Home > Research > Manufacturing > Publications & Outputs

Research

View graph of relations

Manufacturing

201 - 300 out of 1,000Page size: 100
RSS feed of this list
  1. 2018
  2. Published

    Pressure-assisted infiltration of molten metals into non-rigid, porous carbon fibre structures

    Constantin, H., Harper, L. & Kennedy, A. R., 1/05/2018, In: Journal of Materials Processing Technology. 255, p. 66-75 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  3. Published

    Porous calcium phosphate glass microspheres for orthobiologic applications

    Hossain, K. M. Z., Patel, U., Kennedy, A., Macri-Pellizzeri, L., Sottile, V., Grant, D. M., Scammell, B. E. & Ahmed, I., 05/2018, In: Acta Biomaterialia. 72, p. 396-406 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    A Short Review on 4D Printing

    Khan, F., Celik, H. K., Oral, O. & Rennie, A. E. W., 04/2018, 3rd International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2018. Çetinkaya, K., Özsoy, K., Duman, B. & Kayaalp, K. (eds.). Antalya, Turkey, p. 199-203 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  5. Published

    New Methodology for Optimal Placement of Piezoelectric Sensor/Actuator Pairs for Active Vibration Control of Flexible Structures

    Daraji, A. H., Hale, J. M. & Ye, J., 2018, In: Journal of Vibration and Acoustics. 140, 1, 13 p., 011015.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    Replication and fabrication of crafted and natural artifacts by reverse engineering using single camera photogrammetry

    Kaufman, J., 2018, Lancaster University. 486 p.

    Research output: Thesis › Doctoral Thesis

  7. 2017
  8. Published

    A Numerical Modeling Approach of Composite Riser Hoses

    Amaechi, C. V. & Ye, J., 19/12/2017.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  9. Published

    A water-soluble core material for manufacturing hollow composite sections

    Xiao, Z., Harper, L. T., Kennedy, A. R. & Warrior, N. A., 15/12/2017, In: Composite Structures. 182, p. 380-390 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  10. Published

    First accelerator test of vacuum components with laser-engineered surfaces for electron-cloud mitigation

    Calatroni, S., Valdivieso, E. G.-T., Neupert, H., Nistor, V., Fontenla, A. T. P., Taborelli, M., Chiggiato, P., Malyshev, O., Valizadeh, R., Wackerow, S., Zolotovskaya, S., Gillespie, W. A. & Abdolvand, A., 20/11/2017, In: Physical Review Accelerators and Beams. 20, 11, 12 p., 113201.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. Published

    Spatially Resolved Operando Measurements in Heterogeneous Catalytic Reactors, Volume 50: Imaging Gas Flow in Gas–Solid Catalytic Systems by Near-Infrared Tomography

    Aiouache, F., 17/11/2017, Spatially Resolved Operando Measurements in Heterogeneous Catalytic Reactors. Dixon, A. & Deutschmann, O. (eds.). Academic Press, p. 203-280 78 p. (Advances in Chemical Engineering; vol. 50).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  12. Published

    Experimental research on influence of multi-level loading on axial compression behavior of concrete-filled circular steel tubular short columns

    Tong, D., Yu, M., Bao, H. & Ye, J., 1/11/2017, In: Jianzhu Jiegou Xuebao/Journal of Building Structures. 38, p. 241-248 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  13. Published

    Metamodel-assisted design optimization of piezoelectric flex transducer for maximal bio-kinetic energy conversion

    Luo, L., Liu, D., Zhu, M. & Ye, J., 1/11/2017, In: Journal of Intelligent Material Systems and Structures. 28, 18, p. 2528-2538 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    New Tracheostomy Device Concept: An Additive Manufacturing Challenge in Reducing Late Clinical Complications

    Ulmeanu, M.-E., Ulmeanu, L., Doicin, C.-V., Rennie, A. E. W. & Lupeanu, E., 11/2017, Proceedings of the 30th International Business Information Management Association Conference: Vision 2020: Sustainable Economic development, Innovation Management, and Global Growth. Soliman, K. S. (ed.). Madrid, Spain: International Business Information Management Association (IBIMA), p. 2611-2622 12 p. #538

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  15. Published

    The processing and properties of syntactic Al foams containing low cost expanded glass particles

    Wright, A. & Kennedy, A. R., 11/2017, In: Advanced Engineering Materials. 19, 11, 6 p., 1600467.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    Nonlinear FEM based high-speed shell shattering simulation for shelled edible agricultural products: Pecan fruit shattering

    Celik, H. K., Caglayan, N. & Rennie, A. E. W., 10/2017, In: Journal of Food Process Engineering. 40, 5, 8 p., e12520.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. Published

    A numerical modeling approach of composite risers for deep waters

    Amaechi, C. V. & Ye, J., 8/09/2017, ICCS20 20th International Conference on Composite Structures. Ferreira, A. J. M., Larbi, W., Deu, J.-F., Tornabene, F. & Fantuzzi, N. (eds.). Societa Editrice Esculapio, p. 262-263 2 p. (Structural and Computational Mechanics Book Series).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  18. Published

    Effects of Lap Thickness and Joint Geometry on Failure of Pultruded Composite Single-Lap Bolted Tension Joints

    Turvey, G. J. & Assassa, J., 5/09/2017, p. 23-28. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  19. Published

    Engineering FEA Sintering Model Development for Metal Supported SOFC

    Chatzimichail, R., Dawson, R. J., Green, S. M., Sullivan, D., Mukerjee, S. & Selby, M., 23/07/2017, In: ECS Transactions. 78, 1, p. 2773-2783 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    Wave induced stress profile on a paired column semisubmersible hull formation for column reinforcement

    Odijie, C., Quayle, S. D. & Ye, J., 15/07/2017, In: Engineering Structures. 143, p. 77-90 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  21. Published

    Cold sprayed metal-ceramic coatings using satellited powders

    Al-Hamdani, K. S., Murray, J. W., Hussain, T., Kennedy, A. & Clare, A. T., 1/07/2017, In: Materials Letters. 198, p. 184-187 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    A novel method for the manufacture of porous structures with multi-component, coated pores

    Siddiq, A. R. & Kennedy, A. R., 1/06/2017, In: Materials Letters. 196, p. 324-327 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  23. Published

    Electro-mechanical dynamics of spiral waves in a discrete 2D model of human atrial tissue

    Brocklehurst, P., Ni, H., Zhang, H. & Ye, J., 16/05/2017, In: PLoS ONE. 12, 5, 21 p., e0176607.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    Modeling and Characterization of Novel Deepwater Marine Risers

    Amaechi, C. V. & Ye, J., 6/05/2017.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  25. Published

    Comparison of Galvanometer and Polygon Scanning Systems on Component Production Rates in Selective Laser Sintering

    King, B., Rennie, A. E. W. & Bennett, G. R., 27/04/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  26. Published

    Time-Dependant Human Mastication Simulation of Agricultural Products and Its Rapid Prototyping Aided Evaluation: A Case Study for Pecan Kernel Mastication

    Celik, H. K., Rennie, A. E. W., Er, K., Abram, T. N. & Akinci, I., 27/04/2017. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  27. Published

    Utilising Multi-Material PolyJet Additive Manufacturing for the Design and Fabrication of Prototype Flood Protection Door Seals

    Walsh, S. M. R., Rennie, A. E. W., Abram, T. N., Snape, M. & Roberts, L., 27/04/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  28. Published

    Design and structural optimisation of a tractor mounted telescopic boom crane

    Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 39, 3, p. 909-924

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Pore-scale numerical investigation of pressure drop behaviour across open-cell metal foams

    Carvalho, T. P. D., Morvan, H., Hargreaves, D., Oun, H. & Kennedy, A., 03/2017, In: Transport in Porous Media. 117, 2, p. 311-336 26 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  30. Published

    Reverse engineering approach for precise measurement of the physical attributes related to the geometric features of agricultural products

    Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of Food Measurement and Characterization. 11, 1, p. 75-84 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    Editorial: Rapid Design, Prototyping and Manufacturing

    Bibb, R. (Guest editor) & Rennie, A. E. W. (Guest editor), 01/2017, In: International Journal of Rapid Manufacturing. 6, 2-3, p. 95-96 2 p.

    Research output: Contribution to Journal/Magazine › Editorial › peer-review

  32. Unpublished

    A DEM for visualising damage evolution and predicting failure of composite lamina under uniaxial and biaxial loads

    Ismail, Y., 2017, (Unpublished) Lancaster University. 177 p.

    Research output: Thesis › Doctoral Thesis

  33. 2016
  34. Published

    Characterization Behaviour of Novel Composite Deepwater Risers

    Amaechi, C. V. & Ye, J., 20/12/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  35. Published

    Experimental and Finite Element (FE) modelling of timber fencing for benchmarking novel composite fencing

    Sotayo, A., Green, S. M. & Turvey, G. J., 15/12/2016, In: Composite Structures. 158, p. 44-55 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    Health, safety and biohazards in construction: How safe is the work place? Risks and Hazards in our environment

    Amaechi, C. V., 20/11/2016, 1 ed. Germany: LAP LAMBERT Academic Publishing . 141 p.

    Research output: Book/Report/Proceedings › Book

  37. Published

    A DEM model for visualising damage evolution and predicting failure envelope of composite laminae under biaxial loads

    Ismail, Y., Yang, D. & Ye, J., 1/10/2016, In: Composites Part B: Engineering. 102, p. 9-28 20 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Published

    3D printed facial laser scans for the production of localised radiotherapy treatment masks

    Briggs, M., Clements, H., Wynne, N., Rennie, A. E. W. & Kellett, D., 10/2016, In: Journal of Visual Communication in Medicine. 39, 3-4, p. 99-104 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  39. Published

    Kinetics and reactive stripping modelling of hydrogen isotopic exchange of deuterated waters

    Aldehani, M., Alzahrani, F., tSaoir, M. N. A., Abreu Fernandes, D. L., Assabumrungrat, S. & Aiouache, F., 10/2016, In: Chemical Engineering and Processing: Process Intensification. 108, p. 58-73 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    On second harmonic generation and multiphoton-absorption induced luminescence from laser-reshaped silver nanoparticles embedded in glass

    Zolotovskaya, S., Tyrk, M. A., Stalmashonak, A., Gillespie, W. A. & Abdolvand, A., 23/09/2016, In: Nanotechnology. 27, 43, 8 p., 435703.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  41. Published

    Hybrid graphene/geopolymeric cement as a superionic conductor for structural health monitoring applications

    Saafi, M. B. S., Piukovics, G. & Ye, J., 20/09/2016, In: Smart Materials and Structures. 25, 10, 11 p., 105018.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  42. Published

    Sensing platform based on laser-engineered nanocomposite glass

    Zolotovskaya, S. & Abdolvand, A., 5/09/2016, Photon16. IOP Publishing Ltd, p. 79 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  43. Published

    First-time demonstration of measuring concrete prestress levels with metal packaged bre optic sensors

    McKeeman, I., Fusiek, G., Johnston, M., Saafi, M. B. S., Niewczas, P., Walsh, M. & Khan, S., 24/08/2016, In: Smart Materials and Structures. 25, 9, 10 p., 095051.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  44. Published

    Benchmark testing and Finite Element (FE) analysis of timber fencing for replacement by novel composite materials

    Sotayo, A., Green, S. M. & Turvey, G. J., 11/07/2016, Mechcomp2 2nd International Conference on Mechanics of Composites . Ferreira, A., Neves, A., Viola, E., Tornabene, F. & Fantuzzi, N. (eds.). Bologna: Editrice Esculapio

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  45. Published

    Modelling and Characterization of Novel Deepwater Composite Risers

    Amaechi, C. V. & Ye, J., 28/06/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  46. Published

    Fault diagnosis in multi-machine power systems using the Derivative-free nonlinear Kalman Filter

    Rigatos, G., Siano, P., Wira, P. & Ma, X., 13/06/2016, Environmental, Energy, and Structural Monitoring Systems (EESMS), 2016 IEEE Workshop on. IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  47. Published

    Composite Risers – an offshore deepwater solution

    Amaechi, C. V. & Ye, J., 7/05/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  48. Published

    Testing and analysis of pultruded GFRP continuous beams for the deflection serviceability limit state

    Turvey, G. J., 1/05/2016, In: Composite Structures. 141, p. 213-220 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  49. Published

    Discrete element method for generating random fibre distributions in micromechanical models of fibre reinforced composite laminates

    Ismail, Y., Yang, D. & Ye, J., 1/04/2016, In: Composites Part B: Engineering. 90, p. 485-492 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  50. Published

    Experimental investigation of recycled carpet composites for barrier structures

    Sotayo, A., Green, S. M. & Turvey, G. J., 04/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  51. Published

    Lasers in additive manufacturing

    Pinkerton, A. J., 04/2016, In: Optics and Laser Technology. 78, Part A, p. 25-32 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  52. Published

    Pressure determination approach in specific pressure region and FEM based stress analysis of the housing of an external gear pump

    Cinar, R., Ucar, M., Celik, K., Firat, M. Z. & Rennie, A., 04/2016, In: Experimental Techniques. 40, 2, p. 489-499 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  53. Published

    Pressure Drop and Velocity Simulations in Non-Stochastic Structures - Filters Fabricated by Additive Manufacturing

    Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 04/2016, In: Filtration. 16, 2, p. 97-102 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  54. Published

    Designing advanced filtration media through metal additive manufacturing

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A. E. W., 03/2016, In: Chemical Engineering and Technology. 39, 3, p. 535-542 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  55. Published

    Wireless surface acoustic wave sensors for displacement and crack monitoring in concrete structures

    Perry, M., McKeeman, I., Saafi, M. B. S. & Niewczas, P., 22/02/2016, In: Smart Materials and Structures. 25, 3, 9 p., 035035.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  56. Published

    Design of paired column semisubmersible hull

    Odijie, C., 2016, Lancaster University. 205 p.

    Research output: Thesis › Doctoral Thesis

  57. Unpublished

    Development and characterisation of novel structural composites from recycled materials

    Sotayo, A., 2016, (Unpublished) Lancaster University. 263 p.

    Research output: Thesis › Doctoral Thesis

  58. Published

    Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference

    Rennie, A. E. W. (Editor) & Bibb, R. (Editor), 2016, Lancaster: Lancaster University. 165 p.

    Research output: Book/Report/Proceedings › Proceedings

  59. 2015
  60. Published

    Effects of lactic and citric acid on early-age engineering properties of Portland/calcium aluminate blended cements

    Kastiukas, G., Zhou, X., Castro-Gomes, J., Huang, S. & Saafi, M. B. S., 30/12/2015, In: Construction and Building Materials. 101, 1, p. 389-395 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  61. Published

    Gas flow visualisation in low aspect ratio packed beds by three-dimensional modelling and near-infrared tomography

    Alzahrani, F., Aldehani, M., Rusi, H., McMaster, M., Abreu Fernandes, D. L., Assabumrungrat, S., t Saoir, M. N. A. & Aiouache, F., 30/12/2015, In: Industrial and Engineering Chemistry Research. 54, 51, p. 12714-12729 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  62. Published

    Numerical Modeling of Oil/Gas Flow in Pipes in Deep Sea

    Amaechi, C. V. & Ye, J., 15/12/2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  63. Published

    Experimental investigation of the load–deformation behaviour of pultruded GFRP modular and custom safety barriers

    Turvey, G. J., 1/12/2015, In: Composite Structures. 133, p. 659-669 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  64. Published

    Adaptive materials: utilising additive manufactured scaffolds to control self-organising material aggregation

    Blaney, A., Alexander, J. M., Dunn, N. S., Richards, D. C., Rennie, A. E. W. & Anwar, J., 12/2015, Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference. Rennie, A. & Bibb, R. (eds.). Loughborough: Lancaster University, p. 49-57 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  65. Published

    Effect of vortex induced vibration on a paired-column semisubmersible platform

    Odijie, C. & Ye, J., 12/2015, In: International Journal of Structural Stability and Dynamics. 15, 8, 22 p., 1540019.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  66. Published

    Multi-material additive manufacture of multi-layer ceramic capacitors

    King, B. A. T., Rowan, B., Williams, C., Williams, L., Tubby, D., Rennie, A. E. W. & Dennison, K., 12/2015, p. 79-85. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  67. Published

    Pressure drop and velocity simulations in non-stochastic lattice structure for filter applications fabricated using additive manufacturing

    Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  68. Published

    Simulation of flow characteristics for filters designed with a non-stochastic lattice structure fabricated via additive manufacturing

    Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015, p. 153-158. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  69. Published

    Effects of persistent atrial fibrillation-induced electrical remodeling on atrial electro-mechanics – insights from a 3D model of the human atria

    Adeniran, I., Maclver, D. H., Garratt, C. J., Ye, J., Hancox, J. C. & Zhang, H., 25/11/2015, In: PLoS ONE. 10, 11, 24 p., e0142397.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  70. Published

    Understanding Fluid-Structure Interaction for high amplitude wave loadings on a deep-draft paired column semi-submersible platform: a finite element approach

    Odijie, C. & Ye, J., 9/11/2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  71. Published

    Effects of splice joint geometry and bolt torque of the serviceability response of pultruded glass fibre reinforced polymer composite beams

    Turvey, G. & Cerutti, X., 1/11/2015, In: Composite Structures. 131, p. 490-500 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  72. Published

    Structural integrity monitoring of onshore wind turbine concrete foundations

    Currie, M., Saafi, M., Tachtatzis, C. & Quail, F., 11/2015, In: Renewable Energy. 83, p. 1131-1138 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  73. Published

    A 2D Electromechanical Model of Human Atrial Tissue Using the Discrete Element Method

    Brocklehurst, P., Adeniran, I., Yang, D., Sheng, Y., Zhang, H. & Ye, J., 25/10/2015, In: Biomed Research International. 2015, 13 p., 854953.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  74. Published

    University collaboration improves Mimic condition monitoring

    Ma, X. & Briddon, M., 23/09/2015, The Motorship Magazine - insight for marine technology professionals.

    Research output: Contribution to specialist publication › Featured article

  75. Published

    Condition monitoring of wind turbines based on extreme learning machine

    Qian, P., Ma, X. & Wang, Y., 12/09/2015, ICAC2015: Proceedings of the 21st International Conference on Automation and Computing. IEEE, p. 37-42 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  76. Published

    Fault ride-through analysis and protection of a 2-MW DFIG tidal current turbine

    Zhang, D., Chen, Y., Yang, J., Tan, M., Ma, X. & Li, W., 1/09/2015, In: Marine Technology Society Journal . 49, 5, p. 49-57 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  77. Published

    Radially and azimuthally polarized laser induced shape transformation of embedded metallic nanoparticles in glass

    Tyrk, M. A., Zolotovskaya, S. A., Gillespie, W. A. & Abdolvand, A., 27/08/2015, In: Optics Express. 23, 18, p. 23394-23400 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  78. Published

    Older people and oral health: setting a patient-centred research agenda

    Brocklehurst, P. R., Mackay, L., Goldthorpe, J. & Pretty, I., 18/08/2015, In: Gerodontology. 32, 3, p. 222-228 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  79. Published

    A novel 3D composite structure with tunable Poisson's ratio and stiffness

    Hou, X. & Hu, H., 07/2015, In: physica status solidi (b). 252, 7, p. 1565–1574 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  80. Published

    An investigation into the use of additive manufacture for the production of metallic bipolar plates for polymer electrolyte fuel cell stacks

    Dawson, R., Patel, A., Rennie, A. & White, S., 07/2015, In: Journal of Applied Electrochemistry. 45, 7, p. 637-645 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  81. Published

    Effect of process conditions on temperature distribution in the powder bed during laser sintering of polyamide-12

    Nelson, J. A., Rennie, A., Abram, T., Bennett, G. R., Adiele, A., Tripp, M., Wood, M. & Galloway, G., 07/2015, In: Journal of Thermal Engineering. 1, 3, p. 159-165 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  82. Published

    Numerical modeling of supercritical carbonation process in cement-based materials

    Zha, X., Yu, M., Ye, J. & Feng, G., 06/2015, In: Cement and Concrete Research. 72, p. 10-20 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  83. Published

    Process design of continuous biodiesel production by reactive distillation: comparison between homogeneous and heterogeneous catalysts

    Boon-anuwat, N.-N., Kiatkittipong , W., Aiouache, F. & Assabumrungrat, S., 06/2015, In: Chemical Engineering and Processing: Process Intensification. 92 , p. 33-44 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  84. Published

    Toughening mechanisms in composite materials

    Qin, Q. (Editor) & Ye, J. (Editor), 06/2015, Elsevier. 416 p. (Woodhead Publishing Series in Composites Science and Engineering)

    Research output: Book/Report/Proceedings › Book

  85. Published

    Deformation simulation of a tyre safety cage in testing of agricultural vehicle tyres

    Celik, H. K., Rennie, A. E. W., Dawson, D., Eatough, A., Eatough, J. & Akinci, I., 05/2015, Environmentally Friendly Agriculture and Forestry for Future Generations: International Scientific XXXVI CIOSTA & CIGR Section V Conference 2015. Popov, V. D., Belyakov, V. V., Efimov, V. A., Selikhovkin, A. V., Shirokov, S. N., Ovchinnikova, E. I., Maksimov, D. A., Levchenko, L. V., Smelik, V. A., Ruzhev, V. A., Korostelev, A. A., Lepp, N. V., Shaytarova, O. E. & Belinskaya, I. V. (eds.). St Petersburg, Russian Federation: Saint Petersburg State Agrarian University, p. 172-183 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  86. Published

    Discrete element modelling of unidirectional fibre-reinforced polymers under transverse tension

    Ismail, Y., Sheng, Y., Yang, D. & Ye, J., 05/2015, In: Composites Part B: Engineering. 73, p. 118-125 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  87. Published

    Metamaterials with negative Poisson’s ratio: a review of mechanical propterties and deformation mechanisms

    Hou, X. & Silberschmidt, V., 10/04/2015, Mechanics of Advanced Materials: Analysis of Properties and Performance. Silberschmidt, V. V. & Matveenko, V. P. (eds.). Springer International Publishing, p. 155-179 25 p. (Engineering Materials).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  88. Published

    Carpet recycling: a review of recycled carpets for structural composites

    Sotayo, A., Green, S. & Turvey, G., 04/2015, In: Environmental Technology and Innovation. 3, p. 97-107 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  89. Published

    Enhancing the load capacity of pultruded GFRP beams via discrete load redistribution

    Turvey, G., 04/2015, In: Composite Structures. 122, p. 352-360 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  90. Published

    The lost crown of Horus

    Kaufman, J. & Rennie, A. E. W., 04/2015, Ancient Egypt, 15, 5, p. 22-23 2 p.

    Research output: Contribution to specialist publication › Article

  91. Published

    Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art

    Kaufman, J., Rennie, A. & Clement, M., 1/03/2015, In: Journal of Computing and Information Science in Engineering. 15, 1, 7 p., 011006.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  92. Published

    Comparative evaluation of optimum additive manufacturing technology to fabricate medical bespoke prototypes obtained with composite materials

    Ulmeanu, M., Doicin, C., Baila, D., Rennie, A. E. W., Neagu, C. & Laha, S., 03/2015, In: Revista de Materiale Plastice. 52, 3, p. 416-422 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  93. Published

    Powder removal from Ti-6Al-4V cellular structures fabricated via electron beam melting

    Hasib, H., Harrysson, O. L. A. & West, H. A., 03/2015, In: JOM Journal of the Minerals, Metals and Materials Society. 67, 3, p. 639-646 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  94. Published

    Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artefacts

    Kaufman, J., Rennie, A. & Clement, M., 03/2015. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  95. Published

    Hybrid optical-fibre/geopolymer sensors for structural health monitoring of concrete structures

    Perry, M., Saafi, M., Fusiek, G. & Niewczas, P., 24/02/2015, In: Smart Materials and Structures. 24, 4, 8 p., 045011.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  96. Published

    Determination of head losses in drip irrigation laterals with cylindrical in-line type emitters through CFD analysis

    Celik, K., Karayel, D., Lupeanu, M., Rennie, A. E. W. & Akinci, I., 20/02/2015, In: Bulgarian Journal of Agricultural Science. 21, 3, p. 703-710 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  97. Published

    Advances in the modelling of laser direct metal deposition (invited)

    Pinkerton, A., 02/2015, In: Journal of Laser Applications. 27, S1, 7 p., S15001.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  98. Published

    Designing advanced filtration media through metal additive manufacturing

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 02/2015. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  99. Published

    Experimental investigation of the mechanical properties of neoprene coated nylon woven reinforced composites

    Aboshio, A., Green, S. & Ye, J., 02/2015, In: Composite Structures. 120, p. 386-393 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  100. Published

    Model-based and fuzzy logic approaches to condition monitoring of operational wind turbines

    Cross, P. & Ma, X., 02/2015, In: International Journal of Automation and Computing. 12, 1, p. 25-34 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  101. Published

    Performance of an improved combination unit of Pd-membrane methane steam reformer and intermediate temperature solid oxide fuel cell (C-Pd-ITSOFC)

    Vivanpatarakij, S., Aiouache, F. & Assabumrungrat, S., 30/01/2015, In: International Journal of Hydrogen Energy. 40, 4, p. 1894-1901 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  102. Published

    Enhanced properties of graphene/fly ash geopolymeric composite cement

    Saafi, M., Tang, L., Fung, J., Rahman, M. & Liggat, J., 01/2015, In: Cement and Concrete Research. 67, p. 292-299 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  103. Published

    Flexural behavior of pultruded glass fibre reinforced polymer composite beams with bolted splice joints

    Turvey, G. & Cerutti, X., 01/2015, In: Composite Structures. 119, 1, p. 543-550 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  104. Published

    A 2D electro-mechanical model of human atrial tissue using the discrete element method

    Brocklehurst, P., Adeniran, I., Yang, D., Sheng, Y., Zhang, H. & Ye, J., 2015, In: Biomed Research International. 2015, 12 p., 854953.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 3 4 5 6 7 8 ...10 Next

Back to top