Manufacturing

View graph of relations

301 - 400 out of 1,001Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Author last name

Published
Proportional-integral-plus control of robotic excavator arm utilising state-dependent parameter model
Gu, J., Feng, Z.-H., Ma, X. & Ni, J.-F., 2011, In: Applied Mechanics and Materials. 48-49, p. 1323-1327 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Design and analysis method of nonlinear helical springs using a combining technique: Finite element analysis, constrained Latin hypercube sampling and genetic programming
Gu, Z., Hou, X. & Ye, J., 1/11/2021, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 235, 22, p. 5917-5930 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A parametric study of adhesive bonded joints with composite material using black-box and grey-box machine learning methods: Deep neuron networks and genetic programming
Gu, Z., Liu, Y., J.Hughes, D., Ye, J. & Hou, X., 15/07/2021, In: Composites Part B: Engineering. 217, 11 p., 108894.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Advanced static and dynamic analysis method for helical springs of non-linear geometries
Gu, Z., Hou, X. & Ye, J., 24/11/2021, In: Journal of Sound and Vibration. 513, 18 p., 116414.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Novel Self‐Updating Design Method for Complex 3D Structures Using Combined Convolutional Neuron and Deep Convolutional Generative Adversarial Networks
Gu, Z., Hou, X., Saafi, M. & Ye, J., 30/06/2022, In: Advanced Intelligent Systems. 4, 6, 10 p., 2100186.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A genetic evolved machine learning approach for 3D DEM modelling of anisotropic materials with full consideration of particulate interactions
Gu, Z., Ding, X., Hou, X. & Ye, J., 1/02/2023, In: Composites Part B: Engineering. 250, 11 p., 110432.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
How to fix a tibial tubercle osteotomy with distalisation: A finite element analysis
Guneri, B., Kose, O., Celik, H. K., Cakar, A., Tasatan, E. & Rennie, A., 31/08/2022, In: Knee. 37, p. 132-142 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Understanding keyhole induced-porosities in laser powder bed fusion of aluminum and elimination strategy
Guo, L., Wang, H., Liu, H., Huang, Y., Wei, Q., Leung, C. L. A., Wu, Y. & Wang, H., 31/01/2023, In: International Journal of Machine Tools and Manufacture. 184, 103977.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Quantifying the effects of gap on the molten pool and porosity formation in laser butt welding
Guo, L., Wang, H., Liu, H., Huang, Y., Wei, Q., Leung, C. L. A., Wu, Y. & Wang, H., 1/08/2023, In: International Journal of Heat and Mass Transfer. 209, 124143.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Copper and copper selenide nanoparticles in the sol-gel matrices: structural and optical
Gurin, V. S., Alexeenko, A. A., Zolotovskaya, S. & Yumashev, K. V., 07/2006, In: Materials Science and Engineering: C . 26, 5-7, p. 952-955 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Structure and optical properties of CuxO- and CuxSe-doped sol–gel silica glasses
Gurin, V. S., Alexeenko, A. A., Yumashev, K. V., Prokoshin, P. V., Zolotovskaya, S. & Zhavnerko, G. A., 15/12/2003, In: Materials Science and Engineering: C . 23, 6-8, p. 1063-1067 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of build orientation on FDM parts: a case study for validation of deformation behaviour by FEA
Hambali, R. H., Celik, K., Smith, P., Rennie, A. & Ucar, M., 09/2010, International Conference on Design and Concurrent Engineering (iDECON 2010): Manufacturing Challenges Towards Global Sustainability. Penerbit Universiti (UTeM), p. 224-228 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Analysis of existing Additive manufacturing material selectors
Hambali, R. H. & Rennie, A., 06/2010. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Optimisation of Build Orientation for FDM Additive Manufactured Products
Hambali, R. H., Vaudelin, M. & Rennie, A., 02/2012, International Conference on Applications and Design in Mechanical Engineering (ICADME 2012): Proceedings of the . Perlis, Malaysia: School of Mechatronic Engineering, UniMAP, 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Physical Analysis of Maximum Strength of Additive Manufactured Parts: A Case-Based Study
Hambali, R. H., Rennie, A. & McGovern, J., 03/2012, 2nd International Conference on Arts, Social Sciences & Technology: Proceedings of the . Penang, Malaysia, 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Determination of the effect of part orientation to the strength value on additive manufacturing FDM for end-use parts by physical testing and validation via three-dimensional finite element analysis
Hambali, R. H., Smith, P. & Rennie, A., 2012, In: International Journal of Materials Engineering Innovation. 3, 3-4, p. 269-281 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Optimisation of build orientation for FDM additive manufactured products
Hambali, R. H., Vaudelin, M. & Rennie, A., 06/2011.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Analysis the Awkward Posture Ergonomic Risk and Workstation Improvement Simulation in Mechanical Assembly Manufacturing Industry using DelmiaV5
Hambali, R. H., Rahim, S. A. A., Azizan, N., Zali, Z., Akmal, S. & Zin, M. H., 31/12/2019, In: IOP Conference Series: Materials Science and Engineering. 705, 1, 6 p.
Research output: Contribution to Journal/Magazine › Conference article › peer-review
Published
The application of rapid manufacturing technologies in the spare parts industry
Hasan, S. & Rennie, A., 08/2008, Sild Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 584-590 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Virtual Trading System for Rapid Manufactured Products
Hasan, S. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 127-135 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
A Comprehensive Business Model for Rapid Manufactured Products
Hasan, S. & Rennie, A., 10/2008, 19th International Symposium of the Danube-Adria-Association-for-Automation-and-Manufacturing - Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions. Vienna: DAAAM International, p. 591-592 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The business model for the functional rapid manufacturing supply chain
Hasan, S., Rennie, A. & Hasan, J., 01/2014, In: Studia Commercialia Bratislavensia. 6, 24, p. 536-552 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Novel engineered high performance sugar beetroot 2D nanoplatelet-cementitious composites
Hasan, H., Huang, B., Saafi, M. B. S., Sun, J., Chi, Y., Eric Whale, Hepworth, D. & Ye, J., 30/03/2019, In: Construction and Building Materials. 202, p. 546-562 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Requirements for large-scale adoption of rapid manufacturing technologies
Hasan, S., Rennie, A., Hoque, M. R. & Ahmed, N., 24/05/2019, In: Cogent Business & Management. 6, 1, 22 p., 1623151.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Engineered novel multifunctional hybrid nanofiber reinforcement for improving the flexural strength and fracture of cementitious composites for sustainable concrete
Hasan, H., 2019, Lancaster University. 286 p.
Research output: Thesis › Doctoral Thesis
Published
Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges
Hasanov, S., Alkunte, S., Rajeshirke, M., Gupta, A., Huseynov, O., Fidan, I., Alifui-Segbaya, F. & Rennie, A., 27/12/2021, In: Journal of Manufacturing and Materials Processing. 6, 1, 32 p., 4.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing
Hasib, H., Rennie, A., Burns, N. & Geekie, L., 11/2014, The Filtration Society 50th Anniversary International Conference and Exhibition: Proceedings of the . The Filtration Society, 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Design and fabrication of cranioplasty prostheses: fit evaluation between phantom-based haptic environment and Materialise 3-Matic Software
Hasib, H., Yahaya, S. H., Mohamad, A. K., Bani Hashim, A. Y., Ali Mokhtar, N. & Simha, S. S., 2013, In: Journal of Advanced Manufacturing Technology. 7, 1, p. 87-96 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental evaluation of mechanical properties of tin composite (tin, rice husk and silicon carbide) for sustainable production tooling
Hasib, H., Taufik, R. S., Mohd, N. F. A., Yahaya, S. H., Mohamad, A. K., Abdullah, Z., Ariff, H. & Hambali, R. H., 2014, In: Journal of Advanced Manufacturing Technology. 8, 2
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing
Hasib, H., Rennie, A., Burns, N. & Geekie, L., 12/2014, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Powder removal from Ti-6Al-4V cellular structures fabricated via electron beam melting
Hasib, H., Harrysson, O. L. A. & West, H. A., 03/2015, In: JOM Journal of the Minerals, Metals and Materials Society. 67, 3, p. 639-646 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing
Hasib, H., Rennie, A., Burns, N. & Geekie, L., 2015, In: Filtration. 15, 3, p. 174-180 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pressure drop and velocity simulations in non-stochastic lattice structure for filter applications fabricated using additive manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Simulation of flow characteristics for filters designed with a non-stochastic lattice structure fabricated via additive manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015, p. 153-158. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Pressure Drop and Velocity Simulations in Non-Stochastic Structures - Filters Fabricated by Additive Manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 04/2016, In: Filtration. 16, 2, p. 97-102 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Porous calcium phosphate glass microspheres for orthobiologic applications
Hossain, K. M. Z., Patel, U., Kennedy, A., Macri-Pellizzeri, L., Sottile, V., Grant, D. M., Scammell, B. E. & Ahmed, I., 05/2018, In: Acta Biomaterialia. 72, p. 396-406 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Metamaterials with negative Poisson’s ratio: a review of mechanical propterties and deformation mechanisms
Hou, X. & Silberschmidt, V., 10/04/2015, Mechanics of Advanced Materials: Analysis of Properties and Performance. Silberschmidt, V. V. & Matveenko, V. P. (eds.). Springer International Publishing, p. 155-179 25 p. (Engineering Materials).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A novel 3D composite structure with tunable Poisson's ratio and stiffness
Hou, X. & Hu, H., 07/2015, In: physica status solidi (b). 252, 7, p. 1565–1574 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tailoring structure of inclusion with strain-induced closure to reduce Poisson's ratio of composite materials
Hou, X., Hu, H. & Silberschmidt, V., 2014, In: Journal of Applied Physics. 115, 8 p., 224903.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Numerical analysis of composite structure with in-plane isotropic negative Poisson’s ratio: effects of materials properties and geometry features of inclusions
Hou, X., Hu, H. & Silberschmidt, V., 03/2014, In: Composites Part B: Engineering. 58, p. 152–159 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Erratum to: A composite material with Poisson’s ratio tunable from positive to negative values: an experimental and numerical study
Hou, X., Hu, H. & Silberschmidt, V., 01/2014, In: Journal of Materials Science. 49, 1, p. 461 1 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A novel concept to develop composite structures with isotropic negative Poisson's ratio: effects of random inclusions
Hou, X., Hu, H. & Silberschmidt, V., 12/10/2012, In: Composites Science and Technology. 72, 15, p. 1848–1854 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A study of computational mechanics of 3D spacer fabric: factors affecting its compression deformation
Hou, X., Hu, H. & Silberschmidt, V., 05/2012, In: Journal of Materials Science. 47, 9, p. 3989–3999 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Non-uniformity of deformation in low-density thermally point bonded non-woven material: effect of microstructure
Hou, X., Acar, M. & Silberschmidt, V., 01/2011, In: Journal of Materials Science. 46, 2, p. 307–315 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Finite element simulation of low-density thermally bonded nonwoven materials: effects of orientation distribution function and arrangement of bond points
Hou, X., Acar, M. & Silberschmidt, V., 02/2011, In: Computational Materials Science. 50, 4, p. 1292–1298 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Nonlinear compression behavior of warp-knitted spacer fabric: effect of sandwich structure
Hou, X., Hu, H., Liu, Y. & Silberschmidt, V., 2011, In: Computers, Materials & Continua. 23, 2, p. 119-134 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
2D finite element analysis of thermally bonded nonwoven materials: continuous and discontinuous models
Hou, X., Acar, M. & Silberschmidt, V., 09/2009, In: Computational Materials Science. 46, 3, p. 700–707 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tensile behaviour of low density thermally bonded nonwoven material
Hou, X., Acar, M. & Silberschmidt, V., 2009, In: Journal of Engineered Fibres and Fabrics . 4, 1, p. 26-33 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A GPGPU accelerated compressed sensing with tight wavelet frame transform technique for MR imaging reconstruction
Hu, B., Ma, X., Joyce, M., Glover, P. & Naleem, B., 2012, Imaging Systems and Techniques (IST), 2012 IEEE International Conference on. IEEE, p. 121-125 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Dynamic compressive behavior of a novel ultra-lightweight cement composite incorporated with rubber powder
Huang, Z., Sui, L., Wang, F., Du, S., Zhou, Y. & Ye, J., 15/07/2020, In: Composite Structures. 244, 14 p., 112300.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of rubber particles and fibers on the dynamic compressive behavior of novel ultra-lightweight cement composites: Numerical simulations and metamodeling
Huang, Z., Deng, W., Du, S., Gu, Z., Long, W. & Ye, J., 15/02/2021, In: Composite Structures. 258, 20 p., 113210.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Axial-Load Resistance of a Novel UHPFRC Grouted SHS Tube-Sleeve Connection: Experimental, Numerical, and Theoretical Approaches
Huang, Z., Zhang, W., Fan, S., Sui, L. & Ye, J., 30/11/2021, In: Journal of Structural Engineering. 147, 11
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Ultra-lightweight high ductility cement composite incorporated with low PE fiber and rubber powder
Huang, Z., Liang, T., Huang, B., Zhou, Y. & Ye, J., 20/12/2021, In: Construction and Building Materials. 312, 12 p., 125430.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Adaptive stochastic morphology simulation and mesh generation of high-quality 3D particulate composite microstructures with complex surface texture
Huang, J., Deng, F., Liu, L. & Ye, J., 1/04/2022, In: Computer Methods in Applied Mechanics and Engineering. 393, 45 p., 114811.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multi-impact performance of prestressed CFRP-strengthened RC beams using H-typed end anchors
Huang, Z., Deng, W., Li, R., Chen, J., Sui, L., Zhou, Y., Zhao, D., Yang, L. & Ye, J., 30/09/2022, In: Marine Structures. 85, 30 p., 103264.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Hybrid cement composite-based sensor for in-situ chloride monitoring in concrete structures
Huang, B., Wang, J., Piukovics, G., Zabihi, N., Ye, J., Saafi, M. & Ye, J., 15/06/2023, In: Sensors and Actuators B: Chemical. 385, 10 p., 133638.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Repeated impact performance of stainless steel-lightweight high ductility cement composite beams
Huang, Z., Zhao, X., Zhang, W. & Ye, J., 31/07/2023, In: Thin-Walled Structures. 188, 14 p., 110791.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Dynamic splitting behavior of ultra-lightweight cement composite with rubber and polyethylene fiber
Huang, Z., Pan, W., Du, S., Zhou, Y. & Ye, J., 5/10/2023, In: Construction and Building Materials. 399, 132577.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Irregular Shape Effect of Brass and Copper Filler on the Properties of Metal Epoxy Composite (MEC) for Rapid Tooling Application
Hussin, R., Sharif, S., Rahim, S. Z. B. A., Rennie, A., Suhaimi, M. A., Abdellah, A. E.-H., Shuaib, N. A., Khushairi, M. T. M. & Titu, A. M., 2/11/2022, In: Journal of Manufacturing and Materials Processing. 6, 6, 22 p., 134.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Potential of Rapid Tooling in Rapid Heat Cycle Molding: A Review
Huzaim, N. H. M., Rahim, S., Musa, L., Abdellah, A. E.-H., Abdullah, M. M. A. B., Rennie, A., Rahman, R., Garus, S., Błoch, K., Sandu, A. V., Vizureanu, P. & Nabiałek, M., 23/05/2022, In: Materials. 15, 10, 39 p., 3725.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Numerical investigation of powder heating in coaxial laser metal deposition
Ibarra-Medina, J. & Pinkerton, A. J., 11/2011, In: Surface Engineering. 27, 10, p. 754-761 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A CFD model of the laser, coaxial powder stream and substrate interaction in laser cladding
Ibarra-Medina, J. & Pinkerton, A. J., 2010, In: Physics Procedia. 5, B, p. 337-346 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The influence of powder stream shape and substrate position on mass addition in laser cladding
Ibarra-Medina, J. & Pinkerton, A. J., 2010, Proceedings of the 24th International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Coaxial laser cladding gas flows and their effects
Ibarra-Medina, J., Pinkerton, A. J. & Paul, C. P., 2009, Proceedings of the 23rd International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A CFD model of laser cladding: From deposition head to melt pool dynamics
Ibarra-Medina, J., Vogel, M. & Pinkerton, A. J., 2011, Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 378-386 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A numerical investigation of powder heating in coaxial laser direct metal deposition
Ibarra-Medina, J. & Pinkerton, A. J., 2010, Proceedings of the 36th International Matador Conference. Hinduja, S. & Li, L. (eds.). London: Springer, p. 455-458 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Discrete element method for generating random fibre distributions in micromechanical models of fibre reinforced composite laminates
Ismail, Y., Yang, D. & Ye, J., 1/04/2016, In: Composites Part B: Engineering. 90, p. 485-492 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A DEM model for visualising damage evolution and predicting failure envelope of composite laminae under biaxial loads
Ismail, Y., Yang, D. & Ye, J., 1/10/2016, In: Composites Part B: Engineering. 102, p. 9-28 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Discrete element modelling of unidirectional fibre-reinforced polymers under transverse tension
Ismail, Y., Sheng, Y., Yang, D. & Ye, J., 05/2015, In: Composites Part B: Engineering. 73, p. 118-125 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
A DEM for visualising damage evolution and predicting failure of composite lamina under uniaxial and biaxial loads
Ismail, Y., 2017, (Unpublished) Lancaster University. 177 p.
Research output: Thesis › Doctoral Thesis
Published
An ABAQUS® plug-in for generating virtual data required for inverse analysis of unidirectional composites using artificial neural networks
Ismail, Y., Wan, L., Chen, J., Ye, J. & Yang, D., 31/10/2022, In: Engineering with Computers. 38, 5, p. 4323-4335 13 p., 5.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Injection mould tool manufacture in less than five days
Jacobson, D., Bocking, C. & Rennie, A. E. W., 1/06/2002, 9 p. Society of Manufacturing Engineers.
Research output: Other contribution
Published
Rapid design, prototyping and manufacture: Proceedings of the Fifth National Conference on
Jacobson, D. M. (Editor), Rennie, A. (Editor) & Bocking, C. E. (Editor), 2004, Professional Engineering Publishing. 111 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacture: Proceedings of the Eighth National Conference on
Jacobson, D. M. (Editor), Bocking, C. E. (Editor) & Rennie, A. (Editor), 2007, MJA Print. 140 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Eleventh National Conference on
Jacobson, D. M. (Editor), Rennie, A. (Editor) & Bocking, C. E. (Editor), 2010, CRDM Ltd. 222 p.
Research output: Book/Report/Proceedings › Book
Published
Injection Mould Tool Manufacture in Less Than Five Days
Jacobson, D. M., Bocking, C. E. & Rennie, A., 03/2002, RAPRA Rapid Tooling Conference 2002: Conference Proceedings. RAPRA, p. 35-43 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Optimization of mooring line design parameters using Mooring Optimization Tool for FPSO (MooOpT4FPSO) with the consideration of integrated design methodology
Ja'e, I. A., Ahmed Ali, M. O., Yenduri, A., Amaechi, C. V., Nizamani, Z. & Nakayama, A., 15/11/2022, In: Ocean Engineering. 264, 15 p., 112499.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pre-heating of components in cemented total hip arthroplasty
Jafri, A. A., Green, S. M., Partington, P. F., McCaskie, A. W. & Muller, S. D., 11/2004, In: Journal of Bone and Joint Surgery, British Volume. 86B, 8, p. 1214-1219 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
OPTIMAL PROSTHESIS TEMPERATURE IN CEMENTED TOTAL HIP ARTHROPLASTY
Jafri, A., Green, S. M., McCaskie, A. W., Partington, P. F. & Muller, S. D., 1/10/2006, In: Journal of Bone and Joint Surgery, British Volume. 88-B, SUPP III, p. 365 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
Experimental studies of elliptical concrete-filled tube columns
Jamaluddin, N., Lam, D. & Ye, J., 2010, TUBULAR STRUCTURES XIII. Young, B. (ed.). BOCA RATON: CRC PRESS-TAYLOR & FRANCIS GROUP, p. 333-340 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Finite Element Analysis of Elliptical Stub CFT Columns
Jamaluddin, N., Lam, D. & Ye, J., 2009, Steel Concrete Composite and Hybrid Structures. Lam, D. (ed.). Singapore: Research Publishing Services, p. 265-270 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An experimental study on elliptical concrete filled columns under axial compression
Jamaluddin, N., Lam, D., Dai, X. & Ye, J., 08/2013, In: Journal of Constructional Steel Research. 87, p. 6-16 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The effect of beam geometry on diode laser forming of sheet metals
Jamil, M. S. C., Pinkerton, A. J., Li, L. & Sheikh, M. A., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 495-502 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
ORTHOPAEDIC BIOPOLYMER WEAR SCREENING RIG VALIDATED AGAINST CLINICAL DATA
Joyce, T. J., Monk, D., Thompson, P., Chiu, P., Unsworth, A. & Green, S. M., 1/10/2006, In: Journal of Bone and Joint Surgery, British Volume. 88-B, SUPP III, p. 377 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
The design & development of a simulator for in vitro testing of metatarsophalangeal prostheses
Joyce, T. J., Green, S. M. & Unsworth, A., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Polymeric biomaterial wear test rig validated to ASTM F732-00 and against clinical data
Joyce, T. J., Monk, D., Thompson, P., Chiu, P., Unsworth, A. & Green, S. M., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Influence of bovine serum lubricant changeover time on the wear of PTFE biomaterial against stainless steel
Joyce, T. J., Mendham, K., Green, S. M. & Unsworth, A., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A new fictitious time for the dynamic relaxation (DXDR) method
Kadkhodayan, A., Alamatian, J. & Turvey, G. J., 7/05/2008, In: International Journal for Numerical Methods in Engineering. 74, 6, p. 996-1018 23 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A DXDR large deflection analysis of uniformly loaded square, circular and elliptical orthotropic plates using non-uniform rectangular finite-differences
Kadkhodayan, M., Alamatian, J., Turvey, G. & Erfani Moghadam, A., 10/2012, In: Journal of Mechanical Science and Technology. 26, 10, p. 3231-3242 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Influence of melt pool convection on residual stress induced in laser cladding and powder deposition
Kamara, A. M., Wang, W., Marimuthu, S., Pinkerton, A. J. & Li, L., 2010, Proceedings of the 4th Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Analysis of failure mechanisms of adhesive joints modified by a novel additive manufacturing-assisted method
Kanani, A. Y., Wang, X. E., Hou, X., Rennie, A. E. W. & Ye, J., 15/02/2023, In: Engineering Structures. 277, 9 p., 115428.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Novel Feature-Based Manufacturability Assessment System for Evaluating Selective Laser Melting and Subtractive Manufacturing Injection Moulding Tool Inserts
Kashouty, M. F. E., Rennie, A. & Ghazy, M., 22/05/2023, In: Designs. 7, 3, 18 p., 68.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effects of lactic and citric acid on early-age engineering properties of Portland/calcium aluminate blended cements
Kastiukas, G., Zhou, X., Castro-Gomes, J., Huang, S. & Saafi, M. B. S., 30/12/2015, In: Construction and Building Materials. 101, 1, p. 389-395 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Polarities of function and form using additive manufacturing - where the middle ground might be in achieving a creative balance for SMEs
Kaufman, J., Rennie, A. & Quayle, S., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 135-143 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Unpublished
Photography and Cloud Computing enabled Replication of Historic Artefacts for fabrication via Additive Manufacturing Technology
Kaufman, J. & Rennie, A., 18/12/2012, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art
Kaufman, J., Rennie, A. & Clement, M., 06/2014, Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis (ESDA 2014): Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications. American Society of Mechanical Engineers (ASME), 8 p. ESDA2014-20304
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art
Kaufman, J., Rennie, A. & Clement, M., 1/03/2015, In: Journal of Computing and Information Science in Engineering. 15, 1, 7 p., 011006.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artefacts
Kaufman, J., Rennie, A. & Clement, M., 03/2015. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Touching history: 3D replica artifacts
Kaufman, J. & Rennie, A., 12/2014, Ancient Egypt, 15, 3, p. 32-33 2 p.
Research output: Contribution to specialist publication › Article
Published
Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artifacts
Kaufman, J., Rennie, A. E. W. & Clement, M., 2015, In: Procedia CIRP. 36, p. 223-229 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 3 4 5 6 7 8 ...11 Next

Research

Manufacturing

Quick Links

Connect With Us