Home > Research > Publications & Outputs >

Research

« Back

Find by keywords:

Engineering

501 - 600 out of 704Page size: 100
  1. Published

    An analytical model of energy distribution in laser direct metal deposition

    Pinkerton, A. J. & Li, L., 2004, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 218, 4, p. 363-374 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  2. Published

    Combined wire and powder feeding laser direct metal deposition for rapid prototyping

    Syed, W. U. H., Pinkerton, A. J. & Li, L., 2004, Proceedings of the 23rd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  3. Published

    Diode laser deposition of microstructurally graded components using gas- and water-atomised powder blends

    Pinkerton, A. J., Syed, W. U. H. & Li, L., 2004, Proceedings of the 23rd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  4. Published

    Electron cyclotron resonance deposition, structure, and properties of oxygen incorporated hydrogenated diamondlike amorphous carbon films

    Adamopoulos, G., Godet, C., Zorba, T., Paraskevopoulos, K. M. & Ballutaud, D., 2004, In: Journal of Applied Physics. 96, 10, p. 5456-5461

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  5. Published

    High-field transport in amorphous carbon and carbon nitride films

    Kumar, S., Godet, C., Goudovskikh, A., Kleider, J. P., Adamopoulos, G. & Chu, V., 2004, In: Journal of Non-Crystalline Solids. 338, p. 349-352 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    Hydrogen content estimation of hydrogenated amorphous carbon by visible Raman spectroscopy

    Adamopoulos, G., Godet, C., Robertson, J. & Morrison, N., 2004, In: Journal of Applied Physics. 96, 11, p. 6348-6352 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Stress transfer in cross-ply laminates with transverse cracks

    Ye, J. & Yang, J., 2004, Computational Mechanics: Proceedings of the Sixth World Congress on Computational Mechanics in conjunction with the Second Asian-Pacific Congress on Computational Mechanics, September 5-10, 2004, Beijing, China . Yao, Z. H., Yuan, M. W. & Zhong, W. X. (eds.). Beijing: Tsinghua University Press & Springer-Verlag

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  8. Published

    The application of photocatalysis in transition metal and actinide redox chemistry

    Boxall, C., Le Gurun, G. & Taylor, R. J., 2004, Recent Research Developments in Photochemistry and Photobiology. Trivandrum, India: Transworld Research Network, Vol. 7. p. 39-78 40 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  9. Published

    The monitoring of pile construction to assess integrity and load carrying capacity of CFA piles.

    Rust, M., Clayton, C., Mure, N., Scott, J., Seward, D. & Quayle, S., 2004, p. 1565-1569. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  10. Published

    What is the future for beam propagation methods?

    Benson, T., Hu, B., Vukovic, A. & Sewell, P., 2004, In: Proceedings of SPIE. 5579

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. Published

    Free-edge effect in cross-ply laminated hollow cylinders subjected to axisymmetric transverse loads

    Ye, J. Q. & Sheng, H. Y., 08/2003, In: International Journal of Mechanical Sciences. 45, 8, p. 1309-1326 18 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  12. Published

    On the particle size and molecular weight distributions of clinical bone cements

    Liu, C. Z., Green, S. M., Watkins, N. D. & McCaskie, A. W., 08/2003, In: Journal of Materials Science Letters. 22, 16, p. 1147-1150 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  13. Published

    Process characteristics and effects of gas- and water-atomized stainless steel powders in laser-based rapid tooling

    Pinkerton, A. J. & Li, L., 08/2003, In: Journal of Laser Applications. 15, 3, p. 172-178 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    The nature and dissemination of UHMWPE wear debris retrieved from periprosthetic tissue of THR.

    Elfick, A. P. D., Green, S. M., Krikler, S. & Unsworth, A., 1/04/2003, In: Journal of Biomedical Materials Research Part A. 65, 1, p. 95-108 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    The effect of laser pulse width on multiple-layer 316L steel clad microstructure and surface finish

    Pinkerton, A. J. & Li, L., 15/03/2003, In: Applied Surface Science. 208-209, p. 411-416 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    A preliminary hip joint simulator study of the migration of a cemented femoral stem

    Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 02/2003, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 217, 2, p. 127-135 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. Published

    Strength and fracture resistance of FRP reinforced concrete flexural members

    Wu, Z. J. & Ye, J. Q., 02/2003, In: Cement and Concrete Composites. 25, 2, p. 253-261 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    DOES THE CLINICAL ENVIRONMENT INFLUENCE THE PROPERTIES OF BONE CEMENT?

    Burt, N., Green, S. M., Sandher, D. S. & Gregg, P. J., 1/01/2003, In: Journal of Bone and Joint Surgery, British Volume. 85-B, SUPP I, p. 13-14 2 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  19. Published

    A three-dimensional state space finite element solution for laminated composite cylindrical shells

    Sheng, H. Y. & Ye, J. Q., 2003, In: Computer Methods in Applied Mechanics and Engineering. 192, 22-24, p. 2441-2459 19 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    An investigation of the effect of pulse frequency in laser multiple-layer cladding of stainless steel

    Pinkerton, A. J. & Li, L., 2003, In: Applied Surface Science. 208-209, p. 405-410 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  21. Published

    Combined finite strip and beam elements for double tee slabs

    Abou Ghadeer, M., Ye, J. & Mansouri, A. H., 2003, Proceedings of the Ninth International Conference on Civil and Structural Engineering Computing: Egmond-aan-Zee, the Netherlands, 2-4 September 2003 . Topping, B. H. V. (ed.). Stirling: Civil-Comp Press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  22. Published

    Direct metal deposition by diode laser: modelling the effect of increased beam coupling

    Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  23. Published

    ECR deposition of hydrogenated diamond-like amorphous carbon films using acetylene-oxygen plasmas

    Adamopoulos, G., Godet, C., Drévillon, B., Saito, Y., Batchelder, D. N., Grosman, A. & Ortega, C., 2003, In: Diamond and Related Materials. 12, 3-7, p. 983-987 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    Effects of powder geometry and composition in coaxial laser deposition of 316L steel for rapid prototyping

    Pinkerton, A. J. & Li, L., 2003, In: CIRP Annals - Manufacturing Technology. 52, 1, p. 181-184 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    Interactions between strip and beam elements of a hollow block slab system

    Abou Ghadeer, M., Ye, J. Q. & Mansouri, A. H., 2003, Computational Fluid and Solid Mechanics 2003, Vols 1 and 2, Proceedings. Bathe, K. J. (ed.). Amsterdam: ELSEVIER SCIENCE PUBL B V, p. 42-46 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  26. Published

    Laminated composite plates and shells: 3D modelling

    Ye, J., 2003, London: Springer-Verlag. 273 p.

    Research output: Book/Report/Proceedings › Book

  27. Published

    Modelling the temperature effects of melt pool position and wall height in additive manufacturing by direct laser deposition

    Pinkerton, A. J. & Li, L., 2003, Proceedings of the 1st International Conference on Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J., Mitchell, G., Mateus, A., Batista, F., Vasco, J., Correia, M., Andre, N., Lima, P., Novo, P., Custodio, P. & Martinho, P. (eds.). Leiria: Escola Superior Tecnologia Gestao Leiria, p. 224-231 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  28. Published

    N+ ion implantation of Ti6Al4V alloy and UHMWPE for total joint replacement application.

    Boampong, D. K., Green, S. M. & Unsworth, A., 2003, In: Journal of Applied Biomaterials and Biomechanics. 1, p. 164-171 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Rapid prototyping using direct laser deposition - the effect of powder atomization type and flowrate

    Pinkerton, A. J. & Li, L., 2003, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 217, 6, p. 741-752 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  30. Published

    The effect of diode laser beam shape and traverse direction on the direct metal deposition process

    Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  31. Published

    The electrochemical reactivity of amorphous hydrogenated carbon nitrides for varying nitrogen contents: the role of the substrate

    Adamopoulos, G., 2003, In: Diamond and Related Materials. 12, 3-7, p. 613-617 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    An in situ electrochemical quartz crystal microbalance study of polycrystalline gold electrodes in nitric acid solution

    Shackleford, S. G. D., Boxall, C., Port, S. N. & Taylor, R. J., 13/12/2002, In: Journal of Electroanalytical Chemistry. 538-539, p. 109-119 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Published

    A study on helix pitch tolerance impact on TWT small-signal gain

    D'Agostino, S. & Paoloni, C., 12/2002, In: IEEE Electron Device Letters. 23, 12, p. 746-748 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  34. Published

    Creep behavior comparison of CMW1 and palacos R-40 clinical bone cements

    Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J., McCaskie, A. W. & Mccaskie, A. W., 11/2002, In: Journal of Materials Science: Materials in Medicine. 13, 11, p. 1021-1028 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  35. Published

    A re-appraisal of wear features of acetabular sockets using atomic force microscopy.

    Elfick, A. P. D., Smith, S. L., Green, S. M. & Unsworth, A., 10/2002, In: Wear. 253, 7-8, p. 839-847 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    Effects of operating parameters on the lubricated wear behavior of a PA-6/UHMWPE blend: a statistical analysis.

    Liu, C. Z., Ren, L. Q., Tong, J., Green, S. M. & Arnell, R. D., 10/2002, In: Wear. 253, 7-8, p. 878-884 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    On the influence of electron-beam parameters on TWT small-signal gain

    D'Agostino, S. & Paoloni, C., 20/09/2002, In: Microwave and Optical Technology Letters. 34, 6, p. 433-434 2 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Published

    A state space finite element for laminated composite plates

    Sheng, H. Y. & Ye, J. Q., 16/08/2002, In: Computer Methods in Applied Mechanics and Engineering. 191, 37-38, p. 4259-4276 18 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  39. Published

    A semi-analytical finite element for laminated composite plates

    Sheng, H. Y. & Ye, J. Q., 07/2002, In: Composite Structures. 57, 1-4, p. 117-123 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    Photoelectrochemistry with the optical rotating disc electrode Part 4. Steady state and transient studies on colloidal US in the presence of solution phase photogenerated charge scavengers

    Boxall, C., 31/05/2002, In: Journal of Photochemistry and Photobiology A: Chemistry. 148, 1-3, p. 375-386 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  41. Published

    Dynamic elastic local buckling of piles under impact loads

    Yang, J. & Ye, J. Q., 05/2002, In: Structural Engineering and Mechanics. 13, 5, p. 543-556 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  42. Published

    Fast computation of FET power gains

    Paoloni, C., 20/04/2002, In: Microwave and Optical Technology Letters. 33, 2, p. 104-106 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Published

    Injection Mould Tool Manufacture in Less Than Five Days

    Jacobson, D. M., Bocking, C. E. & Rennie, A., 03/2002, RAPRA Rapid Tooling Conference 2002: Conference Proceedings. RAPRA, p. 35-43 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  44. Published

    Co-deposition of titanium/polytetrafluoroethylene films by unbalanced magnetron sputtering

    Liu, C., Fairhurst, R. G., Ren, L. Q., Green, S. M., Tong, J. & Arnell, R. D., 15/01/2002, In: Surface and Coatings Technology. 149, 2-3, p. 143-150 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  45. Published

    A comparative study of multiple layer laser deposition using water and gas atomised 316L stainless steel powders

    Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  46. Published

    A verified model of the behaviour of the axial powder stream concentration from a coaxial laser cladding nozzle

    Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  47. Published

    AFM measurement of nanoscale topographical and material wear features

    Green, S., Elfick, A. P. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/032

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  48. Published

    Direct laser deposition layer profiles and the factors affecting them

    Pinkerton, A. J. & Li, L., 2002.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  49. Published

    High-field transport and noise properties of sputter-deposited amorphous carbon-silicon heterojunctions

    Hastas, N. A., Dimitriadis, C. A., Panayiotatos, Y., Tassis, D. H., Logothetidis, S., Papadimitriou, D., Roupakas, G. & Adamopoulos, G., 2002, In: Semiconductor Science and Technology. 17, 7, p. 662-667 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  50. Published

    Interfacial stresses in plated beams with cracks

    Yang, J. & Ye, J. Q., 2002, In: Composite Structures. 57, 1-4, p. 125-134 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  51. Published

    Ion beam modification of Ti6Al4V alloy for TJR

    Green, S., Boampong, D. K. & Unsworth, A., 2002, p. L68.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  52. Published

    Laser rapid manufacturing process advancement through powder morphology

    Pinkerton, A. J., 2002.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  53. Published

    Migration of a cemented hip joint prosthesis within a novel composite femur

    Green, S., Gregg, P., Liu, C., Watkins, N. D. & McCaskie, A. W., 2002, International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  54. Published

    Nanoscale wear degradation of alumina femoral head bearing surfaces assessed using an atomic force microscope

    Green, S., Scholes, S. C. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/036

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  55. Published

    Nanotribological characterisation of alumina femoral heads using an atomic force microscope

    Scholes, S. C., Green, S. M. & Unsworth, A., 2002, In: Key Engineering Materials. 218-220, p. 543-548 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  56. Published

    On the influence of protein adsorption to phagocytosis of model polyethylene particles

    Green, S., Elfick, A. P., Birch, M. A. & McCaskie, A. W., 2002, International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. L27

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  57. Published

    Recent Studies of Heterogeneous and Homogeneous Reduction–Oxidation Reactions of U(IV) Ions in Nitric Acid and TBP Phases

    Boxall, C., Taylor, R., Xiao, S., Koltunov, V. & Marchenko, V., 2002, Proceedings of 3rd NUCEF International Symposium: NUCEF 2001: Scientific Basis for Criticality Safety, Separations and Waste Disposal. Banba, T. & Tsubata, Y. (eds.). Tokai, Ibaraki, Japan: Japan Atomic Energy Research Institute, p. 205-212 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  58. Published

    Restrained creep of CMW2000 Bone Cement

    Green, S., Liu, C., Watkins, N. D., McCaskie, A. W. & Gregg, P. J., 2002, p. T84. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  59. Published

    The dynamic volume changes of polymerising polymethyl methacrylate bone cement

    Muller, S. D., Green, S. M. & McCaskie, A. W., 2002, In: Acta Orthopaedica Scandinavica. 73, 6, p. 684-687 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  60. Published

    The influence of radial clearance and wear testing on the tribology of alumina-alumina total hip prostheses

    Green, S., Scholes, S. C. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/037

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  61. Published

    The morphology of UHMWPE wear debris released from shoulder prostheses

    Green, S., Elfick, A. P., Frostick, S. P. & Unsworth, A., 2002, p. 105. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  62. Published

    The reduction of Pu(IV) by formohydroxamic acid in nitric acid.

    Boxall, C., Taylor, R. J., Mason, C. & Cooke, R., 2002, In: Journal of Nuclear Science and Technology. supplement 3, p. 278-281 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  63. Published

    Impact of process parameters in 40 GHz traveling-wave amplifiers

    D'Agostino, S. & Paoloni, C., 20/12/2001, In: Microwave and Optical Technology Letters. 31, 6, p. 421-423 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  64. Published

    The Fabrication of MMC Electronic Packages using Thin Shell Electroformed (TSE) EDM Electrodes

    Bocking, C., Jacobson, D. M., Rennie, A. & Bennett, G., 10/2001. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  65. Published

    An Investigation into the Use of Spray Formed Al/Si Metal Matrix Composites for Use as Injection Mould Die Inserts

    Bocking, C., Jacobson, D. M. & Rennie, A., 09/2001, Time Compression technologies Conference 2001: Proceedings of. Rapid News Publications PLC, 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  66. Published

    Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming

    Bocking, C., Jacobson, D. M. & Rennie, A., 06/2001, 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of: iMAPS Strasbourg 2001, "The Millenium Conference". p. 412-415 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  67. Published

    The quantitative assessment of UHMWPE wear debris produced in hip simulator testing: the influence of head material and roughness, motion and loading.

    Elfick, A. P. D., Smith, S. L., Green, S. M. & Unsworth, A., 06/2001, In: Wear. 249, 5-6, p. 517-527 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  68. Published

    The wear of metal-on-metal total hip prostheses measured in a hip simulator.

    Scholes, S. C., Green, S. M. & Unsworth, A., 06/2001, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 215, 6, p. 523-530 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  69. Published

    Helix wire tolerances in TWT small-signal gain prediction

    D'Agostino, S. & Paoloni, C., 5/05/2001, In: Microwave and Optical Technology Letters. 29, 3, p. 208-209 2 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  70. Published

    Edge effects in angle-ply laminated hollow cylinders

    Ye, J. Q., 05/2001, In: Composite Structures. 52, 2, p. 247-253 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  71. Published

    Some failure modes of four clinical bone cements

    Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 1/04/2001, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 215, 4, p. 359-366 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  72. Published

    Statistical wear analysis of PA-6/UHMWPE alloy, UHMWPE and PA-6.

    Liu, C. Z., Ren, L. Q., Tong, J., Joyce, T. J., Green, S. M. & Arnell, R. D., 04/2001, In: Wear. 249, 1-2, p. 31-36 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  73. Published

    Decay rate of edge effects in cross-ply-laminated hollow cylinders

    Ye, J. Q., 02/2001, In: International Journal of Mechanical Sciences. 43, 2, p. 455-470 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  74. Published

    Compression failure mode of two CMW bone cements

    Green, S., Liu, C., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 2001, European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001.. London: European Society for Biomaterials, p. P51

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  75. Published

    How size affects the mobility of THR wear debris

    Green, S., Elfick, A. P. D. & Liu, C., 2001, European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001.. London: European Society for Biomaterials, p. T41

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  76. Published

    Hydrogen and disorder in diamond-like carbon

    Kleinsorge, B., Rodil, S. E., Adamopoulos, G., Robertson, J., Grambole, D. & Fukarek, W., 2001, In: Diamond and Related Materials. 10, 3-7, p. 965-969 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  77. Published

    Interfacial shear transfer of RC beams strengthened by bonded composite plates

    Ye, J. Q., 2001, In: Cement and Concrete Composites. 23, 4-5, p. 411-417 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  78. Published

    Study and applications of a Bounding Method in stability analysis of Stiffened composite aerospace panels

    Ye, J., 2001, Solids, structures and coupled problems in engineering : : proceedings of the 2nd European Conference on Computational Mechanics 26-29 June 2001, Cracow Poland. Waszczyszyn , Z. & Pamin, J. (eds.). Cracow: Cracow University of Technology

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  79. Published

    The absence of nanometre sized UHMWPE wear particles retrieved from ex-vivo tissue

    Green, S., Elfick, A. P. & Unsworth, A., 2001, Trans 4th Combined meeting Orthopaedic Research Societies of the USA, Europe Canada and Japan. Chicago, Ill. : Orthopaedic research society, p. 93 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  80. Published

    The friction and lubrication of alumina-on-alumina total hip prostheses - The effect of radial clearance and wear testing.

    Scholes, S. C., Green, S. M. & Unsworth, A., 2001, In: Key Engineering Materials. 218-220, p. 535-540 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  81. Published

    The Micro-Optical Ring Electrode: development of a thin ring electrode for spectrophotoelectrochemistry

    Boxall, C., Andrieux, F., Xiao, S. & O'Hare, D., 2001, Chemical and Biological Sensors and Analytical Methods II. Butler, M. A., Vanysek , P. & Yamazoe , N. (eds.). Pennington, New Jersey: ELECTROCHEMICAL SOCIETY INC, p. 531-543 13 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  82. Published

    Analysis of high-efficiency multistage depressed collectors based on the 3-D finite-element method

    D'Agostino, S. & Paoloni, C., 20/11/2000, In: Microwave and Optical Technology Letters. 27, 4, p. 275-278 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  83. Published

    Electroforming of a Thermojet Master Pattern for use as an Electro-Discharge Machine Electrode

    Bocking, C., Rennie, A., Bennett, G. & Lewis, N., 10/2000, Time Compression Technologies 2000 Conference: Proceedings of. Rapid News Publications PLC, p. 151-156 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  84. Published

    Closure to “Buckling Analysis of Angle‐Ply Multilaminated Long Hollow Cylinders”

    Ye, J. Q., 08/2000, In: Journal of Engineering Mechanics. 126, 8, p. 887-887 1 p.

    Research output: Contribution to Journal/Magazine › Editorial › peer-review

  85. Published

    HEMT-HBT matrix amplifier

    Paoloni, C., 08/2000, In: IEEE Transactions on Microwave Theory and Techniques. 48, 8, p. 1308-1312 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  86. Published

    Micro-mechanical analysis of splitting failure in concrete reinforced with fiber reinforced plastic rods

    Ye, J. Q. & Wu, Z. J., 08/2000, In: Cement and Concrete Composites. 22, 4, p. 243-251 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  87. Published

    Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models

    Bocking, C. E., Rennie, A. & Bennett, G. R., 08/2000, 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin, p. 469-477 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  88. Published

    A finite-element 3-D method for the design of TWT collectors

    D'Agostino, S. & Paoloni, C., 20/07/2000, In: Microwave and Optical Technology Letters. 26, 2, p. 119-122 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  89. Published

    Sensitivity analysis of TWT's small signal gain based on the effect of rod shape and dimensions

    D'Agostino, S., Emma, F. & Paoloni, C., 07/2000, In: IEEE Transactions on Electron Devices. 47, 7, p. 1457-1462 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  90. Published

    Effect of mechanical tolerance of T-shaped rods in a TWT based on a helix slow-wave structure

    D'Agostino, S. & Paoloni, C., 20/06/2000, In: Microwave and Optical Technology Letters. 25, 6, p. 393-395 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  91. Published

    Surface modification of PTFE by plasma treatment

    Liu, C., Arnell, R. D., Gibbons, A. R., Green, S. M., Ren, L. & Tong, J., 06/2000, In: Surface Engineering. 16, 3, p. 215-217 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  92. Published

    3D analysis of stress transfer in the micromechanics of fiber reinforced composites by using an eigen-function expansion method

    Wu, Z. J., Ye, J. Q. & Cabrera, J. G., 05/2000, In: Journal of the Mechanics and Physics of Solids. 48, 5, p. 1037-1063 27 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  93. Published

    A novel technique for the detailed size characterization of wear debris.

    Elfick, A. P., Green, S. M., Pinder, I. M. & Unsworth, A., 05/2000, In: Journal of Materials Science: Materials in Medicine. 11, 5, p. 267-271 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  94. Published

    A simplified procedure to calculate the power gain definitions of FET's

    Paoloni, C., 03/2000, In: IEEE Transactions on Microwave Theory and Techniques. 48, 3, p. 470-474 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  95. Published

    Comparative analysis of bone cement fracture surfaces

    Green, S., Liu, C., Watkins, N. D. & McCaskie, A. W., 2000, 11th International Conference on Deformation, Yield and Fracture of Polymers : 10 - 13 April 2000, Churchill College, Cambridge, UK.. Cambridge : IOM communications, p. 325-328 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  96. Published

    Cytomcompatibility evaluation of surface modified Ni-Ti shape memory alloy using the MTT assay

    Green, S., Grant, D. M. & Wood, J. V., 2000, Processing and fabrication of advanced materials VIII : proceedings of a symposium ... September 8-10, 1999, Mandarin Hotel, Orchard Road, Singapore . Khor, K. A. (ed.). Singapore: World Scientific Publishing, p. 141-148 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  97. Published

    Determination of bonding in amorphous carbons by electron energy loss spectroscopy, Raman scattering and X-ray reflectivity

    Ferrari, A. C., Kleinsorge, B., Adamopoulos, G., Robertson, J., Milne, W. I., Stolojan, V., Brown, L. M., LiBassi, A. & Tanner, B. K., 2000, In: Journal of Non-Crystalline Solids. 266-269, p. 765-768 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  98. Published

    Edge effects in cross-ply laminated hollow cylindrical shells

    Ye, J. Q., 2000, Computational techniques for materials, composites and composite structures. Topping, B. (ed.). Edinburgh: Civil-Comp Press, p. 359-363 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  99. Published

    Interfacial effects on stress transfer in fiber-reinforced composites

    Wu, Z. J., Ye, J. Q. & Cabrera, J. G., 2000, In: Mechanics of Composite Materials and Structures. 7, 4, p. 315-330 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  100. Published

    Photoelectrochemistry with the optical rotating disc electrode - Part 1. The theoretical analysis for photophysical-electrochemical processes

    Boxall, C. & Albery, W. J., 2000, In: Physical Chemistry Chemical Physics. 2, 16, p. 3631-3639 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 12 3 4 5 6 7 8 Next

Back to top