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  9. Published

    Hybrid Phototransistors-based on Dye-functionalised ZnO Semiconducting Channels

    Pattanasattayavong, P., Thomas, S., Adamopoulos, G., Labram, J. & Anthopoulos, T., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  10. Published

    Laser metal deposition of steel components using machining waste as build material

    Mahmood, K., Khan, A. & Pinkerton, A. J., 2011, Proceedings of CLEO, the IEEE Conference on Lasers and Electro-Optics. New York: IEEE, p. - 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  11. Published

    Laser surface cladding of Inconel 617 chips on mild steel

    Mahmood, K., Pinkerton, A. J. & Syed, W. U. H., 2011, Proceedings of the 25th International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  12. Published

    Lessons learnt from recent nuclear build projects

    Garnsey, R., Nickson, I. & Joyce, M., 2011, In: Proceedings of the ICE - Energy. 164, 2, p. 57-70 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  13. Published

    Li-Doped Zinc oxide Transistors and circuits fabricated by spray deposition in ambient atmosphere.

    Adamopoulos, G., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  14. Published

    Liquid scintillator neutron detection for real-time nuclear material assay

    Lavietes, A., Pickrell, M., Plentada, R., Mascarenhas, M., Liguori, C., Aspinall, M. & Joyce, M., 2011. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  15. Published

    Material-efficient laser cladding for corrosion resistance

    Mahmood, K., Stevens, N., Syed, W. U. H. & Pinkerton, A. J., 2011, Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 695-704 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  16. Published

    Modelling generalisation and power dissipation of flexible-wheel suspension concept for planetary surface vehicles

    Cao, D., Khajepour, A. & Song, X., 2011, In: Vehicle System Dynamics. 49, 8, p. 1299-1320 22 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. Published

    Multi-scale modelling of damage progression in FRC laminates - Applications of DEM

    Yang, D., Sheng, Y., Ye, J. & Tan, Y., 2011, Particle-Based Methods II: Fundamentals and Applications. Onate, E. & Owen, D. R. J. (eds.). Barcelona: International Center for Numerical Methods in Engineering (CIMNE), p. 256-263 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  18. Published

    Numerical Modelling of Damage Progression in Single-fiber Composite under Axial Tension

    Yang, D., Sheng, Y., Ye, J., Tan, Y. & Jiang, S., 2011, In: Advanced Materials Research. 268-270, p. 280-285 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    Prediction of multipactor in the iris region of rf deflecting mode cavities

    Burt, G. & Dexter, A., 2011, In: Physical Review Special Topics: Accelerators and Beams. 14, 12, 11 p., 122002.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    Product Optimization by Rapid Manufacturing and Targeted Functional Analysis

    Lupeanu, M., Rennie, A., Neagu, C. & Celik, K., 2011, 16th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 14 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  21. Published

    Proportional-integral-plus control of robotic excavator arm utilising state-dependent parameter model

    Gu, J., Feng, Z.-H., Ma, X. & Ni, J.-F., 2011, In: Applied Mechanics and Materials. 48-49, p. 1323-1327 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    Realistic Modeling of High Rise Structures subjected to Progressive Collapse

    Stephen, D., Ye, J. & Lam, D., 2011, The Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, Crete, Greece..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  23. Published

    Real-time digital imaging of neutrons and gamma rays with a fast liquid scintillator detector

    Gamage, K. & Joyce, M., 2011. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Speech

  24. Published

    Real-time digital pulse-shape discrimination in non-hazardous fast liquid scintillation detectors: prospects for safety and security

    Joyce, M. & Aspinall, M., 2011. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  25. Published

    Selective laser melting for near net-shape manufacturing: Investigation into structure-parameter relationships and phase determination by X-ray diffraction in stainless steel alloy systems

    Green, S., OMeara, N. & Rennie, A., 2011. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  26. Published

    Simulation guided design of a cryogenic probe for micrometer-scale in vivo MR imaging

    Hu, B., Glover, P. & Benson, T., 2011, Computational Problem-Solving (ICCP), 2011 International Conference on. IEEE, p. 647-651 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  27. Published

    Special issue on advanced vehicle handling dynamics and control

    Cao, D., Rakheja, S. & Yang, X., 2011, In: International Journal of Vehicle Design. 56, 1-4, p. 1-3 3 p.

    Research output: Contribution to Journal/Magazine › Editorial

  28. Published

    Spray Deposited Lithium-doped Zinc Oxide Thin-film Transistors with Electron Mobility Exceeding 50 cm2/Vs

    Adamopoulos, G., Bradley, D. & Anthopoulos, T., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  29. Published

    State dependent feed-forward control for wave energy conversion

    Cross, P., Taylor, J. & Aggidis, G., 2011, 9th European Wave and Tidal Energy Conference. EWTEC

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  30. Published

    The design and calibration of a phantom for depth profiling measurements of entrained radioactivity in silica-based media

    Shippen, A. & Joyce, M., 2011, In: Nuclear Engineering and Design. 241, 2, p. 526-532 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    The determination of the depth of localised radioactive contamination by 137Cs and 60Co in sand with principal component analysis

    Adams, J., Mellor, M. & Joyce, M., 2011, In: Environmental Science and Technology. 45, 19, p. 8262-8267 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    Urban bus driver ride and road-friendliness. Part I: model development and role of operating parameters

    Rakheja, S., Cao, D. & Wang, Z., 2011, In: International Journal of Vehicle Design. 57, 4, p. 305-332 28 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Published

    Urban bus driver ride and road-friendliness. Part II: subjective suspension damping tuning and objective optimization

    Cao, D., Rakheja, S. & Wang, Z., 2011, In: International Journal of Vehicle Design. 57, 4, p. 333-358 26 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  34. Published

    Subwavelength vortical plasmonic lattice solitons

    Ye, F., Mihalache, D., Hu, B. & Panoiu, N. C., 16/12/2010, In: Optics Letters. 36, 7, p. 1179-1181 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  35. Published

    Photocatalytic initiation of electroless deposition

    Bromley, M. A., Boxall, C., Galea, S., Goodall, P. S. & Woodbury, S., 15/12/2010, In: Journal of Photochemistry and Photobiology A: Chemistry. 216, 2-3, p. 228-237 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    The costs of small-scale hydro power production: Impact on the development of existing potential.

    Aggidis, G. A., Luchinskaya, E., Rothschild, R. & Howard, D. C., 12/2010, In: Renewable Energy. 35, 12, p. 2632-2638 7 p., 35 .

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    Microstructure effects on transverse cracking in composite laminae by DEM

    Sheng, Y., Yang, D., Tan, Y. & Ye, J., 30/11/2010, In: Composites Science and Technology. 70, 14, p. 2093-2101 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Published

    Modal analysis of agricultural machineries using finite element method: a case study for a V-belt pulley of a fodder crushing machine

    Celik, H. K., Topakci, M., Canakci, M., Rennie, A. & Akinci, I., 12/11/2010, In: Journal of Food, Agriculture and Environment. 8, 3-4, p. 439-446 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  39. Published

    Improvements in and relating to gamma ray and neutron detection.

    Gamage, K. (Inventor) & Joyce, M. J. (Inventor), 11/11/2010, Patent No. GB1016806.0

    Research output: Patent

  40. Published

    Spray-Deposited Li-Doped ZnO Transistors with Electron Mobility Exceeding 50 cm(2)/Vs

    Adamopoulos, G., Bashir, A., Thomas, S., Gillin, W. P., Georgakopoulos, S., Shkunov, M., Baklar, M. A., Stingelin, N., Maher, R. C., Cohen, L. F., Bradley, D. D. C. & Anthopoulos, T. D., 9/11/2010, In: Advanced Materials. 22, 42, p. 4764-4769 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  41. Published

    Double-Corrugated Rectangular Waveguide Slow-Wave Structure for Terahertz Vacuum Devices

    Mineo, M. & Paoloni, C., 11/2010, In: IEEE Transactions on Electron Devices. 57, 11, p. 3169-3175 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  42. Published

    Heterogeneous photocatalysed degradation of an insecticide derivative acetamiprid in aqueous suspensions of semiconductor

    Khan, A., Haque, M. M., Mir, N. A., Muneer, M. & Boxall, C., 15/10/2010, In: Desalination. 261, 1-2, p. 169-174 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Published

    Cascaded distributed power amplifier with non-identical transistors and inter-stage tapered impedance

    Narendra, K., Limiti, E., Paoloni, C., Collantes, J.-M. & Jansen, R. H., 1/09/2010, Microwave Conference (EuMC), 2010 European. IEEE, p. 990 -993 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  44. Published

    Digital approaches to field neutron spectrometry-NPL Report IR 23.

    Akurugoda Gamage, K. A., Hawkes, N. & Taylor, G., 09/2010, National Physical Laboratory.

    Research output: Working paper

  45. Published

    Structural optimisation of a subsoiler

    Topakci, M., Celik, H. K., Canakci, M., Karayel, D. & Rennie, A., 09/2010, In: Pakistan Journal of Scientific and Industrial Research. 53, 5, p. 281-287 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  46. Published

    Air-Stable Solution-Processed Hybrid Transistors with Hole and Electron Mobilities Exceeding 2 cm(2) V-1 s(-1)

    Smith, J., Bashir, A., Adamopoulos, G., Anthony, J. E., Bradley, D. D. C., Hamilton, R., Heeney, M., McCulloch, I. & Anthopoulos, T. D., 24/08/2010, In: Advanced Materials. 22, 32, p. 3598-3602 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  47. Published

    Finite element modelling of shear connection behaviour in a push test using profiled sheeting

    Qureshi, J., Lam, D. & Ye, J., 16/08/2010, Advances and Trends in Structural Engineering, Mechanics and Computation - Proceedings of the 4th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2010. CRC Press/Balkema, p. 679-682 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  48. Published

    Vectorially combined distributed power amplifier with load pull impedance determination

    Narendra, K., Limiti, E., Paoloni, C., Collantes, J. M., Jansen, R. H. & Yarman, B. S., 5/08/2010, In: Electronics Letters. 46, 16, p. 1137-1138 2 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  49. Published

    Discrete element modeling of the microbond test of fiber reinforced composite

    Yang, D., Sheng, Y., Ye, J. & Tan, Y., 08/2010, In: Computational Materials Science. 49, 2, p. 253-259 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  50. Published

    The Fender Stratocaster electric guitar: a case study for both non-transferable and transferable skills learning in a generalist electronic engineering cohort

    Joyce, M., 08/2010, In: IEEE Transactions on Education. 53, 3, p. 397-404 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 3 4 5 6 7 8 ...15 Next

Back to top