School of Engineering

View graph of relations

Faculty of Science and Technology

Show 14 centres, groups and clusters

Hide 14 centres, groups and clusters

301 - 400 out of 6,515Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Type

Chapter
Published
Developments in the use of electromagnetic methods to monitor the transformation of steel samples.
Binns, R., Johnstone, S., Morris, P. F., Peyton, A. J. & Pritchard, W. D. N., 2000, Proceedings of the institute of material conference: measurement technology and information management through the process route.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Developments in the use of electromagnetic methods to monitor the transformation of steel samples.
Binns, R. & Peyton, A. J., 2000, Proceedings of the regional symposium on quality and automation (RESQUA 2000). Penang, Malaysia, p. 155-162 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The quartz crystal microbalance: an electronic sensor for dynamic fluid mechanics.
Ash, D., Joyce, M. J. & Port, S. N., 2000, Proceedings of the regional symposium on quality and automation (RESQUA 2000).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Nuclear reprocessing stream analysis using the quartz crystal microbalance.
Ash, D., Joyce, M. J., Port, S. N. & Barnes, C., 2000, Proceedings of the universities nuclear technology forum.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The quartz crystal microbalance: an electronic sensor for dynamic fluid mechanics.
Ash, D., Joyce, M. J., Port, S. N. & Barnes, C., 2000, Proceedings of 2nd conference on postgraduate research in electronics and photonics.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Applications of mixed signal test strategies to next generation microsystems.
Jeffery, C., Rosing, R. & Richardson, A. M. D., 2000, Design, modeling, and simulation in microelectronics. 4228 ed. SPIE (Society of Photo-Optical Instrumentation Engineers), p. 21-32 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A built-in test solution for a SMART silicon micromachined resonant pressure sensor.
Jeffery, C., Rosing, R. & Richardson, A. M. D., 2000, IEEE European Test Workshop. IEEE
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The use of electromagnetic sensors to monitor temperature during strip steel processing.
Papaelias, M. P., Davis, C. L., Peyton, A. J., Strangwood, M. & Binns, R., 2000, Proceedings of the XVI panhellenic national conference in solid state physics. Greece
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Design-for-testability for mixed signal and analogue design.
Richardson, A. M. D. & Lechner, A., 2000, Proceedings of 7th international conference on mixed design of integrated circuits and systems. Poland
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Foam formation in low expansion fire fighting equipment.
Roger, L. E., Widden, M. B. & Osborne, M. J., 2000, Proceedings of the Eurofoam 2000 conference. The Netherlands
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A fault simulation methodology for MEMS.
Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2000, Proceedings of the design automation and test in Europe conference. Paris: IEEE, p. 476-483 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A fault simulation methodology for MEMS.
Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2000, Proceedings of the IEE symposium on quality and automation (RESQUA 2000). Penang, Malaysia
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Uniform and patch loaded steel plates: comparisons between analysis and experiment.
Turvey, G. J. & Osman, M. Y., 2000, Computational steel structures technology. Ivanyi, M., Muzeau, J. P. & Topping, B. H. V. (eds.). Edinburgh: Civil-Comp Press, p. 49-59 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Uniform and patch loaded steel plates – comparisons between analysis and experiment.
Turvey, G. J. & Osman, M. Y., 2000, Proceedings of the 5th international conference on computational structures technology. Leuven
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Reliability and usability improvements to a transportable neutron spectrometer (TNS).
Weaver, J. A., Joyce, M. J., Peyton, A. J. & Roskell, J., 2000, Proceedings of the regional symposium on quality and automation (RESQUA 2000). p. 292-301 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Recent improvements to a transportable neutron spectrometer (TNS).
Weaver, J. A., Joyce, M. J., Peyton, A. J. & Silvie, J., 2000, Proceedings of the international workshop on neutron field spectrometry in science, technology and radiation protection. Pisa
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The introduction of digital processing techniques to a neutron sensing system.
Weaver, J. A., Peyton, A. J., Joyce, M. J. & Silvie, J., 2000, Proceedings of the 2nd conference on postgraduate research in electronics and photonics. p. 30-35 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Using digital signal processing techniques for neutron spectroscopy.
Weaver, J. A., Peyton, A. J., Joyce, M. J. & Silvie, J., 2000, Proceedings of the universities nuclear technology forum. University of Bath
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Economical conversion of low-head hydropower
Widden, M. B. & French, M. J., 2000, Proceedings of the world renewable energy congress VI. Brighton, p. 1611-1614 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Moment – rotation tests on bolted end connections in pultruded GRP beams – tests with stainless steel cleata and an assessment of their performance relative to GRP cleats.
Turvey, G. J., 2000, Proceedings in the ECCM9 (composites – from fundamentals to exploitation). Brighton
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Can 'spirit of place' be a guide to ethical building.
Brook, I., 2000, Ethics and the built environment. Fox, W. (ed.). London; New York: Routledge, 240 p. (Professional ethics).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Dead time (a ghost story).
Wilson, S. T. & Botting, F., 2000, The limits of death : between philosophy and psychoanalysis. Morra, J., Robson, M. & Smith, M. (eds.). Manchester: Manchester University Press, p. 57-78 22 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Stability analysis of a TWT against the reflected signals using alarge-signal model.
Srivastava, V., Joshi, S. N. & Carter, R. G., 2000, 2nd International ICMMT 2000 Conference on Microwave and Millimeter Wave Technology. Beijing: IEEE, p. 80-83 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Combating digital noise in high speed ULSI circuits using binary BCH encoding.
Pamunuwa, D. B., Zheng, L.-R. & Tenhunen, H., 2000, The 2000 IEEE International Symposium on Circuits and Systems, 2000. Proceedings. ISCAS 2000 Geneva.. Geneva: IEEE, Vol. 4. p. 13-16 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Accurate a priori signal integrity estimation using a multilevel dynamic interconnect model for deep submicron VLSI design.
Zheng, L.-R., Pamunuwa, D. B. & Tenhunen, H., 2000, Proceedings of the 26th European Solid-State Circuits Conference, 2000. ESSCIRC '00.. IEEE, p. 352-355 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Error-control coding to combat digital noise in interconnects for ULSI circuits.
Pamunuwa, D. B., Zheng, L.-R. & Tenhunen, H., 1999, Proc. IEEE Norchip Conference Oslo 1999. Norway: IEEE, p. 275-282 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Conceptual design and modelling of a domestic mobile robot.
Yavuz, H. & Bradshaw, A., 1999, Proceedings of the 1999 Lancaster international workshop on engineering design: computer-aided conceptual design ’99 (CACD ’99). Bradshaw, A. & Counsell, J. M. (eds.). Windermere, p. 15-35 21 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Conceptual design and development of a navigation system for a mobile robot.
Yavuz, H., Chandler, A., Bradshaw, A. & Seward, D. W., 1999, Proceedings of the 1999 Lancaster international workshop on engineering design: computer-aided conceptual design ’99 (CACD ’99). Bradshaw, A. & Counsell, J. M. (eds.). Windermere, p. 65-85 21 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Using electromagnetic methods to monitor phase transformation in steel samples.
Binns, R., Johnstone, S., Mallinson, S., Meydan, T. & Peyton, A. J., 1999, Proceedings of the institute of material conference: advances in on-line instrumentation for finishing processes in strip production. London
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Mechatronics knowledge management
Bradshaw, A., 1999, Proceedings of the second world manufacturing conference: keynote speech. Durham
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
CACD and further developments.
Counsell, J. M. & Dawson, D., 1999, Proceedings of the 1999 Lancaster international workshop on engineering design: Computer-aided conceptual design ’99 (CACD ’99). Bradshaw, A. & Counsell, J. M. (eds.). Windermere, p. 165-170 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Some experimental force analysis for automation of excavation by a backhoe excavator.
Hemami, A., Seward, D. W. & Quayle, S., 1999, Proceedings of the 16th IAARC/IFAC/IEEE international symposium on automation and robotics in construction. Madrid, p. 503-508 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Development of electromagnetic tomography (EMT) for industrial applications: part 1: sensor design and instrumentation
Peyton, A. J., Borges, A. R., Oliveira, E., Lyon, G. M. & Yu, Z. Z., 1999, Proceedings of the world congress on industrial process tomography. Buxton
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Global integration of construction automation and robotics.
Seward, D. W., Quayle, S., Mure, N. & Scott, J., 1999, Proceedings of the 16th IAARC/IFAC/IEEE international symposium on automation and robotics in construction. Madrid, p. 11-16 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Fibre Reinforced Polymer Composite Structural Pultrusions and Their End Connections.
Turvey, G. J., 1999, Composites and Plastics in Construction: BRE, Watford, UK, 16th-18th November 1999. RAPRA, p. 1-8 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid bolted connections in pultruded GRP beams and simple frames: part 1
Turvey, G. J., 1999, Proceedings of the COST C1 conference: COST C1: control of the semi-rigid behaviour of civil engineering structural connections. Liege, p. 547-556 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Kinetic modeling of electron transfer processes in colloidal semiconductor photocatalysis
Boxall, C., 1999, Applications of Kinetic Modelling. Compton, R. G. & Hancock, G. (eds.). Elsevier, Vol. 37. p. 281-368 88 p. (Comprehensive Chemical Kinetics).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Environmental impact of the nuclear fuel cycle
Hester, R. E., Harrison, R. M., Joyce, M. J. & Port, S. N., 1999, Environmental impact of power generation. Hester, R. E. & Harrison, R. M. (eds.). Vol. 11. p. 73-96 24 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Mixed-signal custom IC control processors incorporating design for test/self-test.
Grout, I., Burge, S. E. & Winsby, A. J., 09/1998, IEE Colloquium on DSP Chips in Real Time Measurement and Control (Digest No: 1997/301). Leicester: IEEE, p. 1/1-1/4
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid behaviour of civil engineering structural connection.
Mottram, J. T. & Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and application of polymeric composite connections. Brussels/Luxembourg: European Commission, p. 99-99 1 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Integrating the business process with automation through object technology in a foundation company.
Mure, N., Scott, J. N., Seward, D. W. & Quayle, S. D., 1998, Proceedings of ECPPM'98 - the Second European Conference on Product and Process Modelling in the Building Industry. BRE, 581 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Comparison of PI and PDF controls of a manipulator arm.
Nagy, Z. & Bradshaw, A., 1998, Proceedings of the UKACC international conference on control ’98. Swansea, p. 739-744 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Development of a safety manager for an autonomous mobile robot.
Pace, C. & Seward, D., 1998, Proceedings of the 29th international symposium on robotics 1998: advanced robotics beyond 2000. Birmingham, p. 277-282 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An approach to realistic fault prediction and layout design for testability in analogue circuits.
Prieto, J., Richardson, A. M. D., Rueda, A. & Grout, I., 1998, Proceedings of the conference on design, automation and test in Europe. Paris, p. 906-912 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Schemebuilder mechatronics.
Porter, I., 1998, Proceedings of the engineering design conference ’98: design reuse. Brunel University, p. 561-568 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Knowledge representation for mechatronic systems.
Porter, I., Counsell, J. M. & Shao, J., 1998, Computer Aided Conceptual Design ’98: proceedings of the 1998 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. M. (eds.). p. 181-196 16 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Design for testability strategies for mixed signal and analogue designs: from layout to system.
Richardson, A. M. D., Lechner, A. & Olbrich, T., 1998, Proceedings of the 5th IEEE international conference on electronics, circuits and systems. Lisbon, p. 425-433 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An integrated diagnostic reconfiguration (IDR) technique for fault tolerant mixed signal microsystems.
Sharif, E., Dorey, A. P. & Richardson, A. M. D., 1998, Proceedings of the IEEE international circuits and systems symposium. IEEE
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Frame connections.
Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 27-49 23 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Plate-to-plate mechanical: part II: testing and applications.
Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 15-26 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Recent developments in testing, design analysis and modelling of bolted connections in pultruded GRP frames made of open-section profiles.
Turvey, G. J., 1998, Proceedings of the 4th EPTA world pultrusion conference. European Pultrusion Technology Association, p. 14
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid connection in pultruded GRP frame structures.
Turvey, G. J. & Cooper, C., 1998, Mechanics of composite materials and structures. Mota Soares, C. A. ,., Mota Soares, A. M. & Freitas, M. J. M. (eds.). p. 151-166 16 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid connections and their effects on the sway response of pultruded GRP columns in low-rise construction.
Turvey, G. J. & Cooper, C., 1998, Proceedings of the 2nd international conference on composites in infrastructure (ICCI ’98). University of Arizona, p. 221-235 15 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Non-linear controller design for a highly coupled VSTOL aircraft.
Bennett, D., Burge, S. E. & Bradshaw, A., 1998, Proceedings of the UKACC international conference on control ’98. Swansea, p. 1510-1515 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A design for testability study on a high performance automatic gain control circuit.
Lechner, A., Richardson, A. M. D., Hermes, B. & Ohletz, M., 1998, Proceedings of the 16th IEEE VLSI test symposium. IEEE, p. 376-385 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Design for testability strategies for a high performance gain control circuit.
Lechner, A., Richardson, A. M. D., Hermes, B. & Perkins, A., 1998, Proceedings of the international IEEE mixed signal test workshop. The Hague
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A knowledge based mechatronics approach to controller design.
Bradshaw, A. & Counsell, J. M., 1998, Proceedings of the UKACC international conference on control ’98. Swansea, p. 1723-1727 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Schemebuilder mechatronics: design principles for controller design
Counsell, J. M. & Porter, I., 1998, Proceedings of ICAM ’98. Okayama, Japan
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Schemebuilder mechatronics for flight control systems
Counsell, J. M. & Porter, I., 1998, Computer Aided Conceptual Design ’98: proceedings of the 1998 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. M. (eds.). p. 197-206 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Schemebuilder: CACD for mechanism motion control.
Counsell, J. M., Porter, I. & Duffy, M., 1998, Proceedings of a workshop on power transmission and motion control. University of Bath
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Developments in the piling process through advances in technology
Findlay, J. D., Seward, D. W., Mure, J. N. & Scott, J., 1998, The value of geotechnics in construction. London: Institution of Civil Engineers, 359 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Multi-diagnostic observations of heater-induced effects at pump frequencies close to the electron gyroharmonics.
Honary, F., Stocker, A. J., Robinson, T. R., Rietveld, M. T. & McCrea, I. W., 1997, Proceedings of the 8th EISCAT international workshop. Leicester
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A new methodology for IC product quality estimation.
Olbrich, T., Grout, I., Eben Aimine, Y., Richardson, A. & Contensou, J., 1997, Proceedings of the European design and test conference (ED&TC '97). Paris: IEEE Computer Society Press
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An HF magnetospheric radar for EISCAT
Rietveld, M. T., Honary, F., Robinson, T. R., Thide, B. & Stubbee, P., 1997, Proceedings of the 8th EISCAT international workshop. Leicester
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The development of an interactive simulation of site information technology systems in relation to construction automation.
Scott, J., Bradley, D. A., Seward, D. W., Adelson, R. M. & Pengelly, M., 1997, Proceedings of the 14th international symposium on robotics in construction. Pittsburgh: Carnegie Mellon University, p. 154-165 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Magnetron frequency twinning.
Carter, R. G., Ball, E. M. & Brady, M. B., 1997, Proceedings of the ESA/NATO workshop on microwave tubes for space, military and commercial applications. The Netherlands: ESTEC, p. 127
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Equivalent circuit modelling of helix slow-wave structures.
Carter, R. G. & Wang, P., 1997, Proceedings of the ESA/NATO workshop on microwave tubes for space, military and commercial applications. The Netherlands: ESTEC, p. 127
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Design principles for mechatronic systems.
Counsell, J. M., 1997, Computer aided conceptual design '97: proceedings of the 1997 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. M. (eds.). Lancaster: Lancaster University: Lancaster Engineering Design Centre, p. 17-26 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Computational agent to integrate expert system and simulation language.
da Silva, J. C., Bennett, D. & Counsell, J. M., 1997, Proceedings of the 9th European simulation symposium. Germany
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Computer support environment applying object-oriented methods for hydraulic systems design.
da Silva, J. C. & Cheung, H. F., 1997, Computer aided conceptual design '97: proceedings of the 1997 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. (eds.). Lancaster: Lancaster University: Lancaster Engineering Design Centre, p. 117-131 15 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Validation and certification of civil engineering structural design software.
Dickinson, S. J. & Bradshaw, A., 1997, Proceedings of the worldwide ECCE symposium: computers in the practice of building and civil engineering. Finland
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Multi-instrument case studies of arc dynamics and substorm effects.
Gazey, N. G. J., del Pozo, C. F., Williams, P. J. S., Sedgemore, K. J. F., Honary, F. & Smith, P. N., 1997, Proceedings of the 8th EISCAT international workshop. Leicester
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Full-section yield analysis of uniformly loaded sector plates.
Turvey, G. J. & Salehi, M., 1997, Trends in structural mechanics: theory, practice and education. Roorda, J. & Srivastava, N. K. (eds.). v. 54 ed. Dordrecht; London: Kluwer Academic, p. 289-298 10 p. (Solid mechanics and its applications).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Navigation system design for an individual excavator robot.
Yavuz, H., Bradshaw, A. & Dogantan, Z. S., 1997, Proceedings of Mamkon '97. Istanbul, p. 489-495 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Development of sensor arrays for electromagnetic tomography.
Yu, Z. Z. & Peyton, A. J., 1997, Proceedings of the conference on frontiers in industrial process tomography II. The Netherlands
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The simulation and modelling of safety systems for construction robots.
Zhang, L., Bradley, D. A. & Seward, D. W., 1997, Proceedings of the 14th international symposium on robotics in construction. Pittsburgh: Carnegie Mellon University, p. 224-229 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Developing the safety case for large mobile robots.
Seward, D. W., Quayle, S., Sommerville, I. & Morey, R., 1997, Advances in safety and reliability : proceedings of the ESREL '97 International Conference on Safety and Reliability, 17 - 20 June 1997, Lisbon, Portugal. Soares, C. G. (ed.). Oxford: Pergamon, p. 2293-2300 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Safe systems architectures for autonomous robots.
Sommerville, I., Seward, D. W., Morey, R. & Quayle, S., 1997, Proceedings of the safety critical systems conference. Brighton
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Development of a modular data acquisition system for electrical tomography.
Lyon, G. M. & Peyton, A. J., 1997, Proceedings of the conference on frontiers in industrial process tomography II. The Netherlands
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Development in electromagnetic tomography for industrial applications.
Lyon, G. M., Yu, Z. Z. & Peyton, A. J., 1997, Proceedings of the progress in electromagnetics research symposium: PIERS. Hong Kong
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Trellis decoding of Reed-Solomon codes: a practical approach
Honary, B., Markarian, G. & Marple, S. R., 1997, Communications coding and signal processing: third volume on communication theory and applications. Honary, B., Darnell, M. & Farrell, P. (eds.). Taunton: Research Studies Press Ltd., p. 133-147 15 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
3-D simulation of a soft-landing tilted electric field collector for linear beam tubes.
Kumar, L. & Carter, R. G., 12/1996, Proceedings of the Asia-Pacific microwave conference. New Delhi
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Developments in electromagnetic tomography instrumentation.
Lyon, G., Peyton, A. J., Yu, Z. Z. & Beck, M. S., 06/1996, IEE Colloguium on Advances in electrical Tomography (Digest No: 1196/143). London: IEEE, p. 12/1-12/4
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
LUCIE the robot excavator - design for system safety.
Seward, D. W., Margrave, F. W., Sommerville, I. & Morrey, R., 04/1996, Proceedings of the 1996 IEEE international conference on robotics and automation. Minneapolis: IEEE, Vol. 1. p. 936-968 33 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
System architectures and safety for mobile construction robots.
Seward, D. W. & Quayle, S., 1996, Proceedings of the 13th international symposium on robotics in construction. Tokyo, Japan: Japan Robot Association (JARA), p. 727-732 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The automation of piling rig positioning using satellite GPS.
Seward, D. W., Ward, J., Findlay, J. & Kinniburgh, H., 1996, Proceedings of the 13th international symposium on robotics in construction. Tokyo, Japan: Japan Robot Association (JARA), p. 223-230 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Precise on-site positioning of a piling rig.
Seward, D. W., Ward, J., Findlay, J. & Kinniburgh, H., 1996, Proceedings of the Trimble 1996 surveying and mapping conference. California, p. 183-189 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project
Turvey, G. J., 1996, Structural design of polymer composites: EUROCOMP design code and handbook. Clarke, J. L. (ed.). London: E. and FN Spon, p. 719-741 23 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Lateral buckling tests on pultruded GRP I-section beams with simply supported - simply supported and clamped - simply supported end conditions.
Turvey, G. J. & Brooks, R. J., 1996, Proceedings of the 1st international conference on composites in infrastructure (ICCI '96). University of Arizona, p. 651-664 14 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characterisation of the short term static moment - rotation response of bolted connections between pultruded GRP beam and column WF-sections.
Turvey, G. J. & Cooper, C., 1996, Proceedings of the 2nd international conference on advanced composite materials in bridges and structures (ACMBS II). Montreal: Canadian Society for Civil Engineering, p. 927-934 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid pultruded GRP frame connections: tests to determine static moment-rotation characteristics.
Turvey, G. J. & Cooper, C., 1996, ECCM-7 Seventh European Conference on Composite Materials : realising their commercial potential. Bader, M. (ed.). Cambridge: Woodhead Publishing Limited, p. 295-300 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Full-range response of circular steel plates subjected to combined transverse pressure and edge compression.
Turvey, G. J. & Drinali, H., 1996, Advances in computational techniques for structural engineering. Topping, B. H. V. (ed.). Edinburgh: Civil-Comp Press, 313 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
On development of a transputer based robot control system.
Nagy, Z. & Bradshaw, A., 1996, Proceedings of the 5th international workshop on robotics in Alpe-Adria-Danube region. Rudas, I. J. (ed.). Budapest: Hungarian Robotics Association, p. 125-130 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A flexible real-time transputer based control system.
Nagy, Z. & Bradshaw, A., 1996, Proceedings of the 5th UK mechatronics forum international conference. Portugal
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A flexible, transputer based robot control.
Nagy, Z. & Bradshaw, A., 1996, Proceedings of the international workshop on advanced robotics and intelligent machines. Manchester
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A transputer based, flexible, real-time control system for robotic manipulators.
Nagy, Z. & Bradshaw, A., 1996, Proceedings of the UK UKACC international conference on control '96. Exeter
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Defect-oriented vs. chematic-level based fault simulation for mixed-signal ICs.
Olbrich, T., Perez, J., Grout, I., Richardson, A. & Ferrer, C., 1996, Proceedings of the international test conference 1996. Washington DC, p. 511-520 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An infrared sensor for an electric wheelchair obstacle avoidance system.
Brown, M. W., Burge, S. E. & Bradley, D. A., 1996, Proceedings of the 5th mechatronics forum international conference. Portugal, p. 35-40 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Action-centred learning in industry.
Carter, R. G., Cooke, F. & Neal, R., 1996, Management of independent learning. Knight, P. & Tait, J. (eds.). Routledge, 164 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Modelling of an integrated supermarket refrigeration and heating system using natural refrigerants.
Castle, T. & Anderson, D. C., 1996, Proceedings of the 6th international refrigeration conference. Indiana
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Previous 1 2 3 4 5 6 7 8 ...66 Next

Research

School of Engineering

Quick Links

Connect With Us