School of Engineering

View graph of relations

Faculty of Science and Technology

Show 14 centres, groups and clusters

Hide 14 centres, groups and clusters

5601 - 5700 out of 6,455Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Author last name

Published
Environmental effects on the failure of GRP multi-bolt joints
Turvey, G. J. & Wang, P., 08/2009, In: Proceedings of the ICE - Structures and Buildings. 162, 4, p. 275-287 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener
Turvey, G. J. & Salehi, M., 2008, In: Thin-Walled Structures. 46, 7-9, p. 991-1002 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Buckling of CFRP stiffened GRP flanges
Amal Afifi, 22/07/2008. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Bending of tip-loaded CFRP stiffened pultruded GRP cantilevers: comparison between theory and experiment
Turvey, G., 2/06/2008. 10 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effect of hole clearance on bolt loads in pultruded GRP tension joints
Turvey, G. & Wang, P., 8/07/2007. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener
Turvey, G. & Salehi, M., 26/06/2007. 27 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Opening mode failure of pultruded GRP angle leg junctions
Turvey, G. & Zhang, Y., 30/04/2007, p. 389-393. 5 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Pultruded GFRP continuus beams - comparison of flexural test data with analysis predictions
Turvey, G., 6/09/2011, p. 470-481.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Failure of single-lap single-bolt tension joints in pultruded glass fibre reinforced plate
Turvey, G., 13/06/2012. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
An experimental investigation of the tensile behaviour of single-lap bolted joints in pultruded GFRP plate
Turvey, G. & Gode, J., 13/09/2012. 15 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Flexure of pultruded glass-fibre-reinforced polymer beams with bonded splice joints
Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 333-344 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites
Turvey, G., 2011, Composite joints and connections: principles, modelling and testing. Camanho, P. & Tong, L. (eds.). Cambridge: Woodhead Publishing Limited, p. 77-111 35 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Enhancing the load capacity of pultruded GFRP beams via discrete load redistribution
Turvey, G., 04/2015, In: Composite Structures. 122, p. 352-360 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Flexural behavior of pultruded glass fibre reinforced polymer composite beams with bolted splice joints
Turvey, G. & Cerutti, X., 01/2015, In: Composite Structures. 119, 1, p. 543-550 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental and analytical investigation of two- and six-plate bonded splice joints on serviceability limit deformations of pultruded GFRP beams
Turvey, G., 05/2014, In: Composite Structures. 111, p. 426-435 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An experimental investigation of the failure of pultruded GFRP single-lap two-bolt connections in tension’
Turvey, G., 2014, Proceedings of the International Conference, FRP Bridges 2014.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Ultimate loads, strengths, extensions and strains of pultruded GFRP single-lap, single-bolt tension joints
Turvey, G., 2013, Proceedings of the International Conference on Advanced Composites in Construction 2013. p. 357-367 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Testing of pultruded GFRP materials and structures for civil engineering
Turvey, G., 2013, Advanced Composites in Civil Engineering. 1st ed. Woodhead Publishing Limited, p. 440-508 69 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
Single- and double-lap bolted joints in pultruded composite plate
Turvey, G., 2014.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effects of splice joint geometry and bolt torque of the serviceability response of pultruded glass fibre reinforced polymer composite beams
Turvey, G. & Cerutti, X., 1/11/2015, In: Composite Structures. 131, p. 490-500 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Testing and analysis of pultruded GFRP continuous beams for the deflection serviceability limit state
Turvey, G. J., 1/05/2016, In: Composite Structures. 141, p. 213-220 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
CFRP stiffened GFRP continuous beams – a simple closed-form analysis and its experimental verification for serviceability limit deformations
Turvey, G. J., 1/10/2016, In: Composite Structures. 153, p. 952-960 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pultruded GFRP double-lap single-bolt tension joints - temperature effects on mean and characteristic failure stresses and knock-down factors
Turvey, G. J. & Sana, A., 1/10/2016, In: Composite Structures. 153, p. 624-631 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental investigation of the load–deformation behaviour of pultruded GFRP modular and custom safety barriers
Turvey, G. J., 1/12/2015, In: Composite Structures. 133, p. 659-669 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Bending of unequal span continuous pultruded glass fibre reinforced polymer (GFRP) beams
Turvey, G. J., 2015, Advanced Composites in Construction, ACIC 2015 - Proceedings of the 7th Biennial Conference on Advanced Composites In Construction. p. 227-232 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Thermo-mechanically loaded glass-fibre-reinforced polymer single-bolt single-lap joints
Turvey, G. J. & Szulik, M., 11/2018, In: Proceedings of the ICE - Structures and Buildings. 171, 11, p. 830-841 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effects of Lap Thickness and Joint Geometry on Failure of Pultruded Composite Single-Lap Bolted Tension Joints
Turvey, G. J. & Assassa, J., 5/09/2017, p. 23-28. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
E-pub ahead of print
Mechanical properties of pultruded GFRP WF, channel and angle profiles for limit state/permissible stress design
Turvey, G. J. & Zhang, Y., 7/04/2018, (E-pub ahead of print) In: Composites Part B: Engineering. 148, p. 260-271 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Flexural moduli and end connection stiffnesses of symmetrically loaded GFRP beams for limit state serviceability design analysis
Turvey, G. J. & Zhang, Y.-S., 15/10/2018, In: Composite Structures. 202, p. 1164-1175 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Two-bay pultruded GFRP safety Barrier/Guardrail – Testing, analysis and compliance with standards
Turvey, G. J. & Milburn, J., 1/12/2020, In: Composite Structures. 253, 12 p., 112745.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Thermal preconditioning study for bolted tension joints in pultruded GRP plate
Turvey, G. & Wang, P., 1/02/2007, In: Composite Structures. 77, 4, p. 509-513 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Inclined composite guardrails/safety barriers – Numerical and experimental evaluation of their transverse stiffnesses and compliance with standards
Turvey, G. J. & Sutch, A., 15/11/2021, In: Composite Structures. 276, 9 p., 114552.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multi-state dependent parameter model identification and estimation
Tych, W., Sadeghi, J., Smith, P. J., Chotai, A. & Taylor, C. J., 2012, System Identification, Environmental Modelling, and Control System Design. Wang, L. & Garnier, H. (eds.). London: Springer, p. 191-210 20 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Radially and azimuthally polarized laser induced shape transformation of embedded metallic nanoparticles in glass
Tyrk, M. A., Zolotovskaya, S. A., Gillespie, W. A. & Abdolvand, A., 27/08/2015, In: Optics Express. 23, 18, p. 23394-23400 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real time nanogravimetric monitoring of corrosion for nuclear decommissioning
Tzagkaroulakis, I. & Boxall, C., 2015, In: ECS Transactions. 66, 17, p. 73-83 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real time nanogravimetric monitoring of corrosion in radioactive environments
Tzagkaroulakis, I., 2017, Lancaster University. 196 p.
Research output: Thesis › Doctoral Thesis
Published
Real-Time Nanogravimetric Monitoring of Corrosion in Radioactive Decontamination Systems
Tzagkaroulakis, I., Boxall, C. & Trivedi, D., 23/12/2016, In: MRS Advances. 2, 10, p. 577-582 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Advances and challenges of methanol-tolerant oxygen reduction reaction electrocatalysts for the direct methanol fuel cell
Ud Din, M. A., Idrees, M., Jamil, S., Irfan, S., Nazir, G., Mudassir, M. A., Saleem, M. S., Batool, S., Cheng, N. & Saidur, R., 28/02/2023, In: Journal of Energy Chemistry. 77, p. 499-513 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Ground Penetrating Radar as a Contextual Sensors for Multi-Sensor Radiological Characterisation
Ukaegbu, I. & Akurugoda Gamage, K. A., 7/04/2017, In: Sensors. 17, 4, p. 1-21 21 p., 790.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A novel method for remote depth estimation of buried radioactive contamination
Ukaegbu, I. & Akurugoda Gamage, K., 8/02/2018, In: Sensors. 18, 2, 13 p., 507.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Model For Remote Depth Estimation Of Buried Radioactive Wastes Using CdZnTe Detector
Ukaegbu, I. & Akurugoda Gamage, K., 18/05/2018, In: Sensors. 18, 5, 12 p., 1612.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Nonintrusive Depth Estimation of Buried Radioactive Wastes using Ground Penetrating Radar and a Gamma Ray Detector
Ukaegbu, I., Akurugoda Gamage, K. & Aspinall, M. D., 12/01/2019, In: Remote Sensing. 11, 2, 13 p., 141.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Integration of Ground-Penetrating Radar and Gamma-Ray Detectors for Nonintrusive Characterisation of Buried Radioactive Objects
Ukaegbu, I., Akurugoda Gamage, K. & Aspinall, M., 18/06/2019, In: Sensors. 19, 12, 13 p., 2743.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Validation of A Model for Nonintrusive Depth Estimation of Buried Radioactive Wastes
Ukaegbu, I. K. & Gamage, K. A. A., 5/09/2019, 2018 IEEE Nuclear Science Symposium and Medical Imaging Conference, NSS/MIC 2018 - Proceedings. IEEE, 3 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Estimating the Depth of Buried Radioactive Sources using Ground Penetrating Radar and a Gamma Ray Detector: 2019 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI 2019 - Proceedings
Ukaegbu, I. K., Aspinall, M. & Gamage, K. A. A., 10/10/2019, 2019 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium). IEEE, p. 99-100 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Integration of ground-penetrating radar and gamma-ray detectors for non-intrusive localisation of buried radioactive sources
Ukaegbu, I., 2020, Lancaster University. 245 p.
Research output: Thesis › Doctoral Thesis
Published
Vibration-based delamination detection in a composite plate
Ullah, I., Sinha, J. & Pinkerton, A., 2013, In: Mechanics of Advanced Materials and Structures. 20, 7, p. 536-551 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparative evaluation of optimum additive manufacturing technology to fabricate medical bespoke prototypes obtained with composite materials
Ulmeanu, M., Doicin, C., Baila, D., Rennie, A. E. W., Neagu, C. & Laha, S., 03/2015, In: Revista de Materiale Plastice. 52, 3, p. 416-422 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
New Tracheostomy Device Concept: An Additive Manufacturing Challenge in Reducing Late Clinical Complications
Ulmeanu, M.-E., Ulmeanu, L., Doicin, C.-V., Rennie, A. E. W. & Lupeanu, E., 11/2017, Proceedings of the 30th International Business Information Management Association Conference: Vision 2020: Sustainable Economic development, Innovation Management, and Global Growth. Soliman, K. S. (ed.). Madrid, Spain: International Business Information Management Association (IBIMA), p. 2611-2622 12 p. #538
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
TecHUB 4.0 - Technology and Entrepreneurship Education for Bridging the Gap in Smart Product Development
Ulmeanu, M., Doicin, C., Roșca, L., Rennie, A., Abram, T. & Bajdor, P., 21/08/2019, MATEC Web of Conferences. Bondrea, I., Cofaru, N. F. & Intă , M. (eds.). Sibiu, Romania: EDP Sciences, Vol. 290. 9 p. 13012
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Study regarding the influence of material type on economic objectives in MEx fabrication
Ulmeanu, M.-E., Doicin, C.-V., Roșca, L., Rennie, A., Abram, T. & Nuță, A.-B., 4/08/2021, In: MATEC Web of Conferences. 343, 11 p., 02009.
Research output: Contribution to Journal/Magazine › Conference article › peer-review
Published
A renewable lignin-derived bio-oil for boosting the oxidation stability of biodiesel
Umar, Y., Velasco, O., Abdelaziz, O. Y., Aboelazayem, O., Gadalla, M. A., Hulteberg, C. P. & Saha, B., 31/01/2022, In: Renewable Energy. 182, p. 867-878 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Waste cooking oil valorisation into biodiesel using supercritical methanolysis: critical assessment on the effect of water content
Umar, Y., Aboelazayem, O., Echresh, Z., Gadalla, M. & Saha, B., 26/05/2019.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Enhanced biodiesel production with improved oxidation stability by water addition to supercritical methanolysis
Umar, Y., Aboelazayem, O., Gadalla, M. & Saha, B., 30/09/2022, In: The Canadian Journal of Chemical Engineering (Wiley InterScience Publishers). 100, 9, p. 2587-2607 21 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Development of green molecularly imprinted polymers for the treatment of wastewater samples
Ünal, B. K., Karasu, T., Özgür, E. & Uzun, L., 1/01/2024, Green Imprinted Materials: From Design to Environmental and Food Applications. Elsevier, p. 171-191 21 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Dual-mode terahertz time-domain spectroscopy system
Ung, B. S. Y., Li, J., Lin, H., Fischer, B. M., Withayachumnankul, W. & Abbott, D., 20/02/2013, In: IEEE Transactions on Terahertz Science and Technology. 3, 2, p. 216-220 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Low-cost ultra-thin broadband terahertz beam-splitter
Ung, B. S. Y., Fumeaux, C., Lin, H., Fischer, B. M., Ng, B. W. H. & Abbott, D., 2012, In: Optics Express. 20, 5, p. 4968-4978 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Power scaling of ultra-thin terahertz beam-splitters
Ung, B. S. Y., Fumeaux, C., Lin, H., Fischer, B. M., Ng, B. W. H. & Abbott, D., 2012, Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), 2012 37th International Conference on. IEEE, 2 p. 6380077
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Mechanical response of stainless steel subjected to biaxial load path changes: Cruciform experiments and multi-scale modeling
Upadhyay, M. V., Patra, A., Wen, W., Panzner, T., Van Petegem, S., Tomé, C. N., Lebensohn, R. A. & Van Swygenhoven, H., 1/09/2018, In: International Journal of Plasticity. 108, p. 144-168 25 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Nano bioceramics for biomedical and other applications
ur Rehman, I., 2004, In: Materials Technology. 19, 4, p. 224-233 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Special issue: Molecular research on dental materials and biomaterials 2018
Ur Rehman, I. & Melo, M. A., 1/12/2020, In: International Journal of Molecular Sciences. 21, 23, p. 1-3 3 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Determination of serotonin using gold nanorod-terminated carbonaceous electrode by differential pulse voltammetry
Üstündağ, İ. & Şahin, S., 31/12/2023, In: Chemical Papers. 77, 12, p. 7447-7455 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Solubility of CO2 in glycerol at high pressures
V. M. Nunes, A., V.S.M. Carrera, G., Najdanovic-Visak, V. & Nunes da Ponte, M., 25/09/2013, In: Fluid Phase Equilibria. 358, p. 105–107 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Using a Mobile Phone as a “Wii-like” Controller for Playing Games on a Large Public Display.
Vajk, T., Coulton, P., Bamford, W. & Edwards, R., 01/2008, In: International Journal of Computer Games Technology. 2008, n/a, p. n/a 6 p., 539078.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparative RANS/LES study of transient gas jets and sprays under diesel conditions
Valentino, M., Jiang, X. & Zhao, H., 2007, In: Atomization and Sprays. 17, 5, p. 451-472 22 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Computational design of model Re/Ru bearing Ni-base superalloys
Vamsi, K. V., Goswami, K. N., Vinay, K. S., Verma, S. K., Balamuralikrishnan, R., Das, N., Banerjee, D. & Karthikeyan, S., 2014, In: MATEC Web of Conferences. 14, 1 p., 17007.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tidal range electricity generation: A comparison between estuarine barrages and coastal lagoons
Vandercruyssen, D., Baker, S., Howard, D. & Aggidis, G., 30/11/2022, In: Heliyon. 8, 11, 11 p., e11381.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
A Model of the Costs for Tidal Range Power Generation Schemes
Vandercruyssen, D., Howard, D. & Aggidis, G., 15/11/2022, (E-pub ahead of print) In: Proceedings of the ICE - Energy. p. 1-24 24 p., 2200058.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Tidal range power generation: case studies combining the Lancaster 0-D generation and cost models
Vandercruyssen, D., Baker, S., Howard, D. & Aggidis, G., 16/05/2023, (E-pub ahead of print) In: Proceedings of the ICE - Energy. p. 1-25 25 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tidal range electricity generation into the 22nd century
Vandercruyssen, D., Baker, S., Howard, D. & Aggidis, G., 30/11/2024, In: Proceedings of Institution of Civil Engineers: Energy. 177, 5, p. 205-213 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tidal Range Barrage Design and Construction
Vandercruyssen, D., Baker, S., Howard, D. & Aggidis, G., 1/06/2024, In: Applied Sciences. 14, 11, 19 p., 4592.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pulsed laser deposition of magnesium-doped calcium phosphate coatings on porous polycaprolactone scaffolds produced by rapid prototyping
Vandrovcova, M., Douglas, T. E. L., Mróz, W., Musial, O., Schaubroeck, D., Budner, B., Syroka, R., Dubruel, P. & Bacakova, L., 23/02/2015, In: Materials Letters. 148, p. 178-183 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Autolysis of Blakeslea trispora during carotene production from cheese whey in an airlift reactor
Varzakakou, M., Roukas, T., Papaioannou, E., Kotzekidou, P. & Liakopoulou-Kyriakides, M., 01/2011, In: Preparative Biochemistry and Biotechnology. 41, 1, p. 7-21 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
PRACTICAL DFT STRATEGY FOR FAULT-DIAGNOSIS IN ACTIVE ANALOG FILTERS
VAZQUEZ, D., RUEDA, A., HUERTAS, J. L. & RICHARDSON, A. M. D., 20/07/1995, In: Electronics Letters. 31, 15, p. 1221-1222 2 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The effect of organic acids on the behaviour and biodegradation of 14C-phenanthrene in contaminated soil
Vázquez-Cuevas, G. M., Lag-Brotons, A. J., Ortega-Calvo, J. J., Stevens, C. J. & Semple, K. T., 30/04/2020, In: Soil Biology and Biochemistry. 143, 8 p., 107722.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Integrated plasma gasification and SOFC system simulation using Aspen Plus
Vecten, S., Herbert, B., Wilkinson, M., Shaw, A., Bimbo, N. & Dawson, R. J., 3/07/2018, Proceedings of the 13th European SOFC & SOE Forum 2018. p. 410-
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Preliminary Characterisation of Carbon Dioxide and Steam Microwave Plasma Torch for Gasification Applications
Vecten, S., Dawson, R., Bimbo, N., Dexter, A., Martin, A., Herbert, B. & Wilkinson, M., 17/06/2019. 4 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Experimental Study of Steam and Carbon Dioxide Microwave Plasma for Advanced Thermal Treatment Application
Vecten, S., Wilkinson, M., Martin, A., Dexter, A., Bimbo, N., Dawson, R. & Herbert, B., 15/09/2020, In: Energy. 207, 9 p., 118086.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental investigation of the temperature distribution in a microwave-induced plasma reactor
Vecten, S., Wilkinson, M., Bimbo, N., Dawson, R. & Herbert, B. M. J., 1/02/2021, In: Fuel Processing Technology. 212, 11 p., 106631.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Hydrogen-rich syngas production from biomass in a steam microwave-induced plasma gasification reactor
Vecten, S., Wilkinson, M., Bimbo, N., Dawson, R. & Herbert, B. M. J., 31/10/2021, In: Bioresource Technology. 337, 8 p., 125324.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
Highly Efficient Generation of Energy from Waste and Biomass Using Microwave-Induced Plasma Gasification
Vecten, S., 08/2021, (Unpublished) Lancaster University. 220 p.
Research output: Thesis › Doctoral Thesis
Published
Velocity and Motion Control of a Self-Balancing Vehicle Based on a Cascade Control Strategy
Velazquez, M., Cruz, D., Garcia, S. & Bandala, M., 1/06/2016, In: International Journal of Advanced Robotic Systems. 13, 3
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Circular economy and the matter of integrated resources
Velenturf, A. P. M., Archer, S. A., Gomes, H. I., Christgen, B., Lag-Brotons, A. J. & Purnell, P., 1/11/2019, In: Science of the Total Environment. 689, p. 963-969 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Design and vertical tests of double-quarter wave cavity prototypes for the high-luminosity LHC crab cavity system
Verdú-Andrés, S., Burt, G. C. & Shipman, N., 13/08/2018, In: Physical Review Accelerators and Beams. 21, 8, 14 p., 082002.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparison between silicon and single-crystal diamond photodiodes for localized pulsed fast neutron detection
Verona, C., Verona-Rinati, G., Platt, S., Schooneveld, E. M. & Pietropaolo, A., 15/05/2018, In: EPL. 121, 6, 5 p., 68002.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Development of the self-modulation instability of a relativistic proton bunch in plasma
Verra, L., Wyler, S., Nechaeva, T., Pucek, J., Bencini, V., Bergamaschi, M., Ranc, L., Zevi Della Porta, G., Gschwendtner, E., Muggli, P., Agnello, R., Ahdida, C. C., Amoedo, C., Andrebe, Y., Apsimon, O., Apsimon, R., Arnesano, J. M., Blanchard, P., Burrows, P. N. & Buttenschön, B. & 67 others, Caldwell, A., Chung, M., Cooke, D. A., Davut, C., Demeter, G., Dexter, A. C., Doebert, S., Elverson, F. A., Farmer, J., Fasoli, A., Fonseca, R., Furno, I., Gorn, A., Granados, E., Granetzny, M., Graubner, T., Grulke, O., Guran, E., Henderson, J., Kedves, M. Á., Kim, S.-Y., Kraus, F., Krupa, M., Lefevre, T., Liang, L., Liu, S., Lopes, N., Lotov, K., Calderon, M. M., Mazzoni, S., Moon, K., Morales Guzmán, P. I., Moreira, M., Pakuza, C., Pannell, F., Pardons, A., Pepitone, K., Poimendidou, E., Pukhov, A., Ramjiawan, R. L., Rey, S., Rossel, R., Saberi, H., Schmitz, O., Senes, E., Silva, F., Silva, L., Spear, B., Stollberg, C., Sublet, A., Swain, C., Topaloudis, A., Torrado, N., Tuev, P., Turner, M., Velotti, F., Verzilov, V., Vieira, J., Weidl, M., Welsch, C., Wendt, M., Wing, M., Wolfenden, J., Woolley, B., Xia, G., Yarygova, V. & Zepp, M., 8/08/2023, In: Physics of Plasmas. 30, 8, 10 p., 083104.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Liquid-liquid equilibria for separation of tocopherol from olive oil using ethyl lactate
Vicente, G., Paiva, A., Fornari, T. & Najdanovic, V., 15/08/2011, In: Chemical Engineering Journal. 172, 2-3, p. 879-884 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
Production of fluid dynamically improved filters using additive manufacturing
Vijayakumar, B., Rennie, A. & Burns, N., 18/12/2012, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
How additive manufacturing helps in reducing power consumption in pumps
Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 9/08/2013.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Using additive manufacturing to build energy efficient filter supports
Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 10/2013. 9 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Introducing functionality to filter media
Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 6/11/2013. 10 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Introducing functionality to filter media
Vijayakumar, B., Rennie, A., Burns, N., Travis, D. & Battersby, P., 10/2014, In: Filtration. 14, 4, p. 217-222 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
Design and fabrication of novel, geometrically optimised conical inline filters/strainers for use in the process industries.
Vijayakumar, B., 7/10/2020, (Unpublished) Lancaster University. 308 p.
Research output: Thesis › Doctoral Thesis
Published
A global-scale screening of non-native aquatic organisms to identify potentially invasive species under current and future climate conditions
Vilizzi, L., Copp, G. H., Hill, J. E., Adamovich, B., Aislabie, L., Akin, D., Al-Faisal, A. J., Almeida, D., Azmai, M. N. A., Bakiu, R., Bellati, A., Bernier, R., Bies, J. M., Bilge, G., Branco, P., Bui, T. D., Canning-Clode, J., Cardoso Ramos, H. A., Castellanos-Galindo, G. A. & Castro, N. & 176 others, Chaichana, R., Chainho, P., Chan, J., Cunico, A. M., Curd, A., Dangchana, P., Dashinov, D., Davison, P. I., de Camargo, M. P., Dodd, J. A., Durland Donahou, A. L., Edsman, L., Ekmekçi, F. G., Elphinstone-Davis, J., Erős, T., Evangelista, C., Fenwick, G., Ferincz, Á., Ferreira, T., Feunteun, E., Filiz, H., Forneck, S. C., Gajduchenko, H. S., Gama Monteiro, J., Gestoso, I., Giannetto, D., Gilles A.S., J., Gizzi, F., Glamuzina, B., Glamuzina, L., Goldsmit, J., Gollasch, S., Goulletquer, P., Grabowska, J., Harmer, R., Haubrock, P. J., He, D., Hean, J. W., Herczeg, G., Howland, K. L., İlhan, A., Interesova, E., Jakubčinová, K., Jelmert, A., Johnsen, S. I., Kakareko, T., Kanongdate, K., Killi, N., Kim, J.-E., Kırankaya, Ş. G., Kňazovická, D., Kopecký, O., Kostov, V., Koutsikos, N., Kozic, S., Kuljanishvili, T., Kumar, B., Kumar, L., Kurita, Y., Kurtul, I., Lazzaro, L., Lee, L., Lehtiniemi, M., Leonardi, G., Leuven, R. S. E. W., Li, S., Lipinskaya, T., Liu, F., Lloyd, L., Lorenzoni, M., Luna, S. A., Lyons, T. J., Magellan, K., Malmstrøm, M., Marchini, A., Marr, S. M., Masson, G., Masson, L., McKenzie, C. H., Memedemin, D., Mendoza, R., Minchin, D., Miossec, L., Moghaddas, S. D., Moshobane, M. C., Mumladze, L., Naddafi, R., Najafi-Majd, E., Năstase, A., Năvodaru, I., Neal, J. W., Nienhuis, S., Nimtim, M., Nolan, E. T., Occhipinti-Ambrogi, A., Ojaveer, H., Olenin, S., Olsson, K., Onikura, N., O'Shaughnessy, K., Paganelli, D., Parretti, P., Patoka, J., Pavia R.T.B., J., Pellitteri-Rosa, D., Pelletier-Rousseau, M., Peralta, E. M., Perdikaris, C., Pietraszewski, D., Piria, M., Pitois, S., Pompei, L., Poulet, N., Preda, C., Puntila-Dodd, R., Qashqaei, A. T., Radočaj, T., Rahmani, H., Raj, S., Reeves, D., Ristovska, M., Rizevsky, V., Robertson, D. R., Robertson, P., Ruykys, L., Saba, A. O., Santos, J. M., Sarı, H. M., Segurado, P., Semenchenko, V., Senanan, W., Simard, N., Simonović, P., Skóra, M. E., Slovák Švolíková, K., Smeti, E., Šmídová, T., Špelić, I., Srėbalienė, G., Stasolla, G., Stebbing, P., Števove, B., Suresh, V. R., Szajbert, B., Ta, K. A. T., Tarkan, A. S., Tempesti, J., Therriault, T. W., Tidbury, H. J., Top-Karakuş, N., Tricarico, E., Troca, D. F. A., Tsiamis, K., Tuckett, Q. M., Tutman, P., Uyan, U., Uzunova, E., Vardakas, L., Velle, G., Verreycken, H., Vintsek, L., Wei, H., Weiperth, A., Weyl, O. L. F., Winter, E. R., Włodarczyk, R., Wood, L. E., Yang, R., Yapıcı, S., Yeo, S. S. B., Yoğurtçuoğlu, B., Yunnie, A. L. E., Zhu, Y., Zięba, G., Žitňanová, K. & Clarke, S., 20/09/2021, In: Science of the Total Environment. 788, 16 p., 147868.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Extraction of caffeine from natural matter using a bio-renewable agrochemical solvent
Villanueva Bermejoa, D., Luna, P., Manic , M., Najdanovic-Visak, V., Reglero, G. & Fornari, T., 10/2013, In: Food and Bioproducts Processing. 91, 4, p. 303-309 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of Magnesium Addition on the Cell Structure of Foams Produced From Re-melted Aluminum Alloy Scrap
Vinod-Kumar, G. S., Heim, K., Jerry, J., Garcia-Moreno, F., Kennedy, A. R. & Banhart, J., 1/10/2017, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 48, 5, p. 2551-2563 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Investigation of 2D-PBG waveguides for THz driven acceleration
Vint, A. & Letizia, R., 16/09/2018, LINAC 18 Proceedings. JACoW, p. 714-716 3 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Optimization of PBG-Waveguides for Terahertz-Driven Electron Acceleration
Vint, A., Burt, G. & Letizia, R., 1/04/2020, In: IEEE Transactions on Plasma Science. 48, 4, p. 1202-1209 8 p., 9046851.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Optimisation of PBG-Waveguides for THz-Driven Electron Acceleration
Vint, A., 2021, Lancaster University. 200 p.
Research output: Thesis › Doctoral Thesis
Published
Volumetric properties and spectroscopic studies of pyridine or nicotine solutions in liquid polyethylene glycols
Visak, Z. P., Ilharco, L. M., Garcia, A. R., Najdanovic, V., Fareleira, J. M. N. A., Caetano, F. J. P., Kijevcanin, M. L. & Serbanovic, S. P., 7/07/2011, In: Journal of Physical Chemistry B. 115, 26, p. 8481-8492 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...53 54 55 56 57 58 59 60 ...65 Next

Research

School of Engineering

Quick Links

Connect With Us