Manufacturing

View graph of relations

901 - 1000 out of 1,001Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Title

Published
Additively manufactured foamed polylactic acid for lightweight structures
Yousefi Kanani, A., Rennie, A. & Rahim, S. Z. B. A., 2/01/2023, In: Rapid Prototyping Journal. 29, 1, p. 50-66 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Additive manufacturing technology and material selection for direct manufacture of products based on computer aided design geometric feature analysis
Smith, P., Lupeanu, M. & Rennie, A., 2012, In: International Journal of Materials and Structural Integrity. 6, 2-4, p. 96-110 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Additive manufacturing technologies and functional analysis used in product development optimization
Lupeanu, M., Rennie, A. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 105-112 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Unpublished
Additive manufacturing in assistive product design development
Sembiring, E., Rennie, A. & Laha, S., 12/2014, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Additive manufacturing enabled synergetic strengthening of bimodal reinforcing particles for aluminum matrix composites
Ma, S., Shang, Z., Shang, A., Zhang, P., Tang, C., Huang, Y., Leung, C. L. A., Lee, P. D., Zhang, X. & Wang, X., 25/05/2023, In: Additive Manufacturing. 70, 103543.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Additive Manufacturing as an Enabler of Environmental Solutions to Address Food Security
Roberts, J., Donkersley, P., Ashmore, L. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 287-297 11 p. (Springer Tracts in Additive Manufacturing).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
Adaptive stochastic morphology simulation and mesh generation of high-quality 3D particulate composite microstructures with complex surface texture
Huang, J., Deng, F., Liu, L. & Ye, J., 1/04/2022, In: Computer Methods in Applied Mechanics and Engineering. 393, 45 p., 114811.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Adaptive materials: utilising additive manufactured scaffolds to control self-organising material aggregation
Blaney, A., Alexander, J. M., Dunn, N. S., Richards, D. C., Rennie, A. E. W. & Anwar, J., 12/2015, Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference. Rennie, A. & Bibb, R. (eds.). Loughborough: Lancaster University, p. 49-57 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Accuracy of design sensitivity for optimization of structural using small strain theory by finite element method
Bhagate, K. A., Pawar, P., Singh , A. K. & Ye, J., 2006, III European Conference on Computational Mechanics : Solids, Structures and Coupled Problems in Engineering: Book of Abstracts. Motasoares, C. A., Martins, J. A. C., Rodrigues, H. C., Ambrósio, J. A. C., Pina, C. A. B., Motasoares , C. M., Pereira, E. B. R. & Folgado, J. (eds.). Berlin: Springer, p. 711-711 1 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Absorption saturation properties and laser Q-switch performance of Cr5+-doped YVO4 crystal
Zolotovskaya, S., Yumashev, K. V., Kuleshov, N. V., Matrosov, V. N., Matrosova, T. A. & Kupchenko, M. I., 03/2007, In: Applied Physics B. 86, 4, p. 667-671 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A water-soluble core material for manufacturing hollow composite sections
Xiao, Z., Harper, L. T., Kennedy, A. R. & Warrior, N. A., 15/12/2017, In: Composite Structures. 182, p. 380-390 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A verified model of transient and residual stresses in laser direct metal deposition
Vogel, M., Khan, M., Ibarra-Medina, J., Pinkerton, A. J., N'Dri, N. & Megahed, M., 2012, Proceedings of the 31st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper 304
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A verified model of the behaviour of the axial powder stream concentration from a coaxial laser cladding nozzle
Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A verified model of laser direct metal deposition using an analytical enthalpy balance method
Pinkerton, A. J., Moat, R., Shah, K., Li, L., Preuss, M. & Withers, P. J., 2007, Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A unified method for calculating the fire resistance of concrete-filled steel tube with fire protection under combined loading
Yu, M., Hu, X., Chi, Y. & Ye, J., 31/05/2020, In: Journal of Constructional Steel Research. 168, 17 p., 106003.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A unified method for calculating fire resistance of solid and hollow concrete-filled steel tube columns based on average temperature
Yu, M., Zha, X., Ye, J. & Wang, B., 15/07/2014, In: Engineering Structures. 71, p. 12-22 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A unified interaction equation for strength and global stability of solid and hollow concrete-filled steel tube columns under room and elevated temperatures
Yu, M., Xu, H., Ye, J. & Chi, Y., 1/09/2018, In: Journal of Constructional Steel Research. 148, p. 304-313 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A unified formulation for hollow and solid concrete-filled steel tube columns under axial compression
Yu, M., Zha, X., Ye, J. & She, C., 04/2010, In: Engineering Structures. 32, 4, p. 1046-1053 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A unified formulation for circle and polygon concrete-filled steel tube columns under axial compression
Yu, M., Zha, X., Ye, J. & Li, Y., 04/2013, In: Engineering Structures. 49, p. 1-10 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A unified approach for the linear and nonlinear analysis of plates and shallow shells
Ye, J., 1993, In: Thin-Walled Structures. 17, 3, p. 223-236 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A transnational approach to the implementation of eco-design methodologies in SMEs
Rennie, A., Lambert, C., Baker, N. & Hjelm, O., 10/07/2007, The proceedings of the 5th International Conference on Design & Manufacture for Sustainable Development : Loughborough University, 10th - 11th July 2007.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A three-dimensional state space finite element solution for laminated composite cylindrical shells
Sheng, H. Y. & Ye, J. Q., 2003, In: Computer Methods in Applied Mechanics and Engineering. 192, 22-24, p. 2441-2459 19 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A three-dimensional inverse finite-element method applied to experimental eddy-current imaging data.
Soleimani, M., Lionheart, W. R. B., Peyton, A. J., Ma, X. & Higson, S. R., 05/2006, In: IEEE Transactions on Magnetics. 42, 5, p. 1560 -1567
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A three-dimensional free vibration analysis of cross-ply laminated rectangular plates with clamped edges
Ye, J. Q., 30/01/1997, In: Computer Methods in Applied Mechanics and Engineering. 140, 3-4, p. 383-392 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A system for the generation of liquid metal droplets using electromotive forces
Rennie, A. & Bennett, G. R., 09/1997, Proceedings World Congress: Manufacturing Technology Towards 2000: Incorporating the 7th International Conference on Manufacturing Engineering and the 3rd Australasian Conference on Rapid Product Development. James Cook University of North Queensland, p. 501-510 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
A successive bounding method to find the exact eigenvalues of transcendental stiffness matrix formulations
Ye, J. & Williams, F. W., 30/03/1995, In: International Journal for Numerical Methods in Engineering. 38, 6, p. 1057-1067 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A study of computational mechanics of 3D spacer fabric: factors affecting its compression deformation
Hou, X., Hu, H. & Silberschmidt, V., 05/2012, In: Journal of Materials Science. 47, 9, p. 3989–3999 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A state space finite element for laminated composites with free edges and subjected to transverse and in-plane loads
Ye, J., Sheng, H. & Qin, Q., 06/2004, In: Computers and Structures. 82, 15-16, p. 1131-1141 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A state space finite element for laminated composite plates
Sheng, H. Y. & Ye, J. Q., 16/08/2002, In: Computer Methods in Applied Mechanics and Engineering. 191, 37-38, p. 4259-4276 18 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Short Review on 4D Printing
Khan, F., Celik, H. K., Oral, O. & Rennie, A. E. W., 07/2018, In: International Journal of 3D Printing Technologies and Digital Industry. 2, 2, p. 59-67 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Short Review on 4D Printing
Khan, F., Celik, H. K., Oral, O. & Rennie, A. E. W., 04/2018, 3rd International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2018. Çetinkaya, K., Özsoy, K., Duman, B. & Kayaalp, K. (eds.). Antalya, Turkey, p. 199-203 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
A series solution of the exact equation for thick orthotropic plates
Fan, J. & Ye, J., 1990, In: International Journal of Solids and Structures. 26, 7, p. 773-778 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A semi-analytical finite element for laminated composite plates
Sheng, H. Y. & Ye, J. Q., 07/2002, In: Composite Structures. 57, 1-4, p. 117-123 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A review on the potential of polylactic acid based thermoplastic elastomer as filament material for fused deposition modelling
Musa, L., Kumar, N. K., Rahim, S. Z. B. A., Rasidi, M. S. M., Rennie, A., Rahman, R., Yousefi Kanani, A. & Azmi, A. A., 30/09/2022, In: Journal of Materials Research and Technology. 20, p. 2841-2858 18 p.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
A review on graft compatibilizer for thermoplastic elastomer blend
Kumar, N. K., Musa, L., Rasidi, M. S. M., Rahim, S. Z. A., Rahman, R., Azmi, A. A. & Rennie, A., 12/10/2021, In: Journal of Physics: Conference Series. 2080, 8 p., 012003.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A review of suitable methods for producing automated or semi automated product designs for production using RM technologies
Rennie, A. & Smith, P., 2009, 14th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A remote condition monitoring system for wind-turbine based DG systems
Ma, X., Wang, G., Cross, P. & Zhang, X., 31/05/2012, In: Journal of Physics: Conference Series. 364, 1, 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A re-appraisal of wear features of acetabular sockets using atomic force microscopy.
Elfick, A. P. D., Smith, S. L., Green, S. M. & Unsworth, A., 10/2002, In: Wear. 253, 7-8, p. 839-847 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A preliminary hip joint simulator study of the migration of a cemented femoral stem
Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 02/2003, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 217, 2, p. 127-135 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A portable multi-functional real-time digital simulator dedicated to protective relay testing
Liang, Z., Ma, X., Wang, H. & Wang, L., 12/1998, In: Electricity. 9, 4, p. 27-29 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A parametric study of adhesive bonded joints with composite material using black-box and grey-box machine learning methods: Deep neuron networks and genetic programming
Gu, Z., Liu, Y., J.Hughes, D., Ye, J. & Hou, X., 15/07/2021, In: Composites Part B: Engineering. 217, 11 p., 108894.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A numerical modeling approach of composite risers for deep waters
Amaechi, C. V. & Ye, J., 8/09/2017, ICCS20 20th International Conference on Composite Structures. Ferreira, A. J. M., Larbi, W., Deu, J.-F., Tornabene, F. & Fantuzzi, N. (eds.). Societa Editrice Esculapio, p. 262-263 2 p. (Structural and Computational Mechanics Book Series).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
A Numerical Modeling Approach of Composite Riser Hoses
Amaechi, C. V. & Ye, J., 19/12/2017.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
A Numerical Method-Based Analysis of the Structural Deformation Behaviour of a Turkish String Instrument (Cura Baglama) under Varying String Tensions
Celik, H. K., Gok, S., Caglayan, N. & Rennie, A., 27/08/2023, In: Applied Sciences. 13, 17, 15 p., 9682.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A numerical investigation of powder heating in coaxial laser direct metal deposition
Ibarra-Medina, J. & Pinkerton, A. J., 2010, Proceedings of the 36th International Matador Conference. Hinduja, S. & Li, L. (eds.). London: Springer, p. 455-458 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A novel technique for the detailed size characterization of wear debris.
Elfick, A. P., Green, S. M., Pinder, I. M. & Unsworth, A., 05/2000, In: Journal of Materials Science: Materials in Medicine. 11, 5, p. 267-271 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Novel Self‐Updating Design Method for Complex 3D Structures Using Combined Convolutional Neuron and Deep Convolutional Generative Adversarial Networks
Gu, Z., Hou, X., Saafi, M. & Ye, J., 30/06/2022, In: Advanced Intelligent Systems. 4, 6, 10 p., 2100186.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A novel micromechanical method for nonlinear analysis of magnetostrictive composites
Li, Z., Wang, Y., Liu, L., Shi, Y., Li, Y. & Ye, J., 1/05/2023, In: Composite Structures. 311, 16 p., 116633.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A novel method for the manufacture of porous structures with multi-component, coated pores
Siddiq, A. R. & Kennedy, A. R., 1/06/2017, In: Materials Letters. 196, p. 324-327 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A novel genetic expression programming assisted calibration strategy for discrete element models of composite joints with ductile adhesives
Wang, X.-E., Kanani, A. Y., Pang, K., Yang, J., Ye, J. & Hou, X., 30/11/2022, In: Thin-Walled Structures. 180, 18 p., 109985.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Novel Feature-Based Manufacturability Assessment System for Evaluating Selective Laser Melting and Subtractive Manufacturing Injection Moulding Tool Inserts
Kashouty, M. F. E., Rennie, A. & Ghazy, M., 22/05/2023, In: Designs. 7, 3, 18 p., 68.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A novel condition monitoring and real-time simulation system for wind turbines
Ma, X. & Cross, P., 4/02/2013, Proceedings of EWEA 2013 - European Wind Energy Conference & Exhibition. Vienna: EWEA, 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A novel concept to develop composite structures with isotropic negative Poisson's ratio: effects of random inclusions
Hou, X., Hu, H. & Silberschmidt, V., 12/10/2012, In: Composites Science and Technology. 72, 15, p. 1848–1854 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A novel 3D composite structure with tunable Poisson's ratio and stiffness
Hou, X. & Hu, H., 07/2015, In: physica status solidi (b). 252, 7, p. 1565–1574 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A new two-step modeling strategy for random micro-fiber reinforced composites with consideration of primary pores
Cai, H., Ye, J., Shi, J., Wang, Y., Shi, Y., Huang, B., Xu, Y., Saafi, M. & Ye, J., 8/02/2022, In: Composites Science and Technology. 218, 19 p., 109122.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A new fictitious time for the dynamic relaxation (DXDR) method
Kadkhodayan, A., Alamatian, J. & Turvey, G. J., 7/05/2008, In: International Journal for Numerical Methods in Engineering. 74, 6, p. 996-1018 23 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A new design concept for milling tools of spherical surfaces obtained by kinematic generation
Neagu, C., Lupeanu, M. & Rennie, A., 1/05/2013, In: Applied Mathematical Modelling. 37, 9, p. 6119-6134 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A new boundary element approach of modeling singular stress fields of plane V-notch problems
Niu, Z., Cheng, C., Ye, J. & Recho, N., 1/08/2009, In: International Journal of Solids and Structures. 46, 16, p. 2999-3008 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A new approach for the bending problem of shallow shell by the boundary element method
Ye, J., 10/1988, In: Applied Mathematical Modelling. 12, 5, p. 467-470 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A multi-scale model for studying failure mechanisms of composite wind turbine blades
Ye, J., Chu, C., Cai, H., Hou, X., Shi, B., Tian, S., Chen, X. & Ye, J., 15/03/2019, In: Composite Structures. 212, p. 220-229 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A model for predicting smoke back-layering length in tunnel fires with the combination of longitudinal ventilation and point extraction ventilation in the roof
Wang, J., Yuan, J., Fang, Z., Tang, Z., Qian, P. & Ye, J., 1/10/2018, In: Tunnelling and Underground Space Technology. 80, p. 16-25 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A micromechanics and machine learning coupled approach for failure prediction of unidirectional CFRP composites under triaxial loading: A preliminary study
Chen, J., Wan, L., Ismail, Y., Ye, J. & Yang, D., 1/07/2021, In: Composite Structures. 267, 14 p., 113876.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A method and model for pulsed laser cleaning of rapid manufactured parts
Pinkerton, A. J. & Li, K., 2007, Proceedings of the 21st International Conference on Surface Modification Technologies. Sudarshan, T. S. & Jeandin, M. (eds.). ASM International
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A method and model for deposition of TI-6Al-4V with controlled porosity
Ahsan, M. N. & Pinkerton, A. J., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 462-471 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A literature review on the technologies of bonded hoses for marine applications
Amaechi, C. V., Wang, F., Ja'e, I. A., Aboshio, A., Odijie, A. C. & Ye, J., 31/12/2022, In: Ships and Offshore Structures. 17, 12, p. 2819-2850 32 p.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
A literature review on the linear elastic material properties assigned in finite element analyses in dental research
Celik, H. K., Koc, S., Kustarci, A. & Rennie, A., 31/03/2022, In: MATERIALS TODAY COMMUNICATIONS. 30, 10 p., 103087.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A GPGPU accelerated compressed sensing with tight wavelet frame transform technique for MR imaging reconstruction
Hu, B., Ma, X., Joyce, M., Glover, P. & Naleem, B., 2012, Imaging Systems and Techniques (IST), 2012 IEEE International Conference on. IEEE, p. 121-125 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A genetic evolved machine learning approach for 3D DEM modelling of anisotropic materials with full consideration of particulate interactions
Gu, Z., Ding, X., Hou, X. & Ye, J., 1/02/2023, In: Composites Part B: Engineering. 250, 11 p., 110432.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A gas-free powder delivery system for 100% deposition efficiency in Direct Laser Deposition
Wang, W., Pinkerton, A. J. & Li, L., 2008, Proceedings of the 27th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 415-423 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A feasibility study into the use of wavelet transform in partial discharge analysis.
Ma, X., Zhou, C. & Kemp, I. J., 09/2000. 5 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
A fast interpolation approach for the calculation of permittivity and conductivity to estimate the SAR
Priyadarshi, S., Pitman, S., Glover, P., Shah, S., Ye, J., Hu, B. & Letizia, R., 8/12/2014, RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-Bio), 2014 IEEE MTT-S International Microwave Workshop Series on. IEEE, p. 261-266 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A DXDR large deflection analysis of uniformly loaded square, circular and elliptical orthotropic plates using non-uniform rectangular finite-differences
Kadkhodayan, M., Alamatian, J., Turvey, G. & Erfani Moghadam, A., 10/2012, In: Journal of Mechanical Science and Technology. 26, 10, p. 3231-3242 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A digital method for the discrimination of neutrons and γ rays with organic scintillation detectors using frequency gradient analysis.
Liu, G., Joyce, M. J., Ma, X. & Aspinall, M., 06/2010, In: IEEE Transactions on Nuclear Science. 57, 3, p. 1682 -1691
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A DEM model for visualising damage evolution and predicting failure envelope of composite laminae under biaxial loads
Ismail, Y., Yang, D. & Ye, J., 1/10/2016, In: Composites Part B: Engineering. 102, p. 9-28 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
A DEM for visualising damage evolution and predicting failure of composite lamina under uniaxial and biaxial loads
Ismail, Y., 2017, (Unpublished) Lancaster University. 177 p.
Research output: Thesis › Doctoral Thesis
Published
A coupled approach to weld pool, phase and residual stress modelling of laser direct metal deposition (LDMD) processes
Vogel, M., Khan, M., Ibarra-Medina, J., Pinkerton, A., N'Dri, N. & Megahed, M., 2013, 2nd World Congress on Integrated Computational Materials Engineering. Li, M., Campbell, C., Thornton, K., Holm, E. & Gumbsch, P. (eds.). Wiley, p. 231-236 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A Computer Aided Design (CAD) support tool for parametric design of products for Rapid Manufacture (RM)
Smith, P. & Rennie, A., 10/2009, 4th International Conference on Advanced Research in Virtual and Rapid Prototyping: Proceedings of the . Leiria, Portugal: Taylor & Francis Group, p. 95-100 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns.
Turvey, G. & Zhang, Y., 09/2006, In: Computers and Structures. 84, 22-23, p. 1527-1537 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Comprehensive Business Model for Rapid Manufactured Products
Hasan, S. & Rennie, A., 10/2008, 19th International Symposium of the Danube-Adria-Association-for-Automation-and-Manufacturing - Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions. Vienna: DAAAM International, p. 591-592 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparison of the manufacture and mechanical performance of porous aluminium and aluminium syntactic foams made by vacuum-assisted casting
Cheneler, D. & Kennedy, A. R., 3/07/2020, In: Materials Science and Engineering A. 789, 9 p., 139527.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparison of laser additive manufacturing using gas and plasma-atomized Ti-6A1-4V powders
Ahsan, M. N., Pinkerton, A. J. & Ali, L., 2012, Innovative Developments in Virtual and Physical Prototyping. Bartolo, P., DeLemos, A., Tojeira, A., Pereira, A., Mateus, A., Mendes, A., DosSantos, C., Freitas, D., Bartolo, H., Almeida, H., IM, D., Dias, J., Domingos, M., Alves, N., Pereira, R., Patricio, T. & Ferreira, T. (eds.). Boca Raton: CRC PRESS-TAYLOR & FRANCIS GROUP, p. 625-633 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparison of cut path deviation with continuous and pulsed beam modes in diode laser chip-free cutting of glass
Nisar, S., Li, L., Sheikh, M. A. & Pinkerton, A. J., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 1070-1079 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Unpublished
A Comparison of Carbon Footprint Calculations for End of Life Product Recovery Methods using PAS 2050
Appleby, M., Lambert, C. & Rennie, A., 12/2009, (Unpublished). 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
A comparison of carbon footprint calculations for end of life product recovery methods using PAS 2050
Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2010, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis: (ESDA 2010). ASME, 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping
Syed, W. U. H., Pinkerton, A. J. & Li, L., 2005, In: Applied Surface Science. 247, 1-4, p. 268-276 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparative study of single mode fibre laser and Nd:YAG laser welding of Ti-6Al-4V
Chen, H.-C., Blackburn, J., Pinkerton, A. J., Li, L. & Hilton, P., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 163-168 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparative study of multiple layer laser deposition using water and gas atomised 316L stainless steel powders
Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti-6Al-4V powders
Ahsan, M. N., Pinkerton, A. J., Moat, R. J. & Shackleton, J., 25/09/2011, In: Materials Science and Engineering: A. 528, 25-26, p. 7648-7657 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A CFD model of the laser, coaxial powder stream and substrate interaction in laser cladding
Ibarra-Medina, J. & Pinkerton, A. J., 2010, In: Physics Procedia. 5, B, p. 337-346 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A CFD model of laser cladding: From deposition head to melt pool dynamics
Ibarra-Medina, J., Vogel, M. & Pinkerton, A. J., 2011, Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 378-386 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A biomechanical study comparing a raft of 3.5 mm cortical screws with 6.5 mm cancellous screws in depressed tibial plateau fractures
Patil, S., Mahon, A., Green, S., McMurtry, I. & Port, A., 06/2006, In: Knee. 13, 3, p. 231-235 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A BIOMECHANICAL COMPARISON OF DIFFERENT SCREW CONFIGURATIONS IN DISTAL TIBIAL LOCKING PLATES
Bonner, T. J., Green, S. M. & McMurty, I. A., 1/04/2012, In: Journal of Bone and Joint Surgery, British Volume. 94-B, SUPP XXXV, p. 20 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
A Basic Design-Build-Test Experience: Model Wind Turbine using Additive Manufacture
Widden, M., Rennie, A., Quayle, S. & Gunn, K., 23/06/2011, Conference proceedings 7th International CDIO Conference, Technical University of Denmark, 20th – 22nd June 2011. Technical University of Denmark, p. 1039-1048 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A 3D inverse finite element technique applied to experimental magnetic induction tomography data.
Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X., 09/2005. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
A 2D Electromechanical Model of Human Atrial Tissue Using the Discrete Element Method
Brocklehurst, P., Adeniran, I., Yang, D., Sheng, Y., Zhang, H. & Ye, J., 25/10/2015, In: Biomed Research International. 2015, 13 p., 854953.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A 2D electro-mechanical model of human atrial tissue using the discrete element method
Brocklehurst, P., Adeniran, I., Yang, D., Sheng, Y., Zhang, H. & Ye, J., 2015, In: Biomed Research International. 2015, 12 p., 854953.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
3D printed facial laser scans for the production of localised radiotherapy treatment masks
Briggs, M., Clements, H., Wynne, N., Rennie, A. E. W. & Kellett, D., 10/2016, In: Journal of Visual Communication in Medicine. 39, 3-4, p. 99-104 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
3D analysis of stress transfer in the micromechanics of fiber reinforced composites by using an eigen-function expansion method
Wu, Z. J., Ye, J. Q. & Cabrera, J. G., 05/2000, In: Journal of the Mechanics and Physics of Solids. 48, 5, p. 1037-1063 27 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
2D finite element analysis of thermally bonded nonwoven materials: continuous and discontinuous models
Hou, X., Acar, M. & Silberschmidt, V., 09/2009, In: Computational Materials Science. 46, 3, p. 700–707 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
2D bio-based nanomaterial as a green route to amplify the formation of hydrate phases of cement composites: Atomistic simulations and analytical characterization
Chi, Y., Huang, B., Saafi, M., Fullwood, N., Lambert, C., Whale, E., Hepworth, D. & Ye, J., 13/09/2021, In: Construction and Building Materials. 299, 23 p., 123867.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...6 7 8 9 10 11 Next

Research

Manufacturing

Quick Links

Connect With Us