Home > Research > Energy > Publications & Outputs
View graph of relations
  1. Published

    Compressible Navier-Stokes analysis of an oscillating wing in a power-extraction regime using efficient low-speed preconditioning

    Campobasso, S. & Drofelnik, J., 30/08/2012, In: Computers and Fluids. 67, p. 26-40 15 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  2. Published

    Ad-hoc Boundary Conditions for CFD Analyses of Turbomachinery Problems with Strong Flow Gradients at Farfield Boundaries

    Campobasso, S. & Baba-Ahmadi, M., 20/04/2011, In: Journal of Turbomachinery. 133, 4, 9 p., 041010 .

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  3. Published

    Wake-Tracking and Turbulence Modelling in Computational Aerodynamics of Wind Turbine Airfoils

    Campobasso, S., Zanon, A., Minisci, E. & Bonfiglioli, A., 12/2009, In: Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. 223, 8, p. 939-951 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  4. Published

    Turbulent unsteady flow analysis of horizontal axis wind turbine airfoil aerodynamics based on the harmonic balance Reynolds-Averaged Navier-Stokes equations

    Campobasso, S., Gigante, F. & Drofelnik, J., 2014, ASME Turbo Expo 2014: turbine technical conference and exposition: oil and gas applications; organic rankine cycle power systems; supercritical CO2 power cycles; wind energy. The American Society of Mechanical Engineers, Vol. 3B. 14 p. GT2014-25559

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  5. Published

    Compressible Reynolds-Averaged Navier-Stokes analysis of wind turbine turbulent flows using a Fully-Coupled Low-Speed preconditioned multigrid solver

    Campobasso, S., Yan, M., Drofelnik, J., Piskopakis, A. & Caboni, M., 2014, ASME Turbo Expo 2014: turbine technical conference and exposition: oil and gas applications; organic rankine cycle power systems; supercritical CO2 power cycles; wind energy. The American Society of Mechanical Engineers, Vol. 3B. 15 p. GT2014-25562

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  6. Published

    Analysis of an oscillating wing in a power-extraction regime based on the compressible Reynolds-averaged Navier-Stokes equations and the K–ω SST turbulence model

    Campobasso, S., Piskopakis, A. & Yan, M., 2013, ASME Turbo Expo 2013: Turbine Technical Conference and Exposition: Supercritical CO2 Power Cycles; Wind Energy;. The American Society of Mechanical Engineers, Vol. 8. p. V008T44A013 15 p. GT2013-94531

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  7. Published

    Robust design optimization of wind turbine rotors: invited paper

    Campobasso, S., 09/2015, The 16th International Conference on Fluid Flow Technologies (CMFF’15). 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  8. Published

    Comparative assessment of the harmonic balance Navier Stokes technology for horizontal and vertical axis wind turbine aerodynamics

    Campobasso, M. S., Drofelnik, J. & Gigante, F., 10/09/2016, In: Computers and Fluids. 136, p. 354-370 17 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  9. Published

    Low-speed preconditioning for strongly coupled integration of Reynolds-averaged Navier–Stokes equations and two-equation turbulence models

    Campobasso, M. S., Yan, M., Bonfiglioli, A., Gigante, F. A., Ferrari, L., Balduzzi, F. & Bianchini, A., 06/2018, In: Aerospace Science and Technology. 77, p. 286-298 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  10. Published

    Compressible Navier-Stokes Analysis of Floating Wind Turbine Rotor Aerodynamics

    Campobasso, M. S., Sanvito, A. G., Drofelnik, J., Jackson, A., Zhou, Y., Xiao, Q. & Croce, A., 4/11/2018, ASME 2018 1st International Offshore Wind Technical Conference: 4-7 November 2018, San Francisco, California, USA. The American Society of Mechanical Engineers, 12 p. IOWTC2018-1059

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  11. Published

    Rapid Estimate of Wind Turbine Energy Loss due to Blade Leading Edge Delamination Using Artificial Neural Networks

    Campobasso, S., Cavazzini, A. & Minisci, E., 26/06/2020, In: Journal of Turbomachinery. 142, 7, 11 p., 071002.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  12. Published

    Experimentally validated three-dimensional computational aerodynamics of wind turbine blade sections featuring leading edge erosion cavities

    Campobasso, S., Castorrini, A., Cappugi, L. & Bonfiglioli, A., 31/01/2022, In: Wind Energy. 25, 1, p. 168-189 22 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  13. Published

    A stochastic approach to cable dynamics with moving rivulets

    Cao, D. Q., Tucker, R. W. & Wang, C., 20/11/2003, In: Journal of Sound and Vibration. 268, 2, p. 291-304 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  14. Published

    Dynamic analyses of heavy vehicle with pitch-interconnected suspensions

    Cao, D., Rakheja, S. & Su, C-Y., 2008, In: International Journal of Heavy Vehicle Systems. 15, 2-4, p. 272-308 37 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  15. Published

    Editors' perspectives: road vehicle suspension design, dynamics, and control

    Cao, D., Song, X. & Ahmadian, M., 2011, In: Vehicle System Dynamics. 49, 1-2, p. 3-28 26 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  16. Published

    Heavy vehicle pitch dynamics and suspension tuning

    Cao, D., Rakheja, S. & Su, C-Y., 2008, In: Vehicle System Dynamics. 46, 10, p. 931-953 23 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  17. Published

    Roll- and pitch-plane coupled hydro-pneumatic suspension. Part I Feasibility analysis and suspension properties

    Cao, D., Rakheja, S. & Su, C-Y., 2010, In: Vehicle System Dynamics. 48, 3, p. 361-386 26 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  18. Published

    Roll- and pitch-plane-coupled hydro-pneumatic suspension. Part 2 dynamic response analyses

    Cao, D., Rakheja, S. & Su, C-Y., 2010, In: Vehicle System Dynamics. 48, 4, p. 507-528 22 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  19. Published

    Dynamic analyses of roll plane interconnected hydro-pneumatic suspension systems

    Cao, D., Rakheja, S. & Su, C-Y., 2008, In: International Journal of Vehicle Design. 47, 1-4, p. 51-80 30 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  20. Published

    Pitch plane analysis of a twin-gas-chamber strut suspension

    Cao, D., Rakheja, S. & Su, C-Y., 08/2008, In: Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 222, 8, p. 1313-1335 23 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  21. Published

    Modelling generalisation and power dissipation of flexible-wheel suspension concept for planetary surface vehicles

    Cao, D., Khajepour, A. & Song, X., 2011, In: Vehicle System Dynamics. 49, 8, p. 1299-1320 22 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  22. Published

    Special issue on interdisciplinary aspects of vehicle system dynamics integration

    Cao, D., Rakheja, S. & Sandu, C., 11/2011, In: Mechanical Systems and Signal Processing. 25, 8, p. 3213-3215 3 p.

    Research output: Contribution to Journal/MagazineEditorial

  23. Published

    Urban bus driver ride and road-friendliness. Part II: subjective suspension damping tuning and objective optimization

    Cao, D., Rakheja, S. & Wang, Z., 2011, In: International Journal of Vehicle Design. 57, 4, p. 333-358 26 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  24. Published

    Handling and braking analyses of a heavy vehicle with cross-axle fluidically-coupled suspension

    Cao, D., Rakheja, S. & Su, C-Y., 2009, In: SAE International Journal of Commercial Vehicles. 1, 1, p. 405-416 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  25. Published

    Property Analysis of an X-coupled suspension for sport utility vehicles

    Cao, D., Rakheja, S. & Su, C-Y., 2009, In: SAE International Journal of Passenger Cars- Mechanical Systems. 1, 1, p. 853-862 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  26. Published

    Pitch attitude control and braking performance analysis of heavy vehicles with interconnected suspensions

    Cao, D., Rakheja, S. & Su, C-Y., 2008, In: SAE Journal of Passenger Cars – Electronic and Electrical Systems. 116, p. 119-127 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  27. Published

    Advanced Suspension Systems and Dynamics for Future Road Vehicles

    Cao, D. (ed.) & Song, X. (ed.), 2011, In: Vehicle System Dynamics. 49, 1-2, p. 1-418 418 p.

    Research output: Contribution to Journal/MagazineSpecial issuepeer-review

  28. Published

    Interdisciplinary aspects of vehicle system dynamics integration

    Cao, D., Rakheja, S. & Sandu, C., 08/2011, In: Mechanical Systems and Signal Processing. 25, 6, p. 1877-2038 162 p.

    Research output: Contribution to Journal/MagazineSpecial issuepeer-review

  29. Published

    Advanced vehicle handling dynamics and control

    Cao, D. (ed.), Rakheja, S. (ed.) & Yang, X. (ed.), 2011, In: International Journal of Vehicle Design. 56, 1-4, p. 1-366 366 p.

    Research output: Contribution to Journal/MagazineSpecial issuepeer-review

  30. Published

    Semi-Active Suspension Design for Enhancing Vehicle Ride, Road-Friendliness and Braking Performance

    Cao, D. & Khajepour, A., 2011. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  31. Published

    Wheelbase filtering and characterization of road profiles for vehicle dynamics

    Cao, D., Khajepour, A. & Song, X., 2010. 11 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  32. Published

    Influence of oil compressibility of fluidic suspensions on vehicle roll stability and ride dynamics

    Cao, D. & Khajepour, A., 2010, p. SAE 2010-01-1893.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  33. Published

    Modeling and feasibility analysis of flexible-wheel suspension concept for ground vehicles

    Cao, D., Khajepour, A. & Song, X., 2009. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  34. Published

    Ride dynamic analyses of different concept car suspension system layouts

    Cao, D., Khajepour, A., Zhu, J. & Yin, Z., 2009, p. SAE 2009-01-0360.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  35. Published

    Special issue on advanced vehicle handling dynamics and control

    Cao, D., Rakheja, S. & Yang, X., 2011, In: International Journal of Vehicle Design. 56, 1-4, p. 1-3 3 p.

    Research output: Contribution to Journal/MagazineEditorial

  36. Published

    Analysis of controlled auto-ignition/HCCI combustion in a direct injection gasoline engine with single and split fuel injections

    Cao, L., Zhao, H. & Jiang, X., 2008, In: Combustion Science and Technology. 180, 1, p. 176-205 30 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  37. Published

    Understanding the influence of valve timings on controlled autoignition combustion in a four-stroke port fuel injection engine

    Cao, L., Zhao, H., Jiang, X. & Kalian, N., 06/2005, In: Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 219, D6, p. 807-823 17 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  38. Published

    Numerical investigation into effect of fuel injection timing on CAI/HCCI combustion in a four-stroke GDI engine

    Cao, L., Zhao, H., Jiang, X. & Kalian, N., 2006, In: International Journal of Computational Methods in Engineering Science and Mechanics. 7, 1, p. 41-57 17 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  39. Published

    Mixture formation and controlled auto-ignition combustion in four-stroke gasoline engines with port and direct fuel injections

    Cao, L., Zhao, H., Jiang, X. & Kalian, N., 08/2005, In: International Journal of Engine Research. 6, 4, p. 311-329 19 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  40. Published

    Heavy vehicle pitch dynamics and suspension control

    Cao, D., 2012.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  41. Published

    Dynamics and control of road vehicles with a tyre failure

    Cao, D., 16/04/2013.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  42. Published

    Numerical Simulation of Icing on Nrel 5-MW Reference Offshore Wind Turbine Blades Under Different Icing Conditions

    Cao, H., Bai, X., Ma, X., Yin, Q. & Yang, X., 30/10/2022, In: China Ocean Engineering. 36, 5, p. 767-780 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  43. Published

    Machine learning-enabled prediction of wind turbine energy yield losses due to general blade leading edge erosion

    Cappugi, L., Castorrini, A., Bonfiglioli, A., Minisci, E. & Campobasso, S., 1/10/2021, In: Energy Conversion and Management. 245, 17 p., 114567.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  44. Published

    Oxidation-reduction reactions of simple hydroxamic acids and plutonium(IV) ions in nitric acid

    Carrott, M. J., Fox, O. D., LeGurun, G., JONES, C. J., Mason, C., Taylor, R., Andrieux, F. & Boxall, C., 31/03/2008, In: Radiochimica Acta. 96, 6, p. 333-343 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  45. Published

    Assessing wind turbine energy losses due to blade leading edge erosion cavities with parametric CAD and 3D CFD

    Castorrini, A., Cappugi, L., Bonfiglioli, A. & Campobasso, S., 28/09/2020, In: Journal of Physics: Conference Series. 1618, 11 p., 052015.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  46. Published

    Low Head Hydropower Developments.

    Cattley, R., Widden, M. B. & Aggidis, G. A., 2005, In: Proceedings of the world renewable energy congress.

    Research output: Contribution to Journal/MagazineJournal article

  47. Published

    Harmonic balance Navier-Stokes analysis of tidal stream turbine wave loads

    Cavazzini, A., Campobasso, M. S., Marconcini, M., Pacciani, R. & Arnone, A., 1/03/2019, Recent Advances in CFD for Wind and​ Tidal Offshore Turbines: Springer Tracts in Mechanical Engineering. Ferrer, E. & de Montflaur, A. (eds.). 2nd ed. ed. Cham: Springer International Publishing, p. 37-49 13 p. (Springer Tracts in Mechanical Engineering).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  48. Published

    Machine learning-aided assessment of wind turbine energy losses due to blade leading edge damage

    Cavazzini, A., Minisci, E. & Campobasso, M. S., 13/12/2019, ASME 2019 2nd International Offshore Wind Technical Conference. The American Society of Mechanical Engineers, 14 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  49. Published

    Criticality of the [C(4)mim] [BF4] plus water system

    Cerdeirina, CA., Troncoso, N. V., Ramos, CP., Romani, L., Najdanovic-Visak, V., Guedes, HJR., Esperanca, JMSS., Visak, ZP., da Ponte, MN. & Rebelo, LPN., 2005, Ionic liquids III: fundamentals, progress, challenges, and opportunities. Rogers, R. D. & Seddon, K. R. (eds.). Washington, D. C.: American Chemical Society, p. 175-186 12 p. (ACS Symposium Series; vol. 901).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  50. Published

    Control systems for WRASPA.

    Chaplin, R., Rahmati, R., Gunura, K., Ma, X. & Aggidis, G. A., 06/2009. 93 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  51. Published

    WRASPA: Wave Interactions and Control for Pitching-Surge Point-Absorber Wave Energy Converters.

    Chaplin, R. V. & Aggidis, G. A., 09/2007. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  52. Published

    An Investigation into Power from Pitch-Surge Point-Absorber Wave Energy Converters.

    Chaplin, R. V. & Aggidis, G. A., 05/2007, International Conference on Clean Electrical Power, 2007. ICCEP '07.. IEEE, p. 520-525 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  53. Published

    Circulating Particulate Bed Cathode for Metal Recovery

    Cheng, C-Y., Dawson, R., Kelsall, G. & Robson, A., 31/08/2006. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  54. Published

    Electrochemical Reactors for Metal Recovery from Aqueous Halide Electrolyte Solutions

    Cheng, C-Y., Dawson, R., Kelsall, G. & Robson, A., 25/02/2007, p. 349. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  55. Published

    Development of fusion blanket technology for the DEMO reactor

    Colling, B. R. & Monk, S. D., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1370-1372 3 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  56. Published

    A structured approach to the simplification of optimization problems in a virtual prototyping environment.

    Comerford, D. P. & Quayle, S. D., 2004, Proceedings of the 5th national conference on rapid design, prototyping and manufacture. p. 37-44 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  57. Published

    The impact of hybrid and electric powertrains on vehicle dynamics, control systems and energy regeneration

    Crolla, D. & Cao, D., 2012, In: Vehicle System Dynamics. 50, Supp. 1, p. 95-109 15 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  58. Published

    The impact of hybrid and electric powertrains on vehicle dynamics and control systems

    Crolla, D. & Cao, D., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  59. Published

    Feed-forward control of a nonlinear power take-off simulation for wave energy conversion.

    Cross, P., Taylor, C. J. & Aggidis, A., 2009, 20th International Conference on Systems Engineering.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  60. Published

    Continuous-time feed-forward proportional-integral-plus control.

    Cross, P., Taylor, C. J. & Aggidis, G. A., 09/2010, UKACC International Conference Control 2010. Burnham, K. J. & Ersanilli, V. E. (eds.). p. 229-234 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  61. Published

    State dependent feed-forward control for wave energy conversion

    Cross, P., Taylor, J. & Aggidis, G., 2011, 9th European Wave and Tidal Energy Conference. EWTEC

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  62. Published

    State dependent parameter model-based condition monitoring for wind turbines

    Cross, P. & Ma, X., 2013, Proceedings of the 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies (CM 2013 & MFPT 2013). BINDT, 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  63. Published

    Feature selection for artificial neural network model-based condition monitoring of wind turbines

    Cross, P. & Ma, X., 2013, Proceedings of the 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies (CM 2013 & MFPT 2013). BINDT, 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  64. Published

    Model-based condition monitoring for wind turbines

    Cross, P. & Ma, X., 2013, Automation and Computing (ICAC), 2013 19th International Conference on. IEEE, 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  65. Published

    Nonlinear system identification for model-based condition monitoring of wind turbines

    Cross, P. & Ma, X., 11/2014, In: Renewable Energy. 71, p. 166-175 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  66. Published

    Model-based and fuzzy logic approaches to condition monitoring of operational wind turbines

    Cross, P. & Ma, X., 02/2015, In: International Journal of Automation and Computing. 12, 1, p. 25-34 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  67. Published

    Linear Frequency Domain and Harmonic Balance Predictions of Dynamic Derivatives

    Da Ronch, A., McCracken, A., Badcock, K., Widhalm, M. & Campobasso, S., 2013, In: Journal of Aircraft. 50, 3, p. 694-707 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  68. Published

    Photocatalysed degradation of a herbicide derivative, Dinoterb, in aqueous suspension

    Dar, A. A., Umar, K., Mir, N. A., Haque, M. M., Muneer, M. & Boxall, C., 07/2011, In: Research on Chemical Intermediates. 37, 6, p. 567-578 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  69. Published

    Recovery of platinum group metals from secondary materials. I. Palladium dissolution in iodide solutions

    Dawson, R. & Kelsall, G., 1/01/2007, In: Journal of Applied Electrochemistry. 37, 1, p. 3-14 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  70. Published

    Recovery of platinum group metals for spent alumina supported catalysts

    Dawson, R. & Kelsall, G., 3/10/2005, 7th European Symposium in Electrochemical Engineering.. p. 449-454 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  71. Unpublished

    The electrochemcial recovery of platinum and palladium from spent alumina supported catalysts

    Dawson, R., 1/12/2006, (Unpublished) University of London. 237 p.

    Research output: ThesisDoctoral Thesis

  72. Published

    Electrochemical recovery of precious metals from alumina-supported catalysts

    Dawson, R. & Kelsall, G., 24/03/2004.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  73. Published

    Recovery of platinum group metals for spent alumina supported catalysts

    Dawson, R. & Kelsall, G., 9/11/2004.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  74. Published

    Recovery of metal ions from dilute solutions using a spouted bed cathode

    Dawson, R. & Kelsall, G., 13/09/2004.

    Research output: Contribution to conference - Without ISBN/ISSN Other

  75. Published

    Electrochemical recovery of precious metals from spent alumina-supported catalysts

    Dawson, R. & Kelsall, G., 5/04/2005.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  76. Published

    Recovery of platinum group metals for spent alumina supported catalysts

    Dawson, R. & Kelsall, G., 5/12/2005.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  77. Published

    Pt dissolution and deposition in high concentration aqueous tri-Iodide/iodide solutions

    Dawson, R. & Kelsall, G., 17/08/2013, In: ECS Electrochemistry Letters. 2, 11, p. D55-D57 3 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  78. Published

    The use of additive manufacture for metallic bipolar plates in polymer electrolyte fuel cell stacks

    Dawson, R., Patel, A., Rennie, A. & White, S., 28/09/2014, In: Chemical Engineering Transactions. 41, p. 175-180 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  79. Published

    An investigation into the use of additive manufacture for the production of metallic bipolar plates for polymer electrolyte fuel cell stacks

    Dawson, R., Patel, A., Rennie, A. & White, S., 07/2015, In: Journal of Applied Electrochemistry. 45, 7, p. 637-645 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  80. Published

    Thermophysical and thermodynamic properties of 1-butyl-3-methylimidazolium tetrafluoroborate and 1-butyl-3-methylimidazolium hexafluorophosphate over an extended pressure range

    de Azevedo, RG., Esperanca, JMSS., Najdanovic-Visak, V., Visak, ZP., Guedes, HJR., da Ponte, MN. & Rebelo, LPN., 2005, In: Journal of Chemical and Engineering Data. 50, 3, p. 997-1008 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  81. Published

    Development of a virtual instrument system for industrial process tomography.

    Deloughry, R., Davenport, I., Ma, X. & Ponnapalli, P. V. S., 09/2003. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  82. Published

    The Quartz Crystal Microbalance as a Microviscometer for Improved Rehabilitation Therapy of Dysphagic Patients.

    Dewar, R. J. & Joyce, M. J., 2005, 27th Annual International Conference of the Engineering in Medicine and Biology Society, 2005. IEEE-EMBS 2005.. p. 2511-2515 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  83. Published

    Use of QCM in fluid applications: performance deterioration with cleaning and choice of surface roughness.

    Dewar, R. & Joyce, M. J., 2004, Proceedings of Electrochem 2004.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  84. Published

    Practical considerations of the QCM as a viscometer within the food industry : performance deterioration with repeated use and surface roughness.

    Dewar, R. J., Ash, D. C., German, M. J. & Joyce, M. J., 08/2006, In: Journal of Food Engineering. 75, 4, p. 461-468 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  85. Published

    The rheology of maize and maltodextrin-based foodstuffs used in dysphagia therapy.

    Dewar, R. J. & Joyce, M. J., 15/08/2006, In: Carbohydrate Polymers. 65, 3, p. 296-305 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  86. Published

    Fabrication and Characterisation of the First Graphene Ring Micro Electrodes (GRIMEs)

    Dickinson, J., Andrieux, F. & Boxall, C., 2012, In: MRS Online Proceedings Library. 1407, 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  87. Published

    Fabrication and Characterisation of the Graphene Ring Micro Electrode (GRiME) with an Integrated, Concentric Ag/AgCl Reference Electrode

    Dickinson, J. W., Bromley, M., Andrieux, F. P. L. & Boxall, C., 14/03/2013, In: Sensors. 13, 3, p. 3635-3651 17 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  88. Published

    Numerical simulation of hydrogen impinging jet flame using flamelet generated manifold reduction

    Dinesh, K. K. J. R., Jiang, X. & van Oijen, J. A., 03/2012, In: International Journal of Hydrogen Energy. 37, 5, p. 4502-4515 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  89. Published

    Analysis of impinging wall effects on hydrogen non-premixed flame

    Dinesh, K. K. J. R., Jiang, X. & van Oijen, J. A., 2012, In: Combustion Science and Technology. 184, 9, p. 1244-1268 25 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  90. Published

    Nitric oxide pollutant formation in high hydrogen content (HHC) syngas flames

    Dinesh, K. K. J. R., van Oijen, J. A., Luo, K. H. & Jiang, X., 19/10/2015, In: International Journal of Hydrogen Energy. 40, 39, p. 13621-13634 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  91. Published

    Robustness comparison of control systems for a nuclear power plant.

    Ding, L., Bradshaw, A. & Taylor, C. J., 2004, Proceedings of the UKACC international conference on control.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  92. Published

    Design of discrete-time RIDE control system.

    Ding, L., Bradshaw, A. & Taylor, C. J., 2006, Proceedings of the UKACC International Conference on Control.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  93. Published

    Comparison of classical and modern control applied to an excavator-arm.

    Dixon, R., Taylor, C. J. & Shaban, E. M., 2005, International Federation of Automatic Control 16th Triennial World Congress.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  94. Published

    The Design of a Portable Neutron Spectrometer.

    D'Mellow, B., Jarrah, Z. & Joyce, M. J., 2005, Proceedings of the 9th European nuclear conference (ENC 2005).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  95. Published

    Calibration of gas-filled proton recoil detectors.

    D'Mellow, B. & Joyce, M. J., 10/2004, In: Radiation Physics and Chemistry. 71, 3-4, p. 727-729 3 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  96. Published

    Digital calibration of hydrogen-filled proton recoil spherical counters.

    D'Mellow, B. & Joyce, M. J., 2004, Proceedings of the 9th international symposium on radiation physics. Elsevier

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  97. Published

    The replacement of cadmium as a thermal neutron filter.

    D'Mellow, B., Thomas, D. J., Joyce, M. J., Kolkowski, P., Roberts, N. J. & Monk, S. D., 07/2007, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 577, 3, p. 690-695 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  98. Published

    Proton recoil detector and the calibration thereof.

    D'Mellow, B., Joyce, M. J. & D'Mellow, Bob and Joyce, Malcolm J. (Patent applicant), 09/2003, Patent No. GB2422195

    Research output: Patent

  99. Published

    Development of the nSpect portable neutron spectrometer

    D'Mellow, B., Joyce, M. J. & Jarrah, A., 2005.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  100. Published

    Development of Multi-Oscillating Water Columns as Wave Energy Converters

    Doyle, S. & Aggidis, G. A., 1/06/2019, In: Renewable and Sustainable Energy Reviews. 107, p. 75-86 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

Previous 1 2 3 4 5 6 7 8 ...10 Next

Back to top