Home > Research > Publications & Outputs >

« Back

Find by keywords:

301 - 325 out of 704Page size: 25
  1. Published

    Three-Dimensional Discrete Element Modeling of the Damage Behaviour of Cross-Ply Laminate under Low-Velocity Impact

    Yang, D., Tan, Y. Q., Ye, J. & Sheng, Y., 2009, In: Civil-Comp Proceedings. 91, Paper 191.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  2. Published

    Three-dimensional Modeling of Stress Transfer, Stiffness Degradation, failure and Transverse Cracking in Composite Laminates.

    Ye, J., 2009, Advances in Engineering Mechanics. Qin, Q.-H. & Sun, B. (eds.). Nova Science Publishers, Vol. 1. p. 127-165 39 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  3. Published

    Time Domain Analysis of Ultrasonic Wave Propagation Using an Electromagnetic Acoustic Transducer

    Thomas, S., Obayya, S., Pinto, D., Dulay, D., Balachandran, W. & Darwish, M., 2009, In: Sensors and Transducers Journal. 108, 9, p. 102-115 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  4. Published

    Transparent metal oxide thin-film transistors prepared by spray pyrolysis

    Bashir, A., Wöbkenberg, P., Smith, J., Adamopoulos, G., Bradley, D. & Anthopoulos, T., 2009.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  5. Published

    X-band crab cavities for the CLIC beam delivery system

    Burt, G., Ambattu, P., Dexter, A., Abram, T., Dolgashev, V., Tantawi, S. & Jones, R. M., 1/12/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  6. Published

    Efficient multiresolution time-domain analysis of arbitrarily shaped photonic devices

    Letizia, R. & Obayya, S. S. A., 12/2008, In: IET Optoelectronics. 2, 6, p. 241-253 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  7. Published

    Modelling semi-rigid composite joints with precast hollowcore slabs in hogging moment region

    Fu, F., Lam, D. & Ye, J., 12/2008, In: Journal of Constructional Steel Research. 64, 12, p. 1408-1419 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  8. Published

    Multiresolution Time Domain Scheme for Dispersive Second Harmonic Generation Integrated Devices

    Letizia, R. & Obayya, S., 12/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  9. Unpublished

    Rapid Manufacturing Design Tools

    Smith, P. & Rennie, A., 12/2008, (Unpublished). 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  10. Published

    Stress analysis of cross-ply composite laminates with transverse cracks

    Yang, J., Ye, J. & Bao, Y., 12/2008, In: Mechanics of Composite Materials. 44, 6, p. 557-580 24 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  11. Published

    A Comprehensive Business Model for Rapid Manufactured Products

    Hasan, S. & Rennie, A., 10/2008, 19th International Symposium of the Danube-Adria-Association-for-Automation-and-Manufacturing - Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions. Vienna: DAAAM International, p. 591-592 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  12. Unpublished
  13. Published

    On the Analysis and Improvement of Yield for TWT Small-Signal Gain

    Paoloni, C., 10/2008, In: IEEE Transactions on Electron Devices. 55, 10, p. 2774-2778 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  14. Published

    Femtosecond laser micromachining of fibre Bragg gratings for simultaneous measurement of temperature and concentration of liquids

    Alemohammad, H., Toyserkani, E. & Pinkerton, A. J., 21/09/2008, In: Journal of Physics D: Applied Physics. 41, 18, p. - 9 p., 185101.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  15. Published

    Electronic state modification in laser deposited amorphous carbon films by the inclusion of nitrogen

    Miyajima, Y., Adamopoulos, G., Stolojan, V., Garcia-Caurel, E., Drévillon, B., Shannon, J. M. & Silva, S. R. P., 17/09/2008, In: Journal of Applied Physics. 104, 6, 9 p., 063701.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  16. Published

    Application of molecular electronics devices in digital circuit design.

    Lei, C., Pamunuwa, D. B., Bailey, S. & Lambert, C., 09/2008, Nano-Net Third International ICST Conference, NanoNet 2008, Boston, MA, USA, September 14-16, 2008, Revised Selected Papers. Cheng, M. (ed.). Berlin: Springer, p. 61-65 5 p. (Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  17. Published

    Pitch plane analysis of a twin-gas-chamber strut suspension

    Cao, D., Rakheja, S. & Su, C.-Y., 08/2008, In: Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 222, 8, p. 1313-1335 23 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  18. Published

    Component repair using laser direct metal deposition

    Pinkerton, A. J., Wang, W. & Li, L., 07/2008, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 222, 7, p. 827-836 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  19. Published

    High efficiency multiple beam klystron (MBK) cavity properties

    Lingwood, C., Carter, R. & Marchesin, R., 07/2008, Vacuum Electronics Conference, 2008. IVEC 2008. IEEE International. IEEE, p. 427-428 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  20. Published

    Simulations of field emission behaviour in carbon nanotubes based vacuum triode

    Paoloni, C., Brunetti, F., Riccitelli, R., Ulisse, G. & Di Carlo, A., 07/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  21. Published

    Design templates for consumer use in customising additive layer manufactured products

    Ariadi, Y. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 137-144 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  22. Published

    Development of an Additive Layer Manufacturing business model: creating an environment to support designers from concept to distribution

    Ariadi, Y., Hasan, S., Smith, P. & Rennie, A., 06/2008, Proceedings of 32nd Japan Rapid Prototyping Symposium. p. 79-84 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  23. Published

    Development of an Additive Layer Manufacturing Selection Tool for Rapid Manufacturing Applications

    Smith, P. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 69-79 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  24. Published

    Efficient Multiresolution Time Domain Analysis for Second Harmonic Generation Integrated Devices

    Letizia, R. & Obayya, S., 06/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  25. Published

    Encouraging Environmental Responsibility in Small Businesses

    Moss, J., Lambert, C. & Rennie, A., 06/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

Previous 1...9 10 11 12 13 14 15 16 ...29 Next

Back to top