School of Engineering

View graph of relations

Faculty of Science and Technology

Show 14 centres, groups and clusters

Hide 14 centres, groups and clusters

1901 - 2000 out of 6,515Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Author last name

Published
Nuclear-driven production of renewable fuel additives from waste organics
Plant, A. G., Kos, B., Jazbec, A., Snoj, L., Najdanovic-Visak, V. & Joyce, M. J., 17/09/2021, In: Communications Chemistry. 4, 1, 132.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Radiation-directed production of chemical reagents and petroleum additives from waste organic feedstocks
Plant, A., 9/02/2023, Lancaster University. 255 p.
Research output: Thesis › Doctoral Thesis
Published
Nuclear Cogeneration of Methanol and Acetaldehyde from Ethylene Glycol Using Ionizing Radiation
Plant, A., Kos, B., Jazbec, A., Snoj, L., Joyce, M. & Najdanovic‐Visak, V., 13/12/2023, In: Industrial and Engineering Chemistry Research. 62, 49, p. 21152-21163 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A compact and efficient multi-mode antenna for parallel transmission of 7T magnetic resonance imaging
Pitman, S. & Hu, J., 11/2013, 2013 Loughborough Antennas & Propagation Conference. Loughborough, UK: IEEE, p. 534-538 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Optimisation studies for a high gradient proton Linac for application in proton imaging: ProBE: Proton Boosting Linac for imaging and therapy
Pitman, S., 27/09/2019, Lancaster University. 273 p.
Research output: Thesis › Doctoral Thesis
Published
Prediction of product morphology of lyophilized drugs in the case of Vacuum Induced Surface Freezing
Pisano, R. & Capozzi, L. C., 2/09/2017, In: Chemical Engineering Research and Design. 125, p. 119-129 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Achieving continuous manufacturing in lyophilization: Technologies and approaches
Pisano, R., Arsiccio, A., Capozzi, L. C. & Trout, B. L., 1/09/2019, In: European Journal of Pharmaceutics and Biopharmaceutics. 142, p. 265-279 15 p.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
Characterization of the mass transfer of lyophilized products based on X-ray micro-computed tomography images
Pisano, R., Barresi, A. A., Capozzi, L. C., Novajra, G., Oddone, I. & Vitale-Brovarone, C., 11/06/2017, In: Drying Technology. 35, 8, p. 933-938 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Drawbacks of Batch Processing, Current Status, and Perspectives
Pisano, R., Capozzi, L. C. & Corver, J. A., 24/10/2019, Continuous Manufacturing in Lyophilization of Pharmaceuticals. CRC Press ed. Routledge, 20 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Influence of the freezing protocol on the activity of lactate dehydrogenase after freeze-drying
Pisano, R., Napoletano, F., Paladini, A., De Beer, T. & Capozzi, L., 2017.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Continuous freeze-drying and its relevance to the pharma/biotech industry
Pisano, R., Capozzi, L. & Trout, B. L., 2017.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Evaluation of performance and operation viability of non-uniform potential solid oxide fuel cell fueled by reformed methane
Piroonlerkgul, P., Kiatkittipong, W., Wongsakulphasatch, S., Aiouache, F. & Assabumrungrat, S., 15/01/2014, In: Journal of Power Sources. 246, p. 719–728 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
FDTD analysis of nonlinear bragg grating based devices
Pinto, D., Obayya, S., Rahman, B. & Grattan, K., 12/2006, In: Optical and Quantum Electronics. 38, 15, p. 1217-1235 19 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Improved complex envelope alternative direction implicit finite difference time domain method for photonic bandgap cavities
Pinto, D. & Obayya, S., 01/2007, In: Journal of Lightwave Technology. 25, 1, p. 440-447 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Accurate perfectly matched layer finite-volume time-domain method for photonic bandgap devices
Pinto, D. & Obayya, S., 03/2008, In: IEEE Photonics Technology Letters. 20, 5, p. 339-341 3 p.
Research output: Contribution to Journal/Magazine › Letter › peer-review
Published
Nonlinear finite-volume time-domain analysis of photonic crystal-based resonant cavities
Pinto, D. & Obayya, S., 2008, In: IET Optoelectronics. 2, 6, p. 254-261 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
2D Analysis of Multimode Photonic Crystal Resonant Cavities with the Finite Volume Time Domain Method
Pinto, D. & Obayya, S., 2008, In: Optical and Quantum Electronics. 40, 11-12, p. 875-890 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Accurate finite element time domain modelling of resonant photonic bandgap cavities
Pinto, D. & Obayya, S., 2005. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Complex envelope alternating direction implicit finite difference time domain method for photonic bandgap structures
Pinto, D. & Obayya, S., 2006. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Time-domain modelling of nonlinear optical waveguides
Pinto, D. & Obayya, S., 2006. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract
Published
New Alternating-Direction-Implicit Finite-Difference-Time-Domain Method for Photonic Crystal Devices
Pinto, D. & Obayya, S., 2007. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract
Published
Novel Time Domain Technique for Photonic Bandgap Resonant Cavities
Pinto, D. & Obayya, S., 2008. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract
Published
Finite Volume Time Domain Analysis of Nonlinear Photonic Crystal Devices
Pinto, D. & Obayya, S., 2008. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract
Published
Novel Dual-Mesh Finite Volume Time Domain Method for the Analysis of Photonic Crystal Based Devices
Pinto, D. & Obayya, S., 2010. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract
Published
Modelling the temperature effects of melt pool position and wall height in additive manufacturing by direct laser deposition
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 1st International Conference on Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J., Mitchell, G., Mateus, A., Batista, F., Vasco, J., Correia, M., Andre, N., Lima, P., Novo, P., Custodio, P. & Martinho, P. (eds.). Leiria: Escola Superior Tecnologia Gestao Leiria, p. 224-231 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Component repair using laser direct metal deposition
Pinkerton, A. J., Wang, W. & Li, L., 07/2008, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 222, 7, p. 827-836 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Theoretical analysis of the coincident wire-powder laser deposition process
Pinkerton, A. J., Syed, W. U. H. & Li, L., 12/2007, In: Journal of Manufacturing Science and Engineering. 129, 6, p. 1019-1027 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An analytical model of beam attenuation and powder heating during coaxial laser direct metal deposition
Pinkerton, A. J., 2007, In: Journal of Physics D: Applied Physics. 40, 23, p. 7323-7334 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Thermal and microstructural aspects of the laser direct metal deposition of waspaloy
Pinkerton, A. J., Karadge, M., Syed, W. U. H. & Li, L., 08/2006, In: Journal of Laser Applications. 18, 3, p. 216-226 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An experimental and theoretical investigation of combined gas- and water-atomized powder deposition with a diode laser
Pinkerton, A. J., Syed, W. U. H. & Li, L., 2006, In: Journal of Laser Applications. 18, 1, p. 73-80 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multiple-layer laser deposition of steel components using gas- and water-atomised powders: the differences and the mechanisms leading to them
Pinkerton, A. J. & Li, L., 15/07/2005, In: Applied Surface Science. 247, 1-4, p. 175-181 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Direct additive laser manufacturing using gas- and water-atomised H13 tool steel powders
Pinkerton, A. J. & Li, L., 2005, In: International Journal of Advanced Manufacturing Technology. 25, 5-6, p. 471-479 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An experimental and numerical study of the influence of diode laser beam shape on thin wall direct metal deposition
Pinkerton, A. J. & Li, L., 2005, In: Journal of Laser Applications. 17, 1, p. 47-56 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances
Pinkerton, A. J. & Li, L., 21/07/2004, In: Journal of Physics D: Applied Physics. 37, 14, p. 1885-1895 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The development of temperature fields and powder flow during laser direct metal deposition wall growth
Pinkerton, A. J. & Li, L., 05/2004, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 218, 5, p. 531-541 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An analytical model of energy distribution in laser direct metal deposition
Pinkerton, A. J. & Li, L., 2004, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 218, 4, p. 363-374 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multiple-layer cladding of stainless steel using a high-powered diode laser: an experimental investigation of the process characteristics and material properties
Pinkerton, A. J. & Li, L., 1/04/2004, In: Thin Solid Films. 453-454, 2, p. 471-476 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The behaviour of water- and gas-atomised tool steel powders in coaxial laser freeform fabrication
Pinkerton, A. J. & Li, L., 1/04/2004, In: Thin Solid Films. 453-454, 2, p. 600-605 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modelling powder concentration distribution from a coaxial deposition nozzle for laser-based rapid tooling
Pinkerton, A. J. & Li, L., 02/2004, In: Journal of Manufacturing Science and Engineering. 126, 1, p. 33-41 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The significance of deposition point standoff variations in multiple-layer coaxial laser cladding (coaxial cladding standoff effects)
Pinkerton, A. J. & Li, L., 05/2004, In: International Journal of Machine Tools and Manufacture. 44, 6, p. 573-584 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Process characteristics and effects of gas- and water-atomized stainless steel powders in laser-based rapid tooling
Pinkerton, A. J. & Li, L., 08/2003, In: Journal of Laser Applications. 15, 3, p. 172-178 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effects of powder geometry and composition in coaxial laser deposition of 316L steel for rapid prototyping
Pinkerton, A. J. & Li, L., 2003, In: CIRP Annals - Manufacturing Technology. 52, 1, p. 181-184 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid prototyping using direct laser deposition - the effect of powder atomization type and flowrate
Pinkerton, A. J. & Li, L., 2003, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 217, 6, p. 741-752 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An investigation of the effect of pulse frequency in laser multiple-layer cladding of stainless steel
Pinkerton, A. J. & Li, L., 2003, In: Applied Surface Science. 208-209, p. 405-410 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The effect of laser pulse width on multiple-layer 316L steel clad microstructure and surface finish
Pinkerton, A. J. & Li, L., 15/03/2003, In: Applied Surface Science. 208-209, p. 411-416 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Guest Editorial: The 36th MATADOR Conference 2010
Pinkerton, A. J., 2012, In: Materials and Manufacturing Processes. 27, 4, p. 363-363 1 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Laser and electron beams - evolving tools for surface engineering
Pinkerton, A. J., 04/2009, In: Surface Engineering. 25, 3, p. 177-179 3 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Laser rapid manufacturing process advancement through powder morphology
Pinkerton, A. J., 2002.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
A method and model for pulsed laser cleaning of rapid manufactured parts
Pinkerton, A. J. & Li, K., 2007, Proceedings of the 21st International Conference on Surface Modification Technologies. Sudarshan, T. S. & Jeandin, M. (eds.). ASM International
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Direct laser deposition layer profiles and the factors affecting them
Pinkerton, A. J. & Li, L., 2002.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
A verified model of the behaviour of the axial powder stream concentration from a coaxial laser cladding nozzle
Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparative study of multiple layer laser deposition using water and gas atomised 316L stainless steel powders
Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The effect of diode laser beam shape and traverse direction on the direct metal deposition process
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Direct metal deposition by diode laser: modelling the effect of increased beam coupling
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Diode laser deposition of microstructurally graded components using gas- and water-atomised powder blends
Pinkerton, A. J., Syed, W. U. H. & Li, L., 2004, Proceedings of the 23rd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The effect of process parameters on residual stresses within an inconel 718 part produced by the Direct Laser Deposition process
Pinkerton, A. J., Shackleton, J., Moat, R., Li, L., Withers, P., Preuss, M., Allen, J., Hilton, P. & Folwell, R., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 601-610 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Explaining microstructural and physical variations in rapid additive manufactured waspaloy parts through the laser-deposition thermal cycle
Pinkerton, A. J., Syed, W. U. H., Karadge, M. & Li, L., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 822-831 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Alternative nozzle and metal delivery methods for laser-assisted metal deposition: (invited paper & presentation)
Pinkerton, A. J., 2005.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Diode laser metal deposition: The effect of pulsed beam parameters on superalloy microstructure and deposit morphology
Pinkerton, A. J., Moat, R. J., Li, L., Preuss, M. & Withers, P., 2006, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An analytical model of the combined powder-wire deposition process
Pinkerton, A. J., Syed, W. U. H. & Li, L., 2006, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A verified model of laser direct metal deposition using an analytical enthalpy balance method
Pinkerton, A. J., Moat, R., Shah, K., Li, L., Preuss, M. & Withers, P. J., 2007, Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Three dimensional analytical and finite element methods for simulating a moving melt pool with mass addition
Pinkerton, A. J., Kamara, A. M., Shah, K., Safdar, S. & Li, L., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 369-374 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Direct laser deposited titanium with controlled porosity for bone tissue engineering
Pinkerton, A. J., Paul, C. P., Iravani-Tabrizipoor, M., Kukreja, L. M. & Khajepour, A., 2008, Proceedings of the 27th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 421-430 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Laser direct metal deposition: theory and applications in manufacturing and maintenance
Pinkerton, A. J., 2010, Advances in laser materials processing : technology, research and applications. Lawrence, J. (ed.). Oxford: Woodhead Publishing Limited
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Porous surface structures by continuous and pulsed laser metal deposition for biomedical applications
Pinkerton, A. J., Ahsan, M. N., Paul, C. P. & Kukreja, L. M., 2009, Proceedings of the 23rd International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Advances and challenges in the modelling of laser melt pool processes: Keynote presentation at the Interfinish SERIA 2013 Asia-Pacific International Conference on Surface Engineering for Research and Industrial Applications
Pinkerton, A., 2013
Research output: Other contribution
Published
Advances in the modelling of laser direct metal deposition (invited)
Pinkerton, A., 02/2015, In: Journal of Laser Applications. 27, S1, 7 p., S15001.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Lasers in additive manufacturing
Pinkerton, A. J., 04/2016, In: Optics and Laser Technology. 78, Part A, p. 25-32 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Social Design Fiction. New Methods for the Design of Emerging Technology.
Pilling, M., Richards, D., Dunn, N. & Rennie, A., 31/05/2019, In: The Design Journal. 22, sup1, p. 1993-2005 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Dissolved organic carbon and biodegradable dissolved organic carbon determination in river water of the Strug Basin
Piech, A., Trzyna, K., Skwarczynska-Wojsa, A. L. & Douglas, T., 31/03/2019, In: JOURNAL OF CIVIL ENGINEERING, ENVIRONMENT AND ARCHITECTURE. 36, 1, p. 27-35 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Optimisation strategies to reduce renewables curtailment using transportable energy storage systems
Phurailatpam, C., Hu, Y., Keyvani, B., Zhao, N. & Flynn, D., 6/03/2024, Renewable Power Generation and Future Power Systems Conference 2023 (RPG 2023 UK). 29 ed. IEEE, Vol. 2023. p. 75-80 6 p. (IET Conference Proceedings).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Surface modification of bioceramics by grafting of tailored allyl phosphonic acid
Phillips, M. J., Duncanson, P., Wilson, K., Darr, J. A., Griffiths, D. V. & Rehman, I., 2005, In: Advances in Applied Ceramics. 104, 5, p. 261-267 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Synthesis and characterization of nano-biomaterials with potential osteological applications
Phillips, M. J., Darr, J. A., Luklinska, Z. B. & Rehman, I., 2003, In: Journal of Materials Science: Materials in Medicine. 14, 10, p. 875-882 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A 3D BEM modelling of body-scanning MIT system.
Pham, M. .. H. & Peyton, A. J., 2004, Proceedings of the XII international conference on electrical bio-impedance.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
High-speed, in-band performance measurement instrumentation for next generation IP networks
Pezaros, D. P., Georgopoulos, K. & Hutchison, D., 2010, In: Computer Networks. 54, 18, p. 3246-3263 18 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The development of a novel scanner to measure human composition.
Peyton, A. J., Tapp, H. S., Ktistis, C., Mackin, R. O., Wan-Daud, W. A., Goss, D. & Crescenzo, E., 2004, Proceedings of the XII international conference on electrical bio-impedance.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Electromagnetic imaging and tomography – a review of recent advances.
Peyton, A. J., Dickinson, S. J., Lionheart, W. R. B., Soleimani, M. & Pritchard, W. D. N., 2003, Proceedings of the institute of materials conference on on-line measurements for quality in the metals industry.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Addressing the difficulties in using inductive methods to evaluating human body composition.
Peyton, A. J., Mackin, R. O., Goss, D., Wan-Daud, W. A., Crescenzo, E., Saunders, N. H. & Tapp, H. S., 2003, In: Biométrie Humaine et Anthropologie. 21, p. 69-77 9 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Addressing the difficulties in using inductive methods to evaluating human body composition.
Peyton, A. J., Mackin, R. O., Goss, D., Wan-Daud, W. A., Crescenzo, E., Saunders, N. H. & Tapp, H. S., 2003, Proceedings of the international conference on robotics, vision, information and signal processing (ROVISP 2003).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The development of high frequency electromagnetic inductance tomography for low conductivity materials.
Peyton, A. J., Mackin, R. O., Goss, D., Crescenzo, E. & Tapp, H. S., 2002, Proceedings of the 2nd international symposium on process tomography.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Addressing the difficulties in using inductive methods to evaluating human body composition.
Peyton, A. J., Mackin, R. O., Goss, D., Wan-Daud, W. A., Crescenzo, E., Saunders, N. H. & Tapp, H. S., 2002, Proceedings of the 9th symposium of the société de biométrie humaine.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Development of electromagnetic tomography (EMT) for industrial applications: part 1: sensor design and instrumentation
Peyton, A. J., Borges, A. R., Oliveira, E., Lyon, G. M. & Yu, Z. Z., 1999, Proceedings of the world congress on industrial process tomography. Buxton
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An overview of electromagnetic inductance tomography: description of three different systems.
Peyton, A. J., Yu, Z. Z. & Lyon, G., 1996, In: Measurement Science and Technology. 7, p. 261-271 11 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Non Contact Cable Testing
Peyton, A. (Inventor), Coulton, P. (Inventor), Mackin, R. (Inventor) & John, K. (Inventor), 27/04/2010, Patent No. US7705606
Research output: Patent
Published
Atomic composition tomography using pulsed fast neutron analysis
Peyton, A. J., Aspinall, M., D'Mellow, B., Mackin, R. O. & Joyce, M. J., 2007, Proceedings of 5th World Congress on Industrial Process Tomography : Bergen, Norway, 3rd to 6th September, 2007.. Virtual Centre for Industrial Process Tomography
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Simulation of a THz vacuum triode using carbon-nanotube emitter
Petrolati, E., Paoloni, C. & Di Carlo, A., 2006, 2006 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE HELD JOINTLY WITH 2006 IEEE INTERNATIONAL VACUUM ELECTRON SOURCES. NEW YORK: IEEE, p. 197-198 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Swansea Bay tidal lagoon annual energy estimation
Petley, S. & Aggidis, G., 1/01/2016, In: Ocean Engineering. 111, p. 348-357 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Investigating the influence of the jet from three nozzle and spear design configurations on Pelton runner performance by numerical simulation
Petley, S., Panagiotopoulos, A., Benzon, S., Zidonis, A., Aggidis, G. A., Anagnostopoulos, I. & Papantonis, D., 17/09/2018.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Transient CFD and experimental analysis for improved Pelton turbine casing designs
Petley, S. & Aggidis, G. A., 17/09/2018.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Out with the old, in with the new: Pelton hydro turbine performance influence utilising three different injector geometries
Petley, S., Zidonis, A., Panagiotopoulos, A., Benzon, S., Aggidis, G. A., Anagnostopoulos, I. & Papantonis, D., 30/01/2019, In: Journal of Fluids Engineering. 141, 8, 14 p., 081103.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Numerical and experimental investigation of flow in horizontal axis Pelton turbines
Petley, S., 2019, Lancaster University. 293 p.
Research output: Thesis › Doctoral Thesis
Published
Transient CFD and experimental analysis for improved Pelton turbine casing designs
Petley, S. & Aggidis, G. A., 28/03/2019, In: IOP Conf. Series: Earth and Environmental Science. 240, 11 p., 022005.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Investigating the influence of the jet from three nozzle and spear design configurations on Pelton runner performance by numerical simulation
Petley, S., Panagiotopoulos, A., Benzon, D. S., Zidonis, A., Aggidis, G. A., Anagnostopoulos, J. & Papantonis, D., 28/03/2019, In: IOP Conf. Series: Earth and Environmental Science. 240, 11 p., 022004.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Opportunities for tidal range projects beyond energy generation: using Mersey barrage as a case study
Petley, S., Starr, D., Underwood, Z., Parish, L. & Aggidis, G., 1/12/2019, In: Frontiers of Architectural Research. 8, 4, p. 620-633 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Estimating the Energy Loss in Pelton Turbine Casings by Transient CFD and Experimental Analysis
Petley, S. & Aggidis, G., 26/12/2019, In: International Journal of Fluid Machinery and Systems. 12, 4, p. 400-417 18 p., O19059S.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Radar Altimetry as a Robust Tool for Monitoring the Active Lava Lake at Erebus Volcano, Antarctica
Peters, N. J., Oppenheimer, C., Brennan, P., Lok, L. B., Ash, M. & Kyle, P., 16/09/2018, In: Geophysical Research Letters. 45, 17, p. 8897-8904 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Process design of biodiesel production: Hybridization of ester-and transesterification in a single reactive distillation
Petchsoongsakul, N., Ngaosuwan, K., Kiatkittipong, W., Aiouache, F. & Assabumrungrat, S., 1/12/2017, In: Energy Conversion and Management. 153, p. 493-503 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Hybrid optical-fibre/geopolymer sensors for structural health monitoring of concrete structures
Perry, M., Saafi, M., Fusiek, G. & Niewczas, P., 24/02/2015, In: Smart Materials and Structures. 24, 4, 8 p., 045011.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Wireless surface acoustic wave sensors for displacement and crack monitoring in concrete structures
Perry, M., McKeeman, I., Saafi, M. B. S. & Niewczas, P., 22/02/2016, In: Smart Materials and Structures. 25, 3, 9 p., 035035.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A submillimetre wave extended interaction oscillator with novel broadband mechanical tuning
Perring, D., Phillips, G. & Carter, R. G., 1/12/1990, International Technical Digest on Electron Devices. IEEE, p. 897-900 4 p. (Technical Digest - International Electron Devices Meeting).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 1...16 17 18 19 20 21 22 23 ...66 Next

Research

School of Engineering

Quick Links

Connect With Us