Home > Research > Publications & Outputs >

Research

« Back

Find by keywords:

Engineering

51 - 100 out of 704Page size: 50
  1. Published

    A BIOMECHANICAL COMPARISON OF DIFFERENT SCREW CONFIGURATIONS IN DISTAL TIBIAL LOCKING PLATES

    Bonner, T. J., Green, S. M. & McMurty, I. A., 1/04/2012, In: Journal of Bone and Joint Surgery, British Volume. 94-B, SUPP XXXV, p. 20 1 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  2. Published

    Backward wave mode interaction impedance at THz frequencies for corrugated waveguide

    Mineo, M. & Paoloni, C., 04/2012, In: Microwave and Optical Technology Letters. 54, 4, p. 837-839 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  3. Published

    Design procedure for THz cascade backward wave amplifiers

    Mineo, M., Paoloni, C. & Durand, A. J., 04/2012, Vacuum Electronics Conference (IVEC), 2012 IEEE Thirteenth International. USA: IEEE, p. 235-236 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  4. Published

    Micro Reentrant Cavity for 100GHz Klystron

    Mineo, M. & Paoloni, C., 04/2012, Vacuum Electronics Conference (IVEC), 2012 IEEE Thirteenth International. IEEE, p. 65-66 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  5. Published

    Modelling and validation of off-road vehicle ride dynamics

    Pazooki, A., Rakheja, S. & Cao, D., 04/2012, In: Mechanical Systems and Signal Processing. 28, p. 679-695 17 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    The nanoporous metallisation of insulating substrates through Photocatalytically Initiated Electroless Deposition (PIED)

    Bromley, M. & Boxall, C., 22/03/2012, In: MRS Online Proceedings Library. 1409, 6 p., mrsf11-1409-cc05-20.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Photon radiation testing of commercially available off-the-shelf microcontroller devices

    Bandala, M. & Joyce, M., 10/03/2012, In: IEICE Electronics Express. 9, 5, p. 397-402 6 p.

    Research output: Contribution to Journal/Magazine › Letter › peer-review

  8. Published

    Phase space analysis of multipactor saturation in rectangular waveguide

    Lingwood, C., Burt, G., Dexter, A., Goudket, P., Smith, J. & Stoltz, P., 9/03/2012, In: Physics of Plasmas. 19, 3, 9 p., 032106.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    Novel early warning fault detection for wind-turbine-based DG systems

    Ma, X., 5/03/2012, Proceedings of 2011 2nd IEEE PES International Conference and Exhibition on Innovative Smart Grid Technologies (ISGT Europe): 5-7 Dec. 2011, Manchester, UK. IEEE, p. 1-6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  10. Published

    Numerical simulation of hydrogen impinging jet flame using flamelet generated manifold reduction

    Dinesh, K. K. J. R., Jiang, X. & van Oijen, J. A., 03/2012, In: International Journal of Hydrogen Energy. 37, 5, p. 4502-4515 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. Published

    Physical Analysis of Maximum Strength of Additive Manufactured Parts: A Case-Based Study

    Hambali, R. H., Rennie, A. & McGovern, J., 03/2012, 2nd International Conference on Arts, Social Sciences & Technology: Proceedings of the . Penang, Malaysia, 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  12. Published

    Semiconductor photocatalysis and metal deposition

    Bromley, M. & Boxall, C., 03/2012, Advances in Chemistry Research. Taylor, J. C. (ed.). Nova Science Publishers, Vol. 13.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  13. Published

    Comparison of cement pressurisation in flanged and unflanged acetabular cups

    Bhattacharya, R., Attar, F. G., Green, S. & Port, A., 3/02/2012, In: Journal of Orthopaedic Surgery and Research. 7, 1, 5 p., 5.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    Optimisation of Build Orientation for FDM Additive Manufactured Products

    Hambali, R. H., Vaudelin, M. & Rennie, A., 02/2012, International Conference on Applications and Design in Mechanical Engineering (ICADME 2012): Proceedings of the . Perlis, Malaysia: School of Mechatronic Engineering, UniMAP, 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  15. Published

    A Novel Receive-Only Liquid Nitrogen ( LN2 )-Cooled RF Coil for High-Resolution In Vivo Imaging on a 3-Tesla Whole-Body Scanner

    Hu, B., Varma, G., Schaeffter, T., Keevil, S. F. & Glover, P., 01/2012, In: IEEE Transactions on Instrumentation and Measurement. 61, 1, p. 129-139 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    A comparison of laser additive manufacturing using gas and plasma-atomized Ti-6A1-4V powders

    Ahsan, M. N., Pinkerton, A. J. & Ali, L., 2012, Innovative Developments in Virtual and Physical Prototyping. Bartolo, P., DeLemos, A., Tojeira, A., Pereira, A., Mateus, A., Mendes, A., DosSantos, C., Freitas, D., Bartolo, H., Almeida, H., IM, D., Dias, J., Domingos, M., Alves, N., Pereira, R., Patricio, T. & Ferreira, T. (eds.). Boca Raton: CRC PRESS-TAYLOR & FRANCIS GROUP, p. 625-633 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  17. Published

    A GPGPU accelerated compressed sensing with tight wavelet frame transform technique for MR imaging reconstruction

    Hu, B., Ma, X., Joyce, M., Glover, P. & Naleem, B., 2012, Imaging Systems and Techniques (IST), 2012 IEEE International Conference on. IEEE, p. 121-125 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  18. Published

    A verified model of transient and residual stresses in laser direct metal deposition

    Vogel, M., Khan, M., Ibarra-Medina, J., Pinkerton, A. J., N'Dri, N. & Megahed, M., 2012, Proceedings of the 31st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper 304

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  19. Published

    Accurate analysis of plasmonic devices with a new Drude Critical Points MRTD method

    Letizia, R. & Pinto, D., 2012, In: IEEE Photonics Technology Letters. 24, 18, p. 1587-1590 4 p.

    Research output: Contribution to Journal/Magazine › Letter › peer-review

  20. Published

    Additive manufacturing technology and material selection for direct manufacture of products based on computer aided design geometric feature analysis

    Smith, P., Lupeanu, M. & Rennie, A., 2012, In: International Journal of Materials and Structural Integrity. 6, 2-4, p. 96-110 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  21. Published

    Analysis and simulation of the effects of melt pool flow during laser deposition of a multiphase material

    Khan, M., Vogel, M., Ibarra-Medina, J., Pinkerton, A. J., N'Dri, N. & Megahed, M., 2012, Proceedings of the 31st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper P133

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  22. Published

    Analysis of impinging wall effects on hydrogen non-premixed flame

    Dinesh, K. K. J. R., Jiang, X. & van Oijen, J. A., 2012, In: Combustion Science and Technology. 184, 9, p. 1244-1268 25 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  23. Published

    Characterization of weld bead geometry in fibre laser butt welding of mild steel sheets by means of statistical modelling

    Eghlio, R. M., Pinkerton, A. J. & Li, L., 2012, In: Lasers in Engineering. 22, 5-6, p. 281-298 18 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    Comparison of THz backward wave oscillators based on corrugated waveguides.

    Mineo, M. & Paoloni, C., 2012, In: Progress In Electromagnetics Research Letters. 30, p. 163-171 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    Determination of the effect of part orientation to the strength value on additive manufacturing FDM for end-use parts by physical testing and validation via three-dimensional finite element analysis

    Hambali, R. H., Smith, P. & Rennie, A., 2012, In: International Journal of Materials Engineering Innovation. 3, 3-4, p. 269-281 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  26. Published

    Double Negative Metamaterial Inclusions in Photonic Crystal Based Resonant Cavities

    Letizia, R. & Pinto, D., 2012. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  27. Published

    Fabrication and Characterisation of the First Graphene Ring Micro Electrodes (GRIMEs)

    Dickinson, J., Andrieux, F. & Boxall, C., 2012, In: MRS Online Proceedings Library. 1407, 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  28. Published

    Fixed Contamination on Steel Surfaces: First Use of Quartz Crystal Microgravimetry to Measure Oxide Growth on Process Steels Under Conditions Typical of Nuclear Reprocessing

    Boxall, C., Woodhouse, B. & Wilbraham, R., 2012, In: MRS Online Proceedings Library. 1383, 6 p., mrsf11-1383-a07-04.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Guest Editorial: The 36th MATADOR Conference 2010

    Pinkerton, A. J., 2012, In: Materials and Manufacturing Processes. 27, 4, p. 363-363 1 p.

    Research output: Contribution to Journal/Magazine › Editorial › peer-review

  30. Published

    Hydrolysis of Hydroxamic Acid Complexants in the Presence of Non-Oxidizing Metal Ions

    Boxall, C., Andrieux, F., Edwards, S., Taylor, R. J. & Woodhead, D., 2012, In: MRS Online Proceedings Library. 1383, 6 p., mrsf11-1383-a07-02.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    Investigation of water adsorption on metal oxide surfaces under conditions representative of PuO2 storage containers

    Murphy, P., Boxall, C. & Taylor, R. J., 2012, In: MRS Online Proceedings Library. 1383, mrsf11-1383-a07-08.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    Linear and nonlinear non-minimal state space control system design.

    Taylor, C. J., Chotai, A. & Tych, W., 2012, System Identification, Environmental Modelling and Control System Design. Wang, L. & Garnier, H. (eds.). London: Springer, p. 559-582 24 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  33. Published

    Low-level joint control of a robotic manipulator using state-dependent parameter models

    Robertson, D. & Taylor, C. J., 2012. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  34. Published

    Multi-scale modeling of the progressive damage in cross-ply laminates under thermal and mechanical loading

    Yang, D., Sheng, Y. & Ye, J., 2012, In: IOP Conference Series: Materials Science and Engineering. 40, 1

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  35. Published

    Non–minimal state variable feedback decoupling control for multivariable continuous–time systems

    Taylor, J., Chotai, A. & Cross, P., 2012, In: International Journal of Control. 85, 6, p. 722-734 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    Photoassisted Degradation of a Herbicide Derivative, Dinoseb, in Aqueous Suspension of Titania

    Mir, N. A., Haque, M. M., Khan, A., Muneer, M. & Boxall, C., 2012, In: Scientific World Journal. 2012, p. - 8 p., 251527.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    Photo-induced changes in the Langmuir adsorption constants of metal oxide layers in self-cleaning cation sensors.

    Foran, P. & Boxall, C., 2012, In: MRS Online Proceedings Library. 1406, 6 p., mrsf11-1406-z18-12.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Published

    Practical experience with unified discrete and continuous–time, multi–input identification for control system design

    Taylor, C. J., Young, P. & Cross, P., 2012, 16th IFAC Symposium on System Identification. Kinnaert, M. (ed.). Brussels: IFAC, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper

  39. Published

    Real-time digital pulse-shape discrimination in non-hazardous fast liquid scintillation detectors: prospects for safety and security

    Joyce, M., Aspinall, M., Cave, F. & Lavietes, A., 2012, In: IEEE Transactions on Nuclear Science. 59, 4, p. 1245-1251 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    Recent developments in the CAPTAIN Toolbox for Matlab

    Young, P. & Taylor, C. J., 2012, 16th IFAC Symposium on System Identification . Kinnaert, M. (ed.). Brussels: IFAC, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper

  41. Published

    SSpace: A flexible and general state space toolbox for MATLAB.

    Taylor, C. J. & Pedregal, D. J., 2012, System Identification, Environmental Modelling and Control System Design. Wang, L. & Garnier, H. (eds.). London: Springer, p. 615-636 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  42. Published

    State-dependent control of a hydraulically-actuated nuclear decommissioning robot

    Robertson, D. & Taylor, C. J., 2012. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  43. Published

    State-dependent system identification for control of a hydraulically-actuated nuclear decommissioning robot

    Robertson, D., Taylor, C. J. & Lokuciewski, C., 2012, 16th IFAC Symposium on System Identification. Kinnaert, M. (ed.). Brussels: IFAC, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper

  44. Published

    Static shape control using piezoelectric actuator

    Bhagate, K., Ye, J. & Singh, A., 2012, Proceedings of the International Conference on Mechanics of Nano, Micro and Macro Compsite Structures: Politecnico di Torino, 19-20 June 2012. Ferreira, A. J. M. & Carrera, E. (eds.). 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  45. Published

    Surface Decontamination by Photocatalysis

    Boxall, C., Wilbraham, R., Taylor, R. J. & Woodbury, S., 2012, In: MRS Online Proceedings Library. 1383, 7 p., mrsf11-1383-a07-07.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  46. Published

    The impact of hybrid and electric powertrains on vehicle dynamics, control systems and energy regeneration

    Crolla, D. & Cao, D., 2012, In: Vehicle System Dynamics. 50, Supp. 1, p. 95-109 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  47. Published

    The Theta model: an essential forecasting tool for supply chain planning

    Nikolopoulos, K., Assimakopoulos, V., Bougioukos, N., Litsa, A. & Petropoulos, F., 2012, Advances in automation and robotics, Vol. 2: Selected Papers from the 2011 International Conference on Automation and Robotics (ICAR 2011), Dubai, December 1–2, 2011. Lee, G. (ed.). Berlin: Springer Verlag, Vol. 2. p. 431-437 7 p. (Lecture Notes in Electrical Engineering; vol. 123).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  48. Published
    No renderer
  49. Published

    Analysis and control of wakefields in X-band crab cavities for Compact Linear Collider

    Ambattu, P. K., Burt, G., Khan, V., Jones, R. M., Dexter, A. C. & Dolgashev, V., 21/11/2011, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 657, 1, p. 27-37 11 p.

    Research output: Contribution to Journal/Magazine › Journal article

  50. Published

    Beam dynamics simulations of the CLIC crab cavity and implications on the BDS

    Shinton, I. R. R., Burt, G., Glasman, C. J., Jones, R. M. & Wolski, A., 21/11/2011, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 657, 1, p. 126-130 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 3 4 5 6 7 8 ...15 Next

Back to top