Manufacturing

View graph of relations

101 - 200 out of 1,001Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Title

Published
The effect of diode laser beam shape and traverse direction on the direct metal deposition process
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The effect of continuous and pulsed beam modes on cut path deviation in diode laser cutting of glass
Nisar, S., Li, L., Sheikh, M. A. & Pinkerton, A. J., 2010, In: International Journal of Advanced Manufacturing Technology. 49, 1-4, p. 167-175 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The effect of beam geometry on diode laser forming of sheet metals
Jamil, M. S. C., Pinkerton, A. J., Li, L. & Sheikh, M. A., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 495-502 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The dynamic volume changes of polymerising polymethyl methacrylate bone cement
Muller, S. D., Green, S. M. & McCaskie, A. W., 2002, In: Acta Orthopaedica Scandinavica. 73, 6, p. 684-687 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The development of temperature fields and powder flow during laser direct metal deposition wall growth
Pinkerton, A. J. & Li, L., 05/2004, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 218, 5, p. 531-541 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The development of an innovative SME-focused toolset integrating carbon footprint calculation with lean manufacturing waste reduction techniques
Wrigley, S., Lambert, C. & Rennie, A., 08/2008. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
The design & development of a simulator for in vitro testing of metatarsophalangeal prostheses
Joyce, T. J., Green, S. M. & Unsworth, A., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The dependence of recovery behaviour on mechanical properties of bone cement
Green, S., Liu, C., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 2000, PIMS 2000 : 9th International Conference on Polymers in Medicine & Surgery, 11 - 13 September 2000, Danube University, Krems, Austria. London: IOM communications, p. 89
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The business model for the functional rapid manufacturing supply chain
Hasan, S., Rennie, A. & Hasan, J., 01/2014, In: Studia Commercialia Bratislavensia. 6, 24, p. 536-552 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The behaviour of water- and gas-atomised tool steel powders in coaxial laser freeform fabrication
Pinkerton, A. J. & Li, L., 1/04/2004, In: Thin Solid Films. 453-454, 2, p. 600-605 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The application of rapid manufacturing technologies in the spare parts industry
Hasan, S. & Rennie, A., 08/2008, Sild Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 584-590 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
The agglomeration of polyethylene particles in the cell culture environment
Elfick, A. P. D., Green, S. M., McCaskie, A. & Birch, M., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The absence of nanometre sized UHMWPE wear particles retrieved from ex-vivo tissue
Green, S., Elfick, A. P. & Unsworth, A., 2001, Trans 4th Combined meeting Orthopaedic Research Societies of the USA, Europe Canada and Japan. Chicago, Ill. : Orthopaedic research society, p. 93 1 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
Tests on pultruded GRP posts for handrail/barrier structures.
Turvey, G. J. & Slater, R. C., 1992, First international conference on advanced composite materials in bridges and structures. Canada
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Testing of pultruded GFRP materials and structures for civil engineering
Turvey, G., 2013, Advanced Composites in Civil Engineering. 1st ed. Woodhead Publishing Limited, p. 440-508 69 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project
Turvey, G. J., 1995, EUROCOMP design guide and background projects. Clarke, J. L. (ed.). London: Chapman and Hall
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project
Turvey, G. J., 1996, Structural design of polymer composites: EUROCOMP design code and handbook. Clarke, J. L. (ed.). London: E. and FN Spon, p. 719-741 23 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Testing and analysis of pultruded GFRP continuous beams for the deflection serviceability limit state
Turvey, G. J., 1/05/2016, In: Composite Structures. 141, p. 213-220 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tension/compression strength of unnotched/notched pultruded GRP plate.
Turvey, G. J., 1992, Proceedings of the ECCM-composites testing and standardisation conference.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Tensile behaviour of low density thermally bonded nonwoven material
Hou, X., Acar, M. & Silberschmidt, V., 2009, In: Journal of Engineered Fibres and Fabrics . 4, 1, p. 26-33 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Templates for consumer use in designing customised products
Ariadi, Y. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 450-458 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
TecHUB 4.0 - Technology and Entrepreneurship Education for Bridging the Gap in Smart Product Development
Ulmeanu, M., Doicin, C., Roșca, L., Rennie, A., Abram, T. & Bajdor, P., 21/08/2019, MATEC Web of Conferences. Bondrea, I., Cofaru, N. F. & Intă , M. (eds.). Sibiu, Romania: EDP Sciences, Vol. 290. 9 p. 13012
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Tearing failure of web-flange junctions in pultruded GRP profiles.
Turvey, G. J. & Zhang, Y., 1/02/2005, In: Composites Part A: Applied Science and Manufacturing. 36, 2, p. 309-317 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tearing failure of web-flange junctions in pultruded GRP profiles.
Turvey, G. J. & Zhang, Y., 2003, Proceedings of the DFC-7 conference on deformation and fracture of composites.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Tailoring structure of inclusion with strain-induced closure to reduce Poisson's ratio of composite materials
Hou, X., Hu, H. & Silberschmidt, V., 2014, In: Journal of Applied Physics. 115, 8 p., 224903.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Systematic Review and Annotated Bibliography on Teaching in Higher Education Academies (HEAs) via Group Learning to Adapt with COVID-19
Amaechi, C. V., Amaechi, E. C., Onumonu, U. P. & Kgosiemang, I. M., 12/10/2022, In: Education Sciences. 12, 10, 44 p., 699.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Synthesis and characterization of alkali-activated loess and its application as protective coating
Dassekpo, J.-B., Feng, W., Li, Y., Miao, L., Dong, Z. & Ye, J., 3/05/2021, In: Construction and Building Materials. 282, 12 p., 122631.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Surface plasmon resonance assisted rapid laser joining of glass
Zolotovskaya, S. A., Tang, G., Wang, Z. & Abdolvand, A., 25/08/2014, In: Applied Physics Letters. 105, 8, 5 p., 083109.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Surface performance of a Ni-Ti shape memory alloy
Green, S., Grant, D. M. & Wood, J. V., 1995, Proceedings of SMST-94 : the First International Conference on Shape Memory and Superelastic Technologies, March 7-10, 1994, Asilomar Conference Center, Pacific Grove, California. Pelton, A. R., Hodgson, D. & Duerig, T. W. (eds.). Monterey, Calif.: Published under the aegis of the Organizing Committee of SMST-94, p. 91-96 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Surface modification of PTFE by plasma treatment
Liu, C., Arnell, R. D., Gibbons, A. R., Green, S. M., Ren, L. & Tong, J., 06/2000, In: Surface Engineering. 16, 3, p. 215-217 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Surface Flatness Measurement in Stereolithography
Male, J. C., Rennie, A. & Bennett, G. R., 06/2000, The Eighth International Conference on Rapid Prototyping: Proc. of. The University of Dayton, p. 111-117 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Surface finishing techniques for SLM manufactured stainless steel 316L components
Morton, W., Green, S., Rennie, A. & Abram, T., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proc. of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 503-509 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Superstructure Behavior of a Stub-Type Integral Abutment Bridge
David, T. K., Forth, J. & Ye, J., 2014, In: Journal of Bridge Engineering. 19, 8, 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Study regarding the influence of material type on economic objectives in MEx fabrication
Ulmeanu, M.-E., Doicin, C.-V., Roșca, L., Rennie, A., Abram, T. & Nuță, A.-B., 4/08/2021, In: MATEC Web of Conferences. 343, 11 p., 02009.
Research output: Contribution to Journal/Magazine › Conference article › peer-review
Published
Study of non-diffracting light beams from broad-stripe edge-emitting semiconductor lasers
Sokolovskii, G. S., Dudelev, V. V., Losev, S. N., Deryagin, A. G., Vinokurov, D. A., Lyutetskii, A. V., Pikhtin, N. A., Slipchenko, S. O., Tarasov, I. S., Zolotovskaya, S., Rafailov, E. U., Kuchinskii, V. I. & Sibbett, W., 01/2010, In: Technical Physics Letters. 36, 1, p. 9-12 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Study and applications of a Bounding Method in stability analysis of Stiffened composite aerospace panels
Ye, J., 2001, Solids, structures and coupled problems in engineering : : proceedings of the 2nd European Conference on Computational Mechanics 26-29 June 2001, Cracow Poland. Waszczyszyn , Z. & Pamin, J. (eds.). Cracow: Cracow University of Technology
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Structure and optical properties of CuxO- and CuxSe-doped sol–gel silica glasses
Gurin, V. S., Alexeenko, A. A., Yumashev, K. V., Prokoshin, P. V., Zolotovskaya, S. & Zhavnerko, G. A., 15/12/2003, In: Materials Science and Engineering: C . 23, 6-8, p. 1063-1067 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Structural Strength Analysis of a Rotary Drum Mower in Transportation Position
Celik, H. K., Akinci, I., Caglayan, N. & Rennie, A., 16/10/2023, In: Applied Sciences. 13, 20, 18 p., 11338.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Structural strength analysis of a rotary drum mower during harvesting
Celik, H. K., Akinci, I., Caglayan, N. & Rennie, A., 16/02/2024, In: Journal of Agricultural Engineering. 55, 1, 23 p., 1557.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Structural performance assessment of a woven-fabric reinforced composite as applied in construction of inflatable offshore fender barrier structures
Aboshio, A., Green, S. & Ye, J., 2015, In: International Journal of Structural Stability and Dynamics. 15, 1, 22 p., 1450036.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Structural optimisation of a subsoiler
Topakci, M., Celik, H. K., Canakci, M., Karayel, D. & Rennie, A., 09/2010, In: Pakistan Journal of Scientific and Industrial Research. 53, 5, p. 281-287 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Structural integrity monitoring of onshore wind turbine concrete foundations
Currie, M., Saafi, M., Tachtatzis, C. & Quail, F., 11/2015, In: Renewable Energy. 83, p. 1131-1138 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Structural and Stress Analysis: theories, Tutorial and Examples
Ye, J., 2008, UK: Spon Press (Taylor and Francis). 217 p.
Research output: Book/Report/Proceedings › Book
Published
Structural analysis of CFRP-plated pultruded GRP beams.
Turvey, G., 1/04/2006, In: Proceedings of the ICE - Structures and Buildings. 159, SB2, p. 65-75 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Stress transfer in cross-ply laminates with transverse cracks
Ye, J. & Yang, J., 2004, Computational Mechanics: Proceedings of the Sixth World Congress on Computational Mechanics in conjunction with the Second Asian-Pacific Congress on Computational Mechanics, September 5-10, 2004, Beijing, China . Yao, Z. H., Yuan, M. W. & Zhong, W. X. (eds.). Beijing: Tsinghua University Press & Springer-Verlag
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Stress distributions in multilayer laser deposited Waspaloy parts measured using neutron diffraction
Moat, R. J., Pinkerton, A. J., Hughes, D. J., Li, L., Withers, P. J. & Preuss, M., 2007, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Stress analysis of cross-ply composite laminates with transverse cracks
Yang, J., Ye, J. & Bao, Y., 12/2008, In: Mechanics of Composite Materials. 44, 6, p. 557-580 24 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Stress analysis of a sample marine crane’s boom under static loading condition
Celik, K., Caglayan, N., Cinar, R., Ucar, M., Ersoy, H. & Rennie, A., 06/2012, 5th International Mechanical Engineering Forum 2012: Proceedings of the . Prague, Czech Republic, p. 246-256 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Strengthening ductile metallic structures using externall bonded fibre reinforced composite materials
Anapolitanos, I., Lam, D. & Ye, J., 2006, Steel and Aluminium Structures, ICSAS'07: Proceedings of the Sixth International Conference on Steel and Aluminium Structures . Beale, R. G. (ed.). Oxford: Oxford Brookes University
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Strength-based Design Analysis of a Para-Plow Tillage Tool
Celik, H. K., Caglayan, N., Topakci, M., Rennie, A. & Akinci, I., 29/02/2020, In: Computers and Electronics in Agriculture. 169, 15 p., 105168.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Strength-Based Design Analysis of a Damaged Engine Mounting Bracket Designed for a Commercial Electric Vehicle
Celik, H. K., Ersoy, H., Dogan, A., Eravci, G., Rennie, A. & Akinci, I., 31/08/2021, In: Journal of Failure Analysis and Prevention. 21, 4, p. 1315-1322 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Strength of submarine hoses in Chinese-lantern configuration from hydrodynamic loads on CALM buoy
Amaechi, C. V., Facheng Wang, Hou, X. & Ye, J., 1/01/2019, In: Ocean Engineering. 171, p. 429-442 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Strength and fracture resistance of FRP reinforced concrete flexural members
Wu, Z. J. & Ye, J. Q., 02/2003, In: Cement and Concrete Composites. 25, 2, p. 253-261 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Statistical wear analysis of PA-6/UHMWPE alloy, UHMWPE and PA-6.
Liu, C. Z., Ren, L. Q., Tong, J., Joyce, T. J., Green, S. M. & Arnell, R. D., 04/2001, In: Wear. 249, 1-2, p. 31-36 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Statistical analysis of the effect of processing conditions on powder catchment efficiency in the Direct Laser Deposition (DLD) process
Syed, W. U. H., Pinkerton, A. J., Li, L., Al-Eid, E. & Pan, J., 2005, Virtual modeling and rapid manufacturing: advanced research in virtual and rapid prototyping. Bartolo, P. J., Mateus, A. J., Batista, F. C., Almeida, H. A., Vasco, J. C., Correia, M. A., Alves, N. F., Andre, N. C., Novo, P. P., Lima, P., Custodio, P. C., Martinho, P. G. & Carvolho, R. A. (eds.). London: Taylor and Francis, p. 361-367 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Stationary thermoelastic analysis of thick cross-ply laminated cylinders and cylindrical panels
SOLDATOS, K. P. & Ye, J., 03/1995, In: Acta Mechanica. 110, 1-4, p. 1-18 18 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Static shape control using piezoelectric actuator
Bhagate, K., Ye, J. & Singh, A., 2012, Proceedings of the International Conference on Mechanics of Nano, Micro and Macro Compsite Structures: Politecnico di Torino, 19-20 June 2012. Ferreira, A. J. M. & Carrera, E. (eds.). 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
State-of-the-art review of composite marine risers for floating and fixed platforms in deep seas
Amaechi, C. V., Reda, A., Shahin, M. A., Sultan, I. A., Beddu, S. B. & Ja'e, I. A., 30/09/2023, In: Applied Ocean Research. 138, 18 p., 103624.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
State space solution for thick laminated piezoelectric plates with clamped and electric open-circuited boundary conditions
Sheng, H. Y., Wang, H. & Ye, J. Q., 09/2007, In: International Journal of Mechanical Sciences. 49, 7, p. 806-818 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
State space solution for axisymmetric bending of angle-ply laminated cylinder with clamped edges
Sheng, H. Y. & Ye, J. Q., 04/2005, In: Composite Structures. 68, 1, p. 119-128 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
State dependent parameter model-based condition monitoring for wind turbines
Cross, P. & Ma, X., 2013, Proceedings of the 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies (CM 2013 & MFPT 2013). BINDT, 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Stable dual-wavelength operation of InGaAs diode lasers with volume Bragg gratings
Zolotovskaya, S. A., Daghestani, N., Venus, G. B., Glebov, L. B., Smirnov, V. I. & Rafailov, E. U., 22/10/2007, In: Applied Physics Letters. 91, 17, 3 p., 171113.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Spatially Resolved Operando Measurements in Heterogeneous Catalytic Reactors, Volume 50: Imaging Gas Flow in Gas–Solid Catalytic Systems by Near-Infrared Tomography
Aiouache, F., 17/11/2017, Spatially Resolved Operando Measurements in Heterogeneous Catalytic Reactors. Dixon, A. & Deutschmann, O. (eds.). Academic Press, p. 203-280 78 p. (Advances in Chemical Engineering; vol. 50).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Spatial near-infrared imaging of hydroxyl band coverage on ceria-based catalysts
Aiouache, F., Oyama, H. & Kitagawa, K., 04/2006, In: AIChE Journal. 52, 4, p. 1516-1521 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
SpaciMS: spatial and temporal operando resolution of reactions within catalytic monoliths
Sá, J., Fernandes, D. L. A., Aiouache, F., Goguet, A., Hardacre, C., Lundie, D., Naeem, W., Partridge, W. P. & Stere, C., 2010, In: Analyst. 135, 9, p. 2260-2272 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Sorption effect on kinetics of etherification of tert-amyl alcohol and ethanol
Aiouache, F. & Goto, S., 05/2003, In: Chemical Engineering Science. 58, 10, p. 2065-2077 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Some failure modes of four clinical bone cements
Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 1/04/2001, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 215, 4, p. 359-366 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Social Design Fiction. New Methods for the Design of Emerging Technology.
Pilling, M., Richards, D., Dunn, N. & Rennie, A., 31/05/2019, In: The Design Journal. 22, sup1, p. 1993-2005 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
SME expectations and experiences
Seward, D., Quayle, S., Rennie, A. & Taylor, S., 2005. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Speech
Published
SME application of LCA-based carbon footprints
Moss, J., Lambert, C. & Rennie, A., 06/2008, In: International Journal of Sustainable Engineering. 1, 2, p. 132-141 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Small-sized real-time digital simulator for the test of protective relay.
Liang, Z., Ma, X., Wang, H., Chen, Y. & Wang, L., 12/1999, In: Dianli Xitong Zidonghue/Automation of Electric Power Systems. 23, 23, p. 27-30 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Skills development of employees at SMEs in the construction sector in the North of England
Ganah, A. & Rennie, A., 09/2010, The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors (COBRA 2010): Proceedings of. Royal Institution of Chartered Surveyors (RICS), 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Sizing Optimisation of a Subsoiler Framework using Advanced Engineering Tools
Celik, K., Rennie, A., Topakci, M. & Akinci, I., 07/2011, Proceedings of the XXXIV CIOSTA CIGR V Conference 2011: Efficient and safe production processes in sustainable agriculture and forestry. 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Single-step laser deposition of functionally graded coating by dual 'wire-powder' or 'powder-powder' feeding: a comparative study
Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 31/07/2007, In: Applied Surface Science. 253, 19, p. 7926-7931 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Single-step graded surface coating using combined wire and powder feeding laser cladding
Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 787-795 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Single-bolt tension joints in pultruded GRP plate - effects of elevated temperature on failure loads, failure modes, load orientation and joint efficiency.
Turvey, G. & Wang, P., 2006, Proceedings of the 2nd international conference on joining plastics 2006..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single-bolt tension joint tests on pultruded GRP plate: effects of the orientation of the tension direction relative to pultrusion direction.
Turvey, G. J., 1998, In: Composite Structures. 42, 4, p. 341-351 11 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Single mode fibre laser welding of dissimilar aerospace alloys
Chen, H.-C., Pinkerton, A. J. & Li, L., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 505-510 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artifacts
Kaufman, J., Rennie, A. E. W. & Clement, M., 2015, In: Procedia CIRP. 36, p. 223-229 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artefacts
Kaufman, J., Rennie, A. & Clement, M., 03/2015. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Single bolt tension joints in pultruded GRP material – effect of elevated temperature on failure loads and strengths and joint efficiency.
Turvey, G. J. & Wang, P., 2001, Proceedings of the BSSM conference on strain measurement in the 21st century. p. 20-23 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single bolt tension joint tests on pultruded GRP WF-section web and flange material.
Turvey, G. J. & Cooper, C., 1995, Proceedings of the 10th international conference on composite materials (ICCM-10). Poursartip, A. & Street, K. (eds.). Vancouver: Woodhead Publishing Ltd., p. 621-628 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single- and double-lap bolted joints in pultruded composite plate
Turvey, G., 2014.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Simultaneous wire- and powder-feed direct metal deposition: An investigation of the process characteristics and comparison with single-feed methods
Syed, W. U. H., Pinkerton, A. J. & Li, L., 02/2006, In: Journal of Laser Applications. 18, 1, p. 65-72 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Simulation of flow characteristics for filters designed with a non-stochastic lattice structure fabricated via additive manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015, p. 153-158. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Simulation and manufacture of wax toolfaces for the creation of silicone rubber tools using Magics™ RP software
Rennie, A. & Bennett, G. R., 2000, In: International Journal of Engineering Simulation. 1, 3, p. 24-30 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Simplified solutions for the stress transfer in concrete beams bonded with FRP plates
Yang, J., Ye, J. & Niu, Z., 02/2008, In: Engineering Structures. 30, 2, p. 533-545 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Shoreline Delineation from Synthetic Aperture Radar (SAR) Imagery for High and Low Tidal States in Data-Deficient Niger Delta Region
Dike, E. C., Oyetunji, A. K., Amaechi, C. V. & Pattiaratchi, C. (Editor), 31/07/2023, In: Journal of Marine Science and Engineering (JMSE). 11, 8, 1528.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Shear failure strength of web-flange junctions in pultruded GRP profiles.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the ASIC 2004 conference: advanced polymer composites (ASIC 2004). p. 553-560 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Shape optimization of membrane structures based on finite element simulation
Lim, C. W., Toropov, V. V. & Ye, J., 2012, Proceedings of the Eleventh International Conference on Computational Structures Technology. Topping, B. H. V. (ed.). Stirlingshire, United Kingdom: Civil-Comp Press
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Shape Memory Transformation in Mechanically Alloyed Ni-50at % Ti
Green, S. M., Grant, D. M. & Wood, J. V., 1997, In: Journal de Physique 4. 07, C5, p. 351-356 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Sensitivity Studies on Offshore Submarine Hoses on CALM Buoy with Comparisons for Chinese‑Lantern and Lazy‑S Configuration: OMAE2019‑96755
Wang, F., Amaechi, C. V., Hou, X. & Ye, J., 10/06/2019.
Research output: Contribution to conference - Without ISBN/ISSN › Other › peer-review
Published
Sensing platform based on laser-engineered nanocomposite glass
Zolotovskaya, S. & Abdolvand, A., 5/09/2016, Photon16. IOP Publishing Ltd, p. 79 1 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
Semi-rigid pultruded GRP frame connections: tests to determine static moment-rotation characteristics.
Turvey, G. J. & Cooper, C., 1996, ECCM-7 Seventh European Conference on Composite Materials : realising their commercial potential. Bader, M. (ed.). Cambridge: Woodhead Publishing Limited, p. 295-300 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid connections and their effects on the sway response of pultruded GRP columns in low-rise construction.
Turvey, G. J. & Cooper, C., 1998, Proceedings of the 2nd international conference on composites in infrastructure (ICCI ’98). University of Arizona, p. 221-235 15 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid connection in pultruded GRP frame structures.
Turvey, G. J. & Cooper, C., 1998, Mechanics of composite materials and structures. Mota Soares, C. A. ,., Mota Soares, A. M. & Freitas, M. J. M. (eds.). p. 151-166 16 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid column base connections in pultruded GRP frame structures.
Turvey, G. J. & Cooper, C., 2000, In: Computers and Structures. 76, 1-3, p. 77-88 12 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Semi-rigid bolted connections in pultruded GRP beams and simple frames: part 1
Turvey, G. J., 1999, Proceedings of the COST C1 conference: COST C1: control of the semi-rigid behaviour of civil engineering structural connections. Liege, p. 547-556 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid behaviour of civil engineering structural connection.
Mottram, J. T. & Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and application of polymeric composite connections. Brussels/Luxembourg: European Commission, p. 99-99 1 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Selective laser sintering of calcium polyphosphate - Polyvinyl alcohol for biomedical applications
Shanjani, Y., Pinkerton, A. J. & Toyserkani, E., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 489-494 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 1 2 3 4 5 6 7 8 ...11 Next

Research

Manufacturing

Quick Links

Connect With Us