School of Engineering

View graph of relations

Faculty of Science and Technology

Show 14 centres, groups and clusters

Hide 14 centres, groups and clusters

801 - 900 out of 6,515Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Author last name

Published
Accuracy of design sensitivity for optimization of structural using small strain theory by finite element method
Bhagate, K. A., Pawar, P., Singh , A. K. & Ye, J., 2006, III European Conference on Computational Mechanics : Solids, Structures and Coupled Problems in Engineering: Book of Abstracts. Motasoares, C. A., Martins, J. A. C., Rodrigues, H. C., Ambrósio, J. A. C., Pina, C. A. B., Motasoares , C. M., Pereira, E. B. R. & Folgado, J. (eds.). Berlin: Springer, p. 711-711 1 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Static shape control using piezoelectric actuator
Bhagate, K., Ye, J. & Singh, A., 2012, Proceedings of the International Conference on Mechanics of Nano, Micro and Macro Compsite Structures: Politecnico di Torino, 19-20 June 2012. Ferreira, A. J. M. & Carrera, E. (eds.). 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
In situ characterisation of surface roughness and its amplification during multilayer single-track laser powder bed fusion additive manufacturing
Bhatt, A., Huang, Y., Leung, C. L. A., Soundarapandiyan, G., Marussi, S., Shah, S., Atwood, R., Fitzpatrick, M. E., Tiwari, M. K. & Lee, P. D., 11/10/2023, In: Additive Manufacturing. 77, 103809.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparison of cement pressurisation in flanged and unflanged acetabular cups
Bhattacharya, R., Attar, F. G., Green, S. & Port, A., 3/02/2012, In: Journal of Orthopaedic Surgery and Research. 7, 1, 5 p., 5.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Numerical & Experimental Flow Analysis of a Wave Energy Converter.
Bhinder, M. A., Rahmati, M. T., Aggidis, G. A., Mingham, C. G., Chaplin, R. V. & Causon, D. M., 09/2009.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Numerical and Experimental Study of a Point Absorbing Wave Energy Converter in Regular and Irregular Waves.
Bhinder, M. A., Rahmati, M. T., Aggidis, G. A., Chaplin, R. V., Mingham, C. G. & Causon, D. M., 06/2009.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
A Joint Numerical and Experimental Study of a Surging Point Absorbing Wave Energy Converter.
Bhinder, M. A., Rahmati, M. T., Aggidis, G. A., Chaplin, R. V., Mingham, C. G. & Causon, D. M., 2009.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Numerical hydrodynamic modelling of a pitching wave energy converter
Bhinder, M. A., Rahmati, M. T., Mingham, C. G. & Aggidis, G. A., 2015, In: European Journal of Computational Mechanics. 24, 4, p. 129-143 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Greener and Efficient Epoxidation of 1,5-Hexadiene with tert-Butyl Hydroperoxide (TBHP) as an Oxidising Reagent in the Presence of Polybenzimidazole Supported Mo(VI) Catalyst
Bhuiyan, M. M. R., Mohammed, M. & Saha, B., 21/10/2022, In: Reactions. 3, 4, p. 537-552 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Optimisation of greener alkene epoxidation via response surface methodology for effective separation of epoxides from the reaction mixture
Bhuiyan, M. M. R. & Saha, B., 28/06/2023, p. 8. 1 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Optimisation of greener and more efficient 1,7-octadiene epoxidation catalysed by a polymer-supported Mo(vi) complex via response surface methodology
Bhuiyan, M. M. R. & Saha, B., 1/05/2024, In: Reaction Chemistry and Engineering. 9, 5, p. 1036-1046 11 p., D3RE00461A.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Greener and efficient epoxidation process for the synthesis of commercially important epoxides
Bhuiyan, M. M. R. & Saha, B., 6/07/2022. 1 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Optimization of greener epoxidation process catalysed by polymer-supported Mo(VI) complex via response surface methodology
Bhuiyan, M. M. R. & Saha, B., 5/03/2024.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Green epoxidation of 1,7-octadiene with polymer-supported Mo(VI) catalyst via response surface methodology
Bhuiyan, M. M. R. & Saha, B., 16/04/2024.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Optimisation of sustainable epoxidation process using polybenzimidazole supported Mo(VI) complex as a catalyst via response surface methodology
Bhuiyan, M. M. R. & Saha, B., 10/07/2024, p. 55-57. 3 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Greener and efficient epoxidation process for the synthesis of a commercially important epoxide
Bhuiyan, M. M. R. & Saha, B., 29/09/2022.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Comparative Study of Greener Alkene Epoxidation Using a Polymer-Supported Mo(VI) Complex: Performance Evaluation and Optimisation via Response Surface Methodology
Bhuiyan, M. M. R. & Saha, B., 24/03/2025, In: Reactions. 6, 2, p. 1-19 19 p., 22.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Sustainable Epoxidation of 1,5-Hexadiene in a Continuous Flow Reactor: Process Optimisation Using Response Surface Methodology
Bhuiyan, M. M. R., Cormack, P. & Saha, B., 24/04/2025, p. 1-2. 2 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Editorial: Rapid Design, Prototyping and Manufacturing
Bibb, R. (Guest editor) & Rennie, A. E. W. (Guest editor), 01/2017, In: International Journal of Rapid Manufacturing. 6, 2-3, p. 95-96 2 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Modelling leaky photonic wires: A mode solver comparison
Bienstman, P., Selleri, S., Rosa, L., Uranus, H. P., Hopman, W. C. L., Costa, R., Melloni, A., Andreani, L. C., Hugonin, J. P., Lalanne, P., Pinto, D., Obayya, S., Dems, M. & Panajotov, K., 07/2006, In: Optical and Quantum Electronics. 38, 9-11, p. 731-759 29 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modelling martensitic transformation in titanium alloys: The influence of temperature and deformation
Bignon, M., Bertrand, E., Tancret, F. & Rivera-Díaz-del-Castillo, P. E. J., 1/09/2019, In: Acta Materialia. 7, 17 p., 100382.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Martensite formation in titanium alloys: Crystallographic and compositional effects
Bignon, M., Bertrand, E., Rivera-Díaz-del-Castillo, P. E. J. & Tancret, F., 15/08/2021, In: Journal of Alloys and Compounds. 872, 16 p., 159636.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
NittanySat - a student satellite mission for D-region study and calibration of riometers.
Bilen, S. G., Philbrick, C. R., Escobar, A. C., Schratz, B. C., Thrane, E. V., Gausa, M., Dahle, K., Honary, F., Marple, S., Smith, R., Friedrich, M. & Zilaji, T., 2007, p. 407-412. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Other › peer-review
Published
Cold-test analysis of H-plane and E-plane loaded rectangular slow-ware structure
Billa, L. R., Li, X., Huang, X., Paoloni, C., Muhammad, N. A. & Chen, X., 11/09/2017, 2017 10th UK-Europe-China Workshop on Millimetre Waves and Terahertz Technologies (UCMMT). IEEE, 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
H-Plane and E-Plane Loaded Rectangular Slow-Wave Structure for Terahertz TWT Amplifier
Billa, L. R., Muhammad, N. A. & Chen, X., 04/2016, In: IEEE Transactions on Electron Devices. 63, 4, p. 1722-1727 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Improved Design and Microfabrication of H -Plane and E -Plane Loaded Rectangular Slow-Wave Structure for THz TWT Amplifier
Billa, L. R., Shi, X., Muhammad, N. A. & Chen, X., 05/2017, In: IEEE Transactions on Electron Devices. 64, 5, p. 2383-2389 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Novel rectangular slow-wave circuit for THz traveling wave tubes
Billa, L. R., Muhammad, N. A. & Chen, X., 14/09/2015, 2015 8th UK, Europe, China Millimeter Waves and THz Technology Workshop (UCMMT). IEEE
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Variable aperture horn antenna for millimeter wave wireless communications
Billa, L., Paoloni, C., Letizia, R. & Lewis, E., 27/02/2020, 2019 12th UK-Europe-China Workshop on Millimeter Waves and Terahertz Technologies (UCMMT). IEEE, p. 1-4 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
H - and E -Plane Loaded Slow Wave Structure for W -Band TWT
Billa, L., Akram, M. N., Paoloni, C. & Chen, X., 31/01/2020, In: IEEE Transactions on Electron Devices. 67, 1, p. 309-313 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Assessing catchment-scale erosion and yields of suspended solids from improved temperate grassland.
Bilotta, G. S., Krueger, T., Brazier, R. E., Butler, P., Freer, J., Hawkins, J. M. B., Haygarth, P. M., Macleod, C. J. A. & Quinton, J. N., 2010, In: Journal of Environmental Monitoring. 12, 3, p. 731-739 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
High volumetric and energy densities of methane stored in nanoporous materials at ambient temperatures and moderate pressures
Bimbo, N., Physick, A. J., Noguera-Diaz, A., Pugsley, A., Holyfield, L. T., Ting, V. P. & Mays, T. J., 15/07/2015, In: Chemical Engineering Journal. 272, p. 38-47 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Isosteric enthalpies for hydrogen adsorbed on nanoporous materials at high pressures
Bimbo, N., Sharpe, J. E., Ting, V. P., Noguera-Diaz, A. & Mays, T. J., 02/2014, In: Adsorption-Journal of the International Adsorption Society. 20, 2, p. 373-384 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Analysis of optimal conditions for adsorptive hydrogen storage in microporous solids
Bimbo, N., Ting, V. P., Sharpe, J. E. & Mays, T. J., 20/11/2013, In: Colloids and Surfaces A: Physicochemical and Engineering Aspects. 437, p. 113-119 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Analysis of hydrogen storage in nanoporous materials for low carbon energy applications
Bimbo, N., Ting, V. P., Hruzewicz-Kolodziejczyk, A. & Mays, T. J., 3/08/2011, In: Faraday Discussions. 151, 1-2, p. 59-74 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
High-pressure adsorptive storage in hydrogen in MIL-101 (Cr) and AX-21 for mobile applications: cryocharging and cryokinetics
Bimbo, N., Xu, W., Sharpe, J. E., Ting, V. P. & Mays, T. J., 5/01/2016, In: Materials and Design. 89, p. 1086-1094 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Corrigendum to “High-pressure adsorptive storage of hydrogen in MIL-101 (Cr) and AX-21 for mobile applications: Cryocharging and cryokinetics” [Mater & Des 89 (2016) 1086–1094]
Bimbo, N., Xu, W., Sharpe, J. E., Ting, V. P. & Mays, T. J., 5/02/2016, In: Materials and Design. 91, p. 440 1 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Structure and properties of solution processed hafnium oxide gate dielectrics for their applications in high mobility ZnO based thin film transistors
Bin Esro, M., Afouxenidis, D., Vourlias, G. & Adamopoulos, G., 2014.
Research output: Contribution to conference - Without ISBN/ISSN › Speech
Published
High-mobility ZnO thin film transistors based on solution-processed hafnium oxide gate dielectrics
Bin Esro, M., Vourlias, G., Somerton, C., Milne, W. I. & Adamopoulos, G., 7/01/2015, In: Advanced Functional Materials. 25, 1, p. 134-141 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Low-voltage ZnO thin-film transistors employing Nd2O3 high-k dielectrics deposited by spray pyrolysis in air
Bin Esro, M., Kolosov, O., Vourlias, G., Krier, A., Milne, W. I. & Adamopoulos, G., 2015.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Solution processed a-LaAlO3 gate dielectrics for their applications in thin film transistors employing metal oxide semiconducting channels
Bin Esro, M., Mazzocco, R., Vourlias, G., Krier, A., Milne, W. I., Kolosov, O. & Adamopoulos, G., 2015.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Solution processed lanthanum aluminate gate dielectrics for use in metal oxide-based thin film transistors
Bin Esro, M., Mazzocco, R., Vourlias, G., Kolosov, O., Milne, W. I. & Adamopoulos, G., 22/05/2015, In: Applied Physics Letters. 106, 5 p., 203507.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Solution processed SnO2:Sb transparent conductive oxide as alternative to Indium Tin Oxide for applications in Organic Light Emitting Diodes
Bin Esro, M., Georgakopoulos, S., Lu, H., Vourlias, G., Krier, A., Milne, W. I., Gillin, W. P. & Adamopoulos, G., 28/04/2016, In: Journal of Materials Chemistry C. 4, 16, p. 3563-3570 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Structural and electrical characterization of SiO2 gate dielectrics grown from solutions at moderate temperature in air
Bin Esro, M., Kolosov, O. V., Cho, J. H., Milne, W. I. & Adamopoulos, G., 05/2016.
Research output: Contribution to conference - Without ISBN/ISSN › Speech
Published
Structural and electrical characterization of SiO2 gate dielectrics deposited from solutions at moderate temperatures in air
Bin Esro, M., Kolosov, O. V., Jones, P. J., Milne, W. I. & Adamopoulos, G., 10/01/2017, In: ACS Applied Materials and Interfaces. 9, 1, p. 529-536 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Solution-Processed Neodymium Oxide/ZnO Thin-Film Transistors with Electron Mobility in Excess of 65 cm V−1 s−1
Bin Esro, M., Kolosov, O. V., Stolojan, V., Jones, P. J., Milne, W. I. & Adamopoulos, G., 04/2017, In: Advanced Electronic Materials. 3, 4, 1700025.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Two Dimensional Microwave Tomographic Imaging of Low Water Content Tissues
Bindu , G., Thomas, V., Lonappan, A., Ambattu, P., Anandan, C., Hamsakutty, V. & Mathew, K., 20/09/2005, In: Microwave and Optical Technology Letters. 46, 6, p. 599-601 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Quantifying water in spent fuel assemblies with neutrons: A simulation-based approach
Binnersley, C., Ashley, S. F., Chard, P., Lansdell, A., O'Brien, G., Shaughnessy, P. & Joyce, M. J., 31/03/2022, In: Progress in Nuclear Energy. 145, 25 p., 104110.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multi-frequency electromagnetic impedance spectroscopy for the detection of phase transformation during strip steel cooling.
Binns, R., Crudgington, K., Davis, C. L., Dickinson, S. J., Morris, P. F. & Peyton, A. J., 2002, Proceedings of the metallurgy and materials conference.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Developments in the use of electromagnetic methods to monitor cooling transformations in steel samples.
Binns, R., Davis, C., Dickinson, S. J., Morris, P. F., Peyton, A. J., Papaelias, M. P. H., Pritchard, W. D. N. & Strangwood, M., 2002, Proceedings of the IOM conference: instrumentation to innovation - applications and developments in metal production and use.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Detection of phase transformation in hot strip steel samples using a multi-frequency electromagnetic impedance measuring node.
Binns, R., Dickinson, S. J. & Peyton, A. J., 2001, Proceedings of the 11th conference on sensors and their applications. p. 45-50 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Imaging steel profiles within a pouring nozzle.
Binns, R., Lyons, A. R. A. & Peyton, A. J., 2001, Proceedings of the 2nd world congress on industrial process tomography. p. 138-147 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Imaging molten steel flow profiles.
Binns, R., Lyons, A. R. A., Peyton, A. J. & Pritchard, W. D. N., 08/2001, In: Measurement Science and Technology. 12, 8, p. 1132-1138 7 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Developments in the use of electromagnetic methods to monitor the transformation of steel samples.
Binns, R., Johnstone, S., Morris, P. F., Peyton, A. J. & Pritchard, W. D. N., 2000, Proceedings of the institute of material conference: measurement technology and information management through the process route.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Imaging molten steel flow profiles.
Binns, R., Lyons, A. R. A., Peyton, A. J. & Pritchard, W. D. N., 2000, In: Proceedings of SPIE. 4188, p. 248-293 46 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Developments in the use of electromagnetic methods to monitor the transformation of steel samples.
Binns, R. & Peyton, A. J., 2000, Proceedings of the regional symposium on quality and automation (RESQUA 2000). Penang, Malaysia, p. 155-162 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Using electromagnetic methods to monitor phase transformation in steel samples.
Binns, R., Johnstone, S., Mallinson, S., Meydan, T. & Peyton, A. J., 1999, Proceedings of the institute of material conference: advances in on-line instrumentation for finishing processes in strip production. London
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A forward model for planar array EMT imaging of cylindrical conductors embedded in a non-conducting medium.
Bissessur, Y. & Peyton, A. J., 2002, Proceedings of the 2nd international symposium on process tomography.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Image reconstruction for electromagnetic inductance tomography employing a parameterized finite-element-based forward model.
Bissessur, Y. & Peyton, A. J., 2001, In: Proceedings of SPIE. 4188, p. 261-272 12 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
The Role of Ontologies in Emergent Middleware: Supporting Interoperability in Complex Distributed Systems
Blair, G., Bennaceur, A., Georgantas, N., Grace, P., Issarny, V., Nundloll-Ramdhany, V. & Paolucci, M., 12/2011, Proceedings of ACM/IFIP/USENIX 12th International Middleware Conference (Middleware 2011). Kon, F. & Kermarrec, A.-M. (eds.). Berlin: Springer Verlag, p. 410-430 21 p. (Lecture Notes in Computer Science; vol. 7049).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Adaptive materials: utilising additive manufactured scaffolds to control self-organising material aggregation
Blaney, A., Alexander, J. M., Dunn, N. S., Richards, D. C., Rennie, A. E. W. & Anwar, J., 12/2015, Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference. Rennie, A. & Bibb, R. (eds.). Loughborough: Lancaster University, p. 49-57 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Directing self-assembly to grow adaptive physical structures
Blaney, A., Dunn, N. S., Alexander, J. M., Richards, D., Rennie, A. E. W. & Anwar, J., 8/02/2017, In: International Journal of Rapid Manufacturing. 6, 2-3, p. 114-133 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Adaptive Materials: Utilising additive manufactured scaffolds to control self-organising material aggregation
Blaney, A., Alexander, J., Dunn, N., Richards, D., Rennie, A. & Anwar, J., 2015.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Coupling self-assembling materials with digital designs to grow adaptive structures
Blaney, A., Alexander, J., Dunn, N., Richards, D., Doursat, R., Rennie, A. & Anwar, J., 2016.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
A Review of Worm-like Pipe Inspection Robots: Research, Trends and Challenges
Blewitt, G., Cheneler, D., Monk, S. & Andrew, J., 24/03/2024, In: Soft Science. 4, 13.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
N+ ion implantation of Ti6Al4V alloy and UHMWPE for total joint replacement application.
Boampong, D. K., Green, S. M. & Unsworth, A., 2003, In: Journal of Applied Biomaterials and Biomechanics. 1, p. 164-171 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid production of microwave packaging in Silicon Aluminium by thin-shell electroforming
Bocking, C., Jacobson, D. M. & Rennie, A. E. W., 01/2002, In: Microelectronics International. 19, 1, p. 30-32 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid design, prototyping and manufacture: proceedings of the seventh national conference on
Bocking, C. E. (Editor), Rennie, A. E. W. (Editor) & Jacobson, D. M. J. (Editor), 2006, MJA Print. 134 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid and virtual prototyping and applications: Proceedings of the Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports
Bocking, C. E. (Editor), Rennie, A. (Editor) & Jacobson, D. M. (Editor), 2003, Professional Engineering Publishing. 330 p.
Research output: Book/Report/Proceedings › Book
Published
Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models
Bocking, C. E., Rennie, A. & Bennett, G. R., 08/2000, 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin, p. 469-477 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Electroforming of a Thermojet Master Pattern for use as an Electro-Discharge Machine Electrode
Bocking, C., Rennie, A., Bennett, G. & Lewis, N., 10/2000, Time Compression Technologies 2000 Conference: Proceedings of. Rapid News Publications PLC, p. 151-156 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An Investigation into the Use of Spray Formed Al/Si Metal Matrix Composites for Use as Injection Mould Die Inserts
Bocking, C., Jacobson, D. M. & Rennie, A., 09/2001, Time Compression technologies Conference 2001: Proceedings of. Rapid News Publications PLC, 22 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming
Bocking, C., Jacobson, D. M. & Rennie, A., 06/2001, 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of: iMAPS Strasbourg 2001, "The Millenium Conference". p. 412-415 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
The Fabrication of MMC Electronic Packages using Thin Shell Electroformed (TSE) EDM Electrodes
Bocking, C., Jacobson, D. M., Rennie, A. & Bennett, G., 10/2001. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Thirteenth Conference on
Bocking, C. E. (Editor) & Rennie, A. (Editor), 06/2012, High Wycombe: CRDM Ltd. 109 p.
Research output: Book/Report/Proceedings › Proceedings
Published
Beam dynamics driven design of powerful energy recovery linac for experiments
Bogacz, A., Apsimon, R., Brüning, O., André, K., Holzer, B. J., Hounsell, B., Klein, M., Militsyn, B., Williams, P., Perez Segurana, G., Bailey, I., Setiniyaz, S., Abukeshek, R., Barbagallo, C., Ben Abdillah, M., Bruni, C., Duchesne , P., Duthil , P., Fomin , A. & Guyot, C. & 12 others, Kaabi , W., Michaud, J., Olry , G., Perrot , L., Reynet, D., Roux, R., Stocchi, A., Wurth , S., Abualrob, H., Baylac, M., Bouly, F. & Jacquot, B., 26/03/2024, In: Physical Review Accelerators and Beams. 27, 3, 15 p., 031603.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Distribution ratios of lipase-catalyzed reaction products in ionic liquid supercritical CO2 systems: resolution of 2-octanol enantiomers
Bogel-Lukasik, R., Najdanovic, V., Barreiros, S. & da Ponte, M. N., 2/07/2008, In: Industrial and Engineering Chemistry Research. 47, 13, p. 4473-4480 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Hydrogenation of CO(2)-Expanded Liquid Terpenes: Phase Equilibrium-Controlled Kinetics
Bogel-Lukasik, E., Serbanovic, A., Bogel-Lukasik, R., Banet-Osuna, A., Najdanovic-Visak, V. & da Ponte, M. N., 2009, Gas-expanded liquids and near-critcial media : green chemistry and engineering. Hutchenson, K. W., Scurto, A. M. & Subramaniam, B. (eds.). Washington, D.C.: American Chemical Society, p. 191-201 11 p. (ACS Symposium Series; vol. 1006).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
I&EC 90-Hydrogenation of CO2-expanded liquid terpenes: Phase equilibrium-controlled kinetics
Bogel-Lukasik, E., Serbanovic, A., Bogel-Lukasik, R., Banet-Osuna, A., Najdanovic-Visak, V. & da Ponte, M. N., 19/08/2007, In: Abstracts of Papers of the American Chemical Society. 234, 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
Method for deposition of ceramic films
Bone, A. (Inventor), Dawson, R. (Inventor) & Leah, R. (Inventor), 23/07/2009, IPC No. C04B41/87; C04B41/89; C23C18/12; H01M8/12, Patent No. WO2009090419 (A2)
Research output: Patent
Published
METHOD FOR PREPARING SOFC ELECTROLYTE
Bone, A. (Inventor), Leah, R. (Inventor) & Dawson, R. J. (Inventor), 30/09/2015, Patent No. EA021907 (B1), 30/08/2011, Priority date 13/06/2008, Priority No. EA20110070017 20090430
Research output: Patent
Published
A parallel 3D unstructured implicit RANS solver for compressible and incompressible CFD simulations
Bonfiglioli, A., Campobasso, S., Carpentieri, B. & bollhoefer, M., 2012, Parallel Processing and Applied Mathematics: 9th International Conference, PPAM 2011, Torun, Poland, September 11-14, 2011. Revised Selected Papers, Part II. Wyrzykowski, R., Dongarra, J., Karczewski, K. & Waśniewski , J. (eds.). Berlin: Springer, p. 312-322 11 p. (Lecture Notes in Computer Science; vol. 7203).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Phosphatidylinositol 4,5-bisphosphate specific phospholipase C in Pharbitis nil membranes.
Bonner, P. L. R., Prior, S., Hetherington, A. M. & Lumsden, P. J., 1992, In: Biologia Plantarum. 34, 5-6, p. 367-372 6 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
A BIOMECHANICAL COMPARISON OF DIFFERENT SCREW CONFIGURATIONS IN DISTAL TIBIAL LOCKING PLATES
Bonner, T. J., Green, S. M. & McMurty, I. A., 1/04/2012, In: Journal of Bone and Joint Surgery, British Volume. 94-B, SUPP XXXV, p. 20 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
Process design of continuous biodiesel production by reactive distillation: comparison between homogeneous and heterogeneous catalysts
Boon-anuwat, N.-N., Kiatkittipong , W., Aiouache, F. & Assabumrungrat, S., 06/2015, In: Chemical Engineering and Processing: Process Intensification. 92 , p. 33-44 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Excitation and trapping of lower hybrid waves in striations
Borisov, N. & Honary, F., 3/12/2008, In: Physics of Plasmas. 15, 12, 11 p., 122901.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Trapping of lower hybrid waves in elongated plasma depletions in the earth's ionosphere
Borisov, N. & Honary, F., 31/03/2008, In: Physics Letters A. 372, 14, p. 2440-2445 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Stationary state and relaxation of artificial irregularities excited in ionospheric heating experiments
Borisov, N., Senior, A. & Honary, F., 05/2005, In: Journal of Plasma Physics. 71, 3, p. 315-334 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A microstructure-based model for describing the material properties of Al-Zn alloys during high pressure torsion
Borodachenkova, M., Barlat, F., Wen, W., Bastos, A. & Grácio, J. J., 2015, In: International Journal of Plasticity. 68, p. 150-163 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modeling of the mechanical behavior and texture evolution in Zn alloys during reverse shear loading
Borodachenkova, M., Wen, W., Barlat, F., Pereira, A. & Grácio, J., 2015, In: Journal of Materials Processing Technology. 224, p. 143-148 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Numerical simulation of the mechanical response during strain path change: Application to Zn alloys
Borodachenkova, M., Wen, W., Barlat, F., Pereira, A. & Grácio, J., 2014, In: Procedia Engineering. 81, p. 1300-1305 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Bioloistic delivery of Ca2+ dyes into plant and algal cells.
Bothwell, J. H. F., Brownlee, C., Hetherington, A. M., Ng, C. K.-Y., Wheeler, G. L. & McAinsh, M., 04/2006, In: Plant Journal. 46, 2, p. 327-335 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
LIGA-based Slow Wave Structure for a THz Vacuum Amplifier
Bouamrane, F., Bouvet, T., Megtert, S., Brunetti, F., Mineo, M., Paoloni, C., Tamburri, E., Terranova, M. L., Ulisse, G., Di Carlo, A., Marchesin, R., Pham, K., Durand, A. J., Kotiranta, M., Krozer, V., Guiset, P., De Rossi, A., Schnell, J. P., Legagneux, P. & Dolfi, D. & 6 others, Fiorello, A. M., Dispenza, M., Secchi, A., Zhurbenko, V., Gohier, A. & Cojocaru, C.-S., 06/2011, Proceedings of High Aspect Ratio Micro Structure Conference HARMST 2011. Taiwan, 1 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
LIGA-based Slow Wave Structure for a THz Vacuum Amplifier
Bouamrane, F., Di Carlo, A., Durand, A. J., Kotiranta, M., Krozer, V., Zhurbenko, V., Mineo, M. & Paoloni, C., 2013. 2 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
MXenes as Support for Electrocatalysts towards Oxygen Reduction Reaction in Alkaline Media
Bouscarrat, L., 2023, Lancaster University. 142 p.
Research output: Thesis › Doctoral Thesis
Published
A dynamic model of the jump-to phenomenon during AFM analysis
Bowen, J. & Cheneler, D., 18/12/2012, In: Langmuir. 28, 50, p. 17273-17286 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Application of colloid probe atomic force microscopy to the adhesion of thin films of viscous and viscoelastic silicone fluids
Bowen, J., Cheneler, D., Andrews, J. W., Avery, A. R., Zhang, Z., Ward, M. C. L. & Adams, M. J., 20/09/2011, In: Langmuir. 27, 18, p. 11489-11500 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Controlling thin liquid film viscosity via modification of substrate surface chemistry
Bowen, J., Cheneler, D. & Adams, M., 5/02/2013, In: Colloids and Surfaces A: Physicochemical and Engineering Aspects. 418, p. 112-116 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Direct e-beam lithography of PDMS
Bowen, J., Cheneler, D. & Robinson, A., 09/2012, In: Microelectronic Engineering. 97, p. 34-37 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
On the calibration of rectangular atomic force microscope cantilevers modified by particle attachment and lamination
Bowen, J., Cheneler, D., Walliman, D., Arkless, S. G., Zhang, Z., Ward, M. C. L. & Adams, M. J., 11/2010, In: Measurement Science and Technology. 21, 11, 115106.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rebound of a particle from a surface with a viscous and nonlinear viscoelastic liquid in the contact zone
Bowen, J., Cheneler, D., Andrews, J., Wu, C., Ward, M. & Adams, M., 2012, Discrete element modelling of particulate media. Wu, C. (ed.). Cambridge: RSC Publishing, p. 86-94 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Previous 1...5 6 7 8 9 10 11 12 ...66 Next

Research

School of Engineering

Quick Links

Connect With Us