Home > Research > School of Engineering > Publications & Outputs
View graph of relations
  1. Published

    Crab cavity system for the ILC.

    Burt, G., Dexter, A., Bellatoni, L., Goudket, P., Beard, C., Kalinin, A. & Ma, L., 2005, Proceedings of the ALCPG and ILC workshops.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  2. Published

    Development of circuits and system models for the synchronization of the ILC crab cavities.

    Burt, G., Carter, R. G., Dexter, A., Jenkins, R., Tahir, I., Beard, C., Goudket, P., Kalinin, A., Ma, L. & McIntosh, P., 2007, p. 3971-3973. 3 p.

    Research output: Contribution to conference - Without ISBN/ISSN Other

  3. Published

    Microwave pulse compression using helically corrugated waveguides.

    Burt, G., Samsonov, S. V., Phelps, A. D. R., Bratman, V. L., Ronald, K., Denisov, G. G., He, W., Young, A. R., Cross, A. W. & Knopolev, I., 2004, In: Conference Record - IEEE International Conference on Plasma Science. 33, 2

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  4. Published

    Analysis of Damping Requirements for Dipole Wake-Fields in RF Crab.

    Burt, G., Jones, R. M. & Dexter, A. C., 2007, In: IEEE Transactions on Nuclear Science. 54, 5

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  5. Published

    Anticrab cavities for the removal of spurious vertical bunch rotations caused by crab cavities

    Burt, G., Latina, A., Schulte, D., Dexter, A. C. & McIntosh, P. A., 26/09/2008, In: Physical Review Special Topics: Accelerators and Beams. 11, 9, 6 p., 092801.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  6. Published

    Dispersion of helically corrugated waveguides: Analytical, numerical and experimental study.

    Burt, G., Samsonov, S. V., Ronald, K., Denisov, G. G., Young, A. R., Bratman, V. L., Phelps, A. D. R., Cross, A. W., Knoplev, I., He, W., Thomson, J. & Whyte, C. G., 2004, In: Physical Review E. 70, 4

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  7. Published

    Coupler design considerations for the ILC crab cavity.

    Burt, G., Beard, C., Dexter, A., Goudket, P., McIntosh, P. & Wooldridge, E., 2006.

    Research output: Working paper

  8. Published

    Analysis of Wakefields in the ILC crab cavity.

    Burt, G., Dexter, A., Bellantoni, C., Beard, P. & Goudket, P., 2006, Proceedings of the EPAC 2006 conference..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  9. Published

    Progress towards crab cavity solutions for the ILC.

    Burt, G., Dexter, A., Bellantoni, C., Beard, P. & Goudket, P., 2006, Proceedings of the EPAC 2006 conference..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  10. Published

    Effect and tolerances of phase and amplitude errors in the ILC crab cavity.

    Burt, G., Goudket, P., Dexter, A. & Kalinin, A., 2006.

    Research output: Working paper

  11. Published

    Prediction of multipactor in the iris region of rf deflecting mode cavities

    Burt, G. & Dexter, A., 2011, In: Physical Review Special Topics: Accelerators and Beams. 14, 12, 11 p., 122002.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  12. Published

    X-band crab cavities for the CLIC beam delivery system

    Burt, G., Ambattu, P., Dexter, A., Abram, T., Dolgashev, V., Tantawi, S. & Jones, R. M., 1/12/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  13. Published

    DOES THE CLINICAL ENVIRONMENT INFLUENCE THE PROPERTIES OF BONE CEMENT?

    Burt, N., Green, S. M., Sandher, D. S. & Gregg, P. J., 1/01/2003, In: Journal of Bone and Joint Surgery, British Volume. 85-B, SUPP I, p. 13-14 2 p.

    Research output: Contribution to Journal/MagazineMeeting abstractpeer-review

  14. Published

    Damping of unwanted modes in SRF deflecting/crabbing cavities

    Burt, G. & Wang, H., 11/01/2014, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 734, Part A, p. 65-71 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  15. Published

    Design of a neutrino source based on beta beams

    Burt, G., Dexter, A. & Wildner, E., 23/07/2014, In: Physical Review Special Topics: Accelerators and Beams. 17, 51 p., 071002 .

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  16. Published

    LHC and CLIC LLRF final reports

    Burt, G., Dexter, A., Woolley, B., Tahir, I., Syratchev, I. & Wuensch, W., 25/10/2013, Switzerland: CERN. 82 p.

    Research output: Book/Report/ProceedingsBook

  17. Published

    Design and operation of a compact 1 MeV X-band Linac

    Burt, G., Ambattu, P., Lingwood, C., Abram, T., Burrows, I., Corlett, P., Goulden, A., Hartnett, T., Hindley, P., McIntosh, P. A., Middleman, K., Saveliev, Y., Smith, R. & White, C., 2012, Proceedings of LINAC2012, Tel-Aviv, Israel. p. 183-185 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  18. Published

    CLARA conceptual design report

    Burt, G. & Jamison, S., 9/05/2014, In: Journal of Instrumentation. 9, 5, 97 p., T05001.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  19. Published

    AWAKE: a proton-driven plasma wakefield acceleration experiment at CERN

    AWAKE Collaboration, 30/05/2016, In: Nuclear and Particle Physics Proceedings. 273-275, p. 175-180 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  20. Published

    Project-Based Cooperative Learning in Accelerator Science and Technology Education

    Burt, G. C., Appleby, R. B., Xia, G., Bailey, I. R., Clarke, J., Malyshev, O., Marks, N., Muratori, B., Poole, M., Saveliev, Y., Shepherd, B., Welsch, C., Wolski, A. & Seidel, M., 1/06/2017, IPAC 2017 Proceedings of the 8th International Particle Accelerator Conference. Arduini, G., Lindroos, M., Pranke, J. & Schaa, V. R. W. (eds.). JACoW

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  21. Published

    Multipactor in 4 rod crab cavities: 46th European Microwave Conference, EuMC 2016

    Burt, G., Constable, D. & Hall, B., 19/01/2017, p. 230-232. 3 p.

    Research output: Contribution to conference - Without ISBN/ISSN Otherpeer-review

  22. Published

    A Millimeter-Wave Klystron Upconverter With a Higher Order Mode Output Cavity

    Burt, G., Zhang, L., Constable, D. A., Yin, H., Lingwood, C. J., He, W., Paoloni, C. & Cross, A. W., 09/2017, In: IEEE Transactions on Electron Devices. 64, 9, p. 3857-3862 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  23. Published

    Crab Cavity Development

    Burt, G. C., 10/2015, The High Luminosity Large Hadron Collider: The New Machine for Illuminating the Mysteries of Universe. Brüning, O. & Rossi, L. (eds.). World Scientific, (Advanced Series on Directions in High Energy Physics; vol. 24).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  24. Published

    International linear collider reference design report volume 2: physics at the ILC

    Burt, G. C., 2007, CERN.

    Research output: Book/Report/ProceedingsCommissioned report

  25. Published

    Multipactor simulations of the SPL power coupler

    Burt, G., Dexter, A. C., Ambattu, P. K., Calaga, R. & Montesinos, E., 1/12/2011, p. 878-880. 3 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  26. Published

    Crab cavities for linear colliders

    Burt, G., Ambattu, P., Carter, R., Dexter, A., Tahir, I., Beard, C., Dykes, M., Goudket, P., Kalinin, A., Ma, L., McIntosh, P., Shulte, D., Jones, R., Bellantoni, L., Chase, B., Church, M., Khabouline, T., Latina, A., Adolphsen, C. & Li, Z. & 2 others, Seryei, A. & Xiao, L., 1/12/2009, p. 830-832. 3 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  27. Published

    The design of RF crab cavities for particle accelerators

    Burt, G., Ambattu, P., Goudket, P., Hall, B., McIntosh, P., Dexter, A., Beard, C., Tahir, I., Carter, R., Jones, R., Dykes, M., Kalinin, A. & Ma, L., 26/10/2009, IET Conference on High Power RF Technologies. 548 CP ed. IET, (IET Conference Publications; no. 548 CP).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  28. Published

    Copper prototype measurements of the HOM, LOM and SOM couplers for the ILC crab cavity

    Burt, G., Ambattu, P. K., Dexter, A., Goudket, P., McIntosh, P., Bellantoni, L., Li, Z. & Xiao, L., 1/01/2008, p. 568-570. 3 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  29. Published

    Power coupler for the ILC crab cavity

    Burt, G., Carter, R., Dexter, A., Jenkins, R., Beard, C., Goudket, P., McIntosh, P. A. & Bellantoni, L., 1/12/2007, Proceedings of the IEEE Particle Accelerator Conference, PAC07. IEEE, p. 2212-2214 3 p. 4441200. (Proceedings of the IEEE Particle Accelerator Conference).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  30. Published

    Dielectric and THz Acceleration (Data) programme at the Cockcroft Institute

    Burt, G., Letizia, R., Paoloni, C., Jamison, S. P., Saveliev, Y., Welsch, C. P., Appleby, R. B., Graham, D. M., Pacey, T. H., Owen, H., Xia, G., Cross, A. W., Phelps, A. & Ronald, K., 31/05/2017, Proceedings of the 28th Linear Accelerator Conference, LINAC 2016. JACoW Publishing, p. 62-64 3 p. MOOP09. (Proceedings of the 28th Linear Accelerator Conference, LINAC 2016).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  31. Published

    Surveying the Challenges to Improve Linear Accelerator-based Radiation Therapy in Africa: a Unique Collaborative Platform of All 28 African Countries Offering Such Treatment

    Burt, G., 1/12/2021, In: Clinical Oncology. 33, 12, p. E521-E529 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  32. Published

    Review of autonomous navigation for indoor aerial robots within a nuclear decommissioning context

    Burrell, T., Montazeri, A., Monk, S. D. & Taylor, C. J., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  33. Published

    Feedback control-based inverse kinematics solvers for a nuclear decommissioning robot

    Burrell, T. I., Montazeri, A., Monk, S. D. & Taylor, C. J., 5/09/2016, MECHATRONICS 2016: 7th IFAC Symposium on Mechatronic Systems & 15th Mechatronics Forum International Conference Loughborough University 5th - 8th September 2016.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  34. Published

    The Microphenotron: a robotic miniaturized plant phenotyping platform with diverse applications in chemical biology

    Burrell, T. I., Fozard, S., Holroyd, G. H., French, A. P., Pound, M. P., Bigley, C., Taylor, C. J. & Forde, B. G., 1/03/2017, In: Plant Methods. 13, 20 p., 10.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  35. Published

    Towards a Cooperative Robotic System for Autonomous Pipe Cutting in Nuclear Decommissioning

    Burrell, T. I., West, C., Monk, S. D., Montazeri, A. & Taylor, C. J., 5/09/2018, 2018 UKACC 12th International Conference on Control (CONTROL). IEEE, p. 283-288 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  36. Published

    Hydrogen solubility in zirconium intermetallic second phase particles

    Burr, P. A., Murphy, S. T., Lumley, S. C., Wenman, M. R. & Grimes, R. W., 11/2013, In: Journal of Nuclear Materials. 443, 1-3, p. 502-506 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  37. Published

    Hydrogen accommodation in Zr second phase particles: Implications for H pick-up and hydriding of Zircaloy-2 and Zircaloy-4

    Burr, P. A., Murphy, S. T., Lumley, S. C., Wenman, M. R. & Grimes, R. W., 04/2013, In: Corrosion Science. 69, p. 1-4 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  38. Published

    Novel filter designs that deliver filtration benefits produced by metal additive manufacturing

    Burns, N., Burns, M., Travis, D., Geekie, L., Rennie, A. & Weston, D. P., 10/2013, Proceedings of AFS 2013 Fall Conference: Innovation in Filter Media and Membranes. 13 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  39. Published

    Design, innovation and a new age for filtration

    Burns, N., Geekie, L., Travis, D., Burns, M. & Rennie, A., 06/2014.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  40. Published

    Improved filtration using additive manufacturing

    Burns, N., Geekie, L., Travis, D., Burns, M., Weston, D. P. & Rennie, A., 07/2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  41. Published

    Filtration efficiency gains by fabrication using additive manufacturing

    Burns, N., Vijayakumar, B., Rennie, A. & Geekie, L., 10/2014, Proceedings of the European Conference on Fluid-Particle Separation. 2 p. M3P2

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  42. Published

    Maximising open area whilst retaining strength in novel metal additive manufactured filter media

    Burns, N., Burns, M., Travis, D., Geekie, L., Hasib, H. & Rennie, A., 10/2014. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  43. Published

    Innovations in filtration through additive manufacturing: Paper: EP140165

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 09/2014. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  44. Published

    Designing advanced filtration media through metal additive manufacturing

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 02/2015. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  45. Published

    Designing advanced filtration media through metal additive manufacturing

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A. E. W., 03/2016, In: Chemical Engineering and Technology. 39, 3, p. 535-542 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  46. Published

    Metallic additive manufacturing applied in the filitration industry

    Burns, N., 04/2019, Lancaster University. 140 p.

    Research output: ThesisMaster's Thesis

  47. Published

    Surface Finishing of Metal AM Parts

    Burns, N., Molyneux, A. & Geekie, L., 29/11/2016. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  48. Published

    Cofactor NAD(P)H regeneration: how selective are the reactions?

    Burnett, J., Howe, R. F. & Wang, X., 1/06/2020, In: Trends in Chemistry. 2, 6, p. 488-492 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  49. Published

    Comparative life cycle assessment of NAD(P)H regeneration technologies

    Burnett, J., Sun, Z., Li, J., Wang, X. & Wang, X., 21/09/2021, In: Green Chemistry. 23, 18, p. 7162-7169 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  50. Published

    Directing the H2-driven selective regeneration of NADH via Sn-doped Pt/SiO2

    Burnett, J., Li, J., McCue, A., Kechagiopoulos, P. N., Howe, R. F. & Wang, X., 21/02/2022, In: Green Chemistry. 24, 4, p. 1451-1455 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  51. Published

    Supported Pt enabled proton-driven NAD(P)+ regeneration for biocatalytic oxidation

    Burnett, J., Chen, H., Li, J., Li, Y., Huang, S., Shi, J., McCue, A. J., Howe, R., Minteer, S. D. & Wang, X., 11/05/2022, In: ACS Applied Materials and Interfaces. 14, 18, p. 20943-20952 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  52. Published

    Application specific integrated circuit implementation of siso control laws.

    Burge, S. E., Grout, I. A. & Dorey, A. P., 1994, Proceedings of the IEE international conference on control '94. London: IEE, p. 1104-1110 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  53. Published

    Phase locked loop system design and measurement tutorial consisting of physical hardware and co-simulation environment

    Burbidge, M. J., 10/2004, In: International Journal of Electrical Engineering Education. 41, 4, p. 358-374 17 p.

    Research output: Contribution to Journal/MagazineJournal article

  54. Published

    Simple frequency counting techniques for analysis of VCO/CP-PLL coupled noise sensitivity in fully embedded CP-PLLs.

    Burbidge, M. J., 2004, Proceedings of the 2nd IEE integrated circuit test conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  55. Published

    Motivations and techniques of built in self-test for embedded frequency synthesis systems incorporating charge pump phase-locked loops.

    Burbidge, M., Lechner, A., Bell, G. & Richardson, A. M. D., 2004, IEE proceedings - circuits, devices and systems. 4 ed. Vol. 151. p. 337-348 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  56. Published

    Evaluation and detection of deterministic jitter causes in CP-PLLs due to macro level faults and pre-detection using simple methods.

    Burbidge, M. J., Lechner, A. & Richardson, A. M. D., 2003, In: Proceedings of the 9th IEEE international mixed signal test workshop (IMSTW03). p. 157-164 8 p.

    Research output: Contribution to Journal/MagazineJournal article

  57. Published

    Investigations for minimum invasion digital only built in ‘ramp’ based test techniques for charge pump PLLs.

    Burbidge, M. J., Poullet, F., Tijou, J. & Richardson, A. M. D., 08/2003, In: Journal of Electronic Testing. 19, 4, p. 481-490 10 p.

    Research output: Contribution to Journal/MagazineJournal article

  58. Published

    Investigations of automatic built in transient step response monitoring for embedded second order charge pump phase locked loop frequency synthesizers.

    Burbidge, M. J., Tijou, J. & Richardson, A. M. D., 2003, In: Journal of Electronic Testing.

    Research output: Contribution to Journal/MagazineJournal article

  59. Published

    Techniques for automatic on chip closed loop transfer function monitoring for embedded charge pump phase locked loops.

    Burbidge, M. J., Tijou, J. & Richardson, A. M. D., 19/12/2003, Design, Automation and Test in Europe Conference and Exhibition, 2003. p. 496-501 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  60. Published

    Investigations for minimum invasion digital only built in ‘ramp’ based test techniques for charge pump PLLs.

    Burbidge, M. J., Tijou, J., Poullet, F. & Richardson, A. M. D., 2002, Proceedings of the Seventh IEEE European Test Workshop, 2002.. IEEE, p. 95-102 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  61. Published

    Investigations of automatic built in transient step response monitoring for embedded second order charge pump phase locked loop frequency synthesisers.

    Burbidge, M. J. & Tijou, J. R., 2002, Proceedings of the 8th IEEE mixed signal test workshop.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  62. Published

    Simple digital only test approach for embedded charge-pump phase-locked loops.

    Burbidge, M. & Richardson, A. M. D., 2001, In: Electronics Letters. 37, 22, p. 1318-1319 2 p.

    Research output: Contribution to Journal/MagazineJournal article

  63. Published

    Test techniques for embedded charge pump phase-locked loops: problems, current BIST techniques and alternative suggestions.

    Burbidge, M., Richardson, A. M. D. & Lechner, A., 2001, Proceedings of the 7th IEEE international test workshop. p. 97-102 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  64. Published

    Bit-stream manipulation for SD modulator failure mode analysis.

    Burbidge, M., Georgopoulos, K., Lechner, A. & Richardson, A., 2006, Proceedings of the 11th IEEE European test symposium..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  65. Published

    Bacteria induced pH changes in tissue-engineered human skin detected non-invasively using Raman confocal spectroscopy

    Bullock, A. J., Garcia, M., Shepherd, J., Rehman, I. & MacNeil, S., 28/02/2020, In: APPLIED SPECTROSCOPY REVIEWS. 55, 2, p. 158-171 14 p.

    Research output: Contribution to Journal/MagazineReview articlepeer-review

  66. Published

    Dissolved organic carbon in soil solutions: a comparison of collection methods.

    Buckingham, S., Tipping, E. & Hamilton-Taylor, J., 01/2008, In: Soil Use and Management. 24, 1, p. 29-36 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  67. Published

    Concentrations and fluxes of dissolved organic carbon in UK topsoils.

    Buckingham, S., Tipping, E. & Hamilton-Taylor, J., 15/12/2008, In: Science of the Total Environment. 407, 1, p. 460-470 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  68. Published
    No renderer
  69. Published

    Realization of a carbon nanotube-based triode

    Brunetti, F., Lugli, P., Fiori, A., Orlanducci, S., Sessa, V., Tamburri, E., Toschi, F., Terranova, M. L., Riccitelli, R., Petrolati, E., von Neumann, L., Paoloni, C., Reale, A., di Carlo, A., Ciorba, A., Cirillo, M. & Merlo, V., 1/06/2006, Nanotechnology, 2006. IEEE-NANO 2006. Sixth IEEE Conference on. IEEE, Vol. 1. p. 246-249 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  70. Published

    Specificity and integration of responses: Ca2+ as a signal in polarity and osmotic regulation.

    Brownlee, C., Goddard, H., Hetherington, A. M. & Peake, L. A., 04/1999, In: Journal of Experimental Botany. 50, Specia, p. 1001-1011 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  71. Published

    Polarised development in the brown algae : common mechanisms and unique features.

    Brownlee, C., Bothwell, J. H. F., McAinsh, M., Hetherington, A. M. & Coelho, S., 04/2006, In: Comparative Biochemistry and Physiology - Part A: Molecular and Integrative Physiology. 143, 4 Supp, p. S100

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  72. Published

    An infrared sensor for an electric wheelchair obstacle avoidance system.

    Brown, M. W., Burge, S. E. & Bradley, D. A., 1996, Proceedings of the 5th mechatronics forum international conference. Portugal, p. 35-40 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  73. Published

    Lateral buckling of pultruded GRP I-section cantilevers

    Brooks, R. J. & Turvey, G. J., 1995, In: Composite Structures. 32, 1-4, p. 203-215 13 p.

    Research output: Contribution to Journal/MagazineJournal article

  74. Published

    Variable fused deposition modelling: analysis of benefits, concept design and tool path generation

    Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 511-517 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  75. Published

    Variable Fused Deposition Modelling – Concept Design and Tool Path Generation

    Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 06/2011, Rapid Design, Prototyping and Manufacturing: Proc Twelfth Conference on. p. 113-122 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  76. Published

    Experiencing interiors : ocularcentrism and Merleau-Ponty's redeeming of the role of vision

    Brook, I., 01/2002, In: Journal of the British Society for Phenomenology. 33, 1, p. 68-77 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  77. Published

    Can 'spirit of place' be a guide to ethical building.

    Brook, I., 2000, Ethics and the built environment. Fox, W. (ed.). London; New York: Routledge, 240 p. (Professional ethics).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  78. Published

    Photocatalytic initiation of electroless deposition

    Bromley, M. A., Boxall, C., Galea, S., Goodall, P. S. & Woodbury, S., 15/12/2010, In: Journal of Photochemistry and Photobiology A: Chemistry. 216, 2-3, p. 228-237 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  79. Published

    Semiconductor photocatalysis and metal deposition

    Bromley, M. & Boxall, C., 03/2012, Advances in Chemistry Research. Taylor, J. C. (ed.). Nova Science Publishers, Vol. 13.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  80. Published

    Method for formation of porous metal coatings

    Bromley, M. (Inventor) & Boxall, C. (Inventor), 5/04/2012, IPC No. C23C 18/18, Patent No. WO/2012/042203

    Research output: Patent

  81. Published

    Photocatalytically Initiated Electroless Deposition of macroporous metal films onto insulating substrates

    Bromley, M. & Boxall, C., 09/2012, In: Electrochemistry Communications. 23, p. 87-89 3 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  82. Published

    The nanoporous metallisation of insulating substrates through Photocatalytically Initiated Electroless Deposition (PIED)

    Bromley, M. & Boxall, C., 22/03/2012, In: MRS Online Proceedings Library. 1409, 6 p., mrsf11-1409-cc05-20.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  83. Published

    The metallisation of insulating substrates with nano-structured metal films of controllable pore dimension

    Bromley, M. A. & Boxall, C., 2013, In: Journal of Materials Chemistry A. 1, 20, p. 6152-6161 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  84. Published

    The nanoporous metallisation of polymer membranes through photocatalytically initiated electroless deposition

    Bromley, M. & Boxall, C., 2013, 6 ed. The Electrochemical Society. 10 p. (Processes at the Semiconductor Solution Interface; vol. 5)

    Research output: Book/Report/ProceedingsProceedings

  85. Published

    The development of nanoporous metal membranes for analytical separartions

    Bromley, M., 04/2013, Lancaster: Lancaster University. 226 p.

    Research output: ThesisDoctoral Thesis

  86. Published

    A study of cerium extraction by TBP and TODGA using a rotating diffusion cell

    Bromley, M. A. & Boxall, C., 12/2015, In: Nukleonika. 60, 4, p. 859-864 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  87. Published

    Method of metal deposition

    Bromley, M. A. (Inventor) & Boxall, C. (Inventor), 3/02/2015, IPC No. US Patent, Patent No. US 8,946,088 B2

    Research output: Patent

  88. Published

    The Effects of Nitric Acid on Extraction Properties of TODGA During Fission Product Management

    Bromley, M. A. & Boxall, C., 2017, In: MRS Advances. 2, 10, p. 563-568 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  89. Published

    A Study of Cerium Extraction Kinetics by TODGA in Acidified and Non-Acidified Organic Solvent Phases in the Context of Fission Product Management

    Bromley, M. A. & Boxall, C., 1/11/2018, In: Progress in Nuclear Science and Technology. 5, p. 70-73 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  90. Published
  91. Published

    The rapid photochemical reduction of U(VI) at high uranium concentrations relevant to spent nuclear fuel recycle processes

    Bromley, M. A., Boxall, C., Taylor, R. & Sarsfield, M., 31/10/2023, In: Progress in Nuclear Energy. 164, 104853.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  92. Published

    Electromechanical model of human atrial tissue using the discrete element method

    Brocklehurst, P., Zhang, H., Yang, D. & Ye, J., 2014, 11th World Congress on Computational Mechanics (WCCMXI).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  93. Published

    A 2D electro-mechanical model of human atrial tissue using the discrete element method

    Brocklehurst, P., Adeniran, I., Yang, D., Sheng, Y., Zhang, H. & Ye, J., 2015, In: Biomed Research International. 2015, 12 p., 854953.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  94. Published

    Electro-mechanical dynamics of spiral waves in a discrete 2D model of human atrial tissue

    Brocklehurst, P., Ni, H., Zhang, H. & Ye, J., 16/05/2017, In: PLoS ONE. 12, 5, 21 p., e0176607.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  95. Published

    A 2D Electromechanical Model of Human Atrial Tissue Using the Discrete Element Method

    Brocklehurst, P., Adeniran, I., Yang, D., Sheng, Y., Zhang, H. & Ye, J., 25/10/2015, In: Biomed Research International. 2015, 13 p., 854953.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  96. Published

    Older people and oral health: setting a patient-centred research agenda

    Brocklehurst, P. R., Mackay, L., Goldthorpe, J. & Pretty, I., 18/08/2015, In: Gerodontology. 32, 3, p. 222-228 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  97. Published

    Effects of fibroblast on electromechanical dynamics of human atrial tissue—insights from a 2D discrete element model

    Brocklehurst, P., Zhang, H. & Ye, J., 26/07/2022, In: Frontiers in Physiology. 13, 17 p., 938497.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  98. Published

    3D printed facial laser scans for the production of localised radiotherapy treatment masks

    Briggs, M., Clements, H., Wynne, N., Rennie, A. E. W. & Kellett, D., 10/2016, In: Journal of Visual Communication in Medicine. 39, 3-4, p. 99-104 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  99. Published

    Particle trajectories in a four rod crab cavity

    Brett, D. R., Appleby, R. B., Burt, G. & Hall, B., 11/01/2014, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 734, Part A, p. 79-83 5 p.

    Research output: Contribution to Journal/MagazineSpecial issuepeer-review

  100. Published

    Accurate crab cavity modeling for the high luminosity Large Hadron Collider

    Brett, D. R., Appleby, R. B., De Maria, R., Barranco Garcia, J., Tomas Garcia, R., Hall, B. & Burt, G., 2/10/2014, In: Physical Review Special Topics: Accelerators and Beams. 17, 10, 12 p., 104001.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

Back to top