Manufacturing

View graph of relations

201 - 300 out of 1,001Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Author last name

Published
Uplift tests on column base connections in pultruded GRP frames.
Turvey, G. J. & Cooper, C., 1998, In: Proceedings of the eighth international conference on composite materials (ECCM-8). p. 285-292 8 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Elastic large deflection analysis of stiffened annular sector plates.
Turvey, G. J. & Salehi, M., 1998, In: International Journal of Mechanical Sciences. 40, 1, p. 51-70 20 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Effect of load position on the lateral buckling of pultruded GRP cantilevers - correlations between experiment and theory.
Turvey, G. J., 05/1996, In: Composite Structures. 35, 1, p. 33-47 15 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Lateral buckling tests on rectangular cross-section pultruded GRP cantilever beams.
Turvey, G. J., 1996, In: Composites Part B: Engineering. 27, 1, p. 35-42 8 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project
Turvey, G. J., 1996, Structural design of polymer composites: EUROCOMP design code and handbook. Clarke, J. L. (ed.). London: E. and FN Spon, p. 719-741 23 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Lateral buckling tests on pultruded GRP I-section beams with simply supported - simply supported and clamped - simply supported end conditions.
Turvey, G. J. & Brooks, R. J., 1996, Proceedings of the 1st international conference on composites in infrastructure (ICCI '96). University of Arizona, p. 651-664 14 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characterisation of the short term static moment - rotation response of bolted connections between pultruded GRP beam and column WF-sections.
Turvey, G. J. & Cooper, C., 1996, Proceedings of the 2nd international conference on advanced composite materials in bridges and structures (ACMBS II). Montreal: Canadian Society for Civil Engineering, p. 927-934 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid pultruded GRP frame connections: tests to determine static moment-rotation characteristics.
Turvey, G. J. & Cooper, C., 1996, ECCM-7 Seventh European Conference on Composite Materials : realising their commercial potential. Bader, M. (ed.). Cambridge: Woodhead Publishing Limited, p. 295-300 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Full-range response of circular steel plates subjected to combined transverse pressure and edge compression.
Turvey, G. J. & Drinali, H., 1996, Advances in computational techniques for structural engineering. Topping, B. H. V. (ed.). Edinburgh: Civil-Comp Press, 313 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Elastic and initial flexural failure analysis of unsymmetrically laminated cross-ply strips.
Turvey, G. J. & Osman, M. Y., 1996, In: Composites Part B: Engineering. 27, 5, p. 505-518 14 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Analysis of pultruded glass reinforced plastic beams with semi-rigid end connections.
Turvey, G. J., 1997, In: Composite Structures. 38, 1, p. 3-16 14 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Non-linear first yield analysis of circular plates subjected to combined uniform pressure and edge compression.
Turvey, G. J. & Drinali, H., 1997, In: Computers and Structures. 63, 4, p. 769-773 5 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Circular plates with one diametral stiffener: an elastic large deflection analysis.
Turvey, G. J. & Salehi, M., 1997, In: Computers and Structures. 63, 4, p. 775-783 9 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Full-section yield analysis of uniformly loaded sector plates.
Turvey, G. J. & Salehi, M., 1997, Trends in structural mechanics: theory, practice and education. Roorda, J. & Srivastava, N. K. (eds.). v. 54 ed. Dordrecht; London: Kluwer Academic, p. 289-298 10 p. (Solid mechanics and its applications).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project
Turvey, G. J., 1995, EUROCOMP design guide and background projects. Clarke, J. L. (ed.). London: Chapman and Hall
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single bolt tension joint tests on pultruded GRP WF-section web and flange material.
Turvey, G. J. & Cooper, C., 1995, Proceedings of the 10th international conference on composite materials (ICCM-10). Poursartip, A. & Street, K. (eds.). Vancouver: Woodhead Publishing Ltd., p. 621-628 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Large deflection analysis of eccentrically stiffened sector plates.
Turvey, G. J. & Salehi, M., 1995, Proceedings of a conference on developments in computational techniques for civil engineering (CIVIL-COMP 95). Topping, B. H. V. (ed.). Edinburgh: Civil-Comp Press, p. 243-253 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Tension/compression strength of unnotched/notched pultruded GRP plate.
Turvey, G. J., 1992, Proceedings of the ECCM-composites testing and standardisation conference.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Tests on pultruded GRP posts for handrail/barrier structures.
Turvey, G. J. & Slater, R. C., 1992, First international conference on advanced composite materials in bridges and structures. Canada
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Open-hole tension strength of pultruded GRP plate.
Turvey, G. & Wang, P., 1/02/2003, In: Proceedings of the ICE - Structures and Buildings. 156, 1, p. 93-101 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Structural analysis of CFRP-plated pultruded GRP beams.
Turvey, G., 1/04/2006, In: Proceedings of the ICE - Structures and Buildings. 159, SB2, p. 65-75 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tearing failure of web-flange junctions in pultruded GRP profiles.
Turvey, G. J. & Zhang, Y., 1/02/2005, In: Composites Part A: Applied Science and Manufacturing. 36, 2, p. 309-317 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Failure of pultruded GRP single-bolt tension joints under hot-wet conditions.
Turvey, G. & Wang, P., 1/02/2007, In: Composite Structures. 77, 4, p. 514-520 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Failure of pultruded GRP WF-section webs in compression - an experimental investigation.
Turvey, G., 2006, Proceedings of the 12th European conference on composite materials (ECCM-12).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An FE analysis of the stresses in pultruded GRP single-bolt tension joints and their implications for joint design.
Turvey, G. & Wang, P., 2006, Proceedings of the 6th international conference on computational mechanics (ECCM 2006).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single-bolt tension joints in pultruded GRP plate - effects of elevated temperature on failure loads, failure modes, load orientation and joint efficiency.
Turvey, G. & Wang, P., 2006, Proceedings of the 2nd international conference on joining plastics 2006..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests.
Turvey, G. & Zhang, Y., 02/2006, In: Composites Part A: Applied Science and Manufacturing. 37, 2, p. 152-164 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns.
Turvey, G. & Zhang, Y., 09/2006, In: Computers and Structures. 84, 22-23, p. 1527-1537 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Cross-stiffened circular plates: an elasto-plastic large deflection analysis
Turvey, G., 14/09/2010.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effects of bonded splice joints on the flexural response of pultruded fibre reinforced polymer beams
Turvey, G., 7/09/2010. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
An experimental investigation of bolt pull-through in pultruded GRP plate
Turvey, G., 1/09/2009, p. 462-472. 11 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Experimental evaluation of bolt pull-through in pultruded glass-fibre-reinforced polymer plate
Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 307-319 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Failure of pultruded GRP angle leg junctions in tension
Turvey, G. & Wang, P., 27/07/2009. 11 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Environmental effects on the failure of GRP multi-bolt joints
Turvey, G. J. & Wang, P., 08/2009, In: Proceedings of the ICE - Structures and Buildings. 162, 4, p. 275-287 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener
Turvey, G. J. & Salehi, M., 2008, In: Thin-Walled Structures. 46, 7-9, p. 991-1002 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Buckling of CFRP stiffened GRP flanges
Amal Afifi, 22/07/2008. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Bending of tip-loaded CFRP stiffened pultruded GRP cantilevers: comparison between theory and experiment
Turvey, G., 2/06/2008. 10 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effect of hole clearance on bolt loads in pultruded GRP tension joints
Turvey, G. & Wang, P., 8/07/2007. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener
Turvey, G. & Salehi, M., 26/06/2007. 27 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Opening mode failure of pultruded GRP angle leg junctions
Turvey, G. & Zhang, Y., 30/04/2007, p. 389-393. 5 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Pultruded GFRP continuus beams - comparison of flexural test data with analysis predictions
Turvey, G., 6/09/2011, p. 470-481.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Failure of single-lap single-bolt tension joints in pultruded glass fibre reinforced plate
Turvey, G., 13/06/2012. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
An experimental investigation of the tensile behaviour of single-lap bolted joints in pultruded GFRP plate
Turvey, G. & Gode, J., 13/09/2012. 15 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Flexure of pultruded glass-fibre-reinforced polymer beams with bonded splice joints
Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 333-344 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites
Turvey, G., 2011, Composite joints and connections: principles, modelling and testing. Camanho, P. & Tong, L. (eds.). Cambridge: Woodhead Publishing Limited, p. 77-111 35 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Enhancing the load capacity of pultruded GFRP beams via discrete load redistribution
Turvey, G., 04/2015, In: Composite Structures. 122, p. 352-360 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Flexural behavior of pultruded glass fibre reinforced polymer composite beams with bolted splice joints
Turvey, G. & Cerutti, X., 01/2015, In: Composite Structures. 119, 1, p. 543-550 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental and analytical investigation of two- and six-plate bonded splice joints on serviceability limit deformations of pultruded GFRP beams
Turvey, G., 05/2014, In: Composite Structures. 111, p. 426-435 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An experimental investigation of the failure of pultruded GFRP single-lap two-bolt connections in tension’
Turvey, G., 2014, Proceedings of the International Conference, FRP Bridges 2014.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Ultimate loads, strengths, extensions and strains of pultruded GFRP single-lap, single-bolt tension joints
Turvey, G., 2013, Proceedings of the International Conference on Advanced Composites in Construction 2013. p. 357-367 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Testing of pultruded GFRP materials and structures for civil engineering
Turvey, G., 2013, Advanced Composites in Civil Engineering. 1st ed. Woodhead Publishing Limited, p. 440-508 69 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
Single- and double-lap bolted joints in pultruded composite plate
Turvey, G., 2014.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effects of splice joint geometry and bolt torque of the serviceability response of pultruded glass fibre reinforced polymer composite beams
Turvey, G. & Cerutti, X., 1/11/2015, In: Composite Structures. 131, p. 490-500 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Testing and analysis of pultruded GFRP continuous beams for the deflection serviceability limit state
Turvey, G. J., 1/05/2016, In: Composite Structures. 141, p. 213-220 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental investigation of the load–deformation behaviour of pultruded GFRP modular and custom safety barriers
Turvey, G. J., 1/12/2015, In: Composite Structures. 133, p. 659-669 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Bending of unequal span continuous pultruded glass fibre reinforced polymer (GFRP) beams
Turvey, G. J., 2015, Advanced Composites in Construction, ACIC 2015 - Proceedings of the 7th Biennial Conference on Advanced Composites In Construction. p. 227-232 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Effects of Lap Thickness and Joint Geometry on Failure of Pultruded Composite Single-Lap Bolted Tension Joints
Turvey, G. J. & Assassa, J., 5/09/2017, p. 23-28. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Three-Dimensional Water Vapor Visualization in Porous Packing by Near-Infrared Diffuse Transmittance Tomography
Tsaoir, M. N. A., Fernandes, D. L. A., Sa, J., Kitagawa, K., Hardacre, C. & Aiouache, F., 4/07/2012, In: Industrial and Engineering Chemistry Research. 51, 26, p. 8875-8882 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Transient distributions of composition and temperature in a gas-solid packed bed reactor by near-infrared tomography
tSaoir, M. N. A., Abreu Fernandes, D. L., McMaster, M., Kitagawa, K., Hardacre, C. & Aiouache, F., 1/05/2012, In: Chemical Engineering Journal. 189-190, p. 383-392 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Visualization of water vapour flow in a packed bed adsorber by near-infrared diffused transmittance tomography
tSaoir, M. N. A., Abreu Fernandes, D. L., Sa, J., McMaster, M., Kitagawa, K., Hardacre, C. & Aiouache, F., 15/12/2011, In: Chemical Engineering Science. 66, 24, p. 6407-6423 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Evaluation of an in situ spatial resolution instrument for fixed beds through the assessment of the invasiveness of probes and a comparison with a micro-kinetic model
Touitou, J., Aiouache, F., Burch, R., Roy, D., Hardacre, C., Morgan, K., Sa, J., Stewart, C., Stewart, J. & Goguet, A., 11/2014, In: Journal of Catalysis. 319, p. 239-246 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Structural optimisation of a subsoiler
Topakci, M., Celik, H. K., Canakci, M., Karayel, D. & Rennie, A., 09/2010, In: Pakistan Journal of Scientific and Industrial Research. 53, 5, p. 281-287 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Deep tillage tool optimization by means of finite element method: Case study for a subsoiler tine
Topakci, M., Celik, H. K., Canakci, M., Rennie, A., Akinci, I. & Karayel, D., 04/2010, In: Journal of Food, Agriculture and Environment. 8, 2, p. 531-536 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental research on influence of multi-level loading on axial compression behavior of concrete-filled circular steel tubular short columns
Tong, D., Yu, M., Bao, H. & Ye, J., 1/11/2017, In: Jianzhu Jiegou Xuebao/Journal of Building Structures. 38, p. 241-248 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
From Concept to Manufacture: Effective use of CAD and FEA Without Compromising Design Intent
Taylor, S. M., Rennie, A. E. W., Quayle, S. & Rawcliffe, N., 10/06/2005, Rapid Design, Prototyping and Manufacture: Proc. Sixth National Conference on . Rennnie, A., Jacobson, D. & Bocking, C. (eds.). X-CD Technologies Inc, p. 101-107 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Effect of wind loading on low rise buildings using finite element modelling and computational fluid dynamics: A commercially focused appoach
Taylor, S., Rennie, A. & McDonald, W., 2007, Virtual and Rapid Manufacturing: Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J. D. S. (ed.). London: Taylor & Francis Group, p. 811-816 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Single-step laser deposition of functionally graded coating by dual 'wire-powder' or 'powder-powder' feeding: a comparative study
Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 31/07/2007, In: Applied Surface Science. 253, 19, p. 7926-7931 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Coincident wire and powder deposition by laser to form compositionally graded material
Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 21/05/2007, In: Surface and Coatings Technology. 201, 16-17, p. 7083-7091 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Statistical analysis of the effect of processing conditions on powder catchment efficiency in the Direct Laser Deposition (DLD) process
Syed, W. U. H., Pinkerton, A. J., Li, L., Al-Eid, E. & Pan, J., 2005, Virtual modeling and rapid manufacturing: advanced research in virtual and rapid prototyping. Bartolo, P. J., Mateus, A. J., Batista, F. C., Almeida, H. A., Vasco, J. C., Correia, M. A., Alves, N. F., Andre, N. C., Novo, P. P., Lima, P., Custodio, P. C., Martinho, P. G. & Carvolho, R. A. (eds.). London: Taylor and Francis, p. 361-367 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Combining wire and coaxial powder feeding in laser direct metal deposition for rapid prototyping
Syed, W. U. H., Pinkerton, A. J. & Li, L., 30/04/2006, In: Applied Surface Science. 252, 13, p. 4803-4808 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Simultaneous wire- and powder-feed direct metal deposition: An investigation of the process characteristics and comparison with single-feed methods
Syed, W. U. H., Pinkerton, A. J. & Li, L., 02/2006, In: Journal of Laser Applications. 18, 1, p. 65-72 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping
Syed, W. U. H., Pinkerton, A. J. & Li, L., 2005, In: Applied Surface Science. 247, 1-4, p. 268-276 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Combined wire and powder feeding laser direct metal deposition for rapid prototyping
Syed, W. U. H., Pinkerton, A. J. & Li, L., 2004, Proceedings of the 23rd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Single-step graded surface coating using combined wire and powder feeding laser cladding
Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 787-795 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Monitoring degradation in the field
Swingler, J., Jones, J., Bryant, M. D., Feinberg, A., Ma, X. & Weaver, P. M., 30/12/2014, The physics of degradation in engineered materials and devices: fundamentals and principles. Swingler, J. (ed.). Momentum Press , p. 117-151 34 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
Load transfer mechanism of an unwelded, unbolted, grouted connection for prefabricated square tubular columns under axial loads
Sui, L., Fan, S., Huang, Z., Zhang, W., Zhou, Y. & Ye, J., 1/11/2020, In: Engineering Structures. 222, 18 p., 111088.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Realistic Modeling of High Rise Structures subjected to Progressive Collapse
Stephen, D., Ye, J. & Lam, D., 2011, The Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, Crete, Greece..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Progressive Collapse Evaluation of High Rise Steel Structures due to Sudden Loss of Structural Members
Stephen, D., Ye, J. & Lam, D., 2012, Advances in steel concrete composite and hybrid structures : proceedings of the 10th International Conference on Steel Concrete Composite and Hybrid Structures, 2-4 July 2012, Singapore. Liew, J. Y. R. & Lee, S. C. (eds.). Singapore: Research Publishing Services
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An evaluation of modelling approaches and column removal time on progressive collapse of building
Stephen, D., Lam, D., Forth, J., Ye, J. & Tsavdaridis, K. D., 1/02/2019, In: Journal of Constructional Steel Research. 153, p. 243-253 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Developing novel structural composites from recycled materials
Sotayo, A., Green, S. & Turvey, G., 16/12/2014.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Carpet recycling: a review of recycled carpets for structural composites
Sotayo, A., Green, S. & Turvey, G., 04/2015, In: Environmental Technology and Innovation. 3, p. 97-107 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental investigation of recycled carpet composites for barrier structures
Sotayo, A., Green, S. M. & Turvey, G. J., 04/2016.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Benchmark testing and Finite Element (FE) analysis of timber fencing for replacement by novel composite materials
Sotayo, A., Green, S. M. & Turvey, G. J., 11/07/2016, Mechcomp2 2nd International Conference on Mechanics of Composites . Ferreira, A., Neves, A., Viola, E., Tornabene, F. & Fantuzzi, N. (eds.). Bologna: Editrice Esculapio
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Experimental and Finite Element (FE) modelling of timber fencing for benchmarking novel composite fencing
Sotayo, A., Green, S. M. & Turvey, G. J., 15/12/2016, In: Composite Structures. 158, p. 44-55 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
Development and characterisation of novel structural composites from recycled materials
Sotayo, A., 2016, (Unpublished) Lancaster University. 263 p.
Research output: Thesis › Doctoral Thesis
Published
Development, Characterisation and Finite Element Modelling of Novel Waste Carpet Composites for Structural Applications
Sotayo, A., Green, S. & Turvey, G., 10/05/2018, In: Journal of Cleaner Production. 183, p. 686-697 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental investigation and Finite Element (FE) analysis of the load-deformation response of PVC fencing structures
Sotayo, A., Green, S. M. & Turvey, G. J., 1/06/2019, In: structures. 19, p. 424-435 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Recent progress of laser processing technology in micro-LED display manufacturing: A review
Song, L., Yong, X., Zhang, P., Song, S., Chen, K., Yan, H., Sun, T., Lu, Q., Shi, H., Chen, Y. & Huang, Y., 28/02/2025, In: Optics and Laser Technology. 181, 111710.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Dynamic imaging in electrical capacitance tomography and electromagnetic induction tomography using a Kalman filter.
Soleimani, M., Vauhkonen, M., Yang, W. Q., Peyton, A. J., Kim, B. S. & Ma, X., 11/2007, In: Measurement Science and Technology. 18, 11, p. 3287-3294 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A three-dimensional inverse finite-element method applied to experimental eddy-current imaging data.
Soleimani, M., Lionheart, W. R. B., Peyton, A. J., Ma, X. & Higson, S. R., 05/2006, In: IEEE Transactions on Magnetics. 42, 5, p. 1560 -1567
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A 3D inverse finite element technique applied to experimental magnetic induction tomography data.
Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X., 09/2005. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Image reconstruction in 3D magnetic induction tomography using a FEM forward model.
Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X., 09/2003. 4 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Magnetic induction tomography : image reconstruction on experimental data from various applications.
Soleimani, M., Ktistis, C., Ma, X., Yin, W., Lionheart, W. R. B. & Peyton, A. J., 06/2005. 4 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Molten metal flow visualisation using mutual induction tomography (MIT).
Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X., 2004, 2004 Proceedings of the ASME 7th Biennial Conference on Engineering Systems Design & Analysis. Vol. 1. 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Dynamic magnetic induction tomography imaging of molten metal flow using the Kalman filter.
Soleimani, M., Ma, X. & Peyton, A. J., 09/2007. 5 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Axisymmetrical static and dynamic analysis of laminated hollow cylinders composed of monoclinic elastic layers
SOLDATOS, K. P. & Ye, J., 13/07/1995, In: Journal of Sound and Vibration. 184, 2, p. 245-259 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Stationary thermoelastic analysis of thick cross-ply laminated cylinders and cylindrical panels
SOLDATOS, K. P. & Ye, J., 03/1995, In: Acta Mechanica. 110, 1-4, p. 1-18 18 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Wave propagation in anisotropic laminated hollow cylinders of infinite extent
SOLDATOS, K. P. & Ye, J., 12/1994, In: Journal of the Acoustical Society of America. 96, 6, p. 3744-3752 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Three-dimensional static, dynamic, thermoelastic and buckling analysis of homogeneous and laminated composite cylinders
SOLDATOS, K. P. & Ye, J., 1994, In: Composite Structures. 29, 2, p. 131-143 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Three-dimensional buckling analysis of orthotropic cylinders subjected to thermo-mechanical loadings.
Soldatos, K. P. & Ye, J., 1995, Homogeneity and Nonlinearity in Solid Mechanics . Parker, D. F. & England, A. H. (eds.). Kluwer Academic Publishers, (Solid Mechanics and Its Applications; vol. 39).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Previous 1 2 3 4 5 6 7 8 ...11 Next

Research

Manufacturing

Quick Links

Connect With Us