School of Engineering

View graph of relations

Faculty of Science and Technology

Show 10 centres, groups and clusters

Hide 10 centres, groups and clusters

201 - 250 out of 6,158Page size: 50

RSS feed of this list

Sort by: Author last name

Published
on Patent Application filed for GGG, Kendal, UK under the title: Improvements in or relating to turbines and in particular Pelton wheel turbines. EU Patent: European Union Patent Application, EC: F03B1/02, IPC: F03B1/02; (IPC1-7): F03B1/02, Publication info: CA2459626 - 2004-08-28, 28 August 2004, EP 1 452 731 A2 01.09.2004 and EP 1 452 731 A3, 28.02.2007.
Aggidis, G. A. & Aggidis, George A. (Patent applicant), 28/08/2004, IPC No. F03B1/02
Research output: Patent
Published
The costs of small-scale hydro power production: Impact on the development of existing potential.
Aggidis, G. A., Luchinskaya, E., Rothschild, R. & Howard, D. C., 12/2010, In: Renewable Energy. 35, 12, p. 2632-2638 7 p., 35 .
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Renewable energy support, activities and developments in the UK.
Aggidis, G. A., 07/2007, In: Electrical Engineering Research Report.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The Pump of the Future.
Aggidis, G. A., 09/2005, In: Water & Sewerage Journal. 3, p. 17-20 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fluid machinery and energy research on ocean energy and hydropower.
Aggidis, G., 2006.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
NW hydro resource model.
Aggidis, G., 2006.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Renewable energy research : ocean energy and hydropower.
Aggidis, G., 2006.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Resourceful solutions for hydro in the UK.
Aggidis, G., 17/08/2006, In: International Water Power and Dam Construction. 58, 9, p. 24-26 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Maximising the benefits of hydropower by developing the North-West England hydro resource model.
Aggidis, G., Howard, D. C., Rothschild, R. & Widden, M., 2006, In: Proceedings of the International Hydro Power & Dams Construction Journal. 7, 1
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A hydro power resource model for North West England.
Aggidis, G. A., Howard, D. C. & Wright, S. M., 2006, In water and the landscape : the landscape of ecology of freshwater ecosystems : Proceedings of the 14th annual IALE(UK) conference. Davies, B. & Thompson, S. (eds.). p. 41-46 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Energy source or sink? : The role of the Uplands in meeting our energy targets.
Aggidis, G. A., Howard, D. C., Wright, S. M. & Scott, R., 2006, Proceedings of the international Uplands centre conference on sustainable Uplands..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Energy source or sink? : The role of Uplands in meeting our energy targets.
Aggidis, G. A., Howard, D. C., Wright, S. M. & Scott, R., 09/2006, In: The International Journal of Biodiversity Science and Management. 2, 3, p. 196-199 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Research on wave energy converters and mooring systems in the United Kingdom.
Aggidis, G. A. & Huang, M., 2006, In: Water Resources and Power Journal (in Chinese). 24, 4, p. 37-40 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tidal range turbines and generation on the Solway Firth
Aggidis, G. & Feather, O., 07/2012, In: Renewable Energy. 43 , p. 9-17 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Optimum power capture of a new wave energy converter in irregular waves
Aggidis, G. A., Rahmati, M. T., Chaplin, R. V., McCabe, A. P., Bhinder, M. A., Mingham, C. G. & Causon, D. M., 2009, Proceedings of the 28th International Conference on Ocean, Offshore and Arctic Engineering--2009 : presented at [the] 28th International Conference on Ocean, Offshore and Arctic Engineering : May 31-June 5, 2009, Honolulu, Hawaii, USA. New York: American Society of Mechanical Engineers (ASME), Vol. 4 A & B. p. 885-890 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Operational optimisation of a tidal barrage across the Mersey estuary using 0-D modelling
Aggidis, G. & Benzon, D., 1/07/2013, In: Ocean Engineering. 66, p. 69-81 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Ocean energy: the wave of the future
Aggidis, G. A., 2008, Engineering a Safer Global Climate: The Power Sector's Response, 2008 IET Seminar on. IET Press, p. 1-15 15 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Hydro turbine prototype testing and generation of performance curves: fully automated approach
Aggidis, G. & Zidonis, A., 11/2014, In: Renewable Energy. 71, p. 433–441 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Investigating pipeline and state of the art blood glucose biosensors to formulate next steps
Aggidis, A., Newman, J. D. & Aggidis, G., 15/12/2015, In: Biosensors and Bioelectronics. 74, p. 243-262 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Overview of wave energy converter devices and the development of a new multi-axis laboratory prototype
Aggidis, G. A. & Taylor, C. J., 07/2017, In: IFAC-PapersOnLine. 50, 1, p. 15651-15656 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
UV LED water treatment systems and computational modelling
Aggidis, G., Shah, J., Zidonis, A. & Autin, O., 2/02/2022.
Research output: Contribution to conference - Without ISBN/ISSN › Speech
Published
IMechE Thomas Lowe Gray 2022 Lecture: Morecambe Bay Tidal Barrage
Aggidis, G., 24/05/2022.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Tidal Range Energy Opportunity for the UK
Aggidis, G., 8/11/2022.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Ocean Energy and TALOS Wave Energy Converter
Aggidis, G., 25/11/2022.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Methodology for the Optimization of a Novel Hydro Turbine with a Case Study
Aggidis, G., Židonis, A., Burtenshaw, L., Dubois, M., Orritt, S., Pickston, D., Prigov, G. & Wilmot, L., 15/11/2023, In: Energies. 16, 22, 7591.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Development of a Novel High Head Impulse Hydro Turbine
Aggidis, G., Židonis, A., Burtenshaw, L., Dubois, M., Orritt, S., Pickston, D., Prigov, G. & Wilmot, L., 27/12/2023, In: Sustainability. 16, 1, 253.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The Large Hadron–Electron Collider at the HL-LHC
Agostini, P., Apsimon, R., Bailey, I., Dainton, J., Perez-Segurana, G. & Ratoff, P., 20/12/2021, In: Journal of Physics G: Nuclear and Particle Physics. 48, 11, 364 p., 110501.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Biomechanical testing of the locking compression plate: When does the distance between bone and implant significantly reduce construct stability?
Ahmad, M., Nanda, R., Bajwa, A. S., Candal-Couto, J., Green, S. & Hui, A. C., 03/2007, In: Injury. 38, 3, p. 358-364 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
2-D Mxene flakes as potential replacement for both TCO and Pt layers for Dye-Sensitized Solar cell
Ahmad, M. S., Pandey, A. K., Abd Rahim, N., Aslfattahi, N., Mishra, Y. K., Rashid, B. & Saidur, R., 31/10/2021, In: Ceramics International. 47, 19, p. 27942-27947 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Influence of Fe–N–C morphologies on the oxygen reduction reaction in acidic and alkaline media
Ahmad Junaidi, N. H., Tan, S. Y., Wong, W. Y., Loh, K. S., Saidur, R., Choo, T. F. & Wu, B., 14/12/2023, In: Asia-Pacific Journal of Chemical Engineering. 18, 6, e2950.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Enhanced oxygen reduction reaction catalyst stability and durability of MXene-supported Fe-N-C catalyst for proton exchange membrane fuel cell application
Ahmad Junaidi, N. H., Wong, W. Y., Loh, K. S., Rahman, S., Choo, T. F. & Wu, B., 15/12/2023, In: Journal of Alloys and Compounds. 968, 171898.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Design of minimax-linear quadratic Gaussian controller using the frequency domain subspace identified model of flexible plate
Ahmadizadeh, S., Montazeri, A. & Poshtan, J., 04/2015, In: Journal of Vibration and Control. 21, 6, p. 1115-1143 29 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Identification of a stable model for a flexible plate using frequency domain subspace methods
Ahmadizadeh, S., Montazeri, A. & Poshtan, J., 2011, 18th IFAC World Congress. IFAC, p. 6517-6522 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Minimax-LQG control of a flexible plate using frequency domain subspace identified models
Ahmadizadeh, S., Montazeri, A., Poshtan, J., Mahjoob, M. J. & Kamaldar, M., 2011, Mechatronics (ICM), 2011 IEEE International Conference on. IEEE, p. 265-270 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparative study of different stable identification techniques using frequency domain subspace identification methods for a flexible plate
Ahmadizadeh, S., Poshtan, J. & Montazeri, A., 2011, p. 833-836. 4 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Design of a robust LQG controller based on subspace identified models for vibration supression of a flexible plate
Ahmadizadeh, S., Poshtan, J. & Montazeri, A., 04/2011, p. 842-845. 4 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Quantitative determination of tolfenamic acid and its pharmaceutical formulation using FTIR and UV spectrometry
Ahmed, S., Sheraz, M. A., Yorucu, C. & Rehman, I. U., 2013, In: Central European Journal of Chemistry. 11, 9, p. 1533-1541 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Studies on tolfenamic acid-chitosan intermolecular interactions: Effect of pH, polymer concentration and molecular weight
Ahmed, S., Sheraz, M. A. & Rehman, I. U., 2013, In: AAPS PharmSciTech. 14, 2, p. 870-879 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Surface-modified polymeric nanoparticles for drug delivery to cancer cells
Ahmed, A., Sarwar, S., Hu, Y., Munir, M. U., Nisar, M. F., Ikram, F., Asif, A., Rahman, S. U., Chaudhry, A. A. & Rehman, I. U., 31/01/2021, In: Expert Opinion on Drug Delivery. 18, 1, p. 1-24 24 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The Effects of Inlet Flow Rates and Slenderness Ratio on the Separation Performance of a Horizontal Three-Phase Separator
Ahmed, T., Russell, P., Makwashi, N., Hamad, F. & Gooneratne, S., 10/11/2021, In: SPE Production and Operation. 36, 4, p. 962-975 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Design and capital cost optimisation of three-phase gravity separators
Ahmed, T., Russell, P., Makwashi, N., Hamad, F. & Gooneratne, S., 23/06/2020, In: Heliyon. 6, 6, 13 p., E04065.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental Analysis and Computational-Fluid-Dynamics Modeling of Pilot-Scale Three-Phase Separators
Ahmed, T., Russell, P., Hamad, F. & Gooneratne, S., 30/11/2019, In: SPE Production and Operation. 34, 4, p. 805-819 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The Use of CFD Simulations to Compare and Evaluate Different Sizing Algorithms for Three-Phase Separators
Ahmed, T., Hamad, F. & Russell, P., 24/10/2017.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Assessment of thermo-hydraulic performance of MXene-based nanofluid as coolant in a dimpled channel: a numerical approach
Ahmed, F., Khanam, A., Samylingam, L., Aslfattahi, N. & Saidur, R., 30/11/2022, In: Journal of Thermal Analysis and Calorimetry. 147, 22, p. 12669-12692 24 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microcomputed tomography analysis of intralayer porosity generation in laser direct metal deposition and its causes
Ahsan, M. N., Bradley, R. & Pinkerton, A. J., 05/2011, In: Journal of Laser Applications. 23, 2, p. - 10 p., 022009.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparison of laser additive manufacturing using gas and plasma-atomized Ti-6A1-4V powders
Ahsan, M. N., Pinkerton, A. J. & Ali, L., 2012, Innovative Developments in Virtual and Physical Prototyping. Bartolo, PJ., DeLemos, ACS., Tojeira, APO., Pereira, AMH., Mateus, AJ., Mendes, ALA., DosSantos, C., Freitas, DMF., Bartolo, HM., Almeida, HD., IM, D., Dias, JR., Domingos, MAN., Alves, NMF., Pereira, RFB., Patricio, TMF. & Ferreira, TMD. (eds.). Boca Raton: CRC PRESS-TAYLOR & FRANCIS GROUP, p. 625-633 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti-6Al-4V powders
Ahsan, M. N., Pinkerton, A. J., Moat, R. J. & Shackleton, J., 25/09/2011, In: Materials Science and Engineering: A. 528, 25-26, p. 7648-7657 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An analytical-numerical model of laser direct metal deposition track and microstructure formation
Ahsan, M. N. & Pinkerton, A. J., 07/2011, In: Modelling and Simulation in Materials Science and Engineering. 19, 5, p. - 22 p., 055003.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Porous structures fabrication by continuous and pulsed laser metal deposition for biomedical applications; modelling and experimental investigation
Ahsan, M. N., Paul, C. P., Kukreja, L. M. & Pinkerton, A. J., 1/04/2011, In: Journal of Materials Processing Technology. 211, 4, p. 602-609 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
X-ray analysis of pore formation in direct metal deposition and its causes
Ahsan, M. N., Bradley, R. & Pinkerton, A. J., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 159-165 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 1 2 3 4 5 6 7 8 ...124 Next

Research

School of Engineering

Quick Links

Connect With Us