Home > Research > Structures, Materials and Manufacturing > Publications & Outputs

Research

View graph of relations

Structures, Materials and Manufacturing

301 - 400 out of 967Page size: 100
RSS feed of this list
Sort by: Type
  1. Conference paper
  2. Published

    Delivering Regional Eco-Innovation through Knowledge Exchange

    Lambert, C. & Rennie, A., 25/10/2011. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  3. Published

    Pultruded GFRP continuus beams - comparison of flexural test data with analysis predictions

    Turvey, G., 6/09/2011, p. 470-481.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  4. Published

    Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve

    Celik, H. K., Rennie, A., Karayel, D. & Akinci, I., 09/2011, p. 59. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  5. Published

    Online intelligent condition monitoring of electrical machines.

    Ma, X., 05/2011, p. 223-228. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  6. Published

    Selective laser melting for near net-shape manufacturing: Investigation into structure-parameter relationships and phase determination by X-ray diffraction in stainless steel alloy systems

    Green, S., OMeara, N. & Rennie, A., 2011. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  7. Published

    Cross-stiffened circular plates: an elasto-plastic large deflection analysis

    Turvey, G., 14/09/2010.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  8. Published

    Effects of bonded splice joints on the flexural response of pultruded fibre reinforced polymer beams

    Turvey, G., 7/09/2010. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  9. Published

    Analysis of existing Additive manufacturing material selectors

    Hambali, R. H. & Rennie, A., 06/2010. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  10. Published

    Motivation of engineering students-considerations for programme design

    Green, S. & Meyer, JRF., 2010, p. P062. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  11. Published

    Rapid manufacturing complex geometries for high-power microwave applications

    Seviour, R., Rennie, A. & Celik, H. K., 12/2009.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  12. Published

    An experimental investigation of bolt pull-through in pultruded GRP plate

    Turvey, G., 1/09/2009, p. 462-472. 11 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  13. Published

    Failure of pultruded GRP angle leg junctions in tension

    Turvey, G. & Wang, P., 27/07/2009. 11 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  14. Published

    Development of a Motion Tracking 3D CAD Input System

    Abram, T., Benachour, P. & Vuong, T., 12/06/2009, p. 109-116. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  15. Published

    Control systems for WRASPA.

    Chaplin, R., Rahmati, R., Gunura, K., Ma, X. & Aggidis, G. A., 06/2009. 93 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  16. Published

    An interactive PC-based electrical power system simulator for engineering education.

    Ma, X., Taylor, C. J. & Joyce, M. J., 2009.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  17. Published

    X-band crab cavities for the CLIC beam delivery system

    Burt, G., Ambattu, P., Dexter, A., Abram, T., Dolgashev, V., Tantawi, S. & Jones, R. M., 1/12/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  18. Published

    Buckling of CFRP stiffened GRP flanges

    Amal Afifi, 22/07/2008. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  19. Published

    Bending of tip-loaded CFRP stiffened pultruded GRP cantilevers: comparison between theory and experiment

    Turvey, G., 2/06/2008. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  20. Published

    Developments of multiple frequency electromagnetic induction system for steel flow visualization.

    Ma, X., Peyton, A. J., Higson, S. R. & Drake, P., 09/2007. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  21. Published

    Linear EMT for the detection of faults in metallic planar structures (DIF).

    Yin, W., Ma, X., Zysko, G. & Peyton, A. J., 09/2007. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  22. Published

    Dynamic magnetic induction tomography imaging of molten metal flow using the Kalman filter.

    Soleimani, M., Ma, X. & Peyton, A. J., 09/2007. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  23. Published

    Effect of hole clearance on bolt loads in pultruded GRP tension joints

    Turvey, G. & Wang, P., 8/07/2007. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  24. Published

    Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener

    Turvey, G. & Salehi, M., 26/06/2007. 27 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  25. Published

    Opening mode failure of pultruded GRP angle leg junctions

    Turvey, G. & Zhang, Y., 30/04/2007, p. 389-393. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  26. Published

    Wear performance of silastic prostheses tested on a novel metatarsophalangeal joint simulator

    Green, S., Lee, S., Joyce, T. & Unsworth, A., 2006, p. 35. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  27. Published

    Design and development of a novel multistation MTP joint simulator for in vitro testing

    Green, S., Lee, S., Joyce, T. & Unsworth, A., 2006, p. P137.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  28. Published

    Development of a fast electromagnetic induction tomography system for metal process applications.

    Ma, X., Higson, S. R., Lyons, A. & Peyton, A. J., 09/2005. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  29. Published

    A 3D inverse finite element technique applied to experimental magnetic induction tomography data.

    Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X., 09/2005. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  30. Published

    Magnetic induction tomography : image reconstruction on experimental data from various applications.

    Soleimani, M., Ktistis, C., Ma, X., Yin, W., Lionheart, W. R. B. & Peyton, A. J., 06/2005. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  31. Published

    Alternative nozzle and metal delivery methods for laser-assisted metal deposition: (invited paper & presentation)

    Pinkerton, A. J., 2005.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  32. Published

    Imaging the flow profile of molten steel through a submerged pouring nozzle.

    Ma, X., Peyton, A. J., Binns, R. & Higson, S. R., 09/2003. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  33. Published

    Development of a virtual instrument system for industrial process tomography.

    Deloughry, R., Davenport, I., Ma, X. & Ponnapalli, P. V. S., 09/2003. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  34. Published

    Image reconstruction in 3D magnetic induction tomography using a FEM forward model.

    Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X., 09/2003. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  35. Published

    Optimal algorithms for wavelet-based denoising in PD measurement.

    Zhou, C., Ma, X. & Kemp, I. J., 08/2003. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  36. Published

    Ion beam modification of Ti6Al4V alloy for TJR

    Green, S., Boampong, D. K. & Unsworth, A., 2002, p. L68.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  37. Published

    Direct laser deposition layer profiles and the factors affecting them

    Pinkerton, A. J. & Li, L., 2002.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  38. Published

    Restrained creep of CMW2000 Bone Cement

    Green, S., Liu, C., Watkins, N. D., McCaskie, A. W. & Gregg, P. J., 2002, p. T84. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  39. Published

    The morphology of UHMWPE wear debris released from shoulder prostheses

    Green, S., Elfick, A. P., Frostick, S. P. & Unsworth, A., 2002, p. 105. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  40. Published

    The Fabrication of MMC Electronic Packages using Thin Shell Electroformed (TSE) EDM Electrodes

    Bocking, C., Jacobson, D. M., Rennie, A. & Bennett, G., 10/2001. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  41. Published

    A feasibility study into the use of wavelet transform in partial discharge analysis.

    Ma, X., Zhou, C. & Kemp, I. J., 09/2000. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  42. Poster
  43. Published

    Manufacturing of engineered novel additive manufactured polymer material from phase-field

    Adefuye, E., Hou, X. & Ye, J., 1/04/2022.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  44. Published

    Development of novel Composite Riser for Offshore Deep Water Applications & Hydrodynamics

    Amaechi, C. V. & Ye, J., 16/04/2021.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  45. Published

    Novel Composite Riser Development for Offshore Deep Water Applications

    Amaechi, C. V. & Ye, J., 17/12/2019.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  46. Published

    Underwater Cutting of Metals with Photons

    Cheneler, D., Pinkerton, A., Khan, A. & Nyamayaro, C., 3/07/2018.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  47. Published

    Modeling and Characterization of Novel Deepwater Marine Risers

    Amaechi, C. V. & Ye, J., 6/05/2017.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  48. Published

    Characterization Behaviour of Novel Composite Deepwater Risers

    Amaechi, C. V. & Ye, J., 20/12/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  49. Published

    Modelling and Characterization of Novel Deepwater Composite Risers

    Amaechi, C. V. & Ye, J., 28/06/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  50. Published

    Composite Risers – an offshore deepwater solution

    Amaechi, C. V. & Ye, J., 7/05/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  51. Published

    Numerical Modeling of Oil/Gas Flow in Pipes in Deep Sea

    Amaechi, C. V. & Ye, J., 15/12/2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  52. Published

    Developing novel structural composites from recycled materials

    Sotayo, A., Green, S. & Turvey, G., 16/12/2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  53. Unpublished

    Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing

    Hasib, H., Rennie, A., Burns, N. & Geekie, L., 12/2014, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  54. Unpublished

    Additive manufacturing in assistive product design development

    Sembiring, E., Rennie, A. & Laha, S., 12/2014, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  55. Unpublished

    Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM

    Lupeanu, M., Rennie, A. & Neagu, C., 31/03/2014, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  56. Published

    Numerical validation and dynamic study of inflatable offshore barrier structures under impact loading

    Aboshio, A., Ye, J. & Green, S., 17/09/2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  57. Published

    How additive manufacturing helps in reducing power consumption in pumps

    Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 9/08/2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  58. Unpublished

    Production of fluid dynamically improved filters using additive manufacturing

    Vijayakumar, B., Rennie, A. & Burns, N., 18/12/2012, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  59. Unpublished

    Photography and Cloud Computing enabled Replication of Historic Artefacts for fabrication via Additive Manufacturing Technology

    Kaufman, J. & Rennie, A., 18/12/2012, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  60. Published

    Optimisation of build orientation for FDM additive manufactured products

    Hambali, R. H., Vaudelin, M. & Rennie, A., 06/2011.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  61. Unpublished

    A Comparison of Carbon Footprint Calculations for End of Life Product Recovery Methods using PAS 2050

    Appleby, M., Lambert, C. & Rennie, A., 12/2009, (Unpublished). 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  62. Unpublished

    Rapid Manufacturing Design Tools

    Smith, P. & Rennie, A., 12/2008, (Unpublished). 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  63. Unpublished

    The SME Carbon Game: Issues faced when developing a Carbon Footprint Toolkit for SMEs

    wrigley, S., Lambert, C. & Rennie, A., 06/2008, (Unpublished). 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  64. Published

    Encouraging Environmental Responsibility in Small Businesses

    Moss, J., Lambert, C. & Rennie, A., 06/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  65. Unpublished

    Rapid Manufacturing Design Scenarios

    Smith, P. & Rennie, A., 12/2007, (Unpublished). 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  66. Published

    Laser rapid manufacturing process advancement through powder morphology

    Pinkerton, A. J., 2002.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  67. Abstract
  68. Published

    Modelling Composite Failure through Machine Learning

    Ding, X., Hou, X., Xia, M., Ismail, Y. & Ye, J., 1/09/2020.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  69. Published

    Maximising open area whilst retaining strength in novel metal additive manufactured filter media

    Burns, N., Burns, M., Travis, D., Geekie, L., Hasib, H. & Rennie, A., 10/2014. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  70. Published

    Design, innovation and a new age for filtration

    Burns, N., Geekie, L., Travis, D., Burns, M. & Rennie, A., 06/2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  71. Published

    The development of an innovative SME-focused toolset integrating carbon footprint calculation with lean manufacturing waste reduction techniques

    Wrigley, S., Lambert, C. & Rennie, A., 08/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  72. Published

    Comparing Carbon Footprint Methodologies for SMEs

    Moss, J., Lambert, C. & Rennie, A., 08/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  73. Published

    Delivering eco design business support to SMEs on a transnational scale: benefits and learning outcomes

    Lambert, C., Rennie, A., Baker, N. & Hjelm, O., 7/11/2007. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  74. Published

    Wear evaluation of retrieved, failed uncemented UHMWPE prostheses

    Green, S., Mahomed, A., Cloke, D. J., Chuter, G. S. J. & Partington, P. F., 2006, p. T95. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  75. Other
  76. Published

    Sensitivity Studies on Offshore Submarine Hoses on CALM Buoy with Comparisons for Chinese‑Lantern and Lazy‑S Configuration: OMAE2019‑96755

    Wang, F., Amaechi, C. V., Hou, X. & Ye, J., 10/06/2019.

    Research output: Contribution to conference - Without ISBN/ISSN › Other › peer-review

  77. Unpublished

    How to keep it in for longer: innovation in the Critical Care Unit

    Laha, S. & Rennie, A., 6/11/2013, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Other

  78. Speech
  79. Published

    Application of inflatable structures in offshore security

    Aboshio, A., Green, S. & Ye, J., 17/12/2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Speech

  80. Published

    SME expectations and experiences

    Seward, D., Quayle, S., Rennie, A. & Taylor, S., 2005. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Speech

  81. Article
  82. Published

    The lost crown of Horus

    Kaufman, J. & Rennie, A. E. W., 04/2015, Ancient Egypt, 15, 5, p. 22-23 2 p.

    Research output: Contribution to specialist publication › Article

  83. Published

    Touching history: 3D replica artifacts

    Kaufman, J. & Rennie, A., 12/2014, Ancient Egypt, 15, 3, p. 32-33 2 p.

    Research output: Contribution to specialist publication › Article

  84. Featured article
  85. Published

    University collaboration improves Mimic condition monitoring

    Ma, X. & Briddon, M., 23/09/2015, The Motorship Magazine - insight for marine technology professionals.

    Research output: Contribution to specialist publication › Featured article

  86. Doctoral Thesis
  87. Published

    Novel Design, Hydrodynamics and Mechanics of Marine Hoses in Oil/Gas Applications

    Amaechi, C. V., 30/09/2022, Lancaster University.

    Research output: Thesis › Doctoral Thesis

  88. Unpublished

    Design and fabrication of novel, geometrically optimised conical inline filters/strainers for use in the process industries.

    Vijayakumar, B., 7/10/2020, (Unpublished) Lancaster University. 308 p.

    Research output: Thesis › Doctoral Thesis

  89. Published

    Development of a novel feature based manufacturability assessment system for high-volume injection moulding tool inserts

    El Kashouty, M., 2020, Lancaster University.

    Research output: Thesis › Doctoral Thesis

  90. Published

    Engineered novel multifunctional hybrid nanofiber reinforcement for improving the flexural strength and fracture of cementitious composites for sustainable concrete

    Hasan, H., 2019, Lancaster University. 286 p.

    Research output: Thesis › Doctoral Thesis

  91. Published

    Replication and fabrication of crafted and natural artifacts by reverse engineering using single camera photogrammetry

    Kaufman, J., 2018, Lancaster University. 486 p.

    Research output: Thesis › Doctoral Thesis

  92. Unpublished

    A DEM for visualising damage evolution and predicting failure of composite lamina under uniaxial and biaxial loads

    Ismail, Y., 2017, (Unpublished) Lancaster University. 177 p.

    Research output: Thesis › Doctoral Thesis

  93. Unpublished

    Development and characterisation of novel structural composites from recycled materials

    Sotayo, A., 2016, (Unpublished) Lancaster University. 263 p.

    Research output: Thesis › Doctoral Thesis

  94. Published

    Design of paired column semisubmersible hull

    Odijie, C., 2016, Lancaster University. 205 p.

    Research output: Thesis › Doctoral Thesis

  95. Other contribution
  96. Published

    Ode to a Grecian replica: on simplifying accurate copies of fragile antiquities

    Glausiusz, J. & Kaufman, J., 2014, 2 p. Washington DC USA : Phi Beta Kappa Society.

    Research output: Other contribution

  97. Published

    Advances and challenges in the modelling of laser melt pool processes: Keynote presentation at the Interfinish SERIA 2013 Asia-Pacific International Conference on Surface Engineering for Research and Industrial Applications

    Pinkerton, A., 2013

    Research output: Other contribution

  98. Published

    Injection mould tool manufacture in less than five days

    Jacobson, D., Bocking, C. & Rennie, A. E. W., 1/06/2002, 9 p. Society of Manufacturing Engineers.

    Research output: Other contribution

  99. Patent
  100. Published

    Improved Tracheostomy Device

    Laha, S., Adiele, A. C., Brewer, D., Ntelis, T., Pitman, S., Rennie, A. & Sheikh, Y., 8/11/2018, IPC No. A61M 16/04 (2006.01), Patent No. PCT/GB2018/051193, 3/05/2018, Priority date 3/05/2017, Priority No. 1707060.8

    Research output: Patent

  101. Published

    Electromagnetic detection system

    Lionheart, W. R. B., Ma, X. & Peyton, A. J., 2008, Patent No. WO2008087385-A2; EP2108132-A2; GB2459790-A; CA2675587-A1; WO2008087385-A3; WO2008087385-A8; CN101688925-A; US2010207624-A

    Research output: Patent

  102. Journal article
  103. Published

    Structural strength analysis of a rotary drum mower during harvesting

    Celik, H. K., Akinci, I., Caglayan, N. & Rennie, A., 16/02/2024, In: Journal of Agricultural Engineering. 55, 1, 23 p., 1557.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  104. Published

    Evaluation of stress distribution on an endodontically treated maxillary central tooth with lesion restored with different crown materials: A finite element analysis

    Kirmali, O., Icen, G., Celik, H. K. & Rennie, A., 15/02/2024, In: Heliyon. 10, 3, 10 p., e25829.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  105. Published

    Structural Strength Analysis of a Rotary Drum Mower in Transportation Position

    Celik, H. K., Akinci, I., Caglayan, N. & Rennie, A., 16/10/2023, In: Applied Sciences. 13, 20, 18 p., 11338.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  106. Published

    Dynamic splitting behavior of ultra-lightweight cement composite with rubber and polyethylene fiber

    Huang, Z., Pan, W., Du, S., Zhou, Y. & Ye, J., 5/10/2023, In: Construction and Building Materials. 399, 132577.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  107. Published

    Effects of defects on the transverse mechanical response of unidirectional fibre-reinforced polymers: DEM simulation and deep learning prediction

    Ding, X., Gu, Z., Hou, X., Xia, M., Ismail, Y. & Ye, J., 1/10/2023, In: Composite Structures. 321, 117301.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  108. Published

    State-of-the-art review of composite marine risers for floating and fixed platforms in deep seas

    Amaechi, C. V., Reda, A., Shahin, M. A., Sultan, I. A., Beddu, S. B. & Ja'e, I. A., 30/09/2023, In: Applied Ocean Research. 138, 18 p., 103624.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  109. Published

    Case study for effects of pile installation on existing offshore facilities in brownfields

    Reda, A., Amaechi, C. V. & Shahin, M. A., 30/09/2023, In: Applied Ocean Research. 138, 103651.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  110. Published

    Necessity and suitability of in-line inspection for corrosion resistant alloy (CRA) clad pipelines

    Reda, A., Shanin, M. A., Sultan, I. A., Amaechi, C. V. & McKee, K. K., 2/09/2023, In: Ships and Offshore Structures. 18, 9, p. 1360-1366 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  111. Published

    A Numerical Method-Based Analysis of the Structural Deformation Behaviour of a Turkish String Instrument (Cura Baglama) under Varying String Tensions

    Celik, H. K., Gok, S., Caglayan, N. & Rennie, A., 27/08/2023, In: Applied Sciences. 13, 17, 15 p., 9682.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 3 4 5 6 7 8 ...10 Next

Back to top