Manufacturing

View graph of relations

701 - 800 out of 1,001Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Title

Published
Pneumatic fluid structure interaction of inflatable offshore fender barriers made of anisotropic hyperelastic composites
Aboshio, A., Ye, J. & Green, S., 2013, Proceedings of the 17th International Conference on Composite Structures, Porto, Portugal, 17-21 June 2013.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Polarities of function and form using additive manufacturing - where the middle ground might be in achieving a creative balance for SMEs
Kaufman, J., Rennie, A. & Quayle, S., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 135-143 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Polymeric biomaterial wear test rig validated to ASTM F732-00 and against clinical data
Joyce, T. J., Monk, D., Thompson, P., Chiu, P., Unsworth, A. & Green, S. M., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Pore-scale numerical investigation of pressure drop behaviour across open-cell metal foams
Carvalho, T. P. D., Morvan, H., Hargreaves, D., Oun, H. & Kennedy, A., 03/2017, In: Transport in Porous Media. 117, 2, p. 311-336 26 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Porosity in wire-arc directed energy deposition of aluminum Formation mechanisms, influencing factors and inhibition strategies
Yi, H., Yang, L., Jia, L., Huang, Y. & Cao, H., 29/03/2024, In: Additive Manufacturing. 84, 104108.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
Porous calcium phosphate glass microspheres for orthobiologic applications
Hossain, K. M. Z., Patel, U., Kennedy, A., Macri-Pellizzeri, L., Sottile, V., Grant, D. M., Scammell, B. E. & Ahmed, I., 05/2018, In: Acta Biomaterialia. 72, p. 396-406 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Porous structures fabrication by continuous and pulsed laser metal deposition for biomedical applications; modelling and experimental investigation
Ahsan, M. N., Paul, C. P., Kukreja, L. M. & Pinkerton, A. J., 1/04/2011, In: Journal of Materials Processing Technology. 211, 4, p. 602-609 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Porous surface structures by continuous and pulsed laser metal deposition for biomedical applications
Pinkerton, A. J., Ahsan, M. N., Paul, C. P. & Kukreja, L. M., 2009, Proceedings of the 23rd International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Postbuckling Analysis of Plates Under Combined Loads by a Mixed Finite Element and Boundary Element Method
Ye, J., 08/1993, In: Journal of Pressure Vessel Technology. 115, 3, p. 262-267 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Potential of New Sustainable Green Geopolymer Metal Composite (GGMC) Material as Mould Insert for Rapid Tooling (RT) in Injection Moulding Process
Yin, A. T. M., Rahim, S. Z. B. A., Abdullah, M. M. A. B., Nabiałek, M., Abdellah, A. E.-H., Rennie, A., Tahir, M. F. M. & Titu, A. M., 19/02/2023, In: Materials. 16, 4, 38 p., 1724.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Potential of Rapid Tooling in Rapid Heat Cycle Molding: A Review
Huzaim, N. H. M., Rahim, S., Musa, L., Abdellah, A. E.-H., Abdullah, M. M. A. B., Rennie, A., Rahman, R., Garus, S., Błoch, K., Sandu, A. V., Vizureanu, P. & Nabiałek, M., 23/05/2022, In: Materials. 15, 10, 39 p., 3725.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Powder Characterization – Methods, Standards and State of the Art
Groarke, R., Vijayaraghavan, R. K., Powell, D., Rennie, A. & Brabazon, D., 1/06/2021, Fundamentals of Laser Powder Bed Fusion of Metals. Yadroitsev, I., Yadroitsava, I., Du Plessis, A. & MacDonald, E. (eds.). Elsevier, p. 491-527 37 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Powder metallurgical processing of Ni-Ti shape memory alloy
Green, S. M., Grant, D. M. & Kelly, N. R., 1997, In: Powder Metallurgy. 40, 1, p. 43-47 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Powder removal from Ti-6Al-4V cellular structures fabricated via electron beam melting
Hasib, H., Harrysson, O. L. A. & West, H. A., 03/2015, In: JOM Journal of the Minerals, Metals and Materials Society. 67, 3, p. 639-646 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Practical Development of a ZnBr2 Flow Battery with a Fluidized Bed Anode Zinc-Electrode
Adelusi, I. A., Amaechi, C. V., Andrieux, F. & Dawson, R., 11/12/2019, In: Journal of The Electrochemical Society. 167, 5, 19 p., 050504.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Predicting limit draft force for a chisel tine using FEA based simulation
Celik, K., Rennie, A. & Akinci, I., 09/2013, 5th International Conference Trends in Agricultural Engineering (TAE 2013). p. 112-117 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Prediction of failure envelopes and stress strain curves of fiber composite laminates under triaxial loads: comparison with experimental results
Zhang, D., Xu, L. & Ye, J., 03/2013, In: Journal of Composite Materials. 47, 6-7, p. 763-776 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Prediction of failure envelopes and stress–strain curves of fiber composite laminates under triaxial loads
Ye, J. & Zhang, D., 09/2012, In: Journal of Composite Materials. 46, 19-20, p. 2417-2430 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Prediction of thermal cracking in concrete structures reinforced with GFRP
EL-Zaroug, O., Forth, J. & Ye, J., 06/2013, FRPRCS-11: 11th International Symposiumn on Fibre Reinforced Polymer for Reinforced Concrete Structures . Barros, J. (ed.). Elsevier
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
Predictions of macroscopic mechanical properties and microscopic cracks of unidirectional fibre-reinforced polymer composites using deep neural network (DNN)
Ding, X., Hou, X., Xia, M., Ismail, Y. & Ye, J., 15/12/2022, In: Composite Structures. 302, 13 p., 116248.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pre-heating of components in cemented total hip arthroplasty
Jafri, A. A., Green, S. M., Partington, P. F., McCaskie, A. W. & Muller, S. D., 11/2004, In: Journal of Bone and Joint Surgery, British Volume. 86B, 8, p. 1214-1219 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pressure determination approach in specific pressure region and FEM based stress analysis of the housing of an external gear pump
Cinar, R., Ucar, M., Celik, K., Firat, M. Z. & Rennie, A., 04/2016, In: Experimental Techniques. 40, 2, p. 489-499 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pressure drop and velocity simulations in non-stochastic lattice structure for filter applications fabricated using additive manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Pressure Drop and Velocity Simulations in Non-Stochastic Structures - Filters Fabricated by Additive Manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 04/2016, In: Filtration. 16, 2, p. 97-102 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pressure-assisted infiltration of molten metals into non-rigid, porous carbon fibre structures
Constantin, H., Harper, L. & Kennedy, A. R., 1/05/2018, In: Journal of Materials Processing Technology. 255, p. 66-75 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference
Rennie, A. E. W. (Editor) & Bibb, R. (Editor), 2016, Lancaster: Lancaster University. 165 p.
Research output: Book/Report/Proceedings › Proceedings
Published
Process characteristics and effects of gas- and water-atomized stainless steel powders in laser-based rapid tooling
Pinkerton, A. J. & Li, L., 08/2003, In: Journal of Laser Applications. 15, 3, p. 172-178 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Process characteristics of single mode fibre laser net shape welding
Eghlio, R. M., Pinkerton, A. J., Sezer, H. K. & Li, L., 2010, Proceedings of the 4th Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Process design of continuous biodiesel production by reactive distillation: comparison between homogeneous and heterogeneous catalysts
Boon-anuwat, N.-N., Kiatkittipong , W., Aiouache, F. & Assabumrungrat, S., 06/2015, In: Chemical Engineering and Processing: Process Intensification. 92 , p. 33-44 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Product Optimization by Rapid Manufacturing and Targeted Functional Analysis
Lupeanu, M., Rennie, A., Neagu, C. & Celik, K., 2011, 16th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 14 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Product re-design using advanced engineering applications and function analysis: a case study for greenhouse clips
Celik, K., Lupeanu, M., Rennie, A., Neagu, C. & Akinci, I., 10/2013, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 35, 3, p. 305-318 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
Production of fluid dynamically improved filters using additive manufacturing
Vijayakumar, B., Rennie, A. & Burns, N., 18/12/2012, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Progressive Collapse Evaluation of High Rise Steel Structures due to Sudden Loss of Structural Members
Stephen, D., Ye, J. & Lam, D., 2012, Advances in steel concrete composite and hybrid structures : proceedings of the 10th International Conference on Steel Concrete Composite and Hybrid Structures, 2-4 July 2012, Singapore. Liew, J. Y. R. & Lee, S. C. (eds.). Singapore: Research Publishing Services
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Properties degradation induced by transverse cracks in general symmetric laminates
Zhang, D., Ye, J. & Lam, D., 15/08/2007, In: International Journal of Solids and Structures. 44, 17, p. 5499-5517 19 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Proportional-integral-plus control of robotic excavator arm utilising state-dependent parameter model
Gu, J., Feng, Z.-H., Ma, X. & Ni, J.-F., 2011, In: Applied Mechanics and Materials. 48-49, p. 1323-1327 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pultruded GFRP continuus beams - comparison of flexural test data with analysis predictions
Turvey, G., 6/09/2011, p. 470-481.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Quadratic representation of a nonlinear dynamic stiffness matrix and related eigenvalue problems
Ye, J. Q. & Williams, F. W., 15/07/1997, In: Computer Methods in Applied Mechanics and Engineering. 146, 3-4, p. 313-323 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Quantifying the effects of gap on the molten pool and porosity formation in laser butt welding
Guo, L., Wang, H., Liu, H., Huang, Y., Wei, Q., Leung, C. L. A., Wu, Y. & Wang, H., 1/08/2023, In: International Journal of Heat and Mass Transfer. 209, 124143.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Radially and azimuthally polarized laser induced shape transformation of embedded metallic nanoparticles in glass
Tyrk, M. A., Zolotovskaya, S. A., Gillespie, W. A. & Abdolvand, A., 27/08/2015, In: Optics Express. 23, 18, p. 23394-23400 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid additive manufacturing of functionally graded structures using simultaneous wire and powder laser deposition
Li, L., Syed, W. U. H. & Pinkerton, A. J., 2006, In: Virtual and Physical Prototyping. 1, 4, p. 217-225 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid and virtual prototyping and applications: Proceedings of the Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports
Bocking, C. E. (Editor), Rennie, A. (Editor) & Jacobson, D. M. (Editor), 2003, Professional Engineering Publishing. 330 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacture: Proceedings of the Fifth National Conference on
Jacobson, D. M. (Editor), Rennie, A. (Editor) & Bocking, C. E. (Editor), 2004, Professional Engineering Publishing. 111 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacture: Proceedings of the Sixth National Conference on
Rennie, A. (Editor), Jacobson, D. M. (Editor) & Bocking, C. E. (Editor), 2005, X-CD Technologies Inc. 129 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacture: Proceedings of the Eighth National Conference on
Jacobson, D. M. (Editor), Bocking, C. E. (Editor) & Rennie, A. (Editor), 2007, MJA Print. 140 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacture: proceedings of the seventh national conference on
Bocking, C. E. (Editor), Rennie, A. E. W. (Editor) & Jacobson, D. M. J. (Editor), 2006, MJA Print. 134 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacturing: Proceedings of the Ninth National Conference on
Rennie, A. (Editor), Jacobson, D. M. (Editor) & Bocking, C. E. (Editor), 2008, MJA Print. 173 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacturing
Rennie, A., Aitchison, D. (Editor) & Jacobson, D. M., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 181-181 1 p.
Research output: Contribution to Journal/Magazine › Editorial
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Tenth National Conference on
Rennie, A. (Editor), Bocking, C. E. (Editor) & Jacobson, D. M. (Editor), 2009, MJA Print. 123 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Eleventh National Conference on
Jacobson, D. M. (Editor), Rennie, A. (Editor) & Bocking, C. E. (Editor), 2010, CRDM Ltd. 222 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on
Rennie, A. (Editor) & Bocking, C. E. (Editor), 06/2011, CRDM Ltd. 203 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Thirteenth Conference on
Bocking, C. E. (Editor) & Rennie, A. (Editor), 06/2012, High Wycombe: CRDM Ltd. 109 p.
Research output: Book/Report/Proceedings › Proceedings
Published
Rapid manufacturing complex geometries for high-power microwave applications
Seviour, R., Rennie, A. & Celik, H. K., 12/2009.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Unpublished
Rapid Manufacturing Design Scenarios
Smith, P. & Rennie, A., 12/2007, (Unpublished). 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Unpublished
Rapid Manufacturing Design Tools
Smith, P. & Rennie, A., 12/2008, (Unpublished). 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Rapid production of microwave packaging in Silicon Aluminium by thin-shell electroforming
Bocking, C., Jacobson, D. M. & Rennie, A. E. W., 01/2002, In: Microelectronics International. 19, 1, p. 30-32 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming
Bocking, C., Jacobson, D. M. & Rennie, A., 06/2001, 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of: iMAPS Strasbourg 2001, "The Millenium Conference". p. 412-415 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Rapid prototyping and flow simulation applications in design of agricultural irrigation equipment: Case study for a sample in-line drip emitter: The paper is to study CFD and RP application samples on the design issues associated with agricultural irrigation equipment
Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 03/2011, In: Virtual and Physical Prototyping. 6, 1, p. 47-56 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter
Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 181-191 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Rapid prototyping using direct laser deposition - the effect of powder atomization type and flowrate
Pinkerton, A. J. & Li, L., 2003, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 217, 6, p. 741-752 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid prototyping using electrodeposition of copper
Dover, S. J., Rennie, A. & Bennett, G. R., 08/1996, Solid Freeform Fabrication Symposium 1996. University of Texas at Austin, p. 191-198 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Rapid Prototyping, Tooling and Manufacturing: Proc. Third National Conference on
Rennie, A. E. W. (Editor), Jacobson, D. M. (Editor) & Bocking, C. (Editor), 2002, Professional Engineering Publishing. 173 p.
Research output: Book/Report/Proceedings › Book
Published
Rate acceleration of 2-methyl-1-butanol dehydration in a reactive distillation column
Aiouache, F. & Goto, S., 05/2002, In: Journal of Chemical Engineering of Japan. 35, 5, p. 443-449 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Reactive distillation for synthesis of glycerol carbonate via glycerolysis of urea
Lertlukkanasuk, N., Kiatkittipong , W., Arpornwichanop, A., Aiouache, F. & Assabumrungrat, S., 08/2013, In: Chemical Engineering and Processing: Process Intensification. 70, p. 103–109 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Reactive distillation-pervaporation hybrid column for tert-amyl alcohol etherification with ethanol
Aiouache, F. & Goto, S., 06/2003, In: Chemical Engineering Science. 58, 12, p. 2465-2477 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Realistic Modeling of High Rise Structures subjected to Progressive Collapse
Stephen, D., Ye, J. & Lam, D., 2011, The Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, Crete, Greece..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Real-time digital simulator (RTDS) and it applications
Liang, Z., Ma, X., Wang, L., Kuffel, R. & Jiang, X., 10/1997, In: Dianli Xitong Zidonghue/Automation of Electric Power Systems. 21, 10, p. 61-64 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Recent developments in testing, design analysis and modelling of bolted connections in pultruded GRP frames made of open-section profiles.
Turvey, G. J., 1998, Proceedings of the 4th EPTA world pultrusion conference. European Pultrusion Technology Association, p. 14
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Recent progress of laser processing technology in micro-LED display manufacturing: A review
Song, L., Yong, X., Zhang, P., Song, S., Chen, K., Yan, H., Sun, T., Lu, Q., Shi, H., Chen, Y. & Huang, Y., 28/02/2025, In: Optics and Laser Technology. 181, 111710.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Recent research advances at Lancaster University on double-lap bolted tension joints in pultruded GRP plate material.
Turvey, G. J. & Wang, P., 2004, Proceedings of the 7th world pultrusion conference. 7 ed. p. 1-16 16 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Recycling of Renewable Composite Materials in the Offshore Industry
Amaechi, C. V., Agbomerie , C. O., Sotayo, A., Wang, F., Hou, X. & Ye, J., 1/09/2019, Reference Module in Materials Science and Materials Engineering. Elsevier
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary
Unpublished
Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM
Lupeanu, M., Rennie, A. & Neagu, C., 31/03/2014, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM
Lupeanu, M., Rennie, A., Eggbeer, D. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 173-181 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models
Bocking, C. E., Rennie, A. & Bennett, G. R., 08/2000, 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin, p. 469-477 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Reliability-based design assessment of offshore inflatable barrier structures made of fibre-reinforced composites
Aboshio, A., Uche, A. O., Akagwu, P. & Ye, J., 1/08/2021, In: Ocean Engineering. 233, 10 p., 109016.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Removal Cu(II) and Ni(II) by natural and synthetic hydroxyapatites: a comparative study
Frnane, F., Boudia, S. & Aiouache, F., 2014, In: Desalination and Water Treatment. 52, 13-15, p. 2856-2862 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Repeated impact performance of stainless steel-lightweight high ductility cement composite beams
Huang, Z., Zhao, X., Zhang, W. & Ye, J., 31/07/2023, In: Thin-Walled Structures. 188, 14 p., 110791.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Replication and fabrication of crafted and natural artifacts by reverse engineering using single camera photogrammetry
Kaufman, J., 2018, Lancaster University. 486 p.
Research output: Thesis › Doctoral Thesis
Published
Repurposing of metal support structures to form powder for use in additive manufacturing
Powell, D., Rennie, A., Molyneux, A., Burns, N. & Geekie, L., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Requirements for large-scale adoption of rapid manufacturing technologies
Hasan, S., Rennie, A., Hoque, M. R. & Ahmed, N., 24/05/2019, In: Cogent Business & Management. 6, 1, 22 p., 1623151.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Research on deploying technical functional analysis for additive manufacturing of a surgical device for intravitreal interventions
Lupeanu, M., Brooks, H., Rennie, A. & Hill, D., 2013, In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 75, 1, p. 141-160 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Research strategy on developing additive manufactured bespoke ophthalmic instruments assisted by an online integrated platform
Lupeanu, M., Rennie, A., Rosu, M.-M. & Moagar-Poladian, G., 04/2014, In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 76, 2, p. 143-162 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Residual stresses in laser direct metal deposited Waspaloy
Moat, R. J., Pinkerton, A. J., Li, L., Withers, P. J. & Preuss, M., 15/03/2011, In: Materials Science and Engineering: A. 528, 6, p. 2288-2298 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Restrained creep of CMW2000 Bone Cement
Green, S., Liu, C., Watkins, N. D., McCaskie, A. W. & Gregg, P. J., 2002, p. T84. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Reverse engineering approach for precise measurement of the physical attributes related to the geometric features of agricultural products
Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of Food Measurement and Characterization. 11, 1, p. 75-84 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art
Kaufman, J., Rennie, A. & Clement, M., 06/2014, Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis (ESDA 2014): Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications. American Society of Mechanical Engineers (ASME), 8 p. ESDA2014-20304
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art
Kaufman, J., Rennie, A. & Clement, M., 1/03/2015, In: Journal of Computing and Information Science in Engineering. 15, 1, 7 p., 011006.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Review of Composite Marine Risers for Deep-Water Applications: Design, Development and Mechanics
Amaechi, C. V., Chesterton, C., Butler, H. O., Gillet, N., Wang, C., Ja’e, I. A., Reda, A. & Odijie, A. C., 17/03/2022, In: Journal of Composites Science. 6, 3, 50 p., e96.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
Review of tests on bolted joints between pultruded GRP profiles.
Turvey, G. J. & Cooper, C., 2004, In: Proceedings of the Institute of Civil Engineers Civil Engineering. 157, 3, p. 211-233 23 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges
Hasanov, S., Alkunte, S., Rajeshirke, M., Gupta, A., Huseynov, O., Fidan, I., Alifui-Segbaya, F. & Rennie, A., 27/12/2021, In: Journal of Manufacturing and Materials Processing. 6, 1, 32 p., 4.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Review on Fixed and Floating Offshore Structures. Part I: Types of Platforms with Some Applications
Amaechi, C. V., Reda, A., Butler, H. O., Ja'e, I. A. & An, C., 5/08/2022, In: Journal of Marine Science and Engineering (JMSE). 10, 8, 56 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Review on Fixed and Floating Offshore Structures. Part II: Sustainable Design Approaches and Project Management
Amaechi, C. V., Reda, A., Butler, H. O., Ja’e, I. A. & An, C., 15/07/2022, In: Journal of Marine Science and Engineering (JMSE). 10, 7, p. e973 973.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
Review on Subsea Pipeline Integrity Management: An Operator’s Perspective
Amaechi, C. V., Hosie, G., Reda, A. & Correia, J. A. (Editor), 21/12/2022, In: Energies. 16, 1, 98.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
Review on the design and mechanics of bonded marine hoses for Catenary Anchor Leg Mooring (CALM) buoys
Amaechi, C. V., Chesterton, C., Butler, H. O., Wang, F. & Ye, J., 15/12/2021, In: Ocean Engineering. 242, 32 p., 110062.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Robust Reinforcement Learning Based Visual Servoing with Convolutional Features
Fei, H., Wang, Z. & Kennedy, A., 31/12/2023, In: IFAC-PapersOnLine. 56, 2, p. 9781-9786 6 p.
Research output: Contribution to Journal/Magazine › Conference article › peer-review
Published
Scientific Review and Annotated Bibliography of Teaching in Higher Education Academies on Online Learning: Adapting to the COVID-19 Pandemic
Amaechi, C. V., Amaechi, E. C., Oyetunji, A. K. & Kgosiemang, I. M., 22/09/2022, In: Sustainability. 14, 19, 25 p., 12006.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Scientometric Review and Thematic Areas for the Research Trends on Marine Hoses
Amaechi, C. V., Ja'e, I. A., Reda, A. & Ju, X., 19/10/2022, In: Energies. 15, 20, 31 p., 7723.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Scientometric Review for Research Patterns on Additive Manufacturing of Lattice Structures
Amaechi, C. V., Adefuye, E. F., Kgosiemang, I. M., Huang, B. & Amaechi, E. C., 2/08/2022, In: Materials. 15, 15, 34 p., e5323.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Screening wall effects of a thin fluidized bed by near-infrared imaging
Aiouache, F., tSaoir, M. N. A. & Kitagawa, K., 15/02/2011, In: Chemical Engineering Journal. 167, 1, p. 288-296 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Second-harmonic conical refraction: observation of free and forced harmonic waves
Zolotovskaya, S., Abdolvand, A., Kalkandjiev, T. K. & Rafailov, E. U., 04/2011, In: Applied Physics B. 103, 1, p. 9-12 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Selective Laser Melting for improving quality characteristics of a prism shaped topology injection mould tool insert for the automotive industry
El Kashouty, M., Rennie, A., Ghazy, M. & El Aziz, A. A., 1/12/2021, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 235, 23, 12 p., 989382.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...4 5 6 7 8 9 10 11 Next

Research

Manufacturing

Quick Links

Connect With Us