Home > Research > Engineering > Publications & Outputs
View graph of relations
  1. Chapter
  2. Published

    Delivering a low-carbon electricity system in a liberalised market

    Kemp, R. J., 07/2016, Delivering Energy Law and Policy in the EU and the US: a reader. Heffron, R. & Little, G. (eds.). Edinburgh: Edinburgh University Press, p. 163-171 9 p. 32

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  3. Published

    Greener and sustainable approach for the synthesis of commercially important epoxide building blocks using polymer-supported Mo(VI) complexes as catalysts

    Mohammed, ML. & Saha, B., 10/05/2016, Ion Exchange and Solvent Extraction: A Series of Advances. Sengupta, A. K. (ed.). Boca Raton: CRC Press, Vol. 22. p. 65-97 33 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  4. Published

    Quantitative risk management and its limits: a UK engineering perspective

    Kemp, R. J., 2016, Routeledge Handbook of Risk Studies. Burgess, A., Alemanno, A. & Zinn, J. O. (eds.). London: Routledge, p. 164-176 13 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  5. Published

    Crab Cavity Development

    Burt, G. C., 10/2015, The High Luminosity Large Hadron Collider: The New Machine for Illuminating the Mysteries of Universe. Brüning, O. & Rossi, L. (eds.). World Scientific, (Advanced Series on Directions in High Energy Physics; vol. 24).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  6. Published

    Metamaterials with negative Poisson’s ratio: a review of mechanical propterties and deformation mechanisms

    Hou, X. & Silberschmidt, V., 10/04/2015, Mechanics of Advanced Materials: Analysis of Properties and Performance. Silberschmidt, V. V. & Matveenko, V. P. (eds.). Springer International Publishing, p. 155-179 25 p. (Engineering Materials).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  7. Published

    Harnessing the selective catalytic action of supported gold in hydrogenation applications

    Wang, X., Li, M. & Keane, M. A., 2014, Heterogeneous Gold Catalysts and Catalysis. Ma, Z. & Dai, S. (eds.). Royal Society of Chemistry (Great Britain), p. 424-461 38 p. (RSC Catalysis Series).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  8. Published

    Strength/elongation optimisation in alloys: A case for accelerated metallurgy research

    Nava, E. I. G., Toda-Caraballo, I. & Rivera-Diaz, P. E. J. D. C., 1/01/2013, TMS 2013 142nd Annual Meeting and Exhibition, Annual Meeting. Wiley-Blackwell, p. 319-326 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  9. Published

    Symmetry in material property relationships: A tool for the discovery of new alloys

    Toda-Caraballo, I., Galindo, E. I. N. & Rivera-Díaz, P. E. J. D. C., 1/01/2013, TMS 2013 142nd Annual Meeting and Exhibition, Annual Meeting. Wiley-Blackwell, p. 311-318 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  10. Published

    Flow visualization in gas-solid packed beds by spatially resolved near-infrared imaging

    Aiouache, F., Nic An tSaoir, M. & Luis Abreu Fernandes, D., 1/01/2012, Single and Two-Phase Flows on Chemical and Biomedical Engineering. Dias, R., Lima, R., Martins, A. A. & Mata, T. M. (eds.). Bentham Science Publishers Ltd., p. 332-360 29 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  11. Published

    Nanoparticles, Properties, and Applications in Glass Ionomer Cements

    Khan, A. S., Khan, M. & Rehman, I. U., 2012, Nanobiomaterials in Clinical Dentistry. Elsevier Inc., p. 93-108 16 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  12. Published

    Multi-state dependent parameter model identification and estimation

    Tych, W., Sadeghi, J., Smith, P. J., Chotai, A. & Taylor, C. J., 2012, System Identification, Environmental Modelling, and Control System Design. Wang, L. & Garnier, H. (eds.). London: Springer, p. 191-210 20 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  13. Published

    Rebound of a particle from a surface with a viscous and nonlinear viscoelastic liquid in the contact zone

    Bowen, J., Cheneler, D., Andrews, J., Wu, C., Ward, M. & Adams, M., 2012, Discrete element modelling of particulate media. Wu, C. (ed.). Cambridge: RSC Publishing, p. 86-94 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  14. Published

    Analysis of a coupled-mass microrheometer

    Cheneler, D., 2012, Advances in microfluidics. Kelly, R. T. (ed.). Bejing, China: InTech, p. 50-70 21 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  15. Published

    The influence of wetting on the buoyancy of particles

    Bowen, J., Cheneler, D., Ward, M. & Adams, M., 2012, Particulate materials: synthesis, characterisation, processing and modelling. Wu, J. & Ge, W. (eds.). Cambridge: RSC Publishing, p. 213-218 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  16. Published

    Linear and nonlinear non-minimal state space control system design.

    Taylor, C. J., Chotai, A. & Tych, W., 2012, System Identification, Environmental Modelling and Control System Design. Wang, L. & Garnier, H. (eds.). London: Springer, p. 559-582 24 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  17. Published

    SSpace: A flexible and general state space toolbox for MATLAB.

    Taylor, C. J. & Pedregal, D. J., 2012, System Identification, Environmental Modelling and Control System Design. Wang, L. & Garnier, H. (eds.). London: Springer, p. 615-636 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  18. Published

    Thermomechanical Processing Design of Nanoprecipitate Strengthened Alloys Employing Genetic Algorithms

    Rivera-Diaz-del-Castillo, P. E. J., de Jong, M. & Sluiter, M. H. F., 20/04/2011, Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling. John Wiley and Sons Inc., Vol. 2. p. 477-484 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  19. Published

    Determination of the Constants of Formation of Complexes of Iron(III) and acetohydroxamic acid

    Andrieux, F., Boxall, C. & Taylor, R., 01/2011, Applications of Thermodynamics to Biological and Materials Science. Mizutani, T. (ed.). Rijeka, Croatia: InTech, p. 441-458 17 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  20. Published

    Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites

    Turvey, G., 2011, Composite joints and connections: principles, modelling and testing. Camanho, P. & Tong, L. (eds.). Cambridge: Woodhead Publishing Limited, p. 77-111 35 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  21. Published

    Dental regeneration

    Rehman, I. U. & Khan, A. S., 2011, Electrospinning for Tissue Regeneration. Elsevier Inc., p. 280-297 18 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  22. Published

    An on-line monitoring technique for electrode degradation in bio-fluidic microsystems.

    Al-Gayem, Q., Liu, H., Richardson, A. M. D., Burd, N. & Kumar, M., 10/2010, Proceedings of the 2010 IEEE International Test Conference (ITC). Austin, Texas: IEEE, p. 1-10 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  23. Published

    Laser direct metal deposition: theory and applications in manufacturing and maintenance

    Pinkerton, A. J., 2010, Advances in laser materials processing : technology, research and applications. Lawrence, J. (ed.). Oxford: Woodhead Publishing Limited

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  24. Published

    Compact modelling of through-silicon vias (TSVs) in three-dimensional (3-D) integrated circuits.

    Weerasekera, R., Grange, M., Pamunuwa, D. B., Tenhunen, H. & Zheng, L-R., 10/2009, Proceedings of the IEEE International Conference on 3D System Integration (3D IC), 2009. San Francisco: IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  25. Published

    Scalability of Network-on-Chip communication architecture for 3-D meshes.

    Weldezion, A. Y., Grange, M., Pamunuwa, D. B., Lu, Z., Jantsch, A., Weerasekera, R. & Tenhunen, H., 12/06/2009, Proc. ACM/IEEE International Symposium on Networks on Chip (NOCS). San Diego: IEEE, p. 114-123 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  26. Published

    Conceptual design of a 1MW 175MHz CW magnetron.

    Carter, R. G., 04/2009, 2009 IEEE International Vacuum Electronics Conference. Piscataway, NJ, USA: IEEE, 566 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

Previous 1 2 3 4 5 6 7 8 ...211 Next

Back to top