Structures, Materials and Manufacturing

View graph of relations

201 - 300 out of 969Page size: 100

10
25
50
100
500
All

RSS feed of this list

Sort by: Type

Conference contribution/Paper
Published
Direct diode laser deposition of functionally graded Ti-6AL-4V and inconel 718 components
Shah, K., Pinkerton, A. J., Moat, R., Li, L. & Preuss, M., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 273-278 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Direct laser deposited titanium with controlled porosity for bone tissue engineering
Pinkerton, A. J., Paul, C. P., Iravani-Tabrizipoor, M., Kukreja, L. M. & Khajepour, A., 2008, Proceedings of the 27th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 421-430 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A gas-free powder delivery system for 100% deposition efficiency in Direct Laser Deposition
Wang, W., Pinkerton, A. J. & Li, L., 2008, Proceedings of the 27th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 415-423 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparative study of single mode fibre laser and Nd:YAG laser welding of Ti-6Al-4V
Chen, H-C., Blackburn, J., Pinkerton, A. J., Li, L. & Hilton, P., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 163-168 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A transnational approach to the implementation of eco-design methodologies in SMEs
Rennie, A., Lambert, C., Baker, N. & Hjelm, O., 10/07/2007, The proceedings of the 5th International Conference on Design & Manufacture for Sustainable Development : Loughborough University, 10th - 11th July 2007.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Stress distributions in multilayer laser deposited Waspaloy parts measured using neutron diffraction
Moat, R. J., Pinkerton, A. J., Hughes, D. J., Li, L., Withers, P. J. & Preuss, M., 2007, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Intragranular precipitation variations in laser deposited Waspaloy due to compositional inhomogeneities
Moat, R. J., Karadge, M., Pinkerton, A. J., Deschamps, A., Bley, F., Li, L., Withers, P. J. & Preuss, M., 2007, Proceedings of the 136th TMS Annual Meeting. The Minerals, Metals & Materials Society (TMS), p. 77-86 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An anisotropic enhanced thermal conductivity approach for modelling laser melt pools
Safdar, S., Pinkerton, A. J., Moat, R., Li, L., Sheikh, M. A., Preuss, M. & Withers, P. J., 2007, Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A verified model of laser direct metal deposition using an analytical enthalpy balance method
Pinkerton, A. J., Moat, R., Shah, K., Li, L., Preuss, M. & Withers, P. J., 2007, Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A method and model for pulsed laser cleaning of rapid manufactured parts
Pinkerton, A. J. & Li, K., 2007, Proceedings of the 21st International Conference on Surface Modification Technologies. Sudarshan, T. S. & Jeandin, M. (eds.). ASM International
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
From art to engineering
O'Hana, S., Pinkerton, A. J. & Shoba, K., 2007, Proceedings of the 21st International Conference on Surface Modification Technologies. Sudarshan, T. S. & Jeandin, M. (eds.). ASM International
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Component repair using laser direct metal deposition
Wang, W., Pinkerton, A. J., Wee, L. M. & Li, L., 2007, Proceedings of the 35th International MATADOR Conference. Hinduja, S. & Fan, KC. (eds.). London: Springer Verlag, p. 345-350 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
In vitro wear performance of MTP prostheses evaluated on a multi-station metatarso-phalangeal joint simulator
Green, S., Joyce, T., Lee, S. & Unsworth, A., 2007, Proceedings 8th EFORT Congress. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology, p. F837
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Cement pressurisation in flanged and unflanged acetabular cups
Green, S., Attar, F. G., Bhattacharya, R. & Port, A., 2007, Proceedings 8th EFORT Congress, Florence, Italy. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology, p. P486
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Wear analysis of failed acetabular polyethylene: A comparison of analytical methods
Green, S., Chuter, G. S. J., Cloke, D. J., Mohamed, A. & Partington, P. F., 2007, Proceedings 8th EFORT Congress, Florence. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Fixation strength of cemented Birmingham (HA coated, cementless) cups - a biomechanical study
Green, S., Kadakia, A. & Partington, P. F., 2007, Proceedings 8th EFORT congress, Florence, Italy. European Federation of National Associations of Orthopaedics and Traumatology
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Lancaster Virtual Prototyping Project: (GONW5167/8EUR – M4-07-LANC)
Rennie, A. E. W., 15/11/2006, Proceedings of the 4th EU Best Practice Conference: New Horizons in Graz..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Finite element modelung of semi-rigid composite joints with precast hollow core slabs
Lam, D., Ye, J. Q. & Fu, F., 2006, 8th International Conference on Steel-Concrete Composite and Hybrid Structures, Proceedings. Harbin, China: HARBIN INSTITUTE TECHNOLOGY PUBLISHERS, p. 426-433 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Flexural performance of concrete slabs reinforced with GFRP and subjected to different thermal histories.
El-zaroug, O., Forth, J., Ye, J. & Beeby, A., 2006, 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures. Patras, Greece: University of Patras
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Strengthening ductile metallic structures using externall bonded fibre reinforced composite materials
Anapolitanos, I., Lam, D. & Ye, J., 2006, Steel and Aluminium Structures, ICSAS'07: Proceedings of the Sixth International Conference on Steel and Aluminium Structures . Beale, R. G. (ed.). Oxford: Oxford Brookes University
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Accuracy of design sensitivity for optimization of structural using small strain theory by finite element method
Bhagate, K. A., Pawar, P., Singh, A. K. & Ye, J., 2006, III European Conference on Computational Mechanics : Solids, Structures and Coupled Problems in Engineering: Book of Abstracts. Motasoares, C. A., Martins, J. A. C., Rodrigues, H. C., Ambrósio, J. A. C., Pina, C. A. B., Motasoares, C. M., Pereira, E. B. R. & Folgado, J. (eds.). Berlin: Springer, p. 711-711 1 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The effect of powder recycling in direct metal laser deposition on powder and manufactured part characteristics
Carroll, P. A., Pinkerton, A. J., Allen, J., Syed, W. U. H., Sezer, H. K., Brown, P., Ng, G., Scudamore, R. & Li, L., 2006, Proceedings of AVT-139 Specialists Meeting on Cost Effective Manufacture via Net Shape Processing. NATO Research and Technology Organisation
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Diode laser metal deposition: The effect of pulsed beam parameters on superalloy microstructure and deposit morphology
Pinkerton, A. J., Moat, R. J., Li, L., Preuss, M. & Withers, P., 2006, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An analytical model of the combined powder-wire deposition process
Pinkerton, A. J., Syed, W. U. H. & Li, L., 2006, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The effect of process parameters on residual stresses within an inconel 718 part produced by the Direct Laser Deposition process
Pinkerton, A. J., Shackleton, J., Moat, R., Li, L., Withers, P., Preuss, M., Allen, J., Hilton, P. & Folwell, R., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 601-610 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Single-step graded surface coating using combined wire and powder feeding laser cladding
Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 787-795 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Explaining microstructural and physical variations in rapid additive manufactured waspaloy parts through the laser-deposition thermal cycle
Pinkerton, A. J., Syed, W. U. H., Karadge, M. & Li, L., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 822-831 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Statistical analysis of the effect of processing conditions on powder catchment efficiency in the Direct Laser Deposition (DLD) process
Syed, W. U. H., Pinkerton, A. J., Li, L., Al-Eid, E. & Pan, J., 2005, Virtual modeling and rapid manufacturing: advanced research in virtual and rapid prototyping. Bartolo, P. J., Mateus, A. J., Batista, F. C., Almeida, H. A., Vasco, J. C., Correia, M. A., Alves, N. F., Andre, N. C., Novo, P. P., Lima, P., Custodio, P. C., Martinho, P. G. & Carvolho, R. A. (eds.). London: Taylor and Francis, p. 361-367 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Non-linear Simulation of the Behavior of Integral Concrete-Filled Steel Tubular Framed Structures in Fire Conditions
Liu, S., Li, Y., Zha, X. & Ye, J., 2005, Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing. Topping, B. H. V. (ed.). Stirling: Civil-Comp press, p. 99-100 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Closed-form rigorous solution for the interfacial stress in plated beams using a two-stage method.
Yang, J. & Ye, J., 2005, Bond behaviour of FRP in structures : : proceedings of the International Symposium on Bond Behaviour of FRP in Structures, 7-9 December 2005, Hong Kong, China. Chen, J. F. & Teng, J. G. (eds.). International Institute for FRP in Construction
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An investigation on the stress transfer in concrete beams bonded with FRP plates
Ye, J. Q. & Yang, J., 2005, Bond Behaviour of FRP in Structures: Proceedings of the International Symposium BBFS 2005. Chen, JF. & Teng, JG. (eds.). HONG KONG: IIFC SECRETARIAT, p. 183-188 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The design & development of a simulator for in vitro testing of metatarsophalangeal prostheses
Joyce, T. J., Green, S. M. & Unsworth, A., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Polymeric biomaterial wear test rig validated to ASTM F732-00 and against clinical data
Joyce, T. J., Monk, D., Thompson, P., Chiu, P., Unsworth, A. & Green, S. M., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Influence of bovine serum lubricant changeover time on the wear of PTFE biomaterial against stainless steel
Joyce, T. J., Mendham, K., Green, S. M. & Unsworth, A., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The agglomeration of polyethylene particles in the cell culture environment
Elfick, A. P. D., Green, S. M., McCaskie, A. & Birch, M., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Stress transfer in cross-ply laminates with transverse cracks
Ye, J. & Yang, J., 2004, Computational Mechanics: Proceedings of the Sixth World Congress on Computational Mechanics in conjunction with the Second Asian-Pacific Congress on Computational Mechanics, September 5-10, 2004, Beijing, China . Yao, Z. H., Yuan, M. W. & Zhong, W. X. (eds.). Beijing: Tsinghua University Press & Springer-Verlag
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Diode laser deposition of microstructurally graded components using gas- and water-atomised powder blends
Pinkerton, A. J., Syed, W. U. H. & Li, L., 2004, Proceedings of the 23rd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Combined wire and powder feeding laser direct metal deposition for rapid prototyping
Syed, W. U. H., Pinkerton, A. J. & Li, L., 2004, Proceedings of the 23rd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The effect of diode laser beam shape and traverse direction on the direct metal deposition process
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Direct metal deposition by diode laser: modelling the effect of increased beam coupling
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Modelling the temperature effects of melt pool position and wall height in additive manufacturing by direct laser deposition
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 1st International Conference on Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J., Mitchell, G., Mateus, A., Batista, F., Vasco, J., Correia, M., Andre, N., Lima, P., Novo, P., Custodio, P. & Martinho, P. (eds.). Leiria: Escola Superior Tecnologia Gestao Leiria, p. 224-231 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Combined finite strip and beam elements for double tee slabs
Abou Ghadeer, M., Ye, J. & Mansouri, A. H., 2003, Proceedings of the Ninth International Conference on Civil and Structural Engineering Computing: Egmond-aan-Zee, the Netherlands, 2-4 September 2003 . Topping, B. H. V. (ed.). Stirling: Civil-Comp press
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Interactions between strip and beam elements of a hollow block slab system
Abou Ghadeer, M., Ye, J. Q. & Mansouri, A. H., 2003, Computational Fluid and Solid Mechanics 2003, Vols 1 and 2, Proceedings. Bathe, K. J. (ed.). Amsterdam: ELSEVIER SCIENCE PUBL B V, p. 42-46 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Injection Mould Tool Manufacture in Less Than Five Days
Jacobson, D. M., Bocking, C. E. & Rennie, A., 03/2002, RAPRA Rapid Tooling Conference 2002: Conference Proceedings. RAPRA, p. 35-43 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Migration of a cemented hip joint prosthesis within a novel composite femur
Green, S., Gregg, P., Liu, C., Watkins, N. D. & McCaskie, A. W., 2002, International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
AFM measurement of nanoscale topographical and material wear features
Green, S., Elfick, A. P. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/032
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The influence of radial clearance and wear testing on the tribology of alumina-alumina total hip prostheses
Green, S., Scholes, S. C. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/037
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Nanoscale wear degradation of alumina femoral head bearing surfaces assessed using an atomic force microscope
Green, S., Scholes, S. C. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/036
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
On the influence of protein adsorption to phagocytosis of model polyethylene particles
Green, S., Elfick, A. P., Birch, M. A. & McCaskie, A. W., 2002, International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. L27
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A verified model of the behaviour of the axial powder stream concentration from a coaxial laser cladding nozzle
Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparative study of multiple layer laser deposition using water and gas atomised 316L stainless steel powders
Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Study and applications of a Bounding Method in stability analysis of Stiffened composite aerospace panels
Ye, J., 2001, Solids, structures and coupled problems in engineering : : proceedings of the 2nd European Conference on Computational Mechanics 26-29 June 2001, Cracow Poland. Waszczyszyn, Z. & Pamin, J. (eds.). Cracow: Cracow University of Technology
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Electroforming of a Thermojet Master Pattern for use as an Electro-Discharge Machine Electrode
Bocking, C., Rennie, A., Bennett, G. & Lewis, N., 10/2000, Time Compression Technologies 2000 Conference: Proceedings of. Rapid News Publications PLC, p. 151-156 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Electroforming of a Stereolithography Master Pattern for use as an Electro-Discharge Machine electrode
Rennie, A., Bocking, C. E. & Bennett, G. R., 07/2000, Proceedings of the 33rd International MATADOR Conference: Formerly The International Machine Tool Design and Research Conference. Springer-Verlag, p. 301-306 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Edge effects in cross-ply laminated hollow cylindrical shells
Ye, J. Q., 2000, Computational techniques for materials, composites and composite structures. Topping, BHV. (ed.). Edinburgh: Civil-Comp press, p. 359-363 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The dependence of recovery behaviour on mechanical properties of bone cement
Green, S., Liu, C., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 2000, PIMS 2000 : 9th International Conference on Polymers in Medicine & Surgery, 11 - 13 September 2000, Danube University, Krems, Austria. London: IOM communications, p. 89
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Cytomcompatibility evaluation of surface modified Ni-Ti shape memory alloy using the MTT assay
Green, S., Grant, D. M. & Wood, J. V., 2000, Processing and fabrication of advanced materials VIII : proceedings of a symposium ... September 8-10, 1999, Mandarin Hotel, Orchard Road, Singapore . Khor, K. A. (ed.). Singapore: World Scientific Publishing, p. 141-148 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Comparative analysis of bone cement fracture surfaces
Green, S., Liu, C., Watkins, N. D. & McCaskie, A. W., 2000, 11th International Conference on Deformation, Yield and Fracture of Polymers : 10 - 13 April 2000, Churchill College, Cambridge, UK.. Cambridge : IOM communications, p. 325-328 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Non-linear FEM for RC shear wall structures
Shen, PS., Ye, J. & Cai, SB., 1999, Developments in Analysis & Design Using FEM: 7th Int. Conf. Civil. Struct. Eng., Oxford. Topping, B. H. V. & Kumar, B. (eds.). Stirling: Civil-Comp press, p. 181-186 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Interfacial effects On RC beams strengthened by bonded composite plates
Ye, J., 1999, Proceedings of the Second Asia Pacific Specialty Conference on Fiber Reinforced Concrete . Lok, T. S. & Tseng, K. (eds.). Singapore
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Decay rate of boundary effects in laminated composite cylinders and cylindrical panels.
Ye, J., 1998, Proceedings of the 1998 ASME Engineering Systems Design and Analysis (ESDA) Conference.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Development of a Continuous Droplet Generation System of Molten Metals using Electromotive Forces, with a View to its use in the Rapid Tooling Industry
Rennie, A. & Bennett, G. R., 07/1997, Proceedings of the Thirty-Second International Manufacturing, Automation and Systems, Technology, Applications, Design, Organisation and Management, Research (MATADOR) Conference. p. 399-403 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Vibration of laminated composite panels with intermediate point supports and clamped edges
Ye, J., 1997, Proceedings of the 2nd International Symposium on Structures and Foundations in Civil Engineering. Shen, C. K., Kuang, J. S. & Ng, C. W. W. (eds.). Hong Kong: Department of Civil and Structural Engineering, The Hong Kong University of Science and Technology, p. 103-108
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Axisymmetric vibration analysis of laminated hollow spheres composed of transversely isotropic layers
Ye, J. & Soldatos, K. P., 1996, Proceedings of the 1996 Engineering Systems Design and Analysis Conference. Sabir, A. B. (ed.). American Society of Mechanical Engineers
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
On three-dimensional buckling analysis of orthotropic cylinders
Soldatos, K. P. & Ye, J., 1995, Proceedings 15th Canadian Congress of Applied Mechanics CANCAM 95. Tabarrock, B. & Dost, S. (eds.).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Surface performance of a Ni-Ti shape memory alloy
Green, S., Grant, D. M. & Wood, J. V., 1995, Proceedings of SMST-94 : the First International Conference on Shape Memory and Superelastic Technologies, March 7-10, 1994, Asilomar Conference Center, Pacific Grove, California. Pelton, A. R., Hodgson, D. & Duerig, T. W. (eds.). Monterey, Calif.: Published under the aegis of the Organizing Committee of SMST-94, p. 91-96 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Abstract
Published
A Short Review on 4D Printing
Khan, F., Celik, H. K., Oral, O. & Rennie, A. E. W., 04/2018, 3rd International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2018. Çetinkaya, K., Özsoy, K., Duman, B. & Kayaalp, K. (eds.). Antalya, Turkey, p. 199-203 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
A numerical modeling approach of composite risers for deep waters
Amaechi, C. V. & Ye, J., 8/09/2017, ICCS20 20th International Conference on Composite Structures. Ferreira, A. J. M., Larbi, W., Deu, J-F., Tornabene, F. & Fantuzzi, N. (eds.). Societa Editrice Esculapio, p. 262-263 2 p. (Structural and Computational Mechanics Book Series).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
Sensing platform based on laser-engineered nanocomposite glass
Zolotovskaya, S. & Abdolvand, A., 5/09/2016, Photon16. IOP Publishing Ltd, p. 79 1 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
Prediction of thermal cracking in concrete structures reinforced with GFRP
EL-Zaroug, O., Forth, J. & Ye, J., 06/2013, FRPRCS-11: 11th International Symposiumn on Fibre Reinforced Polymer for Reinforced Concrete Structures . Barros, J. (ed.). Elsevier
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
The absence of nanometre sized UHMWPE wear particles retrieved from ex-vivo tissue
Green, S., Elfick, A. P. & Unsworth, A., 2001, Trans 4th Combined meeting Orthopaedic Research Societies of the USA, Europe Canada and Japan. Chicago, Ill. : Orthopaedic research society, p. 93 1 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
How size affects the mobility of THR wear debris
Green, S., Elfick, A. P. D. & Liu, C., 2001, European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001.. London: European Society for Biomaterials, p. T41
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
Compression failure mode of two CMW bone cements
Green, S., Liu, C., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 2001, European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001.. London: European Society for Biomaterials, p. P51
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Conference paper
Published
Guidelines on Designing Marine Hoses for Oil/Gas Applications
Amaechi, C. V., 28/10/2022.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Mechanics, hydrodynamics and novel design of composite risers with application on offshore hoses
Amaechi, C. V. & Ye, J., 16/04/2021.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Local and Global Design of Composite Risers on Truss SPAR Platform in Deep waters
Amaechi, C. V., Ye, J., Hou, X., Gillett, N., Odijie, A. C. & Wang, F., 3/07/2019.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Numerical design of Novel Composite risers for deep water applications
Amaechi, C. V. & Ye, J., 5/05/2018.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
A Numerical Modeling Approach of Composite Riser Hoses
Amaechi, C. V. & Ye, J., 19/12/2017.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effects of Lap Thickness and Joint Geometry on Failure of Pultruded Composite Single-Lap Bolted Tension Joints
Turvey, G. J. & Assassa, J., 5/09/2017, p. 23-28. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Comparison of Galvanometer and Polygon Scanning Systems on Component Production Rates in Selective Laser Sintering
King, B., Rennie, A. E. W. & Bennett, G. R., 27/04/2017. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Time-Dependant Human Mastication Simulation of Agricultural Products and Its Rapid Prototyping Aided Evaluation: A Case Study for Pecan Kernel Mastication
Celik, H. K., Rennie, A. E. W., Er, K., Abram, T. N. & Akinci, I., 27/04/2017. 10 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Utilising Multi-Material PolyJet Additive Manufacturing for the Design and Fabrication of Prototype Flood Protection Door Seals
Walsh, S. M. R., Rennie, A. E. W., Abram, T. N., Snape, M. & Roberts, L., 27/04/2017. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Experimental investigation of recycled carpet composites for barrier structures
Sotayo, A., Green, S. M. & Turvey, G. J., 04/2016.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Simulation of flow characteristics for filters designed with a non-stochastic lattice structure fabricated via additive manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015, p. 153-158. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Multi-material additive manufacture of multi-layer ceramic capacitors
King, B. A. T., Rowan, B., Williams, C., Williams, L., Tubby, D., Rennie, A. E. W. & Dennison, K., 12/2015, p. 79-85. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Pressure drop and velocity simulations in non-stochastic lattice structure for filter applications fabricated using additive manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Understanding Fluid-Structure Interaction for high amplitude wave loadings on a deep-draft paired column semi-submersible platform: a finite element approach
Odijie, C. & Ye, J., 9/11/2015.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artefacts
Kaufman, J., Rennie, A. & Clement, M., 03/2015. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Designing advanced filtration media through metal additive manufacturing
Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 02/2015. 9 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Innovations in filtration through additive manufacturing: Paper: EP140165
Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 09/2014. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Improved filtration using additive manufacturing
Burns, N., Geekie, L., Travis, D., Burns, M., Weston, D. P. & Rennie, A., 07/2014.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Single- and double-lap bolted joints in pultruded composite plate
Turvey, G., 2014.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Introducing functionality to filter media
Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 6/11/2013. 10 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Using additive manufacturing to build energy efficient filter supports
Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 10/2013. 9 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Design of a reconfigurable platform for navigation signal simulation
Ming, D., Zhong, X., Ma, X. & Liu, L., 2013.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Functional analysis for the development of bio-medical products
Lupeanu, M., Neagu, C., Opran, C. & Rennie, A., 10/2012, p. 330-336. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
An experimental investigation of the tensile behaviour of single-lap bolted joints in pultruded GFRP plate
Turvey, G. & Gode, J., 13/09/2012. 15 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Optimal sensor selection for wind turbine condition monitoring using multivariate principal component analysis approach
Wang, Y., Ma, X. & Joyce, M., 09/2012. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Generic model of a community-based microgrid integrating wind turbines and photovoltaics
Ma, X., Qin, J. & Wang, Y., 07/2012, p. 3147-3153. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Failure of single-lap single-bolt tension joints in pultruded glass fibre reinforced plate
Turvey, G., 13/06/2012. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

Previous 1 2 3 4 5 6 7 8 ...10 Next

Research

Structures, Materials and Manufacturing

Quick Links

Connect With Us