School of Engineering

View graph of relations

Faculty of Science and Technology

Show 14 centres, groups and clusters

Hide 14 centres, groups and clusters

4601 - 4700 out of 6,515Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Author last name

Published
Novel Time Domain Technique for Photonic Bandgap Resonant Cavities
Pinto, D. & Obayya, S., 2008. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract
Published
Finite Volume Time Domain Analysis of Nonlinear Photonic Crystal Devices
Pinto, D. & Obayya, S., 2008. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract
Published
Novel Dual-Mesh Finite Volume Time Domain Method for the Analysis of Photonic Crystal Based Devices
Pinto, D. & Obayya, S., 2010. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract
Published
Evaluation of performance and operation viability of non-uniform potential solid oxide fuel cell fueled by reformed methane
Piroonlerkgul, P., Kiatkittipong, W., Wongsakulphasatch, S., Aiouache, F. & Assabumrungrat, S., 15/01/2014, In: Journal of Power Sources. 246, p. 719–728 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Prediction of product morphology of lyophilized drugs in the case of Vacuum Induced Surface Freezing
Pisano, R. & Capozzi, L. C., 2/09/2017, In: Chemical Engineering Research and Design. 125, p. 119-129 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Achieving continuous manufacturing in lyophilization: Technologies and approaches
Pisano, R., Arsiccio, A., Capozzi, L. C. & Trout, B. L., 1/09/2019, In: European Journal of Pharmaceutics and Biopharmaceutics. 142, p. 265-279 15 p.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
Characterization of the mass transfer of lyophilized products based on X-ray micro-computed tomography images
Pisano, R., Barresi, A. A., Capozzi, L. C., Novajra, G., Oddone, I. & Vitale-Brovarone, C., 11/06/2017, In: Drying Technology. 35, 8, p. 933-938 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Drawbacks of Batch Processing, Current Status, and Perspectives
Pisano, R., Capozzi, L. C. & Corver, J. A., 24/10/2019, Continuous Manufacturing in Lyophilization of Pharmaceuticals. CRC Press ed. Routledge, 20 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Influence of the freezing protocol on the activity of lactate dehydrogenase after freeze-drying
Pisano, R., Napoletano, F., Paladini, A., De Beer, T. & Capozzi, L., 2017.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Continuous freeze-drying and its relevance to the pharma/biotech industry
Pisano, R., Capozzi, L. & Trout, B. L., 2017.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
A compact and efficient multi-mode antenna for parallel transmission of 7T magnetic resonance imaging
Pitman, S. & Hu, J., 11/2013, 2013 Loughborough Antennas & Propagation Conference. Loughborough, UK: IEEE, p. 534-538 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Optimisation studies for a high gradient proton Linac for application in proton imaging: ProBE: Proton Boosting Linac for imaging and therapy
Pitman, S., 27/09/2019, Lancaster University. 273 p.
Research output: Thesis › Doctoral Thesis
Published
Producing Useful Chemicals Using a Nuclear Reactor
Plant, A., Najdanovic, V., Joyce, M., Jazbec, A. & Snoj, L., 20/01/2020.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Nuclear-driven production of renewable fuel additives from waste organics
Plant, A. G., Kos, B., Jazbec, A., Snoj, L., Najdanovic-Visak, V. & Joyce, M. J., 17/09/2021, In: Communications Chemistry. 4, 1, 132.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Radiation-directed production of chemical reagents and petroleum additives from waste organic feedstocks
Plant, A., 9/02/2023, Lancaster University. 255 p.
Research output: Thesis › Doctoral Thesis
Published
Nuclear Cogeneration of Methanol and Acetaldehyde from Ethylene Glycol Using Ionizing Radiation
Plant, A., Kos, B., Jazbec, A., Snoj, L., Joyce, M. & Najdanovic‐Visak, V., 13/12/2023, In: Industrial and Engineering Chemistry Research. 62, 49, p. 21152-21163 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Neutron and gamma fields at neutron spallation sources for single-event-effects testing
Platt, S. P., Hong, Q., Mein, S. J. & Zhang, L. H., 28/10/2013, Proceedings of the European Conference on Radiation and its Effects on Components and Systems, RADECS. Institute of Electrical and Electronics Engineers Inc., 4 p. 6937365. (Proceedings of the European Conference on Radiation and its Effects on Components and Systems, RADECS).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Fidelity of energy spectra at neutron facilities for single-event effects testing
Platt, S. P., Prokofiev, A. V. & Xiao, C. X., 20/10/2010, 2010 IEEE International Reliability Physics Symposium, IRPS 2010. IEEE, p. 411-416 6 p. 5488795. (IEEE International Reliability Physics Symposium Proceedings).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Charge-collection and single-event upset measurements at the ISIS neutron source
Platt, S., Torok, Z., Frost, C. D. & Ansell, S., 2008, In: IEEE Transactions on Nuclear Science. 55, 4, p. 2126 - 2132 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Charge-collection and single-event upset measurements at the ISIS neutron source
Platt, S. P., Torok, Z., Frost, C. D. & Ansell, S., 2007, 6 p. IEEE.
Research output: Other contribution
Published
Analysis of SEE-inducing charge generation in the neutron beam at the Svedberg laboratory
Platt, S. P. & Török, Z., 1/08/2007, In: IEEE Transactions on Nuclear Science. 54, 4, p. 1163-1169 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Development and application of a neutron sensor for single event effects analysis
Platt, S. P., Cassels, B. & Torok, Z., 1/01/2005, In: Journal of Physics: Conference Series. 15, 1, p. 172-176 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Thermal neutron absorption in printed circuit boards
Platt, S., August, S., MacLeod, M., Anderson, M., Cheneler, D. & Monk, S., 31/03/2021, In: IEEE Transactions on Nuclear Science. 68, 4, p. 463 - 469 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
UV integrated optics devices based on beta-barium borate
Poberaj, G., Degl'Innocenti, R., Medrano, C. & Günter, P., 05/2009, In: Optical Materials. 31, 7, p. 1049-1053 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Relative response of TL and component-resolved OSL to alpha and beta radiations in annealed sedimentary quartz
Polymeris, G. S., Afouxenidis, D., Raptis, S., Liritzis, I., Tsirliganis, N. C. & Kitis, G., 10/2011, In: Radiation Measurements. 46, 10, p. 1055-1064 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The TL and room temperature OSL properties of the glow peak at 110°C in natural milky quartz: a case study
Polymeris, G. S., Afouxenidis, D., Tsirliganis, N. C. & Kitis, G., 01/2009, In: Radiation Measurements. 44, 1, p. 23-31 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Thermally assisted OSL from deep traps in Al2O3:C
Polymeris, G. S., Raptis, S., Afouxenidis, D., Tsirliganis, N. C. & Kitis, G., 03/2010, In: Radiation Measurements. 45, 3-6, p. 519-522 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
346 GHz BWO for fusion plasma diagnostics
Popovic, B., Barchfeld, R., Tang, X., Zhang, F., Yue, L., Mineo, M., Letizia, R., Paoloni, C., Domier, C. W. & Luhmann Jr., N. C., 2014.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Design and fabrication of a sheet beam BWO at 346 GHz
Popovic, B., Himes, L., Gamzina, D., Luhmann Jr., N. C., Paoloni, C., Letizia, R., Mineo, M., Malek Abadi, A., Yue, L., Tang, X., Feng, J., Tang, Y., Gao, M. & Zhang, F., 04/2015, Vacuum Electronics Conference (IVEC), 2015 IEEE International . IEEE, p. 1-2 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Electron gun and CVD diamond window for a 346 GHz sheet beam BWO
Popovic, B., Zheng, Y., Himes, L., Gamzina, D., Luhmann Jr., N. C., Paoloni, C., Letizia, R., Feng, J., Tang, Y., Gao, M., Zhang, F., Yue, L., Tang, X. & Ting, L., 19/04/2016, Proceedings of the 17th IEEE International Vacuum Electronics Conference (IVEC 2016). IEEE
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Nonadiabatic switching of a photonic band structure: Ultrastrong light-matter coupling and slow-down of light
Porer, M., Ménard, J. M., Leitenstorfer, A., Huber, R., Degl'Innocenti, R., Zanotto, S., Biasiol, G., Sorba, L. & Tredicucci, A., 3/02/2012, In: Physical review B. 85, 8, 4 p., 081302.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fission induced by heavy ions: new results from euro g am array
Porquet, M. G., Azaiez, F., Sharpey-Schafer, J. F., Astier, A., Bastin, G., Beausang, C. W., Bourgeois, C., Clark, R. M., Deloncle, I., Duprat, J., Gall, B. J. P., Hannachi, F., Joyce, M. J., Kaci, M., Korichi, A., Coz, Y. L. E., Meyer, M., Perrin, N., Poffe, N. & Redon, N. & 5 others, Schück, C., Sergolle, H., Simpson, J., Smith, A. G. & Wadsworth, R., 1/12/1996, In: Acta Physica Polonica B. 27, 1-2, p. 179-185 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Two-proton high-K oblate structures in ¹⁹⁴Pb
Porquet, M. G., Hannachi, F., Bastin, G., Brindejonc, V., Deloncle, I., Gall, B., Schuck, C., Smith, A. G., Azaiez, F., Bourgeois, C., Duprat, J., Korichi, A., Perrin, N., Poffe, N., Sergolle, H., Astier, A., Le Coz, Y., Meyer, M., Redon, N. & Simpson, J. & 5 others, Sharpey-Schafer, J. F., Joyce, M. J., Beausang, C. W., Wadsworth, R. & Clark, R. M., 1/12/1994, In: Journal of Physics G: Nuclear and Particle Physics. 20, 5, p. 765-773 9 p., 010.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Integration of modelling and conceptual design applied to mechatronics.
Porter, I., Bradshaw, A., Counsell, J. M. & Nagy, Z., 2002, Proceedings of the mechatronics forum international conference (Mechatronics 2002).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Schemebuilder mechatronics.
Porter, I., 1998, Proceedings of the engineering design conference ’98: design reuse. Brunel University, p. 561-568 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Knowledge representation for mechatronic systems.
Porter, I., Counsell, J. M. & Shao, J., 1998, Computer Aided Conceptual Design ’98: proceedings of the 1998 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. M. (eds.). p. 181-196 16 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Two case studies for applying Model Predictive Controllers on chemical processes
Pour, N. D., Montazeri, A., Poshtan, J. & Motlahgh, M. R. J., 2007, Industrial Electronics Society, 2007. IECON 2007. 33rd Annual Conference of the IEEE. New York: IEEE, p. 580-585 6 p. (IEEE Industrial Electronics Society).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Atmospheric hydrodeoxygenation of bio-oil oxygenated model compounds: A review
Pourzolfaghar, H., Abnisa, F., Wan Daud, W. M. A. & Aroua, M. K., 08/2018, In: Journal of Analytical and Applied Pyrolysis. 133, p. 117-127 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Gas-phase hydrodeoxygenation of phenol over Zn/SiO2 catalysts: Effects of zinc load, temperature, weight hourly space velocity, and H ₂ volumetric flow rate
Pourzolfaghar, H., Abnisa, F., Wan Daud, W. M. A. & Aroua, M. K., 1/07/2020, In: Biomass and Bioenergy. 138, 10 p., 105556.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Catalyst characteristics and performance of silica-supported zinc for hydrodeoxygenation of phenol
Pourzolfaghar, H., Abnisa, F., Wan Daud, W. M. A., Aroua, M. K. & Mahlia, T. M. I., 1/06/2020, In: Energies. 13, 11, 13 p., 2802.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Repurposing of metal support structures to form powder for use in additive manufacturing
Powell, D., Rennie, A., Molyneux, A., Burns, N. & Geekie, L., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Unpublished
Recycling and reuse of metal powders for various applications in additively manufactured products
Powell, D., 7/04/2020, (Unpublished) Lancaster University. 176 p.
Research output: Thesis › Master's Thesis
Published
Understanding powder degradation in metal additive manufacturing to allow the upcycling of recycled powders
Powell, D., Rennie, A., Geekie, L. & Burns, N., 20/09/2020, In: Journal of Cleaner Production. 268, 15 p., 122077.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Liquid-liquid phase equilibria of aqueous biphasic systems based on glycerol formal: Application on tetracycline recovery from water
Praikaew, W., Kiatkittipong, W., Kiatkittipong, K., Assabumrungrat, S., Aiouache, F. & Najdanovic-Visak, V., 1/11/2019, In: Journal of Chemical and Engineering Data. 64, 11, p. 4856-4862 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Process and Energy Intensification of Glycerol Carbonate Production from Glycerol and Dimethyl Carbonate in the Presence of Eggshell-Derived CaO Heterogeneous Catalyst
Praikaew, W., Kiatkittipong, W., Aiouache, F., Najdanovic-Visak, V., Ngaosuwan, K., Wongsawaeng, D., Wei Lim, J., Shiung Lam, S., Kiatkittipong, K., Laosiripojana, N., Boonyasuwat, S. & Assabumrungrat, S., 14/07/2021, In: Energies. 14, 14, 15 p., 4249.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Mechanism of CaO catalyst deactivation with unconventional monitoring method for glycerol carbonate production via transesterification of glycerol with dimethyl carbonate
Praikaew, W., Kiatkittipong , W., Aiouache, F., Najdanovic-Visak, V., Termtanun, M., Wei Lim, J., Shiung Lam, S., Kiatkittipong, K., Laosiripojana, N., Boonyasuwat, S. & Assabumrungrat, S., 28/02/2022, In: International Journal of Energy Research. 46, 2, p. 1646-1658 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Synthesis of glycerol carbonate from dimethyl carbonate and glycerol using CaO derived from eggshells
Praikaew, W., Kiatkittipong, W., Kiatkittipong, K., Laosiripojana, N., iriya-empikul, N., Boonyasuwat, S., Aiouache, F., Najdanovic‐Visak, V. & Assabumrungrat, S., 14/08/2018, In: MATEC Web of Conferences. 192, 03045, 4 p., 03045.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Stress-induced curvature of focused ion beam fabricated microcantilevers
Prewett, P. D., Anthony, C. J., Cheneler, D. & Ward, M. C. L., 8/04/2008, In: Micro and Nano Letters. 3, 1, p. 25-28 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Novel developments in the MOSFET dosemeter for neutron dosimetry applications
Price, R. A., Benson, C., Joyce, M. J., Kestell, D. J. & Silvie, J., 2004, In: Radiation Protection Dosimetry. 110, 1-4, p. 283-290 8 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Development of a linear array for intracavitary in vivo dosimetry during external beam radiotherapy and brachytherapy.
Price, R. A., Benson, C., Joyce, M. J. & Rogers, K., 2004, In: IEEE Transactions on Nuclear Science. 51, 4, p. 1420-1426 7 p., 8076167 .
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Development of a linear array for intracavatary in vivo dosimetry during external beam radiotherapy and brachytherapy.
Price, R. A., Benson, C., Joyce, M. J. & Rogers, K., 2003, Proceedings of the nuclear science symposium, medical imaging conference: 13th international workshop on room temperature semiconductor X- and gamma-ray detectors.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Novel developments in the MOSFET for neutron radiation dosimetry applications
Price, R. A., Kestell, D. J., Stevens, D. L., Jaksic, A., Silvie, J. & Joyce, M. J., 2003, Proceedings of the 9th neutron dosimetry symposium.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Data-Based Mechanistic Modelling (DBM) and control of mass and energy transfer in agricultural buildings
Price, L., Young, P. C., Berckmans, D., Janssens, K. & Taylor, C. J., 1999, In: Annual Reviews in Control. 23, 1, p. 71-82 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An approach to realistic fault prediction and layout design for testability in analogue circuits.
Prieto, J., Richardson, A. M. D., Rueda, A. & Grout, I., 1998, Proceedings of the conference on design, automation and test in Europe. Paris, p. 906-912 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An approach to realistic fault prediction and layout design for testability in analog circuits
Prieto, J. A., Rueda, A., Grout, I., Peralias, E., Huertas, J. L. & Richardson, A. M. D., 1998, Design, Automation and Test in Europe, 1998 Proceedings. LOS ALAMITOS: IEEE COMPUTER SOC, p. 905-909 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A fast interpolation approach for the calculation of permittivity and conductivity to estimate the SAR
Priyadarshi, S., Pitman, S., Glover, P., Shah, S., Ye, J., Hu, B. & Letizia, R., 8/12/2014, RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-Bio), 2014 IEEE MTT-S International Microwave Workshop Series on. IEEE, p. 261-266 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Characterization of the ANITA neutron source for accelerated SEE testing at the Svedberg Laboratory
Prokofiev, A. V., Blomgren, J., Majerle, M., Nolte, R., Röttger, S., Platt, S. P., Xiao, C. X. & Smirnov, A. N., 1/12/2009, 2009 IEEE Radiation Effects Data Workshop, REDW 2009 - Workshop Record, Held in Conjunction with the IEEE Nuclear and Space Radiation Effects Conference, NSREC 2009. IEEE, p. 166-173 8 p. 5336295. (IEEE Radiation Effects Data Workshop).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
ANITA - A new neutron facility for accelerated SEE testing at the Svedberg Laboratory
Prokofiev, A. V., Blomgren, J., Platt, S. P., Nolte, R., Röttger, S. & Smirnov, A. N., 17/11/2009, 2009 IEEE International Reliability Physics Symposium, IRPS 2009. IEEE, p. 929-935 7 p. 5173383. (IEEE International Reliability Physics Symposium Proceedings).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Characterization of the ANITA neutron source for accelerated SEE testing at the Svedberg laboratory
Prokofiev, A. V., Blomgren, J., Nolte, R., Platt, S. P., Röttger, S. & Smirnov, A. N., 1/12/2008, 2008 European Conference on Radiation and Its Effects on Components and Systems, RADECS 2008. IEEE, p. 260-267 8 p. 5782723. (Proceedings of the European Conference on Radiation and its Effects on Components and Systems, RADECS).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper
Published
Design, optimization and characterization of freeze-dried emulsions based on sodium alginate and whey protein isolate intended for cosmetic and dermatological applications
Prus-Walendziak, W., Douglas, T. & Kozlowska, J., 30/06/2025, In: ACS Omega. 10, 23, p. 24932-24949 18 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Mathematical Model Analysis for Mass and Rates of Woodchip IR Drying
Pryce, M., Cheneler, D., Martin, A. & Aiouache, F., 16/08/2020, Proceedings of the 6th World Congresson Mechanical, Chemical, and Material Engineering. Avestia , 9 p. HTFF 177. ( Proceedings of the 6th World Congresson Mechanical, Chemical, and Material Engineering).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A Comparative Study of Diffusion Coefficients from Convective and IR Drying of Woodchip
Pryce, M., Cheneler, D., Martin, A. & Aiouache, F., 16/11/2020, In: Journal of Fluid Flow, Heat and Mass Transfer. 7, p. 66-72 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An Experimental and CFD Based Analysis on Industrial Biomass Drying Production
Pryce, M., 2021, Lancaster University. 249 p.
Research output: Thesis › Master's Thesis
Published
Atmospheric drivers of wind turbine blade leading edge erosion: Ancillary variables
Pryor, S. C., Barthelmie, R. J., Campobasso, S., Delwik, E., Hannisdottir, A., Hassager, C., Kral, S., Reuder, J., Rodgers, M. & Veraat, M., 15/03/2023, International Energy Agency Wind Division.
Research output: Contribution to specialist publication › Technical Report › peer-review
Published
Prioritizing Research for Enhancing the Technology Readiness Level of Wind Turbine Blade Leading-Edge Erosion Solutions
Pryor, S. C., Barthelmie, R. J., Coburn, J. J., zhou, X., Rodgers, M., Norton, H., Campobasso, S., Mendez-Lopez, B., Bay Hassager, C. & Mishnaevsky, Jr., L., 13/12/2024, In: Energies. 17, 24, 29 p., 6285.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The influence of lifestyle factors on bone mineral density at the mid radius assessed using pQCT
Pye, S. R., Ward, K. A., Roy, D. K., Swarbrick, C. M., Adams, J. E., Silman, A. J. & O'Neill, T. W., 2005, In: Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research. 20, 9, p. S378 1 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Electrospinning of Chitosan-Based Solutions for Tissue Engineering and Regenerative Medicine
Qasim, S. B., Zafar, M. S., Najeeb, S., Khurshid, Z., Shah, A. H., Husain, S. & Rehman, I. U., 02/2018, In: International Journal of Molecular Sciences. 19, 2, 26 p., 407.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
In- vitro and in -vivo degradation studies of freeze gelated porous chitosan composite scaffolds for tissue engineering applications
Qasim, S. B., Husain, S., Huang, Y., Pogorielov, M., Deineka, V., Lyndin, M., Rawlinson, A. & Rehman, I. U., 1/02/2017, In: Polymer Degradation and Stability. 136, p. 31-38 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Application of nanomaterials in dentistry: Micro and Nanomanufacturing
Qasim, S. B. & Rehman, I. U., 2017, Micro and Nanomanufacturing. Springer International Publishing, Vol. 2. p. 319-336 18 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Freeze gelated porous membranes for periodontal tissue regeneration
Qasim, S. B., Delaine-Smith, R. M., Fey, T., Rawlinson, A. & Rehman, I. U., 1/09/2015, In: Acta Biomaterialia. 23, p. 317-328 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Potential of electrospun chitosan fibers as a surface layer in functionally graded GTR membrane for periodontal regeneration
Qasim, S. B., Najeeb, S., Delaine-Smith, R. M., Rawlinson, A. & Ur Rehman, I., 1/01/2017, In: Dental Materials. 33, 1, p. 71-83 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Condition monitoring of wind turbines based on extreme learning machine
Qian, P., Ma, X. & Wang, Y., 12/09/2015, ICAC2015: Proceedings of the 21st International Conference on Automation and Computing. IEEE, p. 37-42 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An integrated data-driven model-based approach to condition monitoring of the wind turbine gearbox
Qian, P., Ma, X. & Cross, P., 12/07/2017, In: IET Renewable Power Generation. 11, 9, p. 1177-1185 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Reducing neutral-point voltage fluctuation in NPC three-level active power filters
Qian, P., Ma, X., Liu, G. & Chen, Z., 06/2018, In: Electrical Engineering. 100, 2, p. 721-732 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Estimating Health Condition of the Wind Turbine Drivetrain System
Qian, P., Ma, X. & Zhang, D., 12/10/2017, In: Energies. 2017, 10, 19 p., 1583.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
Data-driven model-based approaches to condition monitoring and improving power output of wind turbines
Qian, P., 2017, (Unpublished) Lancaster University. 183 p.
Research output: Thesis › Doctoral Thesis
Published
Data-driven condition monitoring approaches to improving power output of wind turbines
Qian, P., Ma, X., Zhang, D. & Wang, J., 1/08/2019, In: IEEE Transactions on Industrial Electronics. 66, 8, p. 6012 - 6020 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Preparation and characterization of bioactive composites and fibers for dental applications
Qidwai, M., Sheraz, M. A., Ahmed, S., Alkhuraif, A. A. & Ur Rehman, I., 2014, In: Dental Materials. 30, 10, p. e253-e263 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Thermo electroelastic solutions for surface bone remodeling under axial and transverse loads
Qin, Q. H., Qu, C. Y. & Ye, J. Q., 11/2005, In: Biomaterials. 26, 33, p. 6798-6810 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Thermoelectroelastic solutions for internal bone remodeling under axial and transverse loads
Qin, Q. H. & Ye, J. Q., 05/2004, In: International Journal of Solids and Structures. 41, 9-10, p. 2447-2460 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Toughening mechanisms in composite materials
Qin, Q. (Editor) & Ye, J. (Editor), 06/2015, Elsevier. 416 p. (Woodhead Publishing Series in Composites Science and Engineering)
Research output: Book/Report/Proceedings › Book
Published
Formation mechanism of tight coal-derived-gas reservoirs with medium-low abundance in Xujiahe Formation, central Sichuan Basin, China
Qin, S., Li, F., Li, W., Zhou, Z. & Zhou, G., 01/2018, In: Marine and Petroleum Geology. 89, 1, p. 144-154 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
UNDERSTANDING THE SELF‐RECONFIGURATION PROPERTIES OF A NOVEL SPINEL‐TYPE HIGH‐ENTROPY CATALYST
Qin, C., Wang, C., Liao, M., Du, Y., Gao, J. & Wu, Y., 11/11/2024, In: ChemCatChem. 16, 21, e202400971.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Auto-generation methodology of complex-shaped coarse aggregate set of 3D concrete numerical test specimen
Qiu, W., Fu, S. & Ye, J., 30/08/2019, In: Construction and Building Materials. 217, p. 612-625 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Meso-scale modelling of the thermo-mechanical response for concrete with complex-shaped aggregates in early age
Qiu, W., Fu, S., Zhu, J. & Ye, J., 14/03/2022, In: Construction and Building Materials. 323, 17 p., 126485.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Meso-scale computational modeling of the fracture of concrete with complex shaped aggregates under the self-restraint stress
Qiu, W., Ueda, T., Fu, S., Han, Y., Wang, J. & Ye, J., 1/01/2023, In: Composite Structures. 303, 21 p., 116267.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modeling driver steering control based on stochastic model predictive control
Qu, T., Chen, H., Ji, Y., Guo, H. & Cao, D., 10/2013, p. 3704-3709. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Reagent and power consumption of in-situ waterborne pollution monitoring systems
Quane, N., Moore, B. & Cheneler, D., 3/07/2017.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Resource management in microreactors - a computational study
Quane, N., Moore, B. & Cheneler, D., 3/07/2019.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Optimised self-calibrating microfluidic systems towards design optimisation
Quane, N., 24/04/2022, Lancaster University. 182 p.
Research output: Thesis › Doctoral Thesis
Published
Assessing the energy potential of modernizing the European hydropower fleet
Quaranta, E., Aggidis, G., Boes, R., Comoglio, C., De Michele, C., Ritesh Patro , E., Georgievskaia, E., Harby, A., Kougias, I., Muntean, S., Pérez-Díaz , J., Romero–Gomez, P., Rosa-Clot, M., Schleiss, A., Vagnoni, E., Wirth, M. & Pistocchi, A., 15/10/2021, In: Energy Conversion and Management. 246, 15 p., 114655.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Preliminary investigation of multi-element profiles for a high-life variable pitch vertical-axis tidal stream device.
Quayle, S. D. & Aggidis, G. A., 2006, In: IMechE Conference Transactions. v. 10
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Integrating CFD and prototyping technologies in the investigation of multi-element profiles for a high-lift variable pitch vertical-axis tidal power generator
Quayle, S. & Rennie, A., 2007, In: International Journal of Agile Systems and Management. 2, 2, p. 222-236 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The influence of vegetation species and plant properties on runoff and soil erosion: results from a rainfall simulation study in south east Spain.
Quinton, J. N., Edwards, G. M. & Morgan, R. P. C., 09/1997, In: Soil Use and Management. 13, 3, p. 143-148 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The influence of profiled sheeting thickness and shear connector's position on strength and ductility of headed shear connector
Qureshi, J., Lam, D. & Ye, J., 05/2011, In: Engineering Structures. 33, 5, p. 1643-1656 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of shear connector spacing and layout on the shear connector capacity in composite beams
Qureshi, J., Lam, D. & Ye, J., 04/2011, In: Journal of Constructional Steel Research. 67, 4, p. 706-719 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Finite element modelling of shear connection behaviour in a push test using profiled sheeting
Qureshi, J., Lam, D. & Ye, J., 16/08/2010, Advances and Trends in Structural Engineering, Mechanics and Computation - Proceedings of the 4th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2010. CRC Press/Balkema, p. 679-682 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Behaviour of Headed Shear Stud in a Push Test using Profiled Steel Sheeting
Qureshi, J., Lam, D. & Ye, J., 2009, Steel Concrete Composite and Hybrid Structures. Lam, D. (ed.). Singapore: Research Publishing Services, p. 737-744 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Dairy-inspired coatings for bone implants from whey protein isolate-derived self-assembled fibrils
Rabe, R., Hempel, U., Martocq, L., Keppler, J. K., Aveyard, J. & Douglas, T., 3/08/2020, In: International Journal of Molecular Sciences. 21, 15, 7 p., 5544.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Significance enhancement in the conductivity of core shell nanocomposite electrolytes
Rafique, A., Raza, R., Akram, N., Ullah, M. K., Ali, A., Irshad, M., Siraj, K., Khan, M. A., Zhu, B. & Dawson, R. J., 6/10/2015, In: RSC Advances. 2015, 105, p. 86322-86329 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...43 44 45 46 47 48 49 50 ...66 Next

Research

School of Engineering

Quick Links

Connect With Us