Home > Research > Structures, Materials and Manufacturing > Publications & Outputs

Research

View graph of relations

Structures, Materials and Manufacturing

351 - 400 out of 969Page size: 50
RSS feed of this list
  1. Published

    A CFD model of laser cladding: From deposition head to melt pool dynamics

    Ibarra-Medina, J., Vogel, M. & Pinkerton, A. J., 2011, Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 378-386 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  2. Published

    A numerical investigation of powder heating in coaxial laser direct metal deposition

    Ibarra-Medina, J. & Pinkerton, A. J., 2010, Proceedings of the 36th International Matador Conference. Hinduja, S. & Li, L. (eds.). London: Springer, p. 455-458 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  3. Published

    Discrete element method for generating random fibre distributions in micromechanical models of fibre reinforced composite laminates

    Ismail, Y., Yang, D. & Ye, J., 1/04/2016, In: Composites Part B: Engineering. 90, p. 485-492 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    A DEM model for visualising damage evolution and predicting failure envelope of composite laminae under biaxial loads

    Ismail, Y., Yang, D. & Ye, J., 1/10/2016, In: Composites Part B: Engineering. 102, p. 9-28 20 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  5. Published

    Discrete element modelling of unidirectional fibre-reinforced polymers under transverse tension

    Ismail, Y., Sheng, Y., Yang, D. & Ye, J., 05/2015, In: Composites Part B: Engineering. 73, p. 118-125 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Unpublished

    A DEM for visualising damage evolution and predicting failure of composite lamina under uniaxial and biaxial loads

    Ismail, Y., 2017, (Unpublished) Lancaster University. 177 p.

    Research output: Thesis › Doctoral Thesis

  7. Published

    An ABAQUS® plug-in for generating virtual data required for inverse analysis of unidirectional composites using artificial neural networks

    Ismail, Y., Wan, L., Chen, J., Ye, J. & Yang, D., 31/10/2022, In: Engineering with Computers. 38, 5, p. 4323-4335 13 p., 5.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    Injection mould tool manufacture in less than five days

    Jacobson, D., Bocking, C. & Rennie, A. E. W., 1/06/2002, 9 p. Society of Manufacturing Engineers.

    Research output: Other contribution

  9. Published

    Rapid design, prototyping and manufacture: Proceedings of the Fifth National Conference on

    Jacobson, D. M. (ed.), Rennie, A. (ed.) & Bocking, C. E. (ed.), 2004, Professional Engineering Publishing. 111 p.

    Research output: Book/Report/Proceedings › Book

  10. Published

    Rapid design, prototyping and manufacture: Proceedings of the Eighth National Conference on

    Jacobson, D. M. (ed.), Bocking, C. E. (ed.) & Rennie, A. (ed.), 2007, MJA Print. 140 p.

    Research output: Book/Report/Proceedings › Book

  11. Published

    Rapid Design, Prototyping and Manufacturing: Proceedings of the Eleventh National Conference on

    Jacobson, D. M. (ed.), Rennie, A. (ed.) & Bocking, C. E. (ed.), 2010, CRDM Ltd. 222 p.

    Research output: Book/Report/Proceedings › Book

  12. Published

    Injection Mould Tool Manufacture in Less Than Five Days

    Jacobson, D. M., Bocking, C. E. & Rennie, A., 03/2002, RAPRA Rapid Tooling Conference 2002: Conference Proceedings. RAPRA, p. 35-43 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  13. Published

    Optimization of mooring line design parameters using Mooring Optimization Tool for FPSO (MooOpT4FPSO) with the consideration of integrated design methodology

    Ja'e, I. A., Ahmed Ali, M. O., Yenduri, A., Amaechi, C. V., Nizamani, Z. & Nakayama, A., 15/11/2022, In: Ocean Engineering. 264, 15 p., 112499.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    Pre-heating of components in cemented total hip arthroplasty

    Jafri, A. A., Green, S. M., Partington, P. F., McCaskie, A. W. & Muller, S. D., 11/2004, In: Journal of Bone and Joint Surgery, British Volume. 86B, 8, p. 1214-1219 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    OPTIMAL PROSTHESIS TEMPERATURE IN CEMENTED TOTAL HIP ARTHROPLASTY

    Jafri, A., Green, S. M., McCaskie, A. W., Partington, P. F. & Muller, S. D., 1/10/2006, In: Journal of Bone and Joint Surgery, British Volume. 88-B, SUPP III, p. 365 1 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  16. Published

    Experimental studies of elliptical concrete-filled tube columns

    Jamaluddin, N., Lam, D. & Ye, J., 2010, TUBULAR STRUCTURES XIII. Young, B. (ed.). BOCA RATON: CRC PRESS-TAYLOR & FRANCIS GROUP, p. 333-340 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  17. Published

    Finite Element Analysis of Elliptical Stub CFT Columns

    Jamaluddin, N., Lam, D. & Ye, J., 2009, Steel Concrete Composite and Hybrid Structures. Lam, D. (ed.). Singapore: Research Publishing Services, p. 265-270 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  18. Published

    An experimental study on elliptical concrete filled columns under axial compression

    Jamaluddin, N., Lam, D., Dai, X. & Ye, J., 08/2013, In: Journal of Constructional Steel Research. 87, p. 6-16 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    The effect of beam geometry on diode laser forming of sheet metals

    Jamil, M. S. C., Pinkerton, A. J., Li, L. & Sheikh, M. A., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 495-502 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  20. Published

    ORTHOPAEDIC BIOPOLYMER WEAR SCREENING RIG VALIDATED AGAINST CLINICAL DATA

    Joyce, T. J., Monk, D., Thompson, P., Chiu, P., Unsworth, A. & Green, S. M., 1/10/2006, In: Journal of Bone and Joint Surgery, British Volume. 88-B, SUPP III, p. 377 1 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  21. Published

    The design & development of a simulator for in vitro testing of metatarsophalangeal prostheses

    Joyce, T. J., Green, S. M. & Unsworth, A., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  22. Published

    Polymeric biomaterial wear test rig validated to ASTM F732-00 and against clinical data

    Joyce, T. J., Monk, D., Thompson, P., Chiu, P., Unsworth, A. & Green, S. M., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  23. Published

    Influence of bovine serum lubricant changeover time on the wear of PTFE biomaterial against stainless steel

    Joyce, T. J., Mendham, K., Green, S. M. & Unsworth, A., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  24. Published

    A new fictitious time for the dynamic relaxation (DXDR) method

    Kadkhodayan, A., Alamatian, J. & Turvey, G. J., 7/05/2008, In: International Journal for Numerical Methods in Engineering. 74, 6, p. 996-1018 23 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    A DXDR large deflection analysis of uniformly loaded square, circular and elliptical orthotropic plates using non-uniform rectangular finite-differences

    Kadkhodayan, M., Alamatian, J., Turvey, G. & Erfani Moghadam, A., 10/2012, In: Journal of Mechanical Science and Technology. 26, 10, p. 3231-3242 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  26. Published

    Influence of melt pool convection on residual stress induced in laser cladding and powder deposition

    Kamara, A. M., Wang, W., Marimuthu, S., Pinkerton, A. J. & Li, L., 2010, Proceedings of the 4th Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  27. Published

    Analysis of failure mechanisms of adhesive joints modified by a novel additive manufacturing-assisted method

    Kanani, A. Y., Wang, X. E., Hou, X., Rennie, A. E. W. & Ye, J., 15/02/2023, In: Engineering Structures. 277, 9 p., 115428.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  28. Published

    A Novel Feature-Based Manufacturability Assessment System for Evaluating Selective Laser Melting and Subtractive Manufacturing Injection Moulding Tool Inserts

    Kashouty, M. F. E., Rennie, A. & Ghazy, M., 22/05/2023, In: Designs. 7, 3, 18 p., 68.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Effects of lactic and citric acid on early-age engineering properties of Portland/calcium aluminate blended cements

    Kastiukas, G., Zhou, X., Castro-Gomes, J., Huang, S. & Saafi, M. B. S., 30/12/2015, In: Construction and Building Materials. 101, 1, p. 389-395 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  30. Published

    Polarities of function and form using additive manufacturing - where the middle ground might be in achieving a creative balance for SMEs

    Kaufman, J., Rennie, A. & Quayle, S., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 135-143 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  31. Unpublished

    Photography and Cloud Computing enabled Replication of Historic Artefacts for fabrication via Additive Manufacturing Technology

    Kaufman, J. & Rennie, A., 18/12/2012, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  32. Published

    Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art

    Kaufman, J., Rennie, A. & Clement, M., 06/2014, Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis (ESDA 2014): Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications. American Society of Mechanical Engineers (ASME), 8 p. ESDA2014-20304

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  33. Published

    Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art

    Kaufman, J., Rennie, A. & Clement, M., 1/03/2015, In: Journal of Computing and Information Science in Engineering. 15, 1, 7 p., 011006.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  34. Published

    Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artefacts

    Kaufman, J., Rennie, A. & Clement, M., 03/2015. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  35. Published

    Touching history: 3D replica artifacts

    Kaufman, J. & Rennie, A., 12/2014, Ancient Egypt, 15, 3, p. 32-33 2 p.

    Research output: Contribution to specialist publication › Article

  36. Published

    Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artifacts

    Kaufman, J., Rennie, A. E. W. & Clement, M., 2015, In: Procedia CIRP. 36, p. 223-229 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    The lost crown of Horus

    Kaufman, J. & Rennie, A. E. W., 04/2015, Ancient Egypt, 15, 5, p. 22-23 2 p.

    Research output: Contribution to specialist publication › Article

  38. Published

    Replication and fabrication of crafted and natural artifacts by reverse engineering using single camera photogrammetry

    Kaufman, J., 2018, Lancaster University. 486 p.

    Research output: Thesis › Doctoral Thesis

  39. Published

    Analysis and simulation of the effects of melt pool flow during laser deposition of a multiphase material

    Khan, M., Vogel, M., Ibarra-Medina, J., Pinkerton, A. J., N'Dri, N. & Megahed, M., 2012, Proceedings of the 31st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper P133

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  40. Published

    A Short Review on 4D Printing

    Khan, F., Celik, H. K., Oral, O. & Rennie, A. E. W., 07/2018, In: International Journal of 3D Printing Technologies and Digital Industry. 2, 2, p. 59-67 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  41. Published

    A Short Review on 4D Printing

    Khan, F., Celik, H. K., Oral, O. & Rennie, A. E. W., 04/2018, 3rd International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2018. Çetinkaya, K., Özsoy, K., Duman, B. & Kayaalp, K. (eds.). Antalya, Turkey, p. 199-203 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  42. Published

    Effect of cartilage thickness mismatch in osteochondral grafting from knee to talus on articular contact pressures: A finite element analysis

    Kılıçaslan, Ö. F., Levent, A., Celik, H. K., Tokgöz, M. A., Köse, Ö. & Rennie, A., 11/06/2021, In: Joint Diseases and Related Surgery. 32, 2, p. 355-362 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Published

    Multi-material additive manufacture of multi-layer ceramic capacitors

    King, B. A. T., Rowan, B., Williams, C., Williams, L., Tubby, D., Rennie, A. E. W. & Dennison, K., 12/2015, p. 79-85. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  44. Published

    Comparison of Galvanometer and Polygon Scanning Systems on Component Production Rates in Selective Laser Sintering

    King, B., Rennie, A. E. W. & Bennett, G. R., 27/04/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  45. Published

    Minimal Waste Galvonometer Field Correction for Additive Manufacturing

    King, B., Bennett, G. R. & Rennie, A., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  46. Published

    An Efficient Triangle Mesh Slicing Algorithm for All Topologies in Additive Manufacturing

    King, B., Rennie, A. & Bennett, G. R., 1/01/2021, In: International Journal of Advanced Manufacturing Technology. 112, p. 1023-1033 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  47. Published

    Evaluation of stress distribution on an endodontically treated maxillary central tooth with lesion restored with different crown materials: A finite element analysis

    Kirmali, O., Icen, G., Celik, H. K. & Rennie, A., 15/02/2024, In: Heliyon. 10, 3, 10 p., e25829.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  48. Published

    On bending of rhombic plates.

    Kobayashi, H., Ishikawa, K. & Turvey, G. J., 1994, Proceedings of the annual conference of Japanese society of civil engineers.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  49. Published

    Elastic small deflection analysis of annular sector mindlin plates.

    Kobayashi, H. & Turvey, G. J., 1994, In: International Journal of Mechanical Sciences. 36, 9, p. 811-827 17 p.

    Research output: Contribution to Journal/Magazine › Journal article

  50. Published

    Nonredundant Raman imaging using optical eigenmodes

    Kosmeier, S., Zolotovskaya, S. A., De Luca, A. C., Riches, A., Herrington, C. S., Dholakia, K. & Mazilu, M., 2014, In: Optica. 1, 4, p. 257-263 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...4 5 6 7 8 9 10 11 ...20 Next

Back to top