Manufacturing

View graph of relations

401 - 500 out of 1,001Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Title

Published
Motivation of engineering students-considerations for programme design
Green, S. & Meyer, J., 2010, p. P062. 9 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Monitoring degradation in the field
Swingler, J., Jones, J., Bryant, M. D., Feinberg, A., Ma, X. & Weaver, P. M., 30/12/2014, The physics of degradation in engineered materials and devices: fundamentals and principles. Swingler, J. (ed.). Momentum Press , p. 117-151 34 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
Moment resistance and rotation capacity of semi-rigid composite connections with precast hollowcore slabs
Fu, F., Lam, D. & Ye, J., 03/2010, In: Journal of Constructional Steel Research. 66, 3, p. 452-461 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Moment – rotation tests on bolted end connections in pultruded GRP beams – tests with stainless steel cleata and an assessment of their performance relative to GRP cleats.
Turvey, G. J., 2000, Proceedings in the ECCM9 (composites – from fundamentals to exploitation). Brighton
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Molten metal flow visualisation using mutual induction tomography (MIT).
Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X., 2004, 2004 Proceedings of the ASME 7th Biennial Conference on Engineering Systems Design & Analysis. Vol. 1. 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Modelling the temperature effects of melt pool position and wall height in additive manufacturing by direct laser deposition
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 1st International Conference on Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J., Mitchell, G., Mateus, A., Batista, F., Vasco, J., Correia, M., Andre, N., Lima, P., Novo, P., Custodio, P. & Martinho, P. (eds.). Leiria: Escola Superior Tecnologia Gestao Leiria, p. 224-231 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances
Pinkerton, A. J. & Li, L., 21/07/2004, In: Journal of Physics D: Applied Physics. 37, 14, p. 1885-1895 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modelling semi-rigid composite joints with precast hollowcore slabs in hogging moment region
Fu, F., Lam, D. & Ye, J., 12/2008, In: Journal of Constructional Steel Research. 64, 12, p. 1408-1419 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modelling powder concentration distribution from a coaxial deposition nozzle for laser-based rapid tooling
Pinkerton, A. J. & Li, L., 02/2004, In: Journal of Manufacturing Science and Engineering. 126, 1, p. 33-41 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modelling Composite Failure through Machine Learning
Ding, X., Hou, X., Xia, M., Ismail, Y. & Ye, J., 1/09/2020.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Modelling and Characterization of Novel Deepwater Composite Risers
Amaechi, C. V. & Ye, J., 28/06/2016.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Modeling progressive delamination of laminated composites by discrete element method
Yang, D., Ye, J., Tan, Y. & Sheng, Y., 01/2011, In: Computational Materials Science. 50, 3, p. 858-864 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modeling of a jig sampling and its application in disc cutter tools
Yahaya, S. H., Sihombing, H., Yaakob, M. Y. & Hasib, H., 2012, In: Journal of Mechanical and Civil Engineering . 3, 2, p. 20-23 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modeling and Characterization of Novel Deepwater Marine Risers
Amaechi, C. V. & Ye, J., 6/05/2017.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Model-based condition monitoring for wind turbines
Cross, P. & Ma, X., 2013, Automation and Computing (ICAC), 2013 19th International Conference on. IEEE, 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Model-based and fuzzy logic approaches to condition monitoring of operational wind turbines
Cross, P. & Ma, X., 02/2015, In: International Journal of Automation and Computing. 12, 1, p. 25-34 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modal analysis of agricultural machineries using finite element method: a case study for a V-belt pulley of a fodder crushing machine
Celik, H. K., Topakci, M., Canakci, M., Rennie, A. & Akinci, I., 12/11/2010, In: Journal of Food, Agriculture and Environment. 8, 3-4, p. 439-446 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Minimal Waste Galvonometer Field Correction for Additive Manufacturing
King, B., Bennett, G. R. & Rennie, A., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Migration of a cemented hip joint prosthesis within a novel composite femur
Green, S., Gregg, P., Liu, C., Watkins, N. D. & McCaskie, A. W., 2002, International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Microstructure effects on transverse cracking in composite laminae by DEM
Sheng, Y., Yang, D., Tan, Y. & Ye, J., 30/11/2010, In: Composites Science and Technology. 70, 14, p. 2093-2101 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel
Majumdar, J. D., Pinkerton, A. J., Liu, Z., Manna, I. & Li, L., 15/07/2005, In: Applied Surface Science. 247, 1-4, p. 320-327 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microscopic modelling of the hydraulic fracturing process
Eshiet, K., Sheng, Y. & Ye, J., 02/2013, In: Environmental Earth Sciences. 68, 4, p. 1169-1186 18 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microscale intrinsic properties of hybrid unidirectional/woven composite laminates: Part I experimental tests
Ye, J., Cai, H., Liu, L., Zhai, Z., Amaechi, C. V., Wang, Y., Wan, L., Yang, D., Chen, X. & Ye, J., 15/04/2021, In: Composite Structures. 262, 11 p., 113369.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microscale damage evolutions in fiber-reinforced composites with different initial defects
Ye, J., Hong, Y., Liu, L., Cai, H., He, W., Huang, B., Saafi, M., Wang, Y. & Ye, J., 1/01/2022, In: Composite Structures. 279, 14 p., 114856.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Micromechanical analysis of UD CFRP composite lamina under multiaxial loading with different loading paths
Chen, J., Wan, L., Ismail, Y., Hou, P., Ye, J. & Yang, D., 1/08/2021, In: Composite Structures. 269, 13 p., 114024.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Micro-mechanical analysis of splitting failure in concrete reinforced with fiber reinforced plastic rods
Ye, J. Q. & Wu, Z. J., 08/2000, In: Cement and Concrete Composites. 22, 4, p. 243-251 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microcomputed tomography analysis of intralayer porosity generation in laser direct metal deposition and its causes
Ahsan, M. N., Bradley, R. & Pinkerton, A. J., 05/2011, In: Journal of Laser Applications. 23, 2, p. - 10 p., 022009.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Metamodel-assisted design optimization of piezoelectric flex transducer for maximal bio-kinetic energy conversion
Luo, L., Liu, D., Zhu, M. & Ye, J., 1/11/2017, In: Journal of Intelligent Material Systems and Structures. 28, 18, p. 2528-2538 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Metamaterials with negative Poisson’s ratio: a review of mechanical propterties and deformation mechanisms
Hou, X. & Silberschmidt, V., 10/04/2015, Mechanics of Advanced Materials: Analysis of Properties and Performance. Silberschmidt, V. V. & Matveenko, V. P. (eds.). Springer International Publishing, p. 155-179 25 p. (Engineering Materials).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Meso-scale modelling of the thermo-mechanical response for concrete with complex-shaped aggregates in early age
Qiu, W., Fu, S., Zhu, J. & Ye, J., 14/03/2022, In: Construction and Building Materials. 323, 17 p., 126485.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Meso-scale computational modeling of the fracture of concrete with complex shaped aggregates under the self-restraint stress
Qiu, W., Ueda, T., Fu, S., Han, Y., Wang, J. & Ye, J., 1/01/2023, In: Composite Structures. 303, 21 p., 116267.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Mechanics, hydrodynamics and novel design of composite risers with application on offshore hoses
Amaechi, C. V. & Ye, J., 16/04/2021.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Mechanical and Thermal Analyses of Metal-PLA Components Fabricated by Metal Material Extrusion
Mohammadizadeh, M., Lu, H., Fidan, I., Tantawi, K., Gupta, A., Hasanov, S., Zhang, Z., Alifui-Segbaya, F. & Rennie, A., 24/08/2020, In: Inventions — Open Access Journal. 5, 3, 11 p., 44.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Mechanical and electrochemical properties of multiple-layer diode laser cladding of 316L stainless steel
Majumdar, J. D., Pinkerton, A. J., Liu, Z., Manna, I. & Li, L., 15/07/2005, In: Applied Surface Science. 247, 1-4, p. 373-377 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Measurement of the electrical conductivity of open-celled aluminium foam using non-contact eddy current techniques.
Ma, X., Peyton, A. J. & Zhao, Y. Y., 07/2005, In: NDT and E International. 38, 5, p. 359 -367
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Measurement and modelling of the elastic defection of novel metal syntactic foam composite sandwich structures in 3-point bending
Cheneler, D. & Kennedy, A. R., 1/03/2020, In: Composite Structures. 235, 6 p., 111817.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Maximum energy conversion from human motion using piezoelectric flex transducer: A multi-level surrogate modeling strategy
Luo, L., Liu, D., Zhu, M. & Ye, J., 1/09/2018, In: Journal of Intelligent Material Systems and Structures. 29, 15, p. 3097-3107 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Maximising the buckling loads of symmetrically laminated composite rectangular plates using a layerwise optimisation (LO) approach.
Narita, Y. & Turvey, G. J., 2004, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 218, 7, p. 681-691 11 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Maximising open area whilst retaining strength in novel metal additive manufactured filter media
Burns, N., Burns, M., Travis, D., Geekie, L., Hasib, H. & Rennie, A., 10/2014. 1 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Mathematical Modelling of Bonded Marine Hoses for Single Point Mooring (SPM) Systems, with Catenary Anchor Leg Mooring (CALM) Buoy Application: A Review
Amaechi, C. V., Wang, F. & Ye, J., 26/10/2021, In: Journal of Marine Science and Engineering (JMSE). 9, 11, 61 p., 1179.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
MATERIALS TESTING AND VOLUMETRIC ANALYSIS OF EXPLANTED ABG I CUP INSERTS
Chuter, G. S. J., Cloke, D. J., Green, S. M. & Partington, P. F., 1/05/2006, In: Journal of Bone and Joint Surgery, British Volume. 88-B, SUPP II, p. 246 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
Materials and Processing
Kennedy, A. & Shipway, P., 27/12/2022, Introduction to Mechanical Engineering: Part 1. Clifford, M. (ed.). London: Routledge, p. 89-184 96 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Material-efficient laser cladding for corrosion resistance
Mahmood, K., Stevens, N., Syed, W. U. H. & Pinkerton, A. J., 2011, Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 695-704 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Mass optimisation of 3D-printed specimens using multivariable regression analysis
Doicin, C.-V., Ulmeanu, M.-E., Rennie, A. & Lupeanu, E., 31/12/2021, In: International Journal of Rapid Manufacturing. 10, 1, p. 1-22 22 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Manufacturing of engineered novel additive manufactured polymer material from phase-field
Adefuye, E., Hou, X. & Ye, J., 1/04/2022.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Management of Biohazards and Pandemics: COVID-19 and Its Implications in the Construction Sector
Amaechi, C. V., Amaechi, E. C., Amechi, S. C., Oyetunji, A. K., Kgosiemang, I. M., Mgbeoji, O. J., Ojo, A. S., Moure Abelenda, A., Milad, M., Adelusi, I. & Coker, A. O., 28/01/2022, In: Computational Water, Energy, and Environmental Engineering. 11, 1, p. 34-63 30 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Magnetic induction tomography : image reconstruction on experimental data from various applications.
Soleimani, M., Ktistis, C., Ma, X., Yin, W., Lionheart, W. R. B. & Peyton, A. J., 06/2005. 4 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Machine Learning for Additive Manufacturing
Grierson, D., Rennie, A. & Quayle, S., 19/07/2021, In: Encyclopedia. 1, 3, p. 576-588 13 p.
Research output: Contribution to Journal/Magazine › Literature review › peer-review
Published
Low secondary electron yield engineered surface for electron cloud mitigation
Valizadeh, R., Malyshev, O. B., Wang, S., Zolotovskaya, S., Gillespie, W. A. & Abdolvand, A., 8/12/2014, In: Applied Physics Letters. 105, 23, 5 p., 231605.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Local tailored design of deep water composite risers subjected to burst, collapse and tension loads
Amaechi, C. V., 15/04/2022, In: Ocean Engineering. 250, 28 p., 110196.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Local buckling of axially compressed, pultruded GRP WF-section short columns – comparison of experimental response with FE analysis predictions.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the BSSM (British society for strain measurement) international conference on advances in experimental mechanics: advances in experimental mechanics. p. 87-92 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Local bridging effect of fractured laminated glass with EVA based hybrid interlayers under weathering actions
Yang, J., Wang, Y., Wang, X. E., Hou, X., Zhao, C. & Ye, J., 3/01/2022, In: Construction and Building Materials. 314, B, 13 p., 125595.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Local and Global Design of Composite Risers on Truss SPAR Platform in Deep waters
Amaechi, C. V., Ye, J., Hou, X., Gillett, N., Odijie, A. C. & Wang, F., 3/07/2019.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Load transfer mechanism of an unwelded, unbolted, grouted connection for prefabricated square tubular columns under axial loads
Sui, L., Fan, S., Huang, Z., Zhang, W., Zhou, Y. & Ye, J., 1/11/2020, In: Engineering Structures. 222, 18 p., 111088.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Liquid-liquid equilibria of ternary 2M1B/2M2B-2M1BOH-H2O and quaternary 2M1B-2M2B-2M1BOH-H2O mixtures
Aiouache, F. & Goto, S., 15/09/2001, In: Fluid Phase Equilibria. 187, p. 415-424 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Linear EMT for the detection of faults in metallic planar structures (DIF).
Yin, W., Ma, X., Zysko, G. & Peyton, A. J., 09/2007. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Lateral buckling tests on rectangular cross-section pultruded GRP cantilever beams.
Turvey, G. J., 1996, In: Composites Part B: Engineering. 27, 1, p. 35-42 8 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Lateral buckling tests on pultruded GRP I-section beams with simply supported - simply supported and clamped - simply supported end conditions.
Turvey, G. J. & Brooks, R. J., 1996, Proceedings of the 1st international conference on composites in infrastructure (ICCI '96). University of Arizona, p. 651-664 14 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Lateral buckling of pultruded GRP I-section cantilevers
Brooks, R. J. & Turvey, G. J., 1995, In: Composite Structures. 32, 1-4, p. 203-215 13 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Lasers in additive manufacturing
Pinkerton, A. J., 04/2016, In: Optics and Laser Technology. 78, Part A, p. 25-32 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Laser surface modification using Inconel 617 machining swarf as coating material
Mahmood, K., Stevens, N. & Pinkerton, A. J., 06/2012, In: Journal of Materials Processing Technology. 212, 6, p. 1271-1280 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Laser surface colouring of titanium for contemporary jewellery
O'Hana, S., Pinkerton, A. J., Shoba, K., Gale, A. W. & Li, L., 03/2008, In: Surface Engineering. 24, 2, p. 147-153 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Laser surface cladding of Inconel 617 chips on mild steel
Mahmood, K., Pinkerton, A. J. & Syed, W. U. H., 2011, Proceedings of the 25th International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Laser rapid manufacturing process advancement through powder morphology
Pinkerton, A. J., 2002.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Laser metal deposition of steel components using machining waste as build material
Mahmood, K., Khan, A. & Pinkerton, A. J., 2011, Proceedings of CLEO, the IEEE Conference on Lasers and Electro-Optics. New York: IEEE, p. - 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Laser direct metal deposition: theory and applications in manufacturing and maintenance
Pinkerton, A. J., 2010, Advances in laser materials processing : technology, research and applications. Lawrence, J. (ed.). Oxford: Woodhead Publishing Limited
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Laser direct deposition of carbon steel machining waste
Mahmood, K., Syed, W. U. H. & Pinkerton, A. J., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 1533-1540 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Laser clad corrosion protection for mild and harsh environments
Mahmood, K., Stevens, N. & Pinkerton, A. J., 09/2012, In: Surface Engineering. 28, 8, p. 576-584 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Laser and electron beams - evolving tools for surface engineering
Pinkerton, A. J., 04/2009, In: Surface Engineering. 25, 3, p. 177-179 3 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Large Deflection of Imperfect Plates by Iterative BE‐FE Method
Ye, J., 03/1994, In: Journal of Engineering Mechanics. 120, 3, p. 431-444 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Large deflection analysis of eccentrically stiffened sector plates.
Turvey, G. J. & Salehi, M., 1995, Proceedings of a conference on developments in computational techniques for civil engineering (CIVIL-COMP 95). Topping, B. H. V. (ed.). Edinburgh: Civil-Comp Press, p. 243-253 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Large deflection analysis of axisymmetric circular plates with variable thickness by the boundary element method
Ye, J., 06/1991, In: Applied Mathematical Modelling. 15, 6, p. 325-328 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Lancaster Virtual Prototyping Project: (GONW5167/8EUR – M4-07-LANC)
Rennie, A. E. W., 15/11/2006, Proceedings of the 4th EU Best Practice Conference: New Horizons in Graz..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Laminated composite plates and shells: 3D modelling
Ye, J., 2003, London: Springer-Verlag. 273 p.
Research output: Book/Report/Proceedings › Book
Published
Kinetics of Aqueous Phase Dehydration of Xylose into Furfural Catalyzed by ZSM-5 Zeolite
O'Neill, R., Ahmad, M. N., Vanoye, L. & Aiouache, F., 6/05/2009, In: Industrial and Engineering Chemistry Research. 48, 9, p. 4300-4306 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Kinetics and reactive stripping modelling of hydrogen isotopic exchange of deuterated waters
Aldehani, M., Alzahrani, F., tSaoir, M. N. A., Abreu Fernandes, D. L., Assabumrungrat, S. & Aiouache, F., 10/2016, In: Chemical Engineering and Processing: Process Intensification. 108, p. 58-73 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Kinetic study on 2-methyl-1-butanol dehydration catalysed by ion exchange resin
Aiouache, F. & Goto, S., 05/2002, In: Journal of Chemical Engineering of Japan. 35, 5, p. 436-442 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Irregular Shape Effect of Brass and Copper Filler on the Properties of Metal Epoxy Composite (MEC) for Rapid Tooling Application
Hussin, R., Sharif, S., Rahim, S. Z. B. A., Rennie, A., Suhaimi, M. A., Abdellah, A. E.-H., Shuaib, N. A., Khushairi, M. T. M. & Titu, A. M., 2/11/2022, In: Journal of Manufacturing and Materials Processing. 6, 6, 22 p., 134.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Ion beam modification of Ti6Al4V alloy for TJR
Green, S., Boampong, D. K. & Unsworth, A., 2002, p. L68.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Investigations of the state-of-the-art methods for electromagnetic NDT and electrical condition monitoring
Ma, X., 09/2012, In: Insight – Non-Destructive Testing and Condition Monitoring. 54, 9, p. 482-488 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Investigation on hydrodynamic characteristics, wave-current interaction, and sensitivity analysis of submarine hoses attached to a CALM buoy
Amaechi, C. V., Wang, F. & Ye, J., 17/01/2022, In: Journal of Marine Science and Engineering (JMSE). 10, 1, 48 p., 120.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Investigation of the Pressure Drop Across Packed Beds of Spherical Beads: Comparison of Empirical Models With Pore-Level Computational Fluid Dynamics Simulations
Otaru, A. J. & Kennedy, A. R., 8/04/2019, In: Journal of Fluids Engineering. 141, 7, 9 p., 071305.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Investigation into the use of wavelet theory for partial discharge pulse extraction in electrically noisy environments.
Ma, X., Zhou, C. & Kemp, I. J., 6/08/2002, Dielectric Materials, Measurements and Applications, 2000. Eighth International Conference on (IEE Conf. Publ. No. 473). IEE, p. 123-126 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Introducing functionality to filter media
Vijayakumar, B., Rennie, A., Burns, N., Travis, D. & Battersby, P., 10/2014, In: Filtration. 14, 4, p. 217-222 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Introducing functionality to filter media
Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 6/11/2013. 10 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Intragranular precipitation variations in laser deposited Waspaloy due to compositional inhomogeneities
Moat, R. J., Karadge, M., Pinkerton, A. J., Deschamps, A., Bley, F., Li, L., Withers, P. J. & Preuss, M., 2007, Proceedings of the 136th TMS Annual Meeting. The Minerals, Metals & Materials Society (TMS), p. 77-86 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Intracavity generation of 610 nm light by periodically poled near-stoichiometric lithium tantalate
Rautiainen, J., Okhotnikov, O. G., Eger, D., Zolotovskaya, S., Fedorova, K. A. & Rafailov, E. U., 29/01/2009, In: Electronics Letters. 45, 3, p. 177-179 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Interpretation of wavelet analysis and its application in partial discharge detection.
Ma, X., Zhou, C. & Kemp, I. J., 06/2002, In: IEEE Transactions on Dielectrics and Electrical Insulation. 9, 3, p. 446-457 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Interfacial stresses in plated beams with cracks
Yang, J. & Ye, J. Q., 2002, In: Composite Structures. 57, 1-4, p. 125-134 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Interfacial shear transfer of RC beams strengthened by bonded composite plates
Ye, J. Q., 2001, In: Cement and Concrete Composites. 23, 4-5, p. 411-417 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Interfacial shear stress in FRP-plated RC beams under symmetric loads
Yang, J., Ye, J. & Niu, Z., 05/2007, In: Cement and Concrete Composites. 29, 5, p. 421-432 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Interfacial effects on stress transfer in fiber-reinforced composites
Wu, Z. J., Ye, J. Q. & Cabrera, J. G., 2000, In: Mechanics of Composite Materials and Structures. 7, 4, p. 315-330 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Interfacial effects On RC beams strengthened by bonded composite plates
Ye, J., 1999, Proceedings of the Second Asia Pacific Specialty Conference on Fiber Reinforced Concrete . Lok, T. S. & Tseng, K. (eds.). Singapore
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Interactions between strip and beam elements of a hollow block slab system
Abou Ghadeer, M., Ye, J. Q. & Mansouri, A. H., 2003, Computational Fluid and Solid Mechanics 2003, Vols 1 and 2, Proceedings. Bathe, K. J. (ed.). Amsterdam: ELSEVIER SCIENCE PUBL B V, p. 42-46 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Integrating CFD and prototyping technologies in the investigation of multi-element profiles for a high-lift variable pitch vertical-axis tidal power generator
Quayle, S. & Rennie, A., 2007, In: International Journal of Agile Systems and Management. 2, 2, p. 222-236 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Insights into the micromechanical response of adhesive joint with stochastic surface micro-roughness
Wang, X.-E., Pang, K., Huang, X., Yang, J., Ye, J. & Hou, X., 31/01/2023, In: Engineering Fracture Mechanics. 277, 19 p., 108954 .
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Innovative reconsolidation of carbon steel machining swarf by laser metal deposition
Mahmood, K., Syed, W. U. H. & Pinkerton, A. J., 02/2011, In: Optics and Lasers in Engineering. 49, 2, p. 240-247 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Innovations in filtration through additive manufacturing: Paper: EP140165
Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 09/2014. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Injection Mould Tool Manufacture in Less Than Five Days
Jacobson, D. M., Bocking, C. E. & Rennie, A., 03/2002, RAPRA Rapid Tooling Conference 2002: Conference Proceedings. RAPRA, p. 35-43 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Injection mould tool manufacture in less than five days
Jacobson, D., Bocking, C. & Rennie, A. E. W., 1/06/2002, 9 p. Society of Manufacturing Engineers.
Research output: Other contribution

Previous 1 2 3 4 5 6 7 8 ...11 Next

Research

Manufacturing

Quick Links

Connect With Us