Home > Research > School of Engineering > Publications & Outputs

Research

View graph of relations

School of Engineering

5526 - 5550 out of 6,167Page size: 25
RSS feed of this list
  1. Published

    Efficient Data Reduction at the Edge of Industrial Internet of Things for PMSM Bearing Fault Diagnosis

    Wang, X., Lu, S., Huang, W., Wanga, Q., Zhang, S. & Xia, M., 1/03/2021, In: IEEE Transactions on Instrumentation and Measurement. 70, 12 p., 3508612.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  2. Published

    Experimental investigation on the post-fire cyclic behavior of grouted sleeve connections

    Wang, T., Yu, M., Li, X., Yan, Z., Saafi, M. & Ye, J., 12/04/2021, In: Construction and Building Materials. 279, 13 p., 122394.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  3. Published

    Process parameter optimization for selective laser melting of Inconel 718 superalloy and the effects of subsequent heat treatment on the microstructural evolution and mechanical properties

    Wang, W., Wang, S., Zhang, X., Chen, F., Xu, Y. & Tian, Y., 30/04/2021, In: Journal of Manufacturing Processes. 64, p. 530-543 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    Enhanced aluminum alloy-polymer friction stir welding joints by introducing micro-textures

    Wang, W., Wang, S., Zhang, X., Xu, Y., Tian, Y. & Huang, H., 15/07/2021, In: Materials Letters. 295, 4 p., 129872.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  5. Published

    Deformation mechanisms in hexagonal close-packed high-entropy alloys

    Wang, Z., Bao, M. L., Wang, X. J., Liaw, P. K., Guo, R. P. & Qiao, J. W., 7/05/2021, In: Journal of Applied Physics. 129, 17, 10 p., 175104.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    Stray Flux-Based Rotation Angle Measurement for Bearing Fault Diagnosis in Variable-Speed BLDC Motors

    Wang, X., Lu, S., Cao, W., Xia, M., Chen, K., Ding, J. & Zhang, S., 31/12/2021, In: IEEE Transactions on Energy Conversion. 36, 4, p. 3156-3166 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Experimental and analytical study on the pre-crack impact response of thick multi-layered laminated glass under hard body impact

    Wang, X-E., Huang, X-H., Yang, J., Hou, X., Zhu, Y. & Xie, D., 15/09/2021, In: International Journal of Mechanical Sciences. 206, 20 p., 106613.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    Preparation and Properties of Mo Coating on H13 Steel by Electro Spark Deposition Process

    Wang, W., Du, M., Zhang, X., Luan, C. & Tian, Y., 1/07/2021, In: Materials. 14, 13, 15 p., 3700.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    The femtosecond laser induced Zr64.13Cu15.75Ni10.12Al10 amorphous periodic surface structure

    Wang, J., Zhang, P., Shen, L., Yu, Z., Shi, H. & Tian, Y., 30/09/2021, In: Journal of Manufacturing Processes. 69, p. 613-620 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  10. Published

    Modeling in Crystal Plasticity: from theory to application

    Wang, W. & Wen, W., 2021, Encyclopedia of Materials: Metals and Alloys. Elsevier, p. 552-560 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary

  11. Published

    Optimising the generation of hydrogen as a carbon-free fuel for the future, by development of new and unique catalytic coatings

    Wang, Y., 20/10/2021, Lancaster University. 119 p.

    Research output: Thesis › Master's Thesis

  12. Published

    Estimating microscale DE parameters of brittle adhesive joints using genetic expression programming

    Wang, X-E., Kanani, A. Y., Gu, Z., Yang, J., Ye, J. & Hou, X., 31/10/2022, In: International Journal of Adhesion and Adhesives. 118, 12 p., 103230.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  13. Published

    Adaptive Event-Triggered Control for Nonlinear Systems With Asymmetric State Constraints: A Prescribed-Time Approach

    Wang, Z., Lam, H-K., Guo, Y., Xiao, B., Li, Y., Su, X., Yeatman, E. & Burdet, E., 30/06/2023, In: IEEE Transactions on Automatic Control. 68, 6, p. 3625-3632 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    A novel genetic expression programming assisted calibration strategy for discrete element models of composite joints with ductile adhesives

    Wang, X-E., Kanani, A. Y., Pang, K., Yang, J., Ye, J. & Hou, X., 30/11/2022, In: Thin-Walled Structures. 180, 18 p., 109985.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    Enhancing interfacial bonding in friction stir lap welding of light metal and carbon fiber reinforced polymer composite

    Wang, S., Xu, Y., Wang, W., Tian, Y., Zhang, X., Huang, H. & Zheng, D., 30/11/2022, In: Journal of Manufacturing Processes. 83, p. 729-741 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    Particle-based micromechanical modelling of adhesive joint considering microscale surface roughness

    Wang, X-E., Hou, X., Ye, J., Pang, K. & Yang, J., 21/07/2022.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  17. Published

    Insights into the micromechanical response of adhesive joint with stochastic surface micro-roughness

    Wang, X., Pang, K., Huang, X., Yang, J., Ye, J. & Hou, X., 31/01/2023, In: Engineering Fracture Mechanics. 277, 19 p., 108954 .

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    In the Lab: Heterogeneous catalysis mediated interconversion between NAD(P)+ and NAD(P)H accompanied by consumption and generation of hydrogen

    Wang, X., 31/10/2023, In: Johnson Matthey Technology Review. 67, 4, p. 452 1 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    Electrodeposition of nickel–iron on stainless steel as an efficient electrocatalyst coating for the oxygen evolution reaction in alkaline conditions

    Wang, Y., Williamson, N., Dawson, R. & Bimbo, N., 31/05/2023, In: Journal of Applied Electrochemistry. 53, 5, p. 877-892 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    Investigation on the transitional micromechanical response of hybrid composite adhesive joints by a novel adaptive DEM model

    Wang, X., Yousefi Kanani, A., Gu, Z., Yang, J., Ye, J. & Hou, X., 30/04/2023, In: Theoretical and Applied Fracture Mechanics. 124, 15 p., 103760.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  21. Published

    Experimental study on random temperature field of ultra-high performance concrete filled steel tube columns under elevated temperature

    Wang, T., Yu, M., Zhang, X. & Ye, J., 1/06/2022, In: Composite Structures. 289, 17 p., 115445.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    Variant-Depth Neural Networks for Deblurring Traffic Images in Intelligent Transportation Systems

    Wang, Q., Guo, C., Dai, H-N. & Xia, M., 1/06/2023, In: IEEE Transactions on Intelligent Transportation Systems. 24, 6, p. 5792-5802 11 p., 6.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  23. E-pub ahead of print

    Learning to Assist Bimanual Teleoperation using Interval Type-2 Polynomial Fuzzy Inference

    Wang, Z., Fei, H., Huang, Y., Rouxel, Q., Xiao, B., Li, Z. & Burdet, E., 3/05/2023, (E-pub ahead of print) In: IEEE Transactions on Cognitive and Developmental Systems. p. 1-1 1 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    Multi-scale Modelling for Materials Design in Additive Manufacturing

    Wang, W., 4/07/2023, Lancaster University. 268 p.

    Research output: Thesis › Doctoral Thesis

  25. Published

    Security in defect detection: A new one-pixel attack for fooling DNNs

    Wang, P., Li, Q., Li, D., Meng, S., Bilal, M. & Mukherjee, A., 30/09/2023, In: Journal of King Saud University - Computer and Information Sciences. 35, 8, 101689.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...218 219 220 221 222 223 224 225 ...247 Next

Back to top