School of Engineering

View graph of relations

Faculty of Science and Technology

Show 14 centres, groups and clusters

Hide 14 centres, groups and clusters

2401 - 2500 out of 6,515Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Author last name

Published
An overview of grid-connected fuel cell system for grid support
Guo, R., Li, Q. & Zhao, N., 30/11/2022, In: Energy Reports. 8, p. 884-892 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A combination of hybrid generator and battery system for frequency support
Guo, R., Schofield, N. & Zhao, N., 29/08/2022, 11th International Conference on Power Electronics, Machines and Drives (PEMD 2022). IEEE
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A Review of the Levelized Cost of Wave Energy Based on a Techno-Economic Model
Guo, C., Sheng, W., De Silva, D. G. & Aggidis, G., 22/02/2023, In: Energies. 16, 5, 2144.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
A Review of the Levelized Cost of Wave Energy Based on a Techno-Economic Model
Guo, C., Sheng, W., De Silva, D. & Aggidis, G., 22/06/2023, ISOPE 2023. ISOPE, p. 663-669 7 p. 471
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Understanding keyhole induced-porosities in laser powder bed fusion of aluminum and elimination strategy
Guo, L., Wang, H., Liu, H., Huang, Y., Wei, Q., Leung, C. L. A., Wu, Y. & Wang, H., 31/01/2023, In: International Journal of Machine Tools and Manufacture. 184, 103977.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Quantifying the effects of gap on the molten pool and porosity formation in laser butt welding
Guo, L., Wang, H., Liu, H., Huang, Y., Wei, Q., Leung, C. L. A., Wu, Y. & Wang, H., 1/08/2023, In: International Journal of Heat and Mass Transfer. 209, 124143.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Evaluation of hydrodynamic coefficients and sensitivity analysis of a work-class remotely operated vehicle using planar motion mechanism tests
Guo, R., Zan, Y., Luo, X., Ma, X., Xu, T., Han, D., Li, D. & Bai, X., 15/11/2024, In: Ocean Engineering. 312, 32 p., 119037.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Grid Integration of a Novel Linear-generator-based Wave Power Conversion System
Guo, R., Wu, Y., Ma, X., Aggidis, G. & Zhao, N., 4/10/2024.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Hybrid system consisting of synchronous condenser and virtual synchronous generator for enhanced power quality in microgrid
Guo, R. & Zhao, N., 10/02/2025, In: Electronics Letters. 61, 1, e70168.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Performance of polyethylene based radiation grafted anion exchange membrane with polystyrene-b-poly (ethylene/butylene)-b-polystyrene based ionomer using NiCo₂O₄catalyst for water electrolysis
Gupta, G., Scott, K. & Mamlouk, M., 31/01/2018, In: Journal of Power Sources. 375, p. 387-396 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Soluble Polystyrene-b-poly (ethylene/butylene)-b-polystyrene Based Ionomer for Anion Exchange Membrane Fuel Cells Operating at 70 °C
Gupta, G., Scott, K. & Mamlouk, M., 1/04/2018, In: Fuel Cells. 18, 2, p. 137-147 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A systematic study on the use of short circuiting for the improvement of proton exchange membrane fuel cell performance
Gupta, G., Wu, B., Mylius, S. & Offer, G. J., 16/02/2017, In: International Journal of Hydrogen Energy. 42, 7, p. 4320-4327 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Nafion-stabilised bimetallic Pt-Cr nanoparticles as electrocatalysts for proton exchange membrane fuel cells (PEMFCs)
Gupta, G., Sharma, S. & Mendes, P. M., 25/08/2016, In: RSC Advances. 6, p. 82635-82643 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pt Diffusion Dynamics for the Formation Cr–Pt Core–Shell Nanoparticles
Gupta, G., Iqbal, P., Yin, F., Liu, J., Palmer, R. E., Sharma, S., Leung, K. C.-F. & Mendes, P. M., 3/06/2015, In: Langmuir. 31, p. 6917–6923 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Corrosion and Oxidation Behavior of Zr58Cu22Fe4Co4Al12 Metallic Glass
Gupta, G., Kumar, M., Chattopadhyay, C. & Mondal, K., 1/12/2011, In: Trans Indian Inst Met. 64, p. 401–408 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
In situ nanocrystalline Fe–Si coating by mechanical alloying
Gupta, G., Mondal, K. & Balasubramaniam, R., 12/08/2009, In: Journal of Alloys and Compounds. 482, 1-2, p. 118-122 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The effects of morphology, microstructure and mixed-valent states of MnO₂ on the oxygen evolution reaction activity in alkaline anion exchange membrane water electrolysis
Gupta, G., Selvakumar, K., Lakshminarasimhan, N., Senthil Kumar, S. M. & Mamlouk, M., 15/06/2020, In: Journal of Power Sources. 461, 12 p., 228131.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Copper and copper selenide nanoparticles in the sol-gel matrices: structural and optical
Gurin, V. S., Alexeenko, A. A., Zolotovskaya, S. & Yumashev, K. V., 07/2006, In: Materials Science and Engineering: C . 26, 5-7, p. 952-955 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Structure and optical properties of CuxO- and CuxSe-doped sol–gel silica glasses
Gurin, V. S., Alexeenko, A. A., Yumashev, K. V., Prokoshin, P. V., Zolotovskaya, S. & Zhavnerko, G. A., 15/12/2003, In: Materials Science and Engineering: C . 23, 6-8, p. 1063-1067 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Simulation of high energy tail of electron distribution function
Gustavsson, B., Sergienko, T., Häggström, I., Honary, F. & Aso, T., 2004, In: Advances in Polar Upper Atmosphere Research. 18, p. 1-9 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
First tomographic estimate of volume distribution of HF-pump enhanced airglow emission
Gustavsson, B., Sergienko, T., Rietveld, M. T., Honary, F., Steen, A. A., Brändström, B. U. E., Leyser, T. B., Aruliah, A. L., Aso, T., Ejiri, M. & Marple, S., 12/2001, In: Journal of Geophysical Research. 106, A12, p. 29105-29123 19 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Power harvesting from human serum in buckypaper-based enzymatic biofuel cell
Güven, G., Şahin, S., Güven, A. & Yu, E. H., 16/02/2016, In: Frontiers in Energy Research. 4, 4.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
CuCo2O4 as Catalyst for Oxygen Evolution Reaction in Anion Exchange Membranes Water Electrolysis
Hadian Rasanani, E., Wang, X. & Gupta, G., 11/09/2024, p. 144.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Solution processed WO3 for electrochromic applications. Structure and properties
Hadjittoouli, N., Antoniou, G., Halcovitch, N. R., Milne, W. I. & Adamopoulos, G., 15/10/2018.
Research output: Contribution to conference - Without ISBN/ISSN › Speech
Published
Performance comparison of cross correlation and filled aperture imaging riometers
Hagfors, T., Grill, M. & Honary, F., 12/2003, In: Radio Science. 38, 6, p. 17/1-17/5
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Gold nanoparticle decorated single walled carbon nanotube nanocomposite with synergistic peroxidase like activity for d-alanine detection
Haider, W., Hayat, A., Raza, Y., Anwar Chaudhry, A., Rehman, I.-U. & Marty, J. L., 2015, In: RSC Advances. 5, 32, p. 24853-24858 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Kinetics of the pre-treatment of used cooking oil using Novozyme 435 for biodiesel production
Haigh, K. F., Vladisavljević, G. T., Reynolds, J. C., Nagy, Z. & Saha, B., 30/04/2014, In: Chemical Engineering Research and Design. 92, 4, p. 713-719 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparison of Novozyme 435 and Purolite D5081 as heterogeneous catalysts for the pretreatment of used cooking oil for biodiesel production
Haigh, K. F., Abidin, S. Z., Vladisavljević, G. T. & Saha, B., 30/09/2013, In: Fuel. 111, p. 186-193 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
In Situ Electrosynthesis of Peroxydicarbonate Anion in Ionic Liquid Media Using Carbon Dioxide/Superoxide System
Halilu, A., Hayyan, M., Aroua, M. K., Yusoff, R. & Hizaddin, H. F., 24/07/2019, In: ACS Applied Materials and Interfaces. 11, 29, p. 25928-25939 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Mechanistic insights into carbon dioxide utilization by superoxide ion generated electrochemically in ionic liquid electrolyte
Halilu, A., Hayyan, M., Aroua, M. K., Yusoff, R. & Hizaddin, H. F., 14/01/2021, In: Physical Chemistry Chemical Physics. 23, 2, p. 1114-1126 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Hybridized Fe/Ru-SiMWCNT-ionic liquid nanofluid for CO2conversion into carbamate using superoxide ion
Halilu, A., Hayyan, M., Aroua, M. K., Yusoff, R., Hizaddin, H. F. & Basirun, W. J., 31/08/2021, In: Journal of Environmental Chemical Engineering. 9, 4, 17 p., 105285.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Bifunctional Ionic Deep Eutectic Electrolytes for CO<sub>2</sub> Electroreduction
Halilu, A., Hadj-Kali, M. K., Hashim, M. A., Yusoff, R. & Aroua, M. K., 25/10/2022, In: ACS Omega. 7, 42, p. 37764-37773 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Designing the four rod crab cavity for the high-luminosity LHC upgrade
Hall, B., 2012, Lancaster University. 222 p.
Research output: Thesis › Doctoral Thesis
Published
Design and testing of a four rod crab cavity for High Luminosity LHC
Hall, B., Burt, G. C., Apsimon, R. J., Lingwood, C., Tutte, A., Grudiev, A., Macpherson, A., Navarro-Tapia, M., Calaga, R., Hernández-Chahín, K., Appleby, R. & Goudket, P., 3/01/2017, In: Physical Review Special Topics: Accelerators and Beams. 20, 1, 17 p., 012001.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Analysis of the four rod crab cavity for HL-LHC
Hall, B., Ambattu, P. K., Burt, G., Dexter, A. C., Doherty, D., Lingwood, C., Calaga, R., Jensen, E., Rimmer, R., Wang, H., Gorelov, D., Grimm, T., Schnabel, E., Goudket, P., Hill, C. & McIntosh, P. A., 1/12/2012, IPAC 2012 - International Particle Accelerator Conference 2012. p. 2275-2277 3 p. (IPAC 2012 - International Particle Accelerator Conference 2012).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The Impact of Control Structure and Constraints on the Performance of a Wave Energy Converter with a Hydraulic PTO System
Hall, C., Wu, Y., Sheng, W. & Aggidis, G., 22/06/2023, ISOPE-2023. ISOPE, p. 628-635 8 p. 456
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The impact of model predictive control structures and constraints on a wave energy converter with hydraulic power take off system
Hall, C., Sheng, W., Wu, Y. & Aggidis, G., 30/04/2024, In: Renewable Energy. 224, 120172.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The Impact of Wave Prediction Uncertainty on the Control of a Multi-Axis Wave Energy Converter
Hall, C., Wu, Y., Rizaev, I., Sheng, W., Dorrell, R. & Aggidis, G., 2/09/2023, p. 453-1 - 453-8. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
PTO Control Design for a Multi-Axis WEC Device
Hall, C., Sheng, W., Yavuz, H. & Aggidis, G., 17/06/2024, Proceedings of the Thirty-fourth (2024) International Ocean and Polar Engineering Conference. p. 641-648 8 p. 194-2024-TPC-0809
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The Impact of Linear and Nonlinear Control Structures on the Performance of a Wave Energy Converter
Hall, C. M., Wu, Y., Sheng, W. & Aggidis, G., 31/12/2024, In: International Journal of Offshore and Polar Engineering. 34, 4, p. 422-430 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The Impact of Wave Prediction Uncertainty on the Control of a Multi-Axis Wave Energy Converter
Hall, C., Wu, Y., Rizaev, I., Sheng, W., Dorrell, R. & Aggidis, G., 16/06/2025, In: International Marine Energy Journal. 8, 1, p. 65-72 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of build orientation on FDM parts: a case study for validation of deformation behaviour by FEA
Hambali, R. H., Celik, K., Smith, P., Rennie, A. & Ucar, M., 09/2010, International Conference on Design and Concurrent Engineering (iDECON 2010): Manufacturing Challenges Towards Global Sustainability. Penerbit Universiti (UTeM), p. 224-228 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Analysis of existing Additive manufacturing material selectors
Hambali, R. H. & Rennie, A., 06/2010. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Optimisation of Build Orientation for FDM Additive Manufactured Products
Hambali, R. H., Vaudelin, M. & Rennie, A., 02/2012, International Conference on Applications and Design in Mechanical Engineering (ICADME 2012): Proceedings of the . Perlis, Malaysia: School of Mechatronic Engineering, UniMAP, 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Physical Analysis of Maximum Strength of Additive Manufactured Parts: A Case-Based Study
Hambali, R. H., Rennie, A. & McGovern, J., 03/2012, 2nd International Conference on Arts, Social Sciences & Technology: Proceedings of the . Penang, Malaysia, 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Determination of the effect of part orientation to the strength value on additive manufacturing FDM for end-use parts by physical testing and validation via three-dimensional finite element analysis
Hambali, R. H., Smith, P. & Rennie, A., 2012, In: International Journal of Materials Engineering Innovation. 3, 3-4, p. 269-281 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Optimisation of build orientation for FDM additive manufactured products
Hambali, R. H., Vaudelin, M. & Rennie, A., 06/2011.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Analysis the Awkward Posture Ergonomic Risk and Workstation Improvement Simulation in Mechanical Assembly Manufacturing Industry using DelmiaV5
Hambali, R. H., Rahim, S. A. A., Azizan, N., Zali, Z., Akmal, S. & Zin, M. H., 31/12/2019, In: IOP Conference Series: Materials Science and Engineering. 705, 1, 6 p.
Research output: Contribution to Journal/Magazine › Conference article › peer-review
Published
Updated database, semi-empirical and theoretical calculation of Kβ/Kα intensity ratios for elements ranging from 11Na to 96Cm
Hamidani, A., Daoudi, S., Kahoul, A., Sampaio, J. M., Marques, J. P., Parente, F., Croft, S., Favalli, A., Kup Aylikci, N., Aylikci, V., Kasri, Y. & Meddouh, K., 31/01/2023, In: Atomic Data and Nuclear Data Tables. 149, 58 p., 101549.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A novel DGT-sediment trap device for the in-situ measurement of element remobilisation from settling particles in water columns and its application to trace metal release from Mn and Fe oxides.
Hamilton-Taylor, J., Smith, E. J., Davison, W. & Zhang, H., 1999, In: Limnology and Oceanography. 44, 7, p. 1772-1780 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Resolving and modeling the effects of Fe and Mn redox cycling on trace metal behaviour in a seasonally anoxic lake.
Hamilton-Taylor, J., Smith, E. J., Davison, W. & Sugiyama, M., 15/04/2005, In: Geochimica et Cosmochimica Acta. 69, 8, p. 1947-1960 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A mmWave Leaky-Wave Antenna for Efficiency Enhanced Near-Field Wireless Power Transfer and Communication
Han, S., Poveda-Garcia, M., Ding, Y., Goussetis, G. & Wang, L., 17/03/2024, 2024 18th European Conference on Antennas and Propagation (EuCAP).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Near-Field Focusing mmWave Leaky Wave Antenna for Enhanced Wireless Power Transfer
Han, S., Poveda-García, M., Song, C., Ding, Y., Goussetis, G. & Wang, L., 21/03/2024, 2023 IEEE 11th Asia-Pacific Conference on Antennas and Propagation, APCAP 2023 - Proceedings. Institute of Electrical and Electronics Engineers Inc., (2023 IEEE 11th Asia-Pacific Conference on Antennas and Propagation, APCAP 2023 - Proceedings).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A Nonlinear Wind Turbine Wake Expansion Model Considering Atmospheric Stability and Ground Effects
Han, X., Wang, T., Ma, X., Xu, C., Fu, S., Zhang, J., Xue, F. & Cheng, Z., 8/09/2024, In: Energies. 17, 24 p., 4503.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Machine learning of automatic hierarchical multi-label classification method for identifying metal failure mechanisms
Han, R., Liu, C.-B., Sun, W., Yu, S., Zheng, H. & Deng, L., 6/06/2025, In: Scientific Reports. 15, 1, 19904.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Study of the superdeformed band in ¹⁹⁴Pb and ¹⁹²Hg with EUROGAM
Hannachi, F., Schück, C., Bastin, G., Deloncle, I., Gall, B., Porquet, M., Smith, A., Azaiez, F., Bourgeois, C., Duprat, J., Korichi, A., Perrin, N., Poffé, N., Sergolle, H., Astier, A., Le Coz, Y., Meyer, M., Redon, N., Bentley, M. & Simpson, J. & 18 others, Sharpey-Schafer, J., Joyce, M., Beausang, C., Fallon, P., Paul, E., Dagnall, P., Forbes, S., Gale, S., Jones, P., Wadsworth, R., Clark, R., Aléonard, M., Curien, D., Defrance, G., Carpenter, M., Henry, R., Lauritsen, T. & Willsau, P., 1993, In: Nuclear Physics, Section A. 557, p. 75-82 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A high average-current electron source for the Jefferson Laboratory free electron laser
Hannon, F., 2008, Lancaster University. 225 p.
Research output: Thesis › Doctoral Thesis
Published
An Embedded Test & Health Monitoring Strategy for Detecting and Locating Faults in Aerospace Bus Systems.
Hannu, J., Koltsov, D., Xu, Z., Richardson, A. & Moilanen, M., 2008, In: Proceedings of the IEEE .
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Support effects in the gas phase hydrogenation of butyronitrile over palladium
Hao, Y., Wang, X., Perret, N., Cárdenas-Lizana, F. & Keane, M. A., 2015, In: Catalysis, Structure and Reactivity. 1, 1, p. 4-10 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Synthesis and characterization of grafted nanohydroxyapatites using functionalized surface agents
Haque, S., Rehman, I. & Darr, J. A., 2007, In: Langmuir. 23, 12, p. 6671-6676 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Potential for Chemistry in Multidisciplinary, Interdisciplinary, and Transdisciplinary Teaching Activities in Higher Education
Hardy, J., Sdepanian, S., Stowell, A., Aljohani, A., Allen, M., Anwar, A., Barton, D., Baum, J., Bird, D., Blaney, A., Brewster, L., Cheneler, D., Efremova, O., Entwistle, M., Esfahani, R., Firlak, M., Foito, A., Forciniti, L., Geissler, S. & Guo, F. & 19 others, Hathout, R., Jiang, R., Kevin, P., Leese, D., Low, W. L., Mayes, S., Mozafari, M., Murphy, S., Nguyen, H., Ntola, C., Okafo, G., Partington, A., Prescott, T., Price, S., Soliman, S., Sutar, P., Townsend, D., Trotter, P. & Wright, K., 4/03/2021, In: Journal of Chemical Education. 98, 4, p. 1124–1145 22 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Review of ceramic mold casting of metal-based materials via the Shaw process
Hardy, J., Cheneler, D., Heasman, P. & Dodd, A., 3/01/2023, engrxiv.
Research output: Other contribution
Published
Model–based prediction of nephropathia epidemica outbreaks based on climatologic and vegetation data and bank voles population dynamics
Haredasht, S. A., Taylor, C. J., Maes, P., Verstraeten, W. W., Clement, J., Barrios, M., Lagrou, K., Van Ranst, M., Coppin, P., Berckmans, D. & Aerts, J.-M., 2013, In: Zoonoses and Public Health. 60, 7, p. 462-477 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modelling seasonal and multi annual variation in bank vole populations and nephropathia epidemica
Haredasht, S. A., Taylor, C. J., Maes, P., Verstraeten, W. W., Clement, J., Van Ranst, M., Coppin, P., Berckmans, D. & Aerts, J.-M., 05/2014, In: Biosystems Engineering. 121, p. 25–37 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The background absorption at high latitudes
Harrich, M., Friedrich, M., Marple, S. R. & Torkar, K. M., 2003, In: Advances in Radio Science. 1, p. 325-327 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Analogue Fault Simulation Based on Layout-Dependent Fault Models.
Harvey, R., Richardson, A. M. D., Baker, K. & Bruls, E., 1994, Proceedings of the IEEE International Test Conference on TEST: The Next 25 Years. Washington, DC, USA: IEEE Computer Society, p. 641-649 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A review of testing methods for mixed signal ICs.
Harvey, R. J. A., Bratt, A. H. & Dorey, A. P., 1993, In: Microelectronics Journal. 24, 6, p. 663-674 12 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Test evaluation for complex mixed signal ICs by introducing layout dependent faults.
Harvey, R. J. A., Richardson, A. M. D., Bruls, E. M. J. & Baker, K., 1993, Proceedings of the IEE colloquium on mixed signal VLSI test, digest No 1993/240. London, p. 6/1-8
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The application of rapid manufacturing technologies in the spare parts industry
Hasan, S. & Rennie, A., 08/2008, Sild Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 584-590 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Virtual Trading System for Rapid Manufactured Products
Hasan, S. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 127-135 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
A Comprehensive Business Model for Rapid Manufactured Products
Hasan, S. & Rennie, A., 10/2008, 19th International Symposium of the Danube-Adria-Association-for-Automation-and-Manufacturing - Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions. Vienna: DAAAM International, p. 591-592 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The business model for the functional rapid manufacturing supply chain
Hasan, S., Rennie, A. & Hasan, J., 01/2014, In: Studia Commercialia Bratislavensia. 6, 24, p. 536-552 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Novel engineered high performance sugar beetroot 2D nanoplatelet-cementitious composites
Hasan, H., Huang, B., Saafi, M. B. S., Sun, J., Chi, Y., Eric Whale, Hepworth, D. & Ye, J., 30/03/2019, In: Construction and Building Materials. 202, p. 546-562 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Requirements for large-scale adoption of rapid manufacturing technologies
Hasan, S., Rennie, A., Hoque, M. R. & Ahmed, N., 24/05/2019, In: Cogent Business & Management. 6, 1, 22 p., 1623151.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Engineered novel multifunctional hybrid nanofiber reinforcement for improving the flexural strength and fracture of cementitious composites for sustainable concrete
Hasan, H., 2019, Lancaster University. 286 p.
Research output: Thesis › Doctoral Thesis
Published
Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges
Hasanov, S., Alkunte, S., Rajeshirke, M., Gupta, A., Huseynov, O., Fidan, I., Alifui-Segbaya, F. & Rennie, A., 27/12/2021, In: Journal of Manufacturing and Materials Processing. 6, 1, 32 p., 4.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Role of lattice strain in bifunctional catalysts for tandem furfural hydrogenation–esterification
Hashim, L. H., Halilu, A., Umar, Y. B., Johan, M. R. B., Aroua, M. K., Koley, P. & Bhargava, S. K., 20/12/2022, (E-pub ahead of print) In: Catalysis Science and Technology.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing
Hasib, H., Rennie, A., Burns, N. & Geekie, L., 11/2014, The Filtration Society 50th Anniversary International Conference and Exhibition: Proceedings of the . The Filtration Society, 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Design and fabrication of cranioplasty prostheses: fit evaluation between phantom-based haptic environment and Materialise 3-Matic Software
Hasib, H., Yahaya, S. H., Mohamad, A. K., Bani Hashim, A. Y., Ali Mokhtar, N. & Simha, S. S., 2013, In: Journal of Advanced Manufacturing Technology. 7, 1, p. 87-96 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental evaluation of mechanical properties of tin composite (tin, rice husk and silicon carbide) for sustainable production tooling
Hasib, H., Taufik, R. S., Mohd, N. F. A., Yahaya, S. H., Mohamad, A. K., Abdullah, Z., Ariff, H. & Hambali, R. H., 2014, In: Journal of Advanced Manufacturing Technology. 8, 2
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing
Hasib, H., Rennie, A., Burns, N. & Geekie, L., 12/2014, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Powder removal from Ti-6Al-4V cellular structures fabricated via electron beam melting
Hasib, H., Harrysson, O. L. A. & West, H. A., 03/2015, In: JOM Journal of the Minerals, Metals and Materials Society. 67, 3, p. 639-646 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing
Hasib, H., Rennie, A., Burns, N. & Geekie, L., 2015, In: Filtration. 15, 3, p. 174-180 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pressure drop and velocity simulations in non-stochastic lattice structure for filter applications fabricated using additive manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Simulation of flow characteristics for filters designed with a non-stochastic lattice structure fabricated via additive manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015, p. 153-158. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Pressure Drop and Velocity Simulations in Non-Stochastic Structures - Filters Fabricated by Additive Manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 04/2016, In: Filtration. 16, 2, p. 97-102 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Atomistic Simulation of Water Incorporation and Mobility in Bombyx mori Silk Fibroin
Haskew, M., Deacon, B., Yong, C., Hardy, J. & Murphy, S., 28/12/2021, In: ACS Omega. 6, 51, p. 35494-35504 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Computational and experimental study on silk fibroin and silk fibroin polymer electrolyte for application in transient energy storage devices
Haskew, M., 2022, Lancaster University. 160 p.
Research output: Thesis › Doctoral Thesis
Published
Mg/Zn metal-air primary batteries using silk fibroin-ionic liquid polymer electrolytes
Haskew, M., Nikman, S., O'Sullivan, C., Galeb, H., Halcovitch, N., Hardy, J. & Murphy, S., 31/01/2023, In: Nano Select. 4, 1, p. 90-101 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Biomimetic PLGA/Strontium-Zinc Nano Hydroxyapatite Composite Scaffolds for Bone Regeneration
Hassan, M., Sulaiman, M., Yuvaraju, P. D., Galiwango, E., Rehman, I. U., Al-Marzouqi, A. H., Khaleel, A. & Mohsin, S., 28/01/2022, In: Journal of Functional Biomaterials. 13, 1, e13.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Post pancreatectomy acute pancreatitis and effect on chemotherapy: Long term analysis
Hassan, A., Rashid, S., Lambert, J., Fleet, B. & Subar, D., 16/05/2024, In: HPB. 26, Suppl. 1, p. S376-S377 2 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
High-field transport and noise properties of sputter-deposited amorphous carbon-silicon heterojunctions
Hastas, N. A., Dimitriadis, C. A., Panayiotatos, Y., Tassis, D. H., Logothetidis, S., Papadimitriou, D., Roupakas, G. & Adamopoulos, G., 2002, In: Semiconductor Science and Technology. 17, 7, p. 662-667 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
CHARACTERISATION OF EGG WHITE-IMPREGNATED ACTIVATED CARBON FOR CO2 ADSORPTION APPLICATION
Hatta, N. S. M., Hussin, F., Gew, L. T. & Aroua, M. K., 31/07/2024, In: Malaysian Journal of Science. 43, p. 20-25 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Self-healing of deformation damage in underaged Al-Cu-Mg alloys
Hautakangas, S., Schut, H., van Dijk, N. H., Rivera Díaz del Castillo, P. E. J. & van der Zwaag, S., 05/2008, In: Scripta Materialia. 58, 9, p. 719-722 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Positron annihilation spectroscopy as a tool to develop self healing in aluminium alloys
Hautakangas, S., Schut, H., Van Der Zwaag, S., Del Castillo, P. E. J. R. D. & Van Dijk, N. H., 1/12/2007, In: Physica Status Solidi (C) Current Topics in Solid State Physics. 4, 10, p. 3469-3472 4 p.
Research output: Contribution to Journal/Magazine › Conference article › peer-review
Published
Digital approaches to field neutron spectrometry.
Hawkes, N., Akurugoda Gamage, K. A. & Taylor, G., 12/2010, In: Radiation Measurements. 45, 10, p. 1305-1308 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Digital approaches to neutron spectrometry
Hawkes, N., Gamage, K. & Taylor, G., 2009. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
HF Wire-Mesh Dipole Antennas for Broadband Ice-Penetrating Radar
Hawkins, J. D., Lok, L. B., Brennan, P. V. & Nicholls, K. W., 1/12/2020, In: IEEE Antennas and Wireless Propagation Letters. 19, 12, p. 2172 - 2176 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Monte Carlo study of scintillator-based coded-aperture neutron imaging
Hayes, S. & Gamage, K., 2013, p. 74.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Scintillator based coded-aperture imaging for neutron detection
Hayes, S. & Gamage, K., 2013.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

Previous 1...21 22 23 24 25 26 27 28 ...66 Next

Research

School of Engineering

Quick Links

Connect With Us