Home > Research > Publications & Outputs >

Research

« Back

Find by keywords:

Engineering

351 - 400 out of 704Page size: 50
  1. Published

    High performance 1.5W pHEMT distributed power amplifier with adjustable inter-stage cascaded network for 10 divided by 2000 MHz

    Narendra, K., Paoloni, C., Limiti, E. & Collantes, J. M., 2008, PROCEEDINGS OF THE 14TH CONFERENCE ON MICROWAVE TECHNIQUES: COMITE 2008. Sistek, J., Novotna, K., Pourova, M., Cifra, L. & Visek, L. (eds.). PRAHA 6: CZECHSLOVAKIA SECTION IEEE, p. 293-296 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  2. Published

    Initiation and propagation of transverse cracking in composite laminates

    Ye, J. & Zhang, D., 2008, Third International Conference on Engineering Failure Analysis, ICEFA-III, Barcelona. Elsevier

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  3. Published

    Nonlinear finite-volume time-domain analysis of photonic crystal-based resonant cavities

    Pinto, D. & Obayya, S., 2008, In: IET Optoelectronics. 2, 6, p. 254-261 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    Novel Time Domain Technique for Photonic Bandgap Resonant Cavities

    Pinto, D. & Obayya, S., 2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  5. Published

    Phase and Amplitude Control of Dipole Crabbing Modes in Multi-Cell Cavities

    Dexter, A. & Burt, G., 2008, p. 1-104. 104 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  6. Published

    Phase Locked Loop Test Methodology

    Richardson, A. & Burbidge, M., 2008, Test and Diagnosis of Analogue, Mixed-signal and RF Integrated Circuits. Sun, Y. (ed.). Stevenage: IET Press, p. 277-306 30 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  7. Published

    Rapid calculation of the properties of klystron cavities

    Carter, R. G., Lingwood, C. & Feng, J., 2008, IVEC 2008. IEEE International Vacuum Electronics Conference, 2008.. IEEE, p. 142-143 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Other chapter contribution

  8. Published

    Single mode fibre laser welding of dissimilar aerospace alloys

    Chen, H-C., Pinkerton, A. J. & Li, L., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 505-510 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  9. Published

    Structural and Stress Analysis: theories, Tutorial and Examples

    Ye, J., 2008, UK: Spon Press (Taylor and Francis). 217 p.

    Research output: Book/Report/Proceedings › Book

  10. Published

    SWS improved analysis based on inhomogeneous dielectric loading

    Aloisio, M. & Paoloni, C., 2008, 2008 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, p. 298-299 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  11. Published

    Test of A/D Converters

    Richardson, A. & Lechner, A., 2008, Test & Diagnostics of Analogue, Mixed Signal & RF Integrated Circuits. Sun, Y. (ed.). Stevenage: IET Press, p. 213-234 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  12. Published

    Three dimensional analytical and finite element methods for simulating a moving melt pool with mass addition

    Pinkerton, A. J., Kamara, A. M., Shah, K., Safdar, S. & Li, L., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 369-374 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  13. Published

    Free-edge and ply cracking effect in angle-ply laminated composites subjected to in-plane loads

    Zhang, D., Ye, J. & Lam, D., 12/2007, In: Journal of Engineering Mechanics. 133, 12, p. 1268-1277 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    Theoretical analysis of the coincident wire-powder laser deposition process

    Pinkerton, A. J., Syed, W. U. H. & Li, L., 12/2007, In: Journal of Manufacturing Science and Engineering. 129, 6, p. 1019-1027 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    Three-dimensional finite strip analysis of laminated panels

    Attallah, K. M. Z., Ye, J. Q. & Sheng, H. Y., 12/2007, In: Computers and Structures. 85, 23-24, p. 1769-1781 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    Teaching embedded programming through mobile games development in Symbian.

    Edwards, R. & Coulton, P., 10/2007, In: International Journal of Electrical Engineering Education. 44, 4, p. 307-318 12 p.

    Research output: Contribution to Journal/Magazine › Journal article

  17. Published

    State space solution for thick laminated piezoelectric plates with clamped and electric open-circuited boundary conditions

    Sheng, H. Y., Wang, H. & Ye, J. Q., 09/2007, In: International Journal of Mechanical Sciences. 49, 7, p. 806-818 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    Properties degradation induced by transverse cracks in general symmetric laminates

    Zhang, D., Ye, J. & Lam, D., 15/08/2007, In: International Journal of Solids and Structures. 44, 17, p. 5499-5517 19 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    Single-step laser deposition of functionally graded coating by dual 'wire-powder' or 'powder-powder' feeding: a comparative study

    Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 31/07/2007, In: Applied Surface Science. 253, 19, p. 7926-7931 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    Characterisation of the geometrical and kinematical influences of a 5-axis machining cell on the quality of the laser structuring process

    Sandmann, S. & Quayle, S., 15/06/2007. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  21. Published

    Parametric study of semi-rigid composite connections with 3-D finite element approach

    Fu, F., Lam, D. & Ye, J., 06/2007, In: Engineering Structures. 29, 6, p. 888-898 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    Nucleation of CdTe thin films deposited by close-space sublimation under a nitrogen ambient

    Major, J. D., Proskuryakov, Y. Y., Durose, K. & Green, S., 31/05/2007, In: Thin Solid Films. 515, 15, p. 5828-5832 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  23. Published

    Coincident wire and powder deposition by laser to form compositionally graded material

    Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 21/05/2007, In: Surface and Coatings Technology. 201, 16-17, p. 7083-7091 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    Interfacial shear stress in FRP-plated RC beams under symmetric loads

    Yang, J., Ye, J. & Niu, Z., 05/2007, In: Cement and Concrete Composites. 29, 5, p. 421-432 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    Photoinduced "stick-slip" on superhydrophilic semiconductor surfaces

    Denison, K. R. & Boxall, C., 10/04/2007, In: Langmuir. 23, 8, p. 4358-4366 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  26. Published

    Biomechanical testing of the locking compression plate: When does the distance between bone and implant significantly reduce construct stability?

    Ahmad, M., Nanda, R., Bajwa, A. S., Candal-Couto, J., Green, S. & Hui, A. C., 03/2007, In: Injury. 38, 3, p. 358-364 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    Electrochemical Reactors for Metal Recovery from Aqueous Halide Electrolyte Solutions

    Cheng, C-Y., Dawson, R., Kelsall, G. & Robson, A., 25/02/2007, p. 349. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  28. Published

    Wear analysis of failed acetabular polyethylene: a comparison of analytical methods

    Chuter, G. S. J., Cloke, D. J., Mahomed, A., Partington, P. F. & Green, S. M., 02/2007, In: Journal of Bone and Joint Surgery, British Volume. 89B, 2, p. 273-279 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Recovery of platinum group metals from secondary materials. I. Palladium dissolution in iodide solutions

    Dawson, R. & Kelsall, G., 1/01/2007, In: Journal of Applied Electrochemistry. 37, 1, p. 3-14 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  30. Published

    Improved complex envelope alternative direction implicit finite difference time domain method for photonic bandgap cavities

    Pinto, D. & Obayya, S., 01/2007, In: Journal of Lightwave Technology. 25, 1, p. 440-447 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Unpublished

    Virtual Prototyping Phase III

    Rennie, A., 01/2007, (Unpublished) N/A. 54 p.

    Research output: Book/Report/Proceedings › Commissioned report

  32. Published

    A method and model for pulsed laser cleaning of rapid manufactured parts

    Pinkerton, A. J. & Li, K., 2007, Proceedings of the 21st International Conference on Surface Modification Technologies. Sudarshan, T. S. & Jeandin, M. (eds.). ASM International

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  33. Published

    A verified model of laser direct metal deposition using an analytical enthalpy balance method

    Pinkerton, A. J., Moat, R., Shah, K., Li, L., Preuss, M. & Withers, P. J., 2007, Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  34. Published

    A Wideband Conical Beam Cylindrical Dielectric Resonator Antenna

    Ambattu, P., Hamsakutty, V., Yohannan, J. & Mathew, KT., 2007, In: IEEE Antennas and Wireless Propagation Letters. 6, p. 15-17 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  35. Published

    An analytical model of beam attenuation and powder heating during coaxial laser direct metal deposition

    Pinkerton, A. J., 2007, In: Journal of Physics D: Applied Physics. 40, 23, p. 7323-7334 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    An anisotropic enhanced thermal conductivity approach for modelling laser melt pools

    Safdar, S., Pinkerton, A. J., Moat, R., Li, L., Sheikh, M. A., Preuss, M. & Withers, P. J., 2007, Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  37. Published

    Analytical computations, measurements and 3-D EM simulations for the calculation of cold parameters in helical SWSs

    Aloisio, M., Carter, R. & Paoloni, C., 2007, EIGHTH IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, ELECTRON DEVICES SOC & RELIABILITY GROUP, p. 413-414 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  38. Published

    Cement pressurisation in flanged and unflanged acetabular cups

    Green, S., Attar, F. G., Bhattacharya, R. & Port, A., 2007, Proceedings 8th EFORT Congress, Florence, Italy. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology, p. P486

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  39. Published

    Component repair using laser direct metal deposition

    Wang, W., Pinkerton, A. J., Wee, L. M. & Li, L., 2007, Proceedings of the 35th International MATADOR Conference. Hinduja, S. & Fan, KC. (eds.). London: Springer Verlag, p. 345-350 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  40. Published

    Effect of wind loading on low rise buildings using finite element modelling and computational fluid dynamics: A commercially focused appoach

    Taylor, S., Rennie, A. & McDonald, W., 2007, Virtual and Rapid Manufacturing: Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J. D. S. (ed.). London: Taylor & Francis Group, p. 811-816 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  41. Published

    Fixation strength of cemented Birmingham (HA coated, cementless) cups - a biomechanical study

    Green, S., Kadakia, A. & Partington, P. F., 2007, Proceedings 8th EFORT congress, Florence, Italy. European Federation of National Associations of Orthopaedics and Traumatology

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  42. Published

    From art to engineering

    O'Hana, S., Pinkerton, A. J. & Shoba, K., 2007, Proceedings of the 21st International Conference on Surface Modification Technologies. Sudarshan, T. S. & Jeandin, M. (eds.). ASM International

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  43. Published

    In vitro wear performance of MTP prostheses evaluated on a multi-station metatarso-phalangeal joint simulator

    Green, S., Joyce, T., Lee, S. & Unsworth, A., 2007, Proceedings 8th EFORT Congress. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology, p. F837

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  44. Published

    Innovative design of nano-vacuum triode

    Riccitelli, R., Brunetti, F., Petrolati, E., Paoloni, C., Di Carlo, A., Toschi, F., Terranova, M. L. & Cirillo, M., 2007, EIGHTH IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, ELECTRON DEVICES SOC & RELIABILITY GROUP, p. 323-324 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  45. Published

    Intragranular precipitation variations in laser deposited Waspaloy due to compositional inhomogeneities

    Moat, R. J., Karadge, M., Pinkerton, A. J., Deschamps, A., Bley, F., Li, L., Withers, P. J. & Preuss, M., 2007, Proceedings of the 136th TMS Annual Meeting. The Minerals, Metals & Materials Society (TMS), p. 77-86 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  46. Published

    Multiresolution Time Domain analysis of optical guided-wave devices

    Obayya, S. S. A. & Letizia, R., 2007, Computational Electromagnetics in Time-Domain, 2007. CEM-TD 2007. Workshop on. New York: IEEE, p. 80-83 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  47. Published

    New Alternating-Direction-Implicit Finite-Difference-Time-Domain Method for Photonic Crystal Devices

    Pinto, D. & Obayya, S., 2007. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  48. Published

    Stress distributions in multilayer laser deposited Waspaloy parts measured using neutron diffraction

    Moat, R. J., Pinkerton, A. J., Hughes, D. J., Li, L., Withers, P. J. & Preuss, M., 2007, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  49. Published

    Wear analysis of failed acetabular polyethylene: A comparison of analytical methods

    Green, S., Chuter, G. S. J., Cloke, D. J., Mohamed, A. & Partington, P. F., 2007, Proceedings 8th EFORT Congress, Florence. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  50. Unpublished

    The electrochemcial recovery of platinum and palladium from spent alumina supported catalysts

    Dawson, R., 1/12/2006, (Unpublished) University of London. 237 p.

    Research output: Thesis › Doctoral Thesis

Previous 1...4 5 6 7 8 9 10 11 ...15 Next

Back to top