Home > Research > Publications & Outputs >

Research

« Back

Find by keywords:

Engineering

1 - 100 out of 704Page size: 100
  1. Published

    Sampling frequency for water quality variables in streams: systems analysis to quantify minimum monitoring rates

    Chappell, N. A., Jones, T. D. & Tych, W., 15/10/2017, In: Water Research. 123, p. 49-57 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  2. Published

    Kineto-dynamic directional response analysis of an articulated frame steer vehicle

    Pazooki, A., Rakheja, S. & Cao, D., 2014, In: International Journal of Vehicle Design. 65, 1, p. 1-30 30 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  3. Published

    Product re-design using advanced engineering applications and function analysis: a case study for greenhouse clips

    Celik, K., Lupeanu, M., Rennie, A., Neagu, C. & Akinci, I., 10/2013, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 35, 3, p. 305-318 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    Be-doped ZnO thin-film transistors and circuits fabricated by spray pyrolysis in air

    Thomas, S., Adamopoulos, G. & Anthopoulos, T., 09/2013, In: Journal of Display Technology. 9, 9, p. 688-693 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  5. Published

    Development of an Engineering Design Academy: Increasing the commercial exposure of undergraduate students

    Lambert, C. & Rennie, A., 09/2013, Proceedings of The 30th International Manufacturing Conference: Professional Development of Engineers for Advanced Manufacturing. Dublin, Ireland, p. 473-482 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  6. Published

    Pt dissolution and deposition in high concentration aqueous tri-Iodide/iodide solutions

    Dawson, R. & Kelsall, G., 17/08/2013, In: ECS Electrochemistry Letters. 2, 11, p. D55-D57 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Multipole components and their minimization in deflecting cavities with standard type couplers

    Ambattu, P., Burt, G., Grudiev, A., Dolgashev, V. & Dexter, A., 4/06/2013, In: Physical Review Special Topics: Accelerators and Beams. 16, 6, 14 p., 062001.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    A new design concept for milling tools of spherical surfaces obtained by kinematic generation

    Neagu, C., Lupeanu, M. & Rennie, A., 1/05/2013, In: Applied Mathematical Modelling. 37, 9, p. 6119-6134 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    A unified formulation for circle and polygon concrete-filled steel tube columns under axial compression

    Yu, M., Zha, X., Ye, J. & Li, Y., 04/2013, In: Engineering Structures. 49, p. 1-10 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  10. Published

    Constrained optimization of the shape of a wave energy collector by genetic algorithm

    McCabe, A., 03/2013, In: Renewable Energy. 51, n/a, p. 274-284 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. Published

    Prediction of failure envelopes and stress strain curves of fiber composite laminates under triaxial loads: comparison with experimental results

    Zhang, D., Xu, L. & Ye, J., 03/2013, In: Journal of Composite Materials. 47, 6-7, p. 763-776 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  12. Published

    An anisotropic enhanced thermal conductivity approach for modelling laser melt pools for Ni-base super alloys

    Safdar, S., Pinkerton, A. J., Li, L., Sheikh, M. & Withers, P., 1/02/2013, In: Applied Mathematical Modelling. 37, 3, p. 1187-1195 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  13. Published

    Microscopic modelling of the hydraulic fracturing process

    Eshiet, K., Sheng, Y. & Ye, J., 02/2013, In: Environmental Earth Sciences. 68, 4, p. 1169-1186 18 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    Experimental and analytical study on factors influencing biomimetic undulating fin propulsion performance based on orthogonal experimental design

    Wang, G., Ma, X., Hua, T. & Zhang, D., 2013, In: Advanced Robotics. 27, 8, p. 597-609 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    Research on deploying technical functional analysis for additive manufacturing of a surgical device for intravitreal interventions

    Lupeanu, M., Brooks, H., Rennie, A. & Hill, D., 2013, In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 75, 1, p. 141-160 20 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    Improved Corrugation Cross-Sectional Shape in Terahertz Double Corrugated Waveguide

    Mineo, M. & Paoloni, C., 11/2012, In: IEEE Transactions on Electron Devices. 59, 11, p. 3116 -3119 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. Published

    Functional analysis for the development of bio-medical products

    Lupeanu, M., Neagu, C., Opran, C. & Rennie, A., 10/2012, p. 330-336. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  18. Published

    Vectorially Combined Distributed Power Amplifiers for Software-Defined Radio Applications

    Narendra, K., Limiti, E., Paoloni, C., Collantes, J.-M., Jansen, R. & Yarman, S., 10/2012, In: IEEE Transactions on Microwave Theory and Techniques. 60, 10, p. 3189-3200 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    Vacuum tube amplifier of the opther Project for 1-THz amplification

    Di Carlo, A., Mineo, M., Paoloni, C., Durand, A. J., Krozer, V., Kotiranta, M., Bouamrane, F., Bouvet, T. & Megtert, S., 1/09/2012, Plasma Science (ICOPS), 2012 Abstracts IEEE International Conference on. IEEE, p. 7B-2 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  20. Published
    No renderer
  21. Published

    Accurate Backward-Wave Interaction Impedance Computation for Corrugated Rectangular Waveguides

    Paoloni, C., 09/2012, 5th UK/Europe-China Workshop on Millimeter Waves and Terahertz Technologies. China

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  22. Published

    Heterogeneous photocatalyzed degradation of a pesticide derivative, 3-chloro-4-methoxyaniline, in aqueous suspensions of titania

    Khan, A., Mir, N. A., Haque, M. M., Muneer, M., Vijayalakshmi, S. & Boxall, C., 09/2012, In: Research on Chemical Intermediates. 38, 7, p. 1323-1333 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  23. Published

    Investigations of the state-of-the-art methods for electromagnetic NDT and electrical condition monitoring

    Ma, X., 09/2012, In: Insight – Non-Destructive Testing and Condition Monitoring. 54, 9, p. 482-488 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    Laser clad corrosion protection for mild and harsh environments

    Mahmood, K., Stevens, N. & Pinkerton, A. J., 09/2012, In: Surface Engineering. 28, 8, p. 576-584 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    Narrow corrugated waveguide BWO for THz signal generation

    Mineo, M. & Paoloni, C., 09/2012, Plasma Science (ICOPS), 2012 Abstracts IEEE International Conference on. IEEE, p. 3P-2 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  26. Published

    Optimal sensor selection for wind turbine condition monitoring using multivariate principal component analysis approach

    Wang, Y., Ma, X. & Joyce, M., 09/2012. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  27. Published

    Photocatalytically Initiated Electroless Deposition of macroporous metal films onto insulating substrates

    Bromley, M. & Boxall, C., 09/2012, In: Electrochemistry Communications. 23, p. 87-89 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  28. Published

    Prediction of failure envelopes and stress–strain curves of fiber composite laminates under triaxial loads

    Ye, J. & Zhang, D., 09/2012, In: Journal of Composite Materials. 46, 19-20, p. 2417-2430 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Fuel cells

    Sutherland, H. (Inventor), Lewis, G. (Inventor), Reynolds, C. (Inventor) & Dawson, R. (Inventor), 9/08/2012, Patent No. WO2012104599 (A1)

    Research output: Patent

  30. Published

    A comparison of collimator geometries for imaging mixed radiation fields with fast liquid organic scintillators

    Gamage, K., Joyce, M. & Taylor, G., 08/2012, In: IEEE Transactions on Nuclear Science. 59, 4, p. 1432-1437 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    Evolution of a neutron detector for the purpose of portability and resolvability

    Selwood, M. & Monk, S., 11/07/2012, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 680, p. 18-26 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    A digital approach to neutron-gamma imaging with a narrow tungsten collimator aperture and a fast organic liquid scintillator detector

    Gamage, K., Joyce, M. & Taylor, G., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1223-1227 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Published

    Depth profiling 137Cs and 60Co non-intrusively for a suite of industrial shielding materials and at depths beyond 50mm

    Adams, J., Joyce, M. & Mellor, M., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1150–1153 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  34. Published

    Design for Manufacture using Functional Analysis and CAD Mould Simulation for Rapid Prototyping and Rapid Tooling: Paper: ESDA2012-82410

    Lupeanu, M., Brooks, H., Rennie, A., Celik, K., Neagu, C. & Akinci, I., 07/2012, ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2012): Proceedings of the . Nantes: American Society of Mechanical Engineers (ASME), 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  35. Published

    Development of a portable isotropic neutron spectrometer

    Selwood, M. J. & Monk, S. D., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1145-1149 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    Development of fusion blanket technology for the DEMO reactor

    Colling, B. R. & Monk, S. D., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1370-1372 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    Generic model of a community-based microgrid integrating wind turbines and photovoltaics

    Ma, X., Qin, J. & Wang, Y., 07/2012, p. 3147-3153. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  38. Published

    Non-Linear Stress Analysis for the Bolt Connections of A Chisel Tine Using Finite Element Method

    Celik, K., Rennie, A. & Akinci, I., 07/2012, International Conference of Agricultural Engineering (CIGR-AgEng 2012): Proceedings of the . 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  39. Published

    Proposal to characterise legacy Sellafield ponds using SONAR and RadLine™

    Jackson, S., Monk, S., Nye, D., Colling, B. & Stanley, S., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1162-1165 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    Variation in measured neutron fluence in low radiation environments when altering sensor density on the surface of a sphere

    Monk, S. D., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1288-1290 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  41. Published

    Function Based Design for Rapid Prototyping: A Medical Industry Application for an Ocular Speculum

    Lupeanu, M., Brooks, H., Rennie, A., Hill, D. & Neagu, C., 06/2012, 13th Rapid Design, Prototyping & Manufacturing Conference: Proceedings of the . Bocking, C. & Rennie, A. (eds.). High Wycombe: CRDM Ltd, p. 45-53 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  42. Published

    Laser surface modification using Inconel 617 machining swarf as coating material

    Mahmood, K., Stevens, N. & Pinkerton, A. J., 06/2012, In: Journal of Materials Processing Technology. 212, 6, p. 1271-1280 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Published

    Rapid Design, Prototyping and Manufacturing: Proceedings of the Thirteenth Conference on

    Bocking, C. E. (Editor) & Rennie, A. (Editor), 06/2012, High Wycombe: CRDM Ltd. 109 p.

    Research output: Book/Report/Proceedings › Proceedings

  44. Published

    Stress analysis of a sample marine crane’s boom under static loading condition

    Celik, K., Caglayan, N., Cinar, R., Ucar, M., Ersoy, H. & Rennie, A., 06/2012, 5th International Mechanical Engineering Forum 2012: Proceedings of the . Prague, Czech Republic, p. 246-256 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  45. Published

    A remote condition monitoring system for wind-turbine based DG systems

    Ma, X., Wang, G., Cross, P. & Zhang, X., 31/05/2012, In: Journal of Physics: Conference Series. 364, 1, 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  46. Published

    Dynamic response of metallic sandwich panles under blast loadings.

    Wang, H., Zha, X. & Ye, J., 05/2012, In: International Journal of Structural Stability and Dynamics. 12, 3, p. - 23 p., 1250017.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  47. Published

    Progetto OPTHER: OPtically Driven Terahertz Amplifiers

    Paoloni, C. & Di Carlo, A., 05/2012, Fotonica 2012: Photonics 2012. Italy

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  48. Published

    THz amplifier based on miniaturized vacuum tube FP7 OPTHER

    Paoloni, C. & Di Carlo, A., 05/2012. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  49. Published

    Method for formation of porous metal coatings

    Bromley, M. (Inventor) & Boxall, C. (Inventor), 5/04/2012, IPC No. C23C 18/18, Patent No. WO/2012/042203

    Research output: Patent

  50. Published

    1-THz Cascade Backward Wave Amplifier

    Paoloni, C., Mineo, M., Di Carlo, A., Durand, A. J., Krozer, V., Kotiranta, M., Bouamrane, F., Bouvet, T. & Megtert, S., 1/04/2012, Vacuum Electronics Conference (IVEC), 2012 IEEE Thirteenth International . IEEE, p. 237-238 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  51. Published

    A BIOMECHANICAL COMPARISON OF DIFFERENT SCREW CONFIGURATIONS IN DISTAL TIBIAL LOCKING PLATES

    Bonner, T. J., Green, S. M. & McMurty, I. A., 1/04/2012, In: Journal of Bone and Joint Surgery, British Volume. 94-B, SUPP XXXV, p. 20 1 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  52. Published

    Backward wave mode interaction impedance at THz frequencies for corrugated waveguide

    Mineo, M. & Paoloni, C., 04/2012, In: Microwave and Optical Technology Letters. 54, 4, p. 837-839 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  53. Published

    Design procedure for THz cascade backward wave amplifiers

    Mineo, M., Paoloni, C. & Durand, A. J., 04/2012, Vacuum Electronics Conference (IVEC), 2012 IEEE Thirteenth International. USA: IEEE, p. 235-236 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  54. Published

    Micro Reentrant Cavity for 100GHz Klystron

    Mineo, M. & Paoloni, C., 04/2012, Vacuum Electronics Conference (IVEC), 2012 IEEE Thirteenth International. IEEE, p. 65-66 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  55. Published

    Modelling and validation of off-road vehicle ride dynamics

    Pazooki, A., Rakheja, S. & Cao, D., 04/2012, In: Mechanical Systems and Signal Processing. 28, p. 679-695 17 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  56. Published

    The nanoporous metallisation of insulating substrates through Photocatalytically Initiated Electroless Deposition (PIED)

    Bromley, M. & Boxall, C., 22/03/2012, In: MRS Online Proceedings Library. 1409, 6 p., mrsf11-1409-cc05-20.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  57. Published

    Photon radiation testing of commercially available off-the-shelf microcontroller devices

    Bandala, M. & Joyce, M., 10/03/2012, In: IEICE Electronics Express. 9, 5, p. 397-402 6 p.

    Research output: Contribution to Journal/Magazine › Letter › peer-review

  58. Published

    Phase space analysis of multipactor saturation in rectangular waveguide

    Lingwood, C., Burt, G., Dexter, A., Goudket, P., Smith, J. & Stoltz, P., 9/03/2012, In: Physics of Plasmas. 19, 3, 9 p., 032106.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  59. Published

    Novel early warning fault detection for wind-turbine-based DG systems

    Ma, X., 5/03/2012, Proceedings of 2011 2nd IEEE PES International Conference and Exhibition on Innovative Smart Grid Technologies (ISGT Europe): 5-7 Dec. 2011, Manchester, UK. IEEE, p. 1-6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  60. Published

    Numerical simulation of hydrogen impinging jet flame using flamelet generated manifold reduction

    Dinesh, K. K. J. R., Jiang, X. & van Oijen, J. A., 03/2012, In: International Journal of Hydrogen Energy. 37, 5, p. 4502-4515 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  61. Published

    Physical Analysis of Maximum Strength of Additive Manufactured Parts: A Case-Based Study

    Hambali, R. H., Rennie, A. & McGovern, J., 03/2012, 2nd International Conference on Arts, Social Sciences & Technology: Proceedings of the . Penang, Malaysia, 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  62. Published

    Semiconductor photocatalysis and metal deposition

    Bromley, M. & Boxall, C., 03/2012, Advances in Chemistry Research. Taylor, J. C. (ed.). Nova Science Publishers, Vol. 13.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  63. Published

    Comparison of cement pressurisation in flanged and unflanged acetabular cups

    Bhattacharya, R., Attar, F. G., Green, S. & Port, A., 3/02/2012, In: Journal of Orthopaedic Surgery and Research. 7, 1, 5 p., 5.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  64. Published

    Optimisation of Build Orientation for FDM Additive Manufactured Products

    Hambali, R. H., Vaudelin, M. & Rennie, A., 02/2012, International Conference on Applications and Design in Mechanical Engineering (ICADME 2012): Proceedings of the . Perlis, Malaysia: School of Mechatronic Engineering, UniMAP, 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  65. Published

    A Novel Receive-Only Liquid Nitrogen ( LN2 )-Cooled RF Coil for High-Resolution In Vivo Imaging on a 3-Tesla Whole-Body Scanner

    Hu, B., Varma, G., Schaeffter, T., Keevil, S. F. & Glover, P., 01/2012, In: IEEE Transactions on Instrumentation and Measurement. 61, 1, p. 129-139 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  66. Published

    A comparison of laser additive manufacturing using gas and plasma-atomized Ti-6A1-4V powders

    Ahsan, M. N., Pinkerton, A. J. & Ali, L., 2012, Innovative Developments in Virtual and Physical Prototyping. Bartolo, P., DeLemos, A., Tojeira, A., Pereira, A., Mateus, A., Mendes, A., DosSantos, C., Freitas, D., Bartolo, H., Almeida, H., IM, D., Dias, J., Domingos, M., Alves, N., Pereira, R., Patricio, T. & Ferreira, T. (eds.). Boca Raton: CRC PRESS-TAYLOR & FRANCIS GROUP, p. 625-633 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  67. Published

    A GPGPU accelerated compressed sensing with tight wavelet frame transform technique for MR imaging reconstruction

    Hu, B., Ma, X., Joyce, M., Glover, P. & Naleem, B., 2012, Imaging Systems and Techniques (IST), 2012 IEEE International Conference on. IEEE, p. 121-125 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  68. Published

    A verified model of transient and residual stresses in laser direct metal deposition

    Vogel, M., Khan, M., Ibarra-Medina, J., Pinkerton, A. J., N'Dri, N. & Megahed, M., 2012, Proceedings of the 31st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper 304

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  69. Published

    Accurate analysis of plasmonic devices with a new Drude Critical Points MRTD method

    Letizia, R. & Pinto, D., 2012, In: IEEE Photonics Technology Letters. 24, 18, p. 1587-1590 4 p.

    Research output: Contribution to Journal/Magazine › Letter › peer-review

  70. Published

    Additive manufacturing technology and material selection for direct manufacture of products based on computer aided design geometric feature analysis

    Smith, P., Lupeanu, M. & Rennie, A., 2012, In: International Journal of Materials and Structural Integrity. 6, 2-4, p. 96-110 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  71. Published

    Analysis and simulation of the effects of melt pool flow during laser deposition of a multiphase material

    Khan, M., Vogel, M., Ibarra-Medina, J., Pinkerton, A. J., N'Dri, N. & Megahed, M., 2012, Proceedings of the 31st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper P133

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  72. Published

    Analysis of impinging wall effects on hydrogen non-premixed flame

    Dinesh, K. K. J. R., Jiang, X. & van Oijen, J. A., 2012, In: Combustion Science and Technology. 184, 9, p. 1244-1268 25 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  73. Published

    Characterization of weld bead geometry in fibre laser butt welding of mild steel sheets by means of statistical modelling

    Eghlio, R. M., Pinkerton, A. J. & Li, L., 2012, In: Lasers in Engineering. 22, 5-6, p. 281-298 18 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  74. Published

    Comparison of THz backward wave oscillators based on corrugated waveguides.

    Mineo, M. & Paoloni, C., 2012, In: Progress In Electromagnetics Research Letters. 30, p. 163-171 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  75. Published

    Determination of the effect of part orientation to the strength value on additive manufacturing FDM for end-use parts by physical testing and validation via three-dimensional finite element analysis

    Hambali, R. H., Smith, P. & Rennie, A., 2012, In: International Journal of Materials Engineering Innovation. 3, 3-4, p. 269-281 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  76. Published

    Double Negative Metamaterial Inclusions in Photonic Crystal Based Resonant Cavities

    Letizia, R. & Pinto, D., 2012. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  77. Published

    Fabrication and Characterisation of the First Graphene Ring Micro Electrodes (GRIMEs)

    Dickinson, J., Andrieux, F. & Boxall, C., 2012, In: MRS Online Proceedings Library. 1407, 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  78. Published

    Fixed Contamination on Steel Surfaces: First Use of Quartz Crystal Microgravimetry to Measure Oxide Growth on Process Steels Under Conditions Typical of Nuclear Reprocessing

    Boxall, C., Woodhouse, B. & Wilbraham, R., 2012, In: MRS Online Proceedings Library. 1383, 6 p., mrsf11-1383-a07-04.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  79. Published

    Guest Editorial: The 36th MATADOR Conference 2010

    Pinkerton, A. J., 2012, In: Materials and Manufacturing Processes. 27, 4, p. 363-363 1 p.

    Research output: Contribution to Journal/Magazine › Editorial › peer-review

  80. Published

    Hydrolysis of Hydroxamic Acid Complexants in the Presence of Non-Oxidizing Metal Ions

    Boxall, C., Andrieux, F., Edwards, S., Taylor, R. J. & Woodhead, D., 2012, In: MRS Online Proceedings Library. 1383, 6 p., mrsf11-1383-a07-02.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  81. Published

    Investigation of water adsorption on metal oxide surfaces under conditions representative of PuO2 storage containers

    Murphy, P., Boxall, C. & Taylor, R. J., 2012, In: MRS Online Proceedings Library. 1383, mrsf11-1383-a07-08.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  82. Published

    Linear and nonlinear non-minimal state space control system design.

    Taylor, C. J., Chotai, A. & Tych, W., 2012, System Identification, Environmental Modelling and Control System Design. Wang, L. & Garnier, H. (eds.). London: Springer, p. 559-582 24 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  83. Published

    Low-level joint control of a robotic manipulator using state-dependent parameter models

    Robertson, D. & Taylor, C. J., 2012. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  84. Published

    Multi-scale modeling of the progressive damage in cross-ply laminates under thermal and mechanical loading

    Yang, D., Sheng, Y. & Ye, J., 2012, In: IOP Conference Series: Materials Science and Engineering. 40, 1

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  85. Published

    Non–minimal state variable feedback decoupling control for multivariable continuous–time systems

    Taylor, J., Chotai, A. & Cross, P., 2012, In: International Journal of Control. 85, 6, p. 722-734 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  86. Published

    Photoassisted Degradation of a Herbicide Derivative, Dinoseb, in Aqueous Suspension of Titania

    Mir, N. A., Haque, M. M., Khan, A., Muneer, M. & Boxall, C., 2012, In: Scientific World Journal. 2012, p. - 8 p., 251527.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  87. Published

    Photo-induced changes in the Langmuir adsorption constants of metal oxide layers in self-cleaning cation sensors.

    Foran, P. & Boxall, C., 2012, In: MRS Online Proceedings Library. 1406, 6 p., mrsf11-1406-z18-12.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  88. Published

    Practical experience with unified discrete and continuous–time, multi–input identification for control system design

    Taylor, C. J., Young, P. & Cross, P., 2012, 16th IFAC Symposium on System Identification. Kinnaert, M. (ed.). Brussels: IFAC, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper

  89. Published

    Real-time digital pulse-shape discrimination in non-hazardous fast liquid scintillation detectors: prospects for safety and security

    Joyce, M., Aspinall, M., Cave, F. & Lavietes, A., 2012, In: IEEE Transactions on Nuclear Science. 59, 4, p. 1245-1251 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  90. Published

    Recent developments in the CAPTAIN Toolbox for Matlab

    Young, P. & Taylor, C. J., 2012, 16th IFAC Symposium on System Identification . Kinnaert, M. (ed.). Brussels: IFAC, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper

  91. Published

    SSpace: A flexible and general state space toolbox for MATLAB.

    Taylor, C. J. & Pedregal, D. J., 2012, System Identification, Environmental Modelling and Control System Design. Wang, L. & Garnier, H. (eds.). London: Springer, p. 615-636 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  92. Published

    State-dependent control of a hydraulically-actuated nuclear decommissioning robot

    Robertson, D. & Taylor, C. J., 2012. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  93. Published

    State-dependent system identification for control of a hydraulically-actuated nuclear decommissioning robot

    Robertson, D., Taylor, C. J. & Lokuciewski, C., 2012, 16th IFAC Symposium on System Identification. Kinnaert, M. (ed.). Brussels: IFAC, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper

  94. Published

    Static shape control using piezoelectric actuator

    Bhagate, K., Ye, J. & Singh, A., 2012, Proceedings of the International Conference on Mechanics of Nano, Micro and Macro Compsite Structures: Politecnico di Torino, 19-20 June 2012. Ferreira, A. J. M. & Carrera, E. (eds.). 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  95. Published

    Surface Decontamination by Photocatalysis

    Boxall, C., Wilbraham, R., Taylor, R. J. & Woodbury, S., 2012, In: MRS Online Proceedings Library. 1383, 7 p., mrsf11-1383-a07-07.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  96. Published

    The impact of hybrid and electric powertrains on vehicle dynamics, control systems and energy regeneration

    Crolla, D. & Cao, D., 2012, In: Vehicle System Dynamics. 50, Supp. 1, p. 95-109 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  97. Published

    The Theta model: an essential forecasting tool for supply chain planning

    Nikolopoulos, K., Assimakopoulos, V., Bougioukos, N., Litsa, A. & Petropoulos, F., 2012, Advances in automation and robotics, Vol. 2: Selected Papers from the 2011 International Conference on Automation and Robotics (ICAR 2011), Dubai, December 1–2, 2011. Lee, G. (ed.). Berlin: Springer Verlag, Vol. 2. p. 431-437 7 p. (Lecture Notes in Electrical Engineering; vol. 123).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  98. Published
    No renderer
  99. Published

    Analysis and control of wakefields in X-band crab cavities for Compact Linear Collider

    Ambattu, P. K., Burt, G., Khan, V., Jones, R. M., Dexter, A. C. & Dolgashev, V., 21/11/2011, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 657, 1, p. 27-37 11 p.

    Research output: Contribution to Journal/Magazine › Journal article

  100. Published

    Beam dynamics simulations of the CLIC crab cavity and implications on the BDS

    Shinton, I. R. R., Burt, G., Glasman, C. J., Jones, R. M. & Wolski, A., 21/11/2011, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 657, 1, p. 126-130 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 3 4 5 6 7 8 Next

Back to top