Home > Research > School of Engineering > Publications & Outputs

Research

View graph of relations

School of Engineering

3701 - 3800 out of 6,455Page size: 100
RSS feed of this list
  1. 2013
  2. Published

    Reducible support effects in the gas phase hydrogenation of p-chloronitrobenzene over gold

    Wang, X., Perret, N., Delgado, J. J., Blanco, G., Chen, X., Olmos, C. M., Bernal, S. & Keane, M. A., 2013, In: Journal of Physical Chemistry C. 117, 2, p. 994-1005 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  3. Published

    Research on deploying technical functional analysis for additive manufacturing of a surgical device for intravitreal interventions

    Lupeanu, M., Brooks, H., Rennie, A. & Hill, D., 2013, In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 75, 1, p. 141-160 20 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    Scaled design and test of a coupler for micro-reentrant square-cavities for millimeter wave klystrons

    Paoloni, C., Mineo, M., Yin, H., Zhang, L., He, W., Robertson, C. W., Ronald, K., Phelps, A. D. R. & Cross, A. W., 2013, 14th IEEE International Vacuum Electronic Conference. IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  5. Published

    Scanning the strength of a test signal to monitor electrode degradation within bio-fluidic microsystems

    Al-Gayem, Q., Liu, H., Khan, H. & Richardson, A., 2013, On-Line Testing Symposium (IOLTS), 2013 IEEE 19th International. IEEE, p. 133-138 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  6. Published

    Scintillator based coded-aperture imaging for neutron detection

    Hayes, S. & Gamage, K., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  7. Published

    Selective gas phase hydrogenation of p-chloronitrobenzene over Pd catalysts: Role of the support

    Cardenas-Lizana, F., Hao, Y., Crespo-Quesada, M., Yuranov, I., Wang, X., Keane, M. A. & Kiwi-Minsker, L., 2013, In: ACS Catalysis. 3, 6, p. 1386-1396 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    Semiconductor-based THz plasmonic metamaterial

    Letizia, R., 2013, Millimeter Waves and THz Technology Workshop (UCMMT), 2013 6th UK, Europe, China. Piscataway, N.J.: IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  9. Published

    Simulink implementation of a mean value engine model for an internal combustion engine. Technical report, Lancaster University, UK.

    Titi, S., 2013, Lancaster: Lancaster University.

    Research output: Working paper

  10. Published

    Solubility of carbon dioxide in ammonium based CO2-induced ionic liquids

    Najdanovic-Visak, V., Nunes da Ponte, M., E. Zakrzewska, M., Afonso, C. A. M., A. Rosatella, A. & P. Simeonov, S., 2013, In: Fluid Phase Equilibria. 20 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. Published

    Some novel aspects of green process engineering

    Patel, D., Kellici, S. & Saha, B., 2013, In: Chimica Oggi/Chemistry Today.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  12. Published

    State dependent parameter model-based condition monitoring for wind turbines

    Cross, P. & Ma, X., 2013, Proceedings of the 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies (CM 2013 & MFPT 2013). BINDT, 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  13. Published

    Status of the CASCADE microwave cavity experiment

    Kalliokoski, M., Bailey, I., Williams, P., Woollett, N., Burt, G., Chattopadhyay, S., Dainton, J., Dexter, A., Goudket, P., Pattalwar, S. & Thakker, T., 2013, Proceedings of the 9th Patras Workshop on Axions, WIMPs and WISPs. Oberlack, U. & Sissol, P. (eds.). Hamburg: Verlag Deutsches Elektronen-Synchrotron, p. 35-38 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  14. Published

    Structural, mechanical, and biocompatibility analyses of a novel dental restorative nanocomposite

    Khan, A. S., Wong, F. S. L., McKay, I. J., Whiley, R. A. & Rehman, I. U., 2013, In: Journal of Applied Polymer Science. 127, 1, p. 439-447 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    Studies on tolfenamic acid-chitosan intermolecular interactions: Effect of pH, polymer concentration and molecular weight

    Ahmed, S., Sheraz, M. A. & Rehman, I. U., 2013, In: AAPS PharmSciTech. 14, 2, p. 870-879 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    Studying pharmaceutical tablet coating process with real-time terahertz in-line sensing

    Lin, H., May, R. K., Evans, M. J., Zhong, S., Warr, I., Gladden, L. F., Shen, Y. & Zeitler, J. A., 2013, Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), 2013 38th International Conference on. IEEE, 2 p. 6665640

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  17. Published

    Sub-cycle switching of a photonic bandstructure via ultrastrong light-matter coupling

    Ménard, J. M., Porer, M., Leitenstorfer, A., Huber, R., Degl'Innocenti, R., Zanotto, S., Biasiol, G., Sorba, L. & Tredicucci, A., 2013, 18th International Conference on Ultrafast Phenomena, UP 2012. EDP Sciences, Vol. 41. 3 p. 09009

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  18. Published

    Synthesis and characterizations of a fluoride-releasing dental restorative material

    Khan, A. S., Aamer, S., Chaudhry, A. A., Wong, F. S. L. & Rehman, I. U., 2013, In: Materials Science and Engineering: A. 33, 6, p. 3458-3464 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    Synthesis and in-vitro cytotoxicity analysis of microwave irradiated nano-apatites

    Nazir, R., Samad Khan, A., Ahmed, A., Ur-Rehman, A., Anwar Chaudhry, A., Ur Rehman, I. & Wong, F. S. L., 2013, In: Ceramics International. 39, 4, p. 4339-4347 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    System identification of metabotropic glutamate receptor dependent long–term depression

    Tambuyzer, T., Ahmed, T., Berckmans, D., Taylor, C. J., Balschun, D. & Aerts, J.-M., 2013, In: Neural Computation. 25, 3, p. 650-670 21 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  21. Published

    Tailoring dynamic recrystallization in Ni- and Fe-base high temperature alloys

    Rivera-Diaz-del-Castillo, P. & Galindo-Nava, E., 2013, Recrystallization and Grain Growth V. Vol. 753. p. 427-430 4 p. (Materials Science Forum; vol. 753).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  22. Published

    Tapered metallic photonic crystal slow wave structure for THz vacuum electron devices

    Letizia, R., Mineo, M. & Paoloni, C., 2013, Millimeter Waves and THz Technology Workshop (UCMMT), 2013 6th UK, Europe, China. Piscataway, N.J.: IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  23. Published

    Testing of pultruded GFRP materials and structures for civil engineering

    Turvey, G., 2013, Advanced Composites in Civil Engineering. 1st ed. Woodhead Publishing Limited, p. 440-508 69 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

  24. Published

    The metallisation of insulating substrates with nano-structured metal films of controllable pore dimension

    Bromley, M. A. & Boxall, C., 2013, In: Journal of Materials Chemistry A. 1, 20, p. 6152-6161 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    The nanoporous metallisation of polymer membranes through photocatalytically initiated electroless deposition

    Bromley, M. & Boxall, C., 2013, 6 ed. The Electrochemical Society. 10 p. (Processes at the Semiconductor Solution Interface; vol. 5)

    Research output: Book/Report/Proceedings › Proceedings

  26. Published

    Thermal analysis of THz double corrugated waveguide

    Mohan, S. & Paoloni, C., 2013, 2013 6th UK, Europe, China Millimeter Waves and THz Technology Workshop (UCMMT). Piscataway, N.J.: IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  27. Published

    Towards rapid manufacture of externally gelated tissue analogues

    Kaklamani, G., Cheneler, D., Bowen, J., Anthony, C., Grover, L. & Adams, M., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Speech

  28. Published

    Ultimate loads, strengths, extensions and strains of pultruded GFRP single-lap, single-bolt tension joints

    Turvey, G., 2013, Proceedings of the International Conference on Advanced Composites in Construction 2013. p. 357-367 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  29. Published

    Vacuum tubes for Terahertz power generation

    Mineo, M. & Paoloni, C., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  30. Published

    Vibration-based delamination detection in a composite plate

    Ullah, I., Sinha, J. & Pinkerton, A., 2013, In: Mechanics of Advanced Materials and Structures. 20, 7, p. 536-551 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. 2012
  32. Published

    A dynamic model of the jump-to phenomenon during AFM analysis

    Bowen, J. & Cheneler, D., 18/12/2012, In: Langmuir. 28, 50, p. 17273-17286 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Unpublished

    Photography and Cloud Computing enabled Replication of Historic Artefacts for fabrication via Additive Manufacturing Technology

    Kaufman, J. & Rennie, A., 18/12/2012, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  34. Unpublished

    Production of fluid dynamically improved filters using additive manufacturing

    Vijayakumar, B., Rennie, A. & Burns, N., 18/12/2012, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  35. Published

    Modelling plastic deformation in BCC metals: Dynamic recovery and cell formation effects

    Galindo-Nava, E. I. & Rivera-Díaz-del-Castillo, P. E. J., 15/12/2012, In: Materials Science and Engineering: A. 558, p. 641-648 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    Thorium fuel has risks

    Ashley, S., Parks, G., Nuttall, B., Boxall, C. & Grimes, R., 5/12/2012, In: Nature. 492, 7427, p. 31-33 3 p.

    Research output: Contribution to Journal/Magazine › Comment/debate › peer-review

  37. Published

    Analysis of the four rod crab cavity for HL-LHC

    Hall, B., Ambattu, P. K., Burt, G., Dexter, A. C., Doherty, D., Lingwood, C., Calaga, R., Jensen, E., Rimmer, R., Wang, H., Gorelov, D., Grimm, T., Schnabel, E., Goudket, P., Hill, C. & McIntosh, P. A., 1/12/2012, IPAC 2012 - International Particle Accelerator Conference 2012. p. 2275-2277 3 p. (IPAC 2012 - International Particle Accelerator Conference 2012).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  38. Published

    Beta beams for precision measurements of neutrino oscillation parameters

    Wildner, E., Benedetto, E., Hansen, C., De Melo Mendonca, T., Stora, T., Damjanovic, S., Payet, J., Chancé, A., Zorin, V., Izotov, I., Rasin, S., Sidorov, A., Skalyga, V., De Angelis, G., Prete, G., Cinausero, M., Kravchuk, V., Gramegna, F., Marchi, T. & Collazuol, G. & 25 others, Mezzetto, M., Delbar, T., Loiselet, M., Keutgen, T., Mitrofanov, S., Burt, G., Dexter, A., Lamy, T., Latrasse, L., Marie-Jeanne, M., Sortais, P., Thuillier, T., Debray, F., Trophime, C., Hass, M., Hirsh, T., Berkovits, D., Stahl, A., Vardaci, E., De Nitto, A., Brondi, A., Rana, G. L., Moro, R., De Rosa, G. D. & Palladino, V., 1/12/2012, IPAC 2012 - International Particle Accelerator Conference 2012. p. 3939-3941 3 p. (IPAC 2012 - International Particle Accelerator Conference 2012).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  39. Published

    Photocatalytically driven dissolution of macroscopic metal surfaces. Part 1: Silver

    Wilbraham, R. J., Boxall, C. & Taylor, R. J., 1/12/2012, In: Journal of Photochemistry and Photobiology A: Chemistry. 249, p. 21-28 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    A NaI(Tl) scintillator for in situ environmental studies and laboratory detection measurements of aqueous potassium chloride

    Parker, A., Boxall, C., Joyce, M. & Schotanus, P., 12/2012, IEEE Nuclear Science Symposium and Medical Imaging Conference. IEEE, p. 38-43 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  41. Published

    Development of a Mixed Field Analyser for Real-Time Scintillator-Based Fast Neutron Measurements

    Joyce, M., Aspinall, M. & Cave, F., 12/2012, UK A01887 ed. UK: Department for Energy and Climate Change. 30 p.

    Research output: Book/Report/Proceedings › Commissioned report

  42. Published

    Modelling multiscale plasticity: A thermostatistical approach

    Galindo-Nava, E. I. & Rivera-Díaz-Del-Castillo, P. E. J., 12/2012, In: Scripta Materialia. 67, 11, p. 915-918 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Published

    Upscaling and its application in numerical simulation of long-term CO2 storage

    Akber Hassan, W. A. & Jiang, X., 12/2012, In: Greenhouse Gases: Science and Technology. 2, 6, p. 408–418 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  44. Published

    Ultrafast optical bleaching of intersubband cavity polaritons

    Zanotto, S., Degl'Innocenti, R., Xu, J. H., Sorba, L., Tredicucci, A. & Biasiol, G., 28/11/2012, In: Physical review B. 86, 20, 4 p., 201302.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  45. Published

    Analysis of unsteady flows past horizonatal axis wind turbine airfoils based on harmonic balance compressible Navier-Stokes equations with low-speed preconditioning

    Campobasso, S. & Baba-Ahmadi, M., 11/2012, In: Journal of Turbomachinery. 134, 6, p. 061020-1/061020-13 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  46. Published

    Combustion characteristics of H2/N2 and H2/CO syngas nonpremixed flames

    Ranga Dinesh, K. K. J., Jiang, X., Kirkpatrick, M. P. & Malalasekera, W., 11/2012, In: International Journal of Hydrogen Energy. 37, 21, p. 16186-16200 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  47. Published

    Improved Corrugation Cross-Sectional Shape in Terahertz Double Corrugated Waveguide

    Mineo, M. & Paoloni, C., 11/2012, In: IEEE Transactions on Electron Devices. 59, 11, p. 3116 -3119 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  48. Published

    Thermal conductivity and the isotope effect in Li2O

    Lu, H., Murphy, S. T., Rushton, M. J. D., Parfitt, D. C. & Grimes, R. W., 11/2012, In: Fusion Engineering and Design. 87, 11, p. 1834-1838 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  49. Published

    The magic door: smart interactions between students and lecturers using contactless technologies

    Nandwani, A., Crane, L., Edwards, R. & Benachour, P., 25/10/2012, mLearn 2012 Mobile and Contextual Learning Proceedings of the 11th International Conference on Mobile and Contextual Learning 2012. Specht, M., Sharples, M. & Multisilta, J. (eds.). CEUR Workshop Proceedings, Vol. 955. p. 252-255 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  50. Published

    A novel concept to develop composite structures with isotropic negative Poisson's ratio: effects of random inclusions

    Hou, X., Hu, H. & Silberschmidt, V., 12/10/2012, In: Composites Science and Technology. 72, 15, p. 1848–1854 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  51. Published

    A DXDR large deflection analysis of uniformly loaded square, circular and elliptical orthotropic plates using non-uniform rectangular finite-differences

    Kadkhodayan, M., Alamatian, J., Turvey, G. & Erfani Moghadam, A., 10/2012, In: Journal of Mechanical Science and Technology. 26, 10, p. 3231-3242 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  52. Published

    Functional analysis for the development of bio-medical products

    Lupeanu, M., Neagu, C., Opran, C. & Rennie, A., 10/2012, p. 330-336. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  53. Published

    Investigation of three-dimensional localisation of neutron sources using parallel axis imaging

    Gamage, K., Joyce, M. & Taylor, G., 10/2012, p. 600-605. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  54. Published

    Vectorially Combined Distributed Power Amplifiers for Software-Defined Radio Applications

    Narendra, K., Limiti, E., Paoloni, C., Collantes, J.-M., Jansen, R. & Yarman, S., 10/2012, In: IEEE Transactions on Microwave Theory and Techniques. 60, 10, p. 3189-3200 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  55. Published

    A method for the replacement of 137Cs with 40K for open-source ion exchange research applications in hot cells,

    Parker, A. J., Joyce, M. & Boxall, C., 27/09/2012.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  56. Published

    Terahertz confocal microscopy with a quantum cascade laser source

    De Cumis, U. S., Xu, J. H., Masini, L., Degl'Innocenti, R., Pingue, P., Beltram, F., Tredicucci, A., Vitiello, M. S., Benedetti, P. A., Beere, H. E. & Ritchie, D. A., 24/09/2012, In: Optics Express. 20, 20, p. 21924-21931 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  57. Published

    An experimental investigation of the tensile behaviour of single-lap bolted joints in pultruded GFRP plate

    Turvey, G. & Gode, J., 13/09/2012. 15 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  58. Published

    Vacuum tube amplifier of the opther Project for 1-THz amplification

    Di Carlo, A., Mineo, M., Paoloni, C., Durand, A. J., Krozer, V., Kotiranta, M., Bouamrane, F., Bouvet, T. & Megtert, S., 1/09/2012, Plasma Science (ICOPS), 2012 Abstracts IEEE International Conference on. IEEE, p. 7B-2 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  59. Published
    No renderer
  60. Published

    Accurate Backward-Wave Interaction Impedance Computation for Corrugated Rectangular Waveguides

    Paoloni, C., 09/2012, 5th UK/Europe-China Workshop on Millimeter Waves and Terahertz Technologies. China

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  61. Published

    Bio-hybrid tactile sensor for the study of the role of mechanoreceptors in human tactile perception

    Cheneler, D., Ward, M. & Anthony, C., 09/2012, In: Microelectronic Engineering. 97, p. 297-300 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  62. Published

    Direct e-beam lithography of PDMS

    Bowen, J., Cheneler, D. & Robinson, A., 09/2012, In: Microelectronic Engineering. 97, p. 34-37 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  63. Published

    Heterogeneous photocatalyzed degradation of a pesticide derivative, 3-chloro-4-methoxyaniline, in aqueous suspensions of titania

    Khan, A., Mir, N. A., Haque, M. M., Muneer, M., Vijayalakshmi, S. & Boxall, C., 09/2012, In: Research on Chemical Intermediates. 38, 7, p. 1323-1333 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  64. Published

    Investigations of the state-of-the-art methods for electromagnetic NDT and electrical condition monitoring

    Ma, X., 09/2012, In: Insight – Non-Destructive Testing and Condition Monitoring. 54, 9, p. 482-488 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  65. Published

    Laser clad corrosion protection for mild and harsh environments

    Mahmood, K., Stevens, N. & Pinkerton, A. J., 09/2012, In: Surface Engineering. 28, 8, p. 576-584 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  66. Published

    Narrow corrugated waveguide BWO for THz signal generation

    Mineo, M. & Paoloni, C., 09/2012, Plasma Science (ICOPS), 2012 Abstracts IEEE International Conference on. IEEE, p. 3P-2 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  67. Published

    Optimal sensor selection for wind turbine condition monitoring using multivariate principal component analysis approach

    Wang, Y., Ma, X. & Joyce, M., 09/2012. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  68. Published

    Photocatalytically Initiated Electroless Deposition of macroporous metal films onto insulating substrates

    Bromley, M. & Boxall, C., 09/2012, In: Electrochemistry Communications. 23, p. 87-89 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  69. Published

    Prediction of failure envelopes and stress–strain curves of fiber composite laminates under triaxial loads

    Ye, J. & Zhang, D., 09/2012, In: Journal of Composite Materials. 46, 19-20, p. 2417-2430 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  70. Published

    Compressible Navier-Stokes analysis of an oscillating wing in a power-extraction regime using efficient low-speed preconditioning

    Campobasso, S. & Drofelnik, J., 30/08/2012, In: Computers and Fluids. 67, p. 26-40 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  71. Published

    Esterification of acetic acid with n -hexanol in batch and continuous chromatographic reactors using a gelular ion-exchange resin as a catalyst

    Patel, D. & Saha, B., 29/08/2012, In: Industrial and Engineering Chemistry Research. 51, 37, p. 11965-11974 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  72. Published

    Fuel cells

    Sutherland, H. (Inventor), Lewis, G. (Inventor), Reynolds, C. (Inventor) & Dawson, R. (Inventor), 9/08/2012, Patent No. WO2012104599 (A1)

    Research output: Patent

  73. Published

    A comparison of collimator geometries for imaging mixed radiation fields with fast liquid organic scintillators

    Gamage, K., Joyce, M. & Taylor, G., 08/2012, In: IEEE Transactions on Nuclear Science. 59, 4, p. 1432-1437 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  74. Published

    Enzymatic Mineralization of Hydrogels for Bone Tissue Engineering by Incorporation of Alkaline Phosphatase

    Douglas, T. E. L., Messersmith, P. B., Chasan, S., Mikos, A. G., de Mulder, E. L. W., Dickson, G., Schaubroeck, D., Balcaen, L., Vanhaecke, F., Dubruel, P., Jansen, J. A. & Leeuwenburgh, S. C. G., 08/2012, In: Macromolecular Bioscience. 12, 8, p. 1077-1089 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  75. Published

    The Advancement of a Technique Using Principal Component Analysis for the Non-Intrusive Depth Profiling of Radioactive Contamination

    Adams, J., Joyce, M. & Mellor, M., 08/2012, In: IEEE Transactions on Nuclear Science. 59, 4, p. 1448-1452 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  76. Published

    Evolution of a neutron detector for the purpose of portability and resolvability

    Selwood, M. & Monk, S., 11/07/2012, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 680, p. 18-26 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  77. Published

    Three-Dimensional Water Vapor Visualization in Porous Packing by Near-Infrared Diffuse Transmittance Tomography

    Tsaoir, M. N. A., Fernandes, D. L. A., Sa, J., Kitagawa, K., Hardacre, C. & Aiouache, F., 4/07/2012, In: Industrial and Engineering Chemistry Research. 51, 26, p. 8875-8882 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  78. Published

    A digital approach to neutron-gamma imaging with a narrow tungsten collimator aperture and a fast organic liquid scintillator detector

    Gamage, K., Joyce, M. & Taylor, G., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1223-1227 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  79. Published

    An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs)

    Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2012, Dynamic methods and process advancements in mechanical, manufacturing, and materials engineering. Davim, J. P. (ed.). Hershey, Penn.: IGI Global, p. 73-90 18 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  80. Published

    Depth profiling 137Cs and 60Co non-intrusively for a suite of industrial shielding materials and at depths beyond 50mm

    Adams, J., Joyce, M. & Mellor, M., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1150–1153 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  81. Published

    Design for Manufacture using Functional Analysis and CAD Mould Simulation for Rapid Prototyping and Rapid Tooling: Paper: ESDA2012-82410

    Lupeanu, M., Brooks, H., Rennie, A., Celik, K., Neagu, C. & Akinci, I., 07/2012, ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2012): Proceedings of the . Nantes: American Society of Mechanical Engineers (ASME), 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  82. Published

    Development of a portable isotropic neutron spectrometer

    Selwood, M. J. & Monk, S. D., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1145-1149 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  83. Published

    Development of fusion blanket technology for the DEMO reactor

    Colling, B. R. & Monk, S. D., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1370-1372 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  84. Published

    Generic model of a community-based microgrid integrating wind turbines and photovoltaics

    Ma, X., Qin, J. & Wang, Y., 07/2012, p. 3147-3153. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  85. Published

    Non-Linear Stress Analysis for the Bolt Connections of A Chisel Tine Using Finite Element Method

    Celik, K., Rennie, A. & Akinci, I., 07/2012, International Conference of Agricultural Engineering (CIGR-AgEng 2012): Proceedings of the . 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  86. Published

    Proposal to characterise legacy Sellafield ponds using SONAR and RadLine™

    Jackson, S., Monk, S., Nye, D., Colling, B. & Stanley, S., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1162-1165 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  87. Published

    Tidal range turbines and generation on the Solway Firth

    Aggidis, G. & Feather, O., 07/2012, In: Renewable Energy. 43 , p. 9-17 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  88. Published

    Variation in measured neutron fluence in low radiation environments when altering sensor density on the surface of a sphere

    Monk, S. D., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1288-1290 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  89. Published

    Fuel cell module support

    Barnard, P. (Inventor), Harrington, M. (Inventor), Dawson, R. (Inventor) & Sharp, C. (Inventor), 25/06/2012, IPC No. H01M8/24, Patent No. EP2131438 (B1)

    Research output: Patent

  90. Published

    Trihexyl(tetradecyl)phosphonium bromide: liquid density, surface tension and solubility of carbondioxide

    Manic, M. S., Macedo, E. A. & Najdanovic, V., 25/06/2012, In: Fluid Phase Equilibria. 324, p. 8-12 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  91. Published

    Failure of single-lap single-bolt tension joints in pultruded glass fibre reinforced plate

    Turvey, G., 13/06/2012. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  92. Published

    A thermodynamic theory for dislocation cell formation and misorientation in metals

    Galindo-Nava, E. I. & Rivera-Díaz-Del-Castillo, P. E. J., 06/2012, In: Acta Materialia. 60, 11, p. 4370-4378 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  93. Published

    Function Based Design for Rapid Prototyping: A Medical Industry Application for an Ocular Speculum

    Lupeanu, M., Brooks, H., Rennie, A., Hill, D. & Neagu, C., 06/2012, 13th Rapid Design, Prototyping & Manufacturing Conference: Proceedings of the . Bocking, C. & Rennie, A. (eds.). High Wycombe: CRDM Ltd, p. 45-53 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  94. Published

    Laser surface modification using Inconel 617 machining swarf as coating material

    Mahmood, K., Stevens, N. & Pinkerton, A. J., 06/2012, In: Journal of Materials Processing Technology. 212, 6, p. 1271-1280 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  95. Published

    Rapid Design, Prototyping and Manufacturing: Proceedings of the Thirteenth Conference on

    Bocking, C. E. (Editor) & Rennie, A. (Editor), 06/2012, High Wycombe: CRDM Ltd. 109 p.

    Research output: Book/Report/Proceedings › Proceedings

  96. Published

    Stress analysis of a sample marine crane’s boom under static loading condition

    Celik, K., Caglayan, N., Cinar, R., Ucar, M., Ersoy, H. & Rennie, A., 06/2012, 5th International Mechanical Engineering Forum 2012: Proceedings of the . Prague, Czech Republic, p. 246-256 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  97. Published

    A remote condition monitoring system for wind-turbine based DG systems

    Ma, X., Wang, G., Cross, P. & Zhang, X., 31/05/2012, In: Journal of Physics: Conference Series. 364, 1, 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  98. Published

    A thermostatistical theory of low and high temperature deformation in metals

    Galindo-Nava, E. I. & Rivera-Díaz-del-Castillo, P. E. J., 1/05/2012, In: Materials Science and Engineering: A. 543, p. 110-116 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  99. Published

    Computerised curve deconvolution of TL/OSL curves using a popular spreadsheet program

    Afouxenidis, D., Polymeris, G. S., Tsirliganis, N. C. & Kitis, G., 1/05/2012, In: Radiation Protection Dosimetry. 149, 4, p. 363-370 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  100. Published

    Transient distributions of composition and temperature in a gas-solid packed bed reactor by near-infrared tomography

    tSaoir, M. N. A., Abreu Fernandes, D. L., McMaster, M., Kitagawa, K., Hardacre, C. & Aiouache, F., 1/05/2012, In: Chemical Engineering Journal. 189-190, p. 383-392 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  101. Published

    A study of computational mechanics of 3D spacer fabric: factors affecting its compression deformation

    Hou, X., Hu, H. & Silberschmidt, V., 05/2012, In: Journal of Materials Science. 47, 9, p. 3989–3999 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  102. Published

    Application of Response Surface Methodology to Improve Carotene Production from Synthetic Medium by Blakeslea trispora in Submerged Fermentation

    Filotheou, A., Nanou, K., Papaioannou, E., Roukas, T., Kotzekidou, P. & Liakopoulou-Kyriakides, M., 05/2012, In: Food and Bioprocess Technology. 5, 4, p. 1189-1196 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...34 35 36 37 38 39 40 41 ...65 Next

Back to top