Manufacturing

View graph of relations

401 - 500 out of 1,001Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Title

Published
Experimental investigation of the mechanical properties of neoprene coated nylon woven reinforced composites
Aboshio, A., Green, S. & Ye, J., 8/06/2014, Proceedings of the first international conference on mechanics of composites, Stony Brook University, New York.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Experimental investigation on the post-fire cyclic behavior of grouted sleeve connections
Wang, T., Yu, M., Li, X., Yan, Z., Saafi, M. & Ye, J., 12/04/2021, In: Construction and Building Materials. 279, 13 p., 122394.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental research on influence of multi-level loading on axial compression behavior of concrete-filled circular steel tubular short columns
Tong, D., Yu, M., Bao, H. & Ye, J., 1/11/2017, In: Jianzhu Jiegou Xuebao/Journal of Building Structures. 38, p. 241-248 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental research on mechanical behavior of UHPCFST under repeated axial compression
Yu, C., Yu, M., Xu, L., Liu, S., Wang, T. & Ye, J., 31/07/2024, In: Journal of Constructional Steel Research. 218, 108690.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental studies of elliptical concrete-filled tube columns
Jamaluddin, N., Lam, D. & Ye, J., 2010, TUBULAR STRUCTURES XIII. Young, B. (ed.). BOCA RATON: CRC PRESS-TAYLOR & FRANCIS GROUP, p. 333-340 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Experimental study on fire resistance of precast concrete columns with efficient reinforcement
Xu, H., Yu, M., Xue, C., Xu, L. & Ye, J., 1/02/2020, In: Engineering Structures. 204, 14 p., 109947.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental study on motion characterization of CALM buoy hose system under water waves
Amaechi, C. V., Wang, F. & Ye, J., 2/02/2022, In: Journal of Marine Science and Engineering (JMSE). 10, 2, 204.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental Study on Seismic Behavior of Cluster-Reinforced Precast Concrete Columns with Grouting-Anchor Connections
Xu, L. H., Wang, Q. L., Yu, M., Chi, Y., Yang, B., Liu, M. & Ye, J. Q., 1/08/2019, In: Journal of Earthquake and Tsunami. 13, 03n04, 1940007.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental Study on the Thermal-Mechanical Properties and Degradation of Sleeve Grouting Material at Elevated Temperatures
Xue, C., Su, C., Yu, M., Xu, H. & Ye, J., 1/02/2021, In: Journal of Materials in Civil Engineering. 33, 2, 3493.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental study on thermal performance of ultra-high performance concrete with coarse aggregates at high temperature
Xue, C., Yu, M., Xu, H., Xu, L., Saafi, M. & Ye, J., 3/01/2022, In: Construction and Building Materials. 314, Part A, 12 p., 125585.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Explaining microstructural and physical variations in rapid additive manufactured waspaloy parts through the laser-deposition thermal cycle
Pinkerton, A. J., Syed, W. U. H., Karadge, M. & Li, L., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 822-831 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Failure analysis of fiber-reinforced composites subjected to coupled thermo-mechanical loading
Ye, J., Wang, Y., Li, Z., Saafi, M., Jia, F., Huang, B. & Ye, J., 1/03/2020, In: Composite Structures. 235, 13 p., 111756.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Failure of pultruded GRP angle leg junctions in tension
Turvey, G. & Wang, P., 27/07/2009. 11 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Failure of pultruded GRP single-bolt tension joints under hot-wet conditions.
Turvey, G. & Wang, P., 1/02/2007, In: Composite Structures. 77, 4, p. 514-520 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Failure of pultruded GRP WF-section webs in compression - an experimental investigation.
Turvey, G., 2006, Proceedings of the 12th European conference on composite materials (ECCM-12).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Failure of single-lap single-bolt tension joints in pultruded glass fibre reinforced plate
Turvey, G., 13/06/2012. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Fast estimate of the SAR using spline interpolation approach for parallel transmit B1 mapping in ultra-high field MRI
Letizia, R., Ye, J., Grover, P. & Shah, S., 2015.
Research output: Working paper
Published
Fault diagnosis in multi-machine power systems using the Derivative-free nonlinear Kalman Filter
Rigatos, G., Siano, P., Wira, P. & Ma, X., 13/06/2016, Environmental, Energy, and Structural Monitoring Systems (EESMS), 2016 IEEE Workshop on. IEEE, 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Fault diagnosis of a rotor-bearing system under variable rotating speeds using two-stage parameter transfer and infrared thermal images
Shao, H., Li, W., Xia, M., Zhang, Y., Shen, C., Williams, D., Kennedy, A. & De Silva, C. W., 10/09/2021, In: IEEE Transactions on Instrumentation and Measurement. 70, 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fault ride-through analysis and protection of a 2-MW DFIG tidal current turbine
Zhang, D., Chen, Y., Yang, J., Tan, M., Ma, X. & Li, W., 1/09/2015, In: Marine Technology Society Journal . 49, 5, p. 49-57 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
Feasibility study for tomographic walk-through metal detector.
Ma, X., Peyton, A. J. & Lionheart, W. R. B., 01/2007, (Unpublished) Unpublished, 12 p.
Research output: Working paper
Published
Feature detection and monitoring of eddy current imaging data by means of wavelet based singularity analysis.
Ma, X. & Peyton, A. J., 11/2010, In: NDT and E International. 43, 8, p. 687-694 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Feature selection for artificial neural network model-based condition monitoring of wind turbines
Cross, P. & Ma, X., 2013, Proceedings of the 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies (CM 2013 & MFPT 2013). BINDT, 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Femtosecond laser micromachining of fibre Bragg gratings for simultaneous measurement of temperature and concentration of liquids
Alemohammad, H., Toyserkani, E. & Pinkerton, A. J., 21/09/2008, In: Journal of Physics D: Applied Physics. 41, 18, p. - 9 p., 185101.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fibre laser net-shape welding of steels
Eghlio, R. M., Pinkerton, A. J. & Li, L., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 1402-1408 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Fibre laser welding of dissimilar alloys of Ti-6Al-4V and Inconel 718 for aerospace applications
Chen, H.-C., Pinkerton, A. J. & Li, L., 02/2011, In: International Journal of Advanced Manufacturing Technology. 52, 9-12, p. 977-987 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fibre laser welding of Zn-coated steel in Al alloy for next generation lightweight vehicles
Chen, H.-C., Pinkerton, A. J., Li, L. & Mistry, A. T., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper P104
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Fibre Reinforced Polymer Composite Structural Pultrusions and Their End Connections.
Turvey, G. J., 1999, Composites and Plastics in Construction: BRE, Watford, UK, 16th-18th November 1999. RAPRA, p. 1-8 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Filtration efficiency gains by fabrication using additive manufacturing
Burns, N., Vijayakumar, B., Rennie, A. & Geekie, L., 10/2014, Proceedings of the European Conference on Fluid-Particle Separation. 2 p. M3P2
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Finite element analysis of buckling and initial failure loads of short pultruded GRP columns.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the 7th international conference on computational structures technology. p. 57-58 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Finite Element Analysis of Elliptical Stub CFT Columns
Jamaluddin, N., Lam, D. & Ye, J., 2009, Steel Concrete Composite and Hybrid Structures. Lam, D. (ed.). Singapore: Research Publishing Services, p. 265-270 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Finite Element Modelling of Slender Concrete Filled Elliptical Steel Columns
Lam, D., Dai, X., Ye, J. & Jamaluddin, N., 2011, EUROSTEEL 2011, Budapest, Hungary. .
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Finite element modelling on the mechanical behaviour of Marine Bonded Composite Hose (MBCH) under burst and collapse
Amaechi, C. V., Chesterton, C., Butler, H. O., Gu, Z., Odijie, A. C., Wang, F., Hou, X. & Ye, J., 24/01/2022, In: Journal of Marine Science and Engineering (JMSE). 10, 24 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Finite element modelung of semi-rigid composite joints with precast hollow core slabs
Lam, D., Ye, J. Q. & Fu, F., 2006, 8th International Conference on Steel-Concrete Composite and Hybrid Structures, Proceedings. Harbin, China: HARBIN INSTITUTE TECHNOLOGY PUBLISHERS, p. 426-433 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Finite element simulation of low-density thermally bonded nonwoven materials: effects of orientation distribution function and arrangement of bond points
Hou, X., Acar, M. & Silberschmidt, V., 02/2011, In: Computational Materials Science. 50, 4, p. 1292–1298 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fire resistance of concrete-filled steel tube columns with preload: Part II: Numerical and analytical investigation
Yu, M., Wang, T., Huang, W. & Ye, J., 1/09/2019, In: Composite Structures. 223, 110995.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fire resistance of concrete-filled steel tube columns with preload. Part I: Experimental investigation
Yu, M., Wang, T., Huang, W., Yuan, H. & Ye, J., 1/09/2019, In: Composite Structures. 223, 110994.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fire resistance performance of FRP rebar reinforced concrete columns.
Wang, H., Zha, X. & Ye, J., 2009, In: International Journal of Concrete Structures and Materials. 3, 2, p. 111-117 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fire responses and resistance of concrete-filled steel tubular frame structures
Yu, M., Zha, X., Ye, J. & Li, Y., 06/2010, In: International Journal of Structural Stability and Dynamics. 10, 2, p. 253-271 19 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
First accelerator test of vacuum components with laser-engineered surfaces for electron-cloud mitigation
Calatroni, S., Valdivieso, E. G.-T., Neupert, H., Nistor, V., Fontenla, A. T. P., Taborelli, M., Chiggiato, P., Malyshev, O., Valizadeh, R., Wackerow, S., Zolotovskaya, S., Gillespie, W. A. & Abdolvand, A., 20/11/2017, In: Physical Review Accelerators and Beams. 20, 11, 12 p., 113201.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
First-time demonstration of measuring concrete prestress levels with metal packaged bre optic sensors
McKeeman, I., Fusiek, G., Johnston, M., Saafi, M. B. S., Niewczas, P., Walsh, M. & Khan, S., 24/08/2016, In: Smart Materials and Structures. 25, 9, 10 p., 095051.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fixation strength of cemented Birmingham (HA coated, cementless) cups - a biomechanical study
Green, S., Kadakia, A. & Partington, P. F., 2007, Proceedings 8th EFORT congress, Florence, Italy. European Federation of National Associations of Orthopaedics and Traumatology
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Flexural behavior of pultruded glass fibre reinforced polymer composite beams with bolted splice joints
Turvey, G. & Cerutti, X., 01/2015, In: Composite Structures. 119, 1, p. 543-550 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Flexural performance of concrete slabs reinforced with GFRP and subjected to different thermal histories.
El-zaroug, O., Forth, J., Ye, J. & Beeby, A., 2006, 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures. Patras, Greece: University of Patras
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Flexural performance of concrete slabs reinforced with GFRP rebars
Elzaroug, O., Forth, J., Ye, J. & Beeby, A., 2013, In: Civil and Environmental Research. 5, p. 6-11 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Flexure of pultruded glass-fibre-reinforced polymer beams with bonded splice joints
Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 333-344 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Flexure of pultruded GRP beams with semi-rigid end connections.
Turvey, G. J., 12/1999, In: Composite Structures. 47, 1, p. 571-580 10 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Frame connections.
Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 27-49 23 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Free-edge and ply cracking effect in angle-ply laminated composites subjected to in-plane loads
Zhang, D., Ye, J. & Lam, D., 12/2007, In: Journal of Engineering Mechanics. 133, 12, p. 1268-1277 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Free-edge and ply cracking effect in cross-ply laminated composites under uniform extension and thermal loading
Zhang, D., Ye, J. & Sheng, H. Y., 12/2006, In: Composite Structures. 76, 4, p. 314-325 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Free-edge effect in cross-ply laminated hollow cylinders subjected to axisymmetric transverse loads
Ye, J. Q. & Sheng, H. Y., 08/2003, In: International Journal of Mechanical Sciences. 45, 8, p. 1309-1326 18 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Free-edge effect in cross-ply laminated plates under a uniform extension
Sheng, H. Y. & Ye, J. Q., 09/2004, In: Structural Engineering and Mechanics. 18, 3, p. 377-388 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
From art to engineering
O'Hana, S., Pinkerton, A. J. & Shoba, K., 2007, Proceedings of the 21st International Conference on Surface Modification Technologies. Sudarshan, T. S. & Jeandin, M. (eds.). ASM International
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
From Concept to Manufacture: Effective use of CAD and FEA Without Compromising Design Intent
Taylor, S. M., Rennie, A. E. W., Quayle, S. & Rawcliffe, N., 10/06/2005, Rapid Design, Prototyping and Manufacture: Proc. Sixth National Conference on . Rennnie, A., Jacobson, D. & Bocking, C. (eds.). X-CD Technologies Inc, p. 101-107 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Full-range response of circular steel plates subjected to combined transverse pressure and edge compression.
Turvey, G. J. & Drinali, H., 1996, Advances in computational techniques for structural engineering. Topping, B. H. V. (ed.). Edinburgh: Civil-Comp Press, 313 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Full-section yield analysis of uniformly loaded sector plates.
Turvey, G. J. & Salehi, M., 1997, Trends in structural mechanics: theory, practice and education. Roorda, J. & Srivastava, N. K. (eds.). v. 54 ed. Dordrecht; London: Kluwer Academic, p. 289-298 10 p. (Solid mechanics and its applications).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Function Based Design for Rapid Prototyping: A Medical Industry Application for an Ocular Speculum
Lupeanu, M., Brooks, H., Rennie, A., Hill, D. & Neagu, C., 06/2012, 13th Rapid Design, Prototyping & Manufacturing Conference: Proceedings of the . Bocking, C. & Rennie, A. (eds.). High Wycombe: CRDM Ltd, p. 45-53 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Functional analysis for the development of bio-medical products
Lupeanu, M., Neagu, C., Opran, C. & Rennie, A., 10/2012, p. 330-336. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Functional simulation of logic digital system with microprocessor
Ma, X. & Wu, J., 1990, In: Dianli Xitong Zidonghue/Automation of Electric Power Systems. 14, 3, p. 57-64 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Gap-free fibre laser welding of Zn-coated steel on Al alloy for light-weight automotive applications
Chen, H.-C., Pinkerton, A. J., Li, L., Liu, Z. & Mistry, A. T., 02/2011, In: Materials and Design. 32, 2, p. 495-504 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Gas flow visualisation in low aspect ratio packed beds by three-dimensional modelling and near-infrared tomography
Alzahrani, F., Aldehani, M., Rusi, H., McMaster, M., Abreu Fernandes, D. L., Assabumrungrat, S., t Saoir, M. N. A. & Aiouache, F., 30/12/2015, In: Industrial and Engineering Chemistry Research. 54, 51, p. 12714-12729 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Generation of graded porous structures by control of process parameters in the selective laser melting of a fixed ratio salt-metal feedstock
Aboulkhair, N. T., Zhao, G., Hague, R. J. M., Kennedy, A. R., Ashcroft, I. A. & Clare, A. T., 1/07/2020, In: Journal of Manufacturing Processes. 55, p. 249-253 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Generation of propagation-invariant light beams from semiconductor light sources
Sokolovskii, G. S., Dudelev, V. V., Losev, S. N., Zolotovskaya, S., Deryagin, A. G., Kuchinskii, V. I., Rafailov, E. U. & Sibbett, W., 12/2008, In: Technical Physics Letters. 34, 12, p. 1075-1078 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Generation of π modes in semiconductor vertical-cavity surface-emitting lasers
Sokolovskii, G. S., Dudelev, V. V., Monakhov, A. M., Savenko, A. Y., Blokhin, S. A., Deryagin, A. G., Zolotovskaya, S., Kuzmenkov, A. G., Losev, S. N., Luchinin, V. V., Maleev, N. A., Rafailov, E. U., Sibbett, W. & Kuchinskii, V. I., 12/2009, In: Technical Physics Letters. 35, 12, p. 1133-1136 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Generic model of a community-based microgrid integrating wind turbines and photovoltaics
Ma, X., Qin, J. & Wang, Y., 07/2012, p. 3147-3153. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Generic model of a community-based microgrid integrating wind turbines, photovoltaics and CHP generations
Ma, X., Wang, Y. & Qin, J., 12/2013, In: Applied Energy. 112, p. 1475–1482 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Geometry Optimisation of Tools used in Milling of Spherical Surfaces
Neagu, C., Lupeanu, M. & Rennie, A., 07/2011, SIM2011 - Sustainable Intelligent Manufacturing : Proceedings of the 1st International Conference on Sustainable Intelligent Manufacturing. Bartolo, H. (ed.). Leiria, Portugal, p. 87-94 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Graduate Attributes and Generic Skills in Remote Teaching
Gamage, K. A. A., Jeyachandran, K., Dehideniya, S. C. P., Lambert, C. & Rennie, A., 3/03/2023, Scholarly Community Encyclopdeia: Education, Scientific Disciplines. Basel, Switzerland: MDPI AG, 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary
Published
Graphene/fly ash geopolymeric composites as self-sensing structural materials
Saafi, M., Tang, L., Fung, J., Rahman, M., Sillars, F., Liggat, J. & Zhou, X., 2014, In: Smart Materials and Structures. 23, 6, 10 p., 065006.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Guest Editorial: The 36th MATADOR Conference 2010
Pinkerton, A. J., 2012, In: Materials and Manufacturing Processes. 27, 4, p. 363-363 1 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Guidelines on Asset Management of Offshore Facilities for Monitoring, Sustainable Maintenance, and Safety Practices
Amaechi, C. V., Reda, A., Kgosiemang, I. M., Ja'e, I. A., Oyetunji, A. K., Olukolajo, M. A. & Igwe, I. B., 25/09/2022, In: Sensors. 22, 19, 57 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Guidelines on Composite Flexible Risers: Monitoring Techniques and Design Approaches
Amaechi, C. V., Reda, A., Ja'e, I. A., Wang, C. & An, C., 7/07/2022, In: Energies. 15, 14, 45 p., 4982.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Guidelines on Designing Marine Hoses for Oil/Gas Applications
Amaechi, C. V., 28/10/2022.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Hardware and software design for an electromagnetic induction tomography (EMT) system for high contrast metal process applications.
Ma, X., Peyton, A. J., Higson, S. R., Lyons, A. & Dickinson, S. J., 01/2006, In: Measurement Science and Technology. 17, 1, p. 111-118 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Health, safety and biohazards in construction: How safe is the work place? Risks and Hazards in our environment
Amaechi, C. V., 20/11/2016, 1 ed. Germany: LAP LAMBERT Academic Publishing . 141 p.
Research output: Book/Report/Proceedings › Book
Published
High power all-quantum-dot-based external cavity modelocked laser
McRobbie, A. D., Cataluna, M. A., Zolotovskaya, S., Livshits, D. A., Sibbett, W. & Rafailov, E. U., 19/07/2007, In: Electronics Letters. 43, 15, p. 812-813 2 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Horizon 2020 TWEETHER project for W-band high data rate wireless communications
Paoloni, C., Letizia, R., Napoli, F., Ni, Q., Rennie, A., Zimmerman, R., Andre, F., Pham, K., Krozer, V., Magne, F., Burciu, I., Ramirez, A., Rocchi, M., Marilier, M. & Vilar, R., 2015, Vacuum Electronics Conference (IVEC), 2015 IEEE International . IEEE, 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
How additive manufacturing helps in reducing power consumption in pumps
Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 9/08/2013.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
How size affects the mobility of THR wear debris
Green, S., Elfick, A. P. D. & Liu, C., 2001, European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001.. London: European Society for Biomaterials, p. T41
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
How to fix a tibial tubercle osteotomy with distalisation: A finite element analysis
Guneri, B., Kose, O., Celik, H. K., Cakar, A., Tasatan, E. & Rennie, A., 31/08/2022, In: Knee. 37, p. 132-142 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
How to keep it in for longer: innovation in the Critical Care Unit
Laha, S. & Rennie, A., 6/11/2013, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Other
Published
Hybrid and adhesively bonded joints with dissimilar adherends: a critical review
Yousefi Kanani, A., Green, S., Hou, X. & Ye, J., 30/09/2021, In: Journal of Adhesion Science and Technology. 35, 17, p. 1821-1859 39 p.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
Hybrid cement composite-based sensor for in-situ chloride monitoring in concrete structures
Huang, B., Wang, J., Piukovics, G., Zabihi, N., Ye, J., Saafi, M. & Ye, J., 15/06/2023, In: Sensors and Actuators B: Chemical. 385, 10 p., 133638.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Hybrid graphene/geopolymeric cement as a superionic conductor for structural health monitoring applications
Saafi, M. B. S., Piukovics, G. & Ye, J., 20/09/2016, In: Smart Materials and Structures. 25, 10, 11 p., 105018.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Hybrid optical-fibre/geopolymer sensors for structural health monitoring of concrete structures
Perry, M., Saafi, M., Fusiek, G. & Niewczas, P., 24/02/2015, In: Smart Materials and Structures. 24, 4, 8 p., 045011.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Image reconstruction in 3D magnetic induction tomography using a FEM forward model.
Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X., 09/2003. 4 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Imaging internal structure with electromagnetic induction tomography.
Ma, X., Peyton, A. J., Soleimani, M. & Lionheart, W. R. B., 12/03/2007, Instrumentation and Measurement Technology Conference, 2006. IMTC 2006. Proceedings of the IEEE. IEEE, p. 299 -303
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Imaging the flow profile of molten steel through a submerged pouring nozzle.
Ma, X., Peyton, A. J., Binns, R. & Higson, S. R., 09/2003. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Impact Response of Double-Layer Steel-RULCC-Steel Sandwich Panels: Experimental, Numerical, and Analytical Approaches
Zhang, W., Huang, Z., Li, R., Zhao, X. & Ye, J., 1/10/2022, In: Journal of Structural Engineering. 148, 10, 04022165.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Improved control of individual blade pitch for wind turbines
Zhang, D., Cross, P., Ma, X. & Li, W., 15/08/2013, In: Sensors and Actuators A: Physical. 198, p. 8-14 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Improved Durability of a Modular Axial Fixator for Stable and Unstable Proximal Femoral Fractures: A Patient-Specific Finite Element Analysis
Celik, H. K., Icen, M., Ozdemir, H. & Rennie, A. E. W., 9/05/2024, In: Journal of Medical Devices. 18, 1, 22 p., 011007.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Improved filtration using additive manufacturing
Burns, N., Geekie, L., Travis, D., Burns, M., Weston, D. P. & Rennie, A., 07/2014.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Improved Tracheostomy Device
Laha, S. (Inventor), Adiele, A. C. (Inventor), Brewer, D. (Inventor), Ntelis, T. (Inventor), Pitman, S. (Inventor), Rennie, A. (Inventor) & Sheikh, Y. (Inventor), 8/11/2018, IPC No. A61M 16/04 (2006.01), Patent No. PCT/GB2018/051193, 3/05/2018, Priority date 3/05/2017, Priority No. 1707060.8
Research output: Patent
Published
In situ characterisation of surface roughness and its amplification during multilayer single-track laser powder bed fusion additive manufacturing
Bhatt, A., Huang, Y., Leung, C. L. A., Soundarapandiyan, G., Marussi, S., Shah, S., Atwood, R., Fitzpatrick, M. E., Tiwari, M. K. & Lee, P. D., 11/10/2023, In: Additive Manufacturing. 77, 103809.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
In vitro cellular testing of strontium/calcium substituted phosphate glass discs and microspheres shows potential for bone regeneration
Patel, U., Macri-Pellizzeri, L., Zakir Hossain, K. M., Scammell, B. E., Grant, D. M., Scotchford, C. A., Hannon, A. C., Kennedy, A. R., Barney, E. R., Ahmed, I. & Sottile, V., 1/03/2019, In: Journal of Tissue Engineering and Regenerative Medicine. 13, 3, p. 396-405 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
In vitro wear performance of MTP prostheses evaluated on a multi-station metatarso-phalangeal joint simulator
Green, S., Joyce, T., Lee, S. & Unsworth, A., 2007, Proceedings 8th EFORT Congress. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology, p. F837
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Influence of bovine serum lubricant changeover time on the wear of PTFE biomaterial against stainless steel
Joyce, T. J., Mendham, K., Green, S. M. & Unsworth, A., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Influence of melt pool convection on residual stress induced in laser cladding and powder deposition
Kamara, A. M., Wang, W., Marimuthu, S., Pinkerton, A. J. & Li, L., 2010, Proceedings of the 4th Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Infrared laser pulse triggers increased singlet oxygen production in tumour cells
Sokolovski, S. G., Zolotovskaya, S., Goltsov, A., Pourreyron, C., South, A. P. & Rafailov, E. U., 2013, In: Scientific Reports. 3, 7 p., 3484.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Initiation and propagation of transverse cracking in composite laminates
Ye, J. & Zhang, D., 2008, Third International Conference on Engineering Failure Analysis, ICEFA-III, Barcelona. Elsevier
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 1 2 3 4 5 6 7 8 ...11 Next

Research

Manufacturing

Quick Links

Connect With Us