Home > Research > School of Engineering > Publications & Outputs
View graph of relations
  1. Chapter (peer-reviewed)
  2. Published

    RF Systems

    Calaga, R., Baudrenghien, P., Burt, G., Capatina, O., Jensen, E., Montesinos, E. & Ratti, A., 29/02/2024, The High Luminosity Large Hadron Collider: New Machine for Illuminating the Mysteries of the Universe. Brüning, O. & Rossi, L. (eds.). World Scientific, p. 199-224 26 p. (Advanced Series on Directions in High Energy Physics).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  3. Published

    Additive Manufacturing as an Enabler of Environmental Solutions to Address Food Security

    Roberts, J., Donkersley, P., Ashmore, L. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 287-297 11 p. (Springer Tracts in Additive Manufacturing).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  4. Published

    Viscous Layer Formation in Electrochemical Polishing Laser-Powder Bed Fusion Parts with Different Surface Profiles

    Zhu, H., Tian, Y. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 219-228 10 p. (Springer Tracts in Additive Manufacturing).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  5. Published

    Robotics and Artificial Intelligence in the Nuclear Industry: From Teleoperation to Cyber Physical Systems

    Shanahan, D., Wang, Z. & Montazeri, A., 31/03/2023, Artificial intelligence for Robotics and Autonomous Systems. Cham: Springer Nature, 43 p. (Studies in Computational Intelligence).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  6. Published

    Real-Time Defect Detection of Die Cast Rotor in EV Induction Motor Based on Circular Flux Sensing Coils

    Zhu, Q., Wang, X., Wang, H., Xia, M., Cao, W. & Lu, S., 30/11/2022, Advanced Sensors and Sensing Technologies for Electric Vehicles. Cao, W. & Lu, S. (eds.). AIP Publishing, p. 1-26 26 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  7. Published

    Virtual workshops using Microsoft Teams

    Roberts, J. & Munday, D., 20/07/2022, 100 Ideas for Active Learning. Oprandi, P. & Betts, T. (eds.). University of Sussex Library, p. 865-872 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  8. Published

    Microsoft SharePoint integration within Teams for delivery of lecture content

    Munday, D. & Roberts, J., 20/07/2022, 100 Ideas for Active Learning. Oprandi, P. & Betts, T. (eds.). Brighton: University of Sussex Library, p. 857-864 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  9. Forthcoming

    Event-based Robust Control Techniques for Wheel-Based Robots Under Cyber-attack and Dynamic Quantizer

    Saeedi, M., Zarei, J., Seif, M. & Montazeri, A., 2022, (Accepted/In press) Mobile Robots: Motion Control and Path Planning. Cham: Springer Nature, 35 p. (Studies in Computational Intelligence).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  10. Published

    Vacuum Electronic Devices

    Paoloni, C., 8/12/2021, THz Communications: Paving the Way Towards Wireless Tbps. Kürner, T., Mittleman, D. M. & Nagatsuma, T. (eds.). Cham: Springer, p. 317-327 11 p. (Springer Series in Optical Sciences; vol. 234).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  11. Published

    ULTRAWAVE

    Paoloni, C., 8/12/2021, THz Communications: Paving the Way Towards Wireless Tbps. Kürner, T., Mittleman, D. M. & Nagatsuma, T. (eds.). Cham: Springer, p. 423-425 3 p. (Springer Series in Optical Sciences; vol. 234).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  12. Published

    Terahertz Front End Technology and Deployment for Ultra-High Capacity Links

    Magne, F., Le, T., Llorente, R., Paoloni, C. & Ramirez, A., 11/08/2021, Next Generation Wireless Terahertz Communication Networks. Ghafoor, S., Husain Rehmani, M. & Davy, A. (eds.). London: CRC Press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  13. Published

    Unmanned Aerial Systems: Autonomy, Cognition and Control

    Montazeri, A., Can, A. & Imran, I., 21/01/2021, Unmanned Aerial Systems: Theoretical Foundation and Applications. Koubaa, A. & Taher Azar, A. (eds.). Elsevier, p. 47-80 34 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  14. Published

    Community-University Research: A Warts and All Account

    Whittle, J., Ferrario, M. A. & Simm, W., 1/01/2020, Into the Wild: Beyond the Design Research Lab. Chamberlain, A. & Crabtree, A. (eds.). Springer International Publishing, p. 115-147 33 p. (Studies in Applied Philosophy, Epistemology and Rational Ethics ; vol. 48).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  15. Published

    Case study on Resource Recovery: linking renewable energy, waste management and sustainable agriculture

    Semple, K., Marshall, R., Lag Brotons, A., Herbert, B. & Hurst, L., 12/2018, From waste to resource productivity: Evidence and case studies. p. 39-50 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  16. Published

    Hydrogen Production for PEM Fuel Cells

    Basile, A., Iulianelli, A., Bagnato, G. & Dalena, F., 11/11/2015, Production of Hydrogen from Renewable Resources. Springer, p. 315-338 24 p. (Biofuels and Biorefineries).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  17. Published

    Monitoring degradation in the field

    Swingler, J., Jones, J., Bryant, M. D., Feinberg, A., Ma, X. & Weaver, P. M., 30/12/2014, The physics of degradation in engineered materials and devices: fundamentals and principles. Swingler, J. (ed.). Momentum Press , p. 117-151 34 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  18. Published

    The role of technical functional analysis in innovative design of bespoke rapid manufactured parts: medical industry applications

    Lupeanu, M., Rosu, M-M., Rennie, A., Neagu, C. & Brooks, H., 06/2013, Advances in Production, Automation and Transportation Systems: Proceedings of the 6th WSEAS International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS13) and 4th International Conference on Automotive and Transportation Systems (ICAT13). Brasov, Romania: WSEAS Press, Vol. 13. p. 227-232 6 p. (Mathematics and Computers in Science and Engineering Series; vol. 13).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  19. Published

    Testing of pultruded GFRP materials and structures for civil engineering

    Turvey, G., 2013, Advanced Composites in Civil Engineering. 1st ed. Woodhead Publishing Limited, p. 440-508 69 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  20. Published

    An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs)

    Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2012, Dynamic methods and process advancements in mechanical, manufacturing, and materials engineering. Davim, J. P. (ed.). Hershey, Penn.: IGI Global, p. 73-90 18 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  21. Published

    Semiconductor photocatalysis and metal deposition

    Bromley, M. & Boxall, C., 03/2012, Advances in Chemistry Research. Taylor, J. C. (ed.). Nova Science Publishers, Vol. 13.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  22. Published

    Opportunities offered by additive manufacturing in creative businesses: informing designers

    Anthony, R., Evans, M., Rennie, A. & Kirby, E., 09/2011, 13th International Conference on Engineering & Product Design Education (EPDE 11). p. 623-628 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  23. Published

    Use of FDM in an undergraduate student project: design, build and test a model wind turbine

    Widden, M., Gunn, K. & Rennie, A., 09/2010, 3rd International Conference on Additive Technologies (iCAT 2010); DAAAM Specialized Conference. DAAAM International, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  24. Published

    Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter

    Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 181-191 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  25. Published

    Templates for consumer use in designing customised products

    Ariadi, Y. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 450-458 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  26. Published

    Development of an Additive Layer Manufacturing (ALM) selection tool for direct manufacture of products

    Smith, P. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 507-518 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  27. Published

    The application of rapid manufacturing technologies in the spare parts industry

    Hasan, S. & Rennie, A., 08/2008, Sild Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 584-590 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  28. Published

    Development of an Additive Layer Manufacturing Selection Tool for Rapid Manufacturing Applications

    Smith, P. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 69-79 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  29. Published

    Virtual Trading System for Rapid Manufactured Products

    Hasan, S. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 127-135 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  30. Published

    Design templates for consumer use in customising additive layer manufactured products

    Ariadi, Y. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 137-144 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  31. Published

    Test of A/D Converters

    Richardson, A. & Lechner, A., 2008, Test & Diagnostics of Analogue, Mixed Signal & RF Integrated Circuits. Sun, Y. (ed.). Stevenage: IET Press, p. 213-234 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  32. Published

    Phase Locked Loop Test Methodology

    Richardson, A. & Burbidge, M., 2008, Test and Diagnosis of Analogue, Mixed-signal and RF Integrated Circuits. Sun, Y. (ed.). Stevenage: IET Press, p. 277-306 30 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  33. Published

    Effect of wind loading on low rise buildings using finite element modelling and computational fluid dynamics: A commercially focused appoach

    Taylor, S., Rennie, A. & McDonald, W., 2007, Virtual and Rapid Manufacturing: Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J. D. S. (ed.). London: Taylor & Francis Group, p. 811-816 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  34. Published

    From Concept to Manufacture: Effective use of CAD and FEA Without Compromising Design Intent

    Taylor, S. M., Rennie, A. E. W., Quayle, S. & Rawcliffe, N., 10/06/2005, Rapid Design, Prototyping and Manufacture: Proc. Sixth National Conference on . Rennnie, A., Jacobson, D. & Bocking, C. (eds.). X-CD Technologies Inc, p. 101-107 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  35. Published

    The applications of photocatalytic waste minimisation in nuclear fuel processing

    Boxall, C., Le Gurun, G., Taylor, R. J. & Xiao, S., 2005, Handbook of Environmental Chemistry. Huntzinger, O. (ed.). Berlin: SPRINGER-VERLAG BERLIN, Vol. 2. p. 451-481 31 p. (Handbook of Environmental Chemistry ; vol. 2).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  36. Published

    An Investigation into the Use of Spray Formed Al/Si Metal Matrix Composites for Use as Injection Mould Die Inserts

    Bocking, C., Jacobson, D. M. & Rennie, A., 09/2001, Time Compression technologies Conference 2001: Proceedings of. Rapid News Publications PLC, 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  37. Published

    Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming

    Bocking, C., Jacobson, D. M. & Rennie, A., 06/2001, 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of: iMAPS Strasbourg 2001, "The Millenium Conference". p. 412-415 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  38. Published

    Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models

    Bocking, C. E., Rennie, A. & Bennett, G. R., 08/2000, 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin, p. 469-477 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  39. Published

    Surface Flatness Measurement in Stereolithography

    Male, J. C., Rennie, A. & Bennett, G. R., 06/2000, The Eighth International Conference on Rapid Prototyping: Proc. of. The University of Dayton, p. 111-117 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  40. Published

    A system for the generation of liquid metal droplets using electromotive forces

    Rennie, A. & Bennett, G. R., 09/1997, Proceedings World Congress: Manufacturing Technology Towards 2000: Incorporating the 7th International Conference on Manufacturing Engineering and the 3rd Australasian Conference on Rapid Product Development. James Cook University of North Queensland, p. 501-510 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  41. Published

    The wear of High Speed Selective Jet Electrodeposition electrodes when used as EDM tools

    Dover, S. J., Rennie, A. & Bennett, G. R., 11/1996, Proceedings of the Second National Conference on developments in rapid prototyping and tooling. Mechanical Engineering Publications Ltd, p. 187-199 13 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  42. Published

    Rapid prototyping using electrodeposition of copper

    Dover, S. J., Rennie, A. & Bennett, G. R., 08/1996, Solid Freeform Fabrication Symposium 1996. University of Texas at Austin, p. 191-198 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  43. Published

    Analytical solutions of composite plate and shell structures and their engineering applications

    Ye, J., 1996, Advances in Applied Mechanics Research in the UK. Beijing: Science Press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  44. Published

    Three-dimensional buckling analysis of orthotropic cylinders subjected to thermo-mechanical loadings.

    Soldatos, K. P. & Ye, J., 1995, Homogeneity and Nonlinearity in Solid Mechanics . Parker, D. F. & England, A. H. (eds.). Kluwer Academic Publishers, (Solid Mechanics and Its Applications; vol. 39).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  45. Published

    The Photoelectrophoresis of Colloidal Iron Oxides I: Hematite (alpha-Fe2O3)

    Boxall, C., Zhang, Z. & KELSALL, G. H., 1993, Colloids in the Aquatic Environment. Thadros, T. & Gregory, J. (eds.). Amsterdam: Elsevier Science Ltd., p. 145-163 19 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  46. Chapter
  47. Published

    Destilación (II): Destilación flash

    Moure Abelenda, A. & Feijoo Costa, G. (ed.), 1/05/2023, Destilación (II): Destilación flash. Feijoo, G. & Moure Abelenda, A. (eds.). Madrid: Notas de Enxeñaría Química, Vol. 11. p. 26 - 34

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  48. Published

    Raman spectroscopy and machine learning for diagnosis and monitoring of cancer

    Greenop, M., Meza Ramirez, C. A. & Rehman, I. U., 28/02/2023, Optical Spectroscopy and Imaging for Cancer Diagnostics: Fundamentals, Progress, and Challenges. Melikechi, N. (ed.). World Scientific Publishing, p. 256-298 43 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  49. Published

    Materials and Processing

    Kennedy, A. & Shipway, P., 27/12/2022, Introduction to Mechanical Engineering: Part 1. Clifford, M. (ed.). London: Routledge, p. 89-184 96 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  50. Published

    4.11 - Biological and Microbial Fuel Cells

    Da Li, L., Şahin, S., Izadi, P., Ghangrekar, M., Duteanu, N. M., Erable, B., Scott, K. & Yu, E. H., 2/03/2022, Comprehensive Renewable Energy, Second Edition: Volume 1-9. Elsevier, Vol. 1-4. p. 290-316 27 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  51. Published

    Powder Characterization – Methods, Standards and State of the Art

    Groarke, R., Vijayaraghavan, R. K., Powell, D., Rennie, A. & Brabazon, D., 1/06/2021, Fundamentals of Laser Powder Bed Fusion of Metals. Yadroitsev, I., Yadroitsava, I., Du Plessis, A. & MacDonald, E. (eds.). Elsevier, p. 491-527 37 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  52. Published

    Acoustic Monitoring of Joint Health

    Spain, L. & Cheneler, D., 17/03/2021, Data Acquisition: Recent Advances and Applications in Biomedical Engineering. Płaczek, B. (ed.). InTech

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

Previous 1 2 3 4 5 6 7 8 ...121 Next

Back to top