Home > Research > School of Engineering > Publications & Outputs
View graph of relations
  1. 2020
  2. Published

    Hydrogen embrittlement through the formation of low-energy dislocation nanostructures in nanoprecipitation-strengthened steels

    Gong, P., Nutter, J., Rivera-Diaz-Del-Castillo, P. E. J. & Rainforth, W. M., 11/11/2020, In: Science Advances. 6, 46, 9 p., eabb6152.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  3. Published

    A novel dissimilar single-lap joint with interfacial stiffness improvement

    Yousefi Kanani, A., Hou, X. & Ye, J., 15/11/2020, In: Composite Structures. 252, 11 p., 112741.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  4. Published

    Tailoring of activated carbon with ammonia for enhanced anaesthetic sevoflurane adsorption

    Nam Ang, T., Young, B. R., Taylor, M., Burrell, R., Kheireddine Aroua, M. & Baroutian, S., 15/11/2020, In: Separation and Purification Technology. 251, 12 p., 117404.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  5. Published

    A Comparative Study of Diffusion Coefficients from Convective and IR Drying of Woodchip

    Pryce, M., Cheneler, D., Martin, A. & Aiouache, F., 16/11/2020, In: Journal of Fluid Flow, Heat and Mass Transfer. 7, p. 66-72 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  6. Published

    Action conditional recurrent Kalman networks for forward and inverse dynamics learning

    Shaj, V., Becker, P., Buchler, D., Pandya, H., van Duijkeren, N., Taylor, C. J., Hanheide, M. & Neumann, G., 18/11/2020, Proceedings of Machine Learning Research.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  7. Published

    A point defect model for YBa2Cu3O7 from density functional theory

    Murphy, S. T., 20/11/2020, In: Journal of Physics Communications. 4, 11, 14 p., 115003.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  8. Published
  9. Published

    An Overview of Modern Thermo-Conductive Materials for Heat Extraction in Electrical Machines

    Kulan, M. C., Sahin, S. & Baker, N. J., 24/11/2020, In: IEEE Access. 8, p. 212114-212129 16 p., 9268160.

    Research output: Contribution to Journal/MagazineReview articlepeer-review

  10. Published
  11. Published
  12. Published

    Reduced chatter sliding mode control for hydraulic manipulators based on continuous–time state dependent parameter models

    Nemati, H., Bandala Sanchez, M., Albrecht, O. & Taylor, C. J., 27/11/2020, 4th Australian and New Zealand Control Conference (ANZCC). IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  13. Published

    Comparison of different synthesis schemes for production of sodium methoxide from methanol and sodium hydroxide

    Aeamsuksai, N., Mueansichai, T., Charoensuppanimit, P., Kim-Lohsoontorn, P., Aiouache, F. & Assabumrungrat, S., 30/11/2020, In: Engineering Journal . 24, 6, p. 63-77 15 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  14. Published

    Grain refinement in laser powder bed fusion: The influence of dynamic recrystallization and recovery

    Sabzi, H. E., Aboulkhair, N. T., Liang, X., Li, X. H., Simonelli, M., Fu, H. & Rivera-Díaz-del-Castillo, P. E. J., 30/11/2020, In: Materials and Design. 196, 10 p., 109181.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  15. Published

    Long-range millimetre wave wireless links enabled by travelling wave tubes and resonant tunnelling diodes

    Paoloni, C., Basu, R., Billa, L., Mahadev Rao, J., Letizia, R., Ni, Q., Wasige, E., Al-Khalidi, A., Wang, J. & Morariu, R., 30/11/2020, In: IET Microwaves, Antennas and Propagation. 14, 15, p. 2110 - 2114 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  16. Published

    Process simulation of sodium methoxide production from methanol and sodium hydroxide using reactive distillation coupled with pervaporation

    Aeamsuksai, N., Mueansichai, T., Charoensuppanimit, P., Kim-Lohsoontorn1, P., Aiouache, F. & Assabumrungrat, S., 30/11/2020, In: Engineering Journal . 24, 6, p. 63-77 15 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  17. Published

    Reconstruction and identification of boosted di-τ systems in a search for Higgs boson pairs using 13 TeV proton-proton collision data in ATLAS

    Collaboration, A., Barton, A. E., Bertram, I. A., Borissov, G., Bouhova-Thacker, E. V., Fox, H., Henderson, R. C. W., Jones, R. W. L., Kartvelishvili, V., Long, R. E., Love, P. A., Muenstermann, D., Parker, A. J., Sanderswood, I., Smizanska, M., Tee, A. S., Walder, J., Wharton, A. M., Whitmore, B. W. & Yexley, M., 30/11/2020, In: Journal of High Energy Physics. 2020, 11, 47 p., 163.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  18. Published

    A review on nanostructure-based mercury (II) detection and monitoring focusing on aptamer and oligonucleotide biosensors

    Şahin, S., Caglayan, M. O. & Üstündağ, Z., 1/12/2020, In: Talanta. 220, 121437.

    Research output: Contribution to Journal/MagazineReview articlepeer-review

  19. Published

    Acceleration of relativistic beams using laser-generated terahertz pulses

    Hibberd, M. T., Healy, A. L., Lake, D. S., Georgiadis, V., Smith, E. J., Finlay, O. J., Pacey, T. H., Jones, J. K., Saveliev, Y., Walsh, D. A., Sneddon, E. W., Appleby, R. B., Burt, G., Graham, D. M. & Jamison, S., 1/12/2020, In: Nature Photonics. 14, p. 755–759 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  20. Published

    Design Study of a High-Power Ka-Band High-Order-Mode Multibeam Klystron

    Cai, J., Syratchev, I. & Burt, G., 1/12/2020, In: IEEE Transactions on Electron Devices. 67, 12, p. 5736 - 5742 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  21. Published

    Determination of jet calibration and energy resolution in proton–proton collisions at √s=8TeV using the ATLAS detector

    Collaboration, A., Barton, A. E., Bertram, I. A., Borissov, G., Bouhova-Thacker, E. V., Fox, H., Henderson, R. C. W., Jones, R. W. L., Kartvelishvili, V., Long, R. E., Love, P. A., Muenstermann, D., Parker, A. J., Sanderswood, I., Smizanska, M., Tee, A. S., Walder, J., Wharton, A. M., Whitmore, B. W. & Yexley, M., 1/12/2020, In: European Physical Journal C: Particles and Fields. 80, 12, 81 p., 1104.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  22. Published

    Enrichment of surface oxygen functionalities on activated carbon for adsorptive removal of sevoflurane

    Ang, T. N., Young, B. R., Taylor, M., Burrell, R., Aroua, M. K., Chen, W.-H. & Baroutian, S., 1/12/2020, In: Chemosphere. 260, 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  23. Published

    GCC Countries' Renewable Energy Penetration and the Progress of Their Energy Sector Projects

    Alharbi, F. & Csala, D., 1/12/2020, In: IEEE Access. 8, p. 211986-212002 17 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  24. Published

    HF Wire-Mesh Dipole Antennas for Broadband Ice-Penetrating Radar

    Hawkins, J. D., Lok, L. B., Brennan, P. V. & Nicholls, K. W., 1/12/2020, In: IEEE Antennas and Wireless Propagation Letters. 19, 12, p. 2172 - 2176 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  25. Published

    Simulating uranium sorption onto inorganic particles: The effect of redox potential

    Degueldre, C. & McGowan, S., 1/12/2020, In: Journal of Environmental Radioactivity. 225, 11 p., 106408.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  26. Published

    Special issue: Molecular research on dental materials and biomaterials 2018

    Ur Rehman, I. & Melo, M. A., 1/12/2020, In: International Journal of Molecular Sciences. 21, 23, p. 1-3 3 p.

    Research output: Contribution to Journal/MagazineEditorialpeer-review

  27. Published

    Two-bay pultruded GFRP safety Barrier/Guardrail – Testing, analysis and compliance with standards

    Turvey, G. J. & Milburn, J., 1/12/2020, In: Composite Structures. 253, 12 p., 112745.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  28. Published

    Scaling of beam collective effects with bunch charge in the compactlight free-electron laser

    Di Mitri, S., Latina, A., Aicheler, M., Aksoy, A., Alesini, D., Burt, G., Castilla, A., Clarke, J., Cortés, H. M. C., Croia, M., D’auria, G., Diomede, M., Dunning, D., Ferrario, M., Gallo, A., Giribono, A., Goryashko, V., Mostacci, A., Nguyen, F. & Rochow, R. & 7 others, Scifo, J., Spataro, B., Thompson, N., Vaccarezza, C., Vannozzi, A., Wu, X. & Wuensch, W., 4/12/2020, In: Photonics. 7, 4, 19 p., 125.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  29. Published
  30. Published

    A review of passive methods in microchannel heat sink application through advanced geometric structure and nanofluids: Current advancements and challenges

    Japar, W. M. A. A., Sidik, N. A. C., Rahman, S., Asako, Y. & Nurul Akmal Yusof, S., 8/12/2020, In: Nanotechnology Reviews. 9, 1, p. 1192-1216 25 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  31. Published

    Effect of melting modes on microstructure and tribological properties of selective laser melted AlSi10Mg alloy

    Wu, H., Ren, Y., Ren, J., Cai, A., Song, M., Liu, Y., Wu, X., Li, Q., Huang, W., Wang, X. & Baker, I., 8/12/2020, In: Virtual and Physical Prototyping. 15, sup1, p. 570-582 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  32. Published

    A systematic study of rheological properties of waterironoxide nanofluids with graphene nanoflakes

    Arifutzzaman, A., Ismail, A. F., Alam, M. Z., Khan, A. A., Saidur, R., C.W., T. (Editor), W., C.-T. (Editor), B.S.L., H. (Editor) & X., X. (Editor), 11/12/2020.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  33. Published

    Reversible Trapping of Colloids in Microgrooved Channels via Diffusiophoresis under Steady-State Solute Gradients

    Singh, N., Vladisavljević, G. T., Nadal, F., Cottin-Bizonne, C., Pirat, C. & Bolognesi, G., 11/12/2020, In: Physical review letters. 125, 24, 248002.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  34. Published

    Computational Fluid Dynamics Analysis of Floating Offshore Wind Turbines in Severe Pitching Conditions

    Ortolani, A., Persico, G., Drofelnik, J., Jackson, A. & Campobasso, S., 13/12/2020, In: Journal of Engineering for Gas Turbines and Power. 142, 12, 15 p., 1210003.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  35. Published

    University Programmes during COVID-19 Pandemic

    Rennie, A., Gamage, K. A. A. & Lambert, C., 14/12/2020, Scholarly Community Encyclopdeia: COVID-19. Basel, Switzerland: MDPI AG, 4 p. 4362

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNEntry for encyclopedia/dictionary

  36. Published

    Investigation of electrical conductivity, optical property, and stability of 2D MXene nanofluid containing ionic liquids

    Bakthavatchalam, B., Habib, K., Saidur, R., Aslfattahi, N. & Rashedi, A., 15/12/2020, In: Applied Sciences. 10, 24, p. 1-20 20 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  37. Published

    Dark current spikes as an indicator of mobile dislocation dynamics under intense dc electric fields

    Engelberg, E. Z., Paszkiewicz, J., Peacock, R., Lachmann, S., Ashkenazy, Y. & Wuensch, W., 17/12/2020, In: Physical Review Accelerators and Beams. 23, 12

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  38. Published

    High-gradient behavior of a dipole-mode rf structure

    Woolley, B., Burt, G., Dexter, A. C., Peacock, R., Millar, W. L., Catalan Lasheras, N., Degiovanni, A., Grudiev, A., McMonagle, G., Syratchev, I., Wuensch, W., Rodriguez Castro, E. & Giner Navarro, J., 17/12/2020, In: Physical Review Accelerators and Beams. 23, 12, 11 p., 122002.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  39. Published
  40. Published
  41. Published

    Optimization of electrocatalyst performance of platinum–ruthenium induced with MXene by response surface methodology for clean energy application

    Abdullah, N., Saidur, R., Zainoodin, A. M. & Aslfattahi, N., 20/12/2020, In: Journal of Cleaner Production. 277, 10 p., 123395.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  42. Published

    Simultaneous optical coherence tomography and scheimpflug imaging using the same incident light

    Li, X., Lawman, S., Williams, B. M., Ye, S., Shen, Y. & Zheng, Y., 21/12/2020, In: Optics Express. 28, 26, p. 39660-39676 17 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  43. Published

    Advancement of Oscillating Water Column Wave Energy Technologies through Integrated Applications and Alternative Systems

    Doyle, S. & Aggidis, G., 22/12/2020, In: International Journal of Energy and Power Engineering. 14, 12, p. 401-412 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  44. Published

    Probabilistic impact of wind energy integration on distribution transformers

    Li, Q. & Zhao, N., 22/12/2020, In: Energy Reports. 6, p. 491-496 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  45. Published

    Alignment of the ATLAS Inner Detector in Run 2

    Collaboration, A., Barton, A. E., Bertram, I. A., Borissov, G., Bouhova-Thacker, E. V., Fox, H., Henderson, R. C. W., Jones, R. W. L., Kartvelishvili, V., Long, R. E., Love, P. A., Muenstermann, D., Parker, A. J., Sanderswood, I., Smizanska, M., Tee, A. S., Walder, J., Wharton, A. M., Whitmore, B. W. & Yexley, M., 24/12/2020, In: European Physical Journal C: Particles and Fields. 80, 12, 41 p., 1194.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  46. Published

    An Adaptive Scheme to Estimate Unknown Parameters of an Unmanned Aerial Vehicle

    Imran, I. & Montazeri, A., 28/12/2020, 2020 International Conference Nonlinearity, Information and Robotics (NIR). IEEE, p. 1-6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  47. Published

    Design of a chattering-free sliding mode control system for robust position control of a quadrotor

    Can, A., Efstathiades, H. & Montazeri, A., 28/12/2020, Proceedings of the 2020 International Conference of Nonlinearity, Information and Robotics (NIR). IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  48. Published

    A Study on Reusable Metal Component as Burnable Absorber Through Monte Carlo Depletion Analysis

    Alrawash, S., Boravy, M., Park, C. J. & Kim, J. S., 31/12/2020, In: Journal of Nuclear Fuel Cycle and Waste Technology (JNFCWT). 18, 4, p. 481-496 16 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  49. Published

    Data-Driven Constitutive Model for the Inelastic Response of Metals: Application to 316H Steel

    Tallman, A. E., Kumar, M. A., Castillo, A., Wen, W., Capolungo, L. & Tomé, C. N., 31/12/2020, In: Integrating Materials and Manufacturing Innovation. 9, 4, p. 339-357 19 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  50. Published

    Effect of volumetric energy density on microstructure and tribological properties of FeCoNiCuAl high-entropy alloy produced by laser powder bed fusion

    Ren, Y., Liang, L., Shan, Q., Cai, A., Du, J., Huang, Q., Liu, S., Yang, X., Tian, Y. & Wu, H., 31/12/2020, In: Virtual and Physical Prototyping. 15, S1, p. 543-554 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  51. Published

    Proton Bunch Self-Modulation in Plasma with Density Gradient

    AWAKE Collaboration, 31/12/2020, In: Physical review letters. 125, 26, 7 p., 264801.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  52. Published

    Study on Ultrasound Welding Process of Aluminum/Copper Dissimilar Metals

    Tang, M., Zhang, P., Yu, Z., Shi, H., Li, S., Wu, D., Yan, H., Ye, X., Wang, F. & Tian, Y., 31/12/2020, In: Physics of Metals and Metallography. 121, 14, p. 1400-1410 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  53. 2021
  54. Published

    1.55μm Efficient Temperature Insensitive GaSb-based Lasers for Telecoms Applications

    Bentley, M., 2021, Lancaster University. 165 p.

    Research output: ThesisDoctoral Thesis

  55. Unpublished

    A Reynolds-averaged Navier-Stokes computational analysis of a novel multi-nozzle annular air-jet pump

    Morrall, A., 2021, (Unpublished) Lancaster University. 347 p.

    Research output: ThesisDoctoral Thesis

  56. Published

    Ab initio simulations of the degradation of biodegradable batteries

    Deacon, B., 2021, Lancaster University. 187 p.

    Research output: ThesisMaster's Thesis

  57. Published

    An Experimental and CFD Based Analysis on Industrial Biomass Drying Production

    Pryce, M., 2021, Lancaster University. 249 p.

    Research output: ThesisMaster's Thesis

  58. Unpublished

    Characterisation of cementitious composites with green two-dimensional (2D) nanomaterial produced from sugar industry waste

    Huang, B., 2021, (Unpublished) Lancaster University. 296 p.

    Research output: ThesisDoctoral Thesis

  59. Published

    Design and characterization of meander line slow wave structures for W-band space traveling wave tubes

    Socuellamos, J., 2021, Lancaster University. 204 p.

    Research output: ThesisDoctoral Thesis

  60. Unpublished

    Development of Bioactive Composites for Maxillofacial (Orbital Floor) Fracture Repair and Regeneration

    Alhamoudi, F., 2021, (Unpublished) Lancaster University. 351 p.

    Research output: ThesisDoctoral Thesis

  61. Published
  62. Unpublished

    Engineering FEA Sintering Model Development for Metal Supported SOFCs

    Chatzimichail, R., 2021, (Unpublished) Lancaster University. 273 p.

    Research output: ThesisDoctoral Thesis

  63. Unpublished

    In situ mechanical analysis of sludge in hazardous environments

    Fried, T., 2021, (Unpublished) Lancaster University. 213 p.

    Research output: ThesisDoctoral Thesis

  64. Published

    Integrated optimisation for dynamic modelling, path planning and energy management in hybrid race vehicles

    Reeves, K., 2021, Lancaster University. 268 p.

    Research output: ThesisDoctoral Thesis

  65. Published

    Modeling in Crystal Plasticity: from theory to application

    Wang, W. & Wen, W., 2021, Encyclopedia of Materials: Metals and Alloys. Elsevier, p. 552-560 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNEntry for encyclopedia/dictionary

  66. Published

    Operation of Multiple Accelerating Structures in an X-Band High-Gradient Test Stand

    Millar, L., 2021, Lancaster University. 223 p.

    Research output: ThesisDoctoral Thesis

  67. Published

    Optimisation of PBG-Waveguides for THz-Driven Electron Acceleration

    Vint, A., 2021, Lancaster University. 200 p.

    Research output: ThesisDoctoral Thesis

  68. Published

    Optimising Detecting Geometry for Improved Pulse Shape Discrimination Performance in Plastic Scintillation

    Parker, A. & Aspinall, M., 2021. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  69. Published

    Recovery of added value compounds from beetroot juice industry wastes

    Kottaridis, S., 2021, Lancaster University. 184 p.

    Research output: ThesisMaster's Thesis

  70. Published

    A comparative production and characterisation of fast pyrolysis bio-oil from Populus and Spruce woods

    Echresh Zadeh, Z., Abdulkhani, A. & Saha, B., 1/01/2021, In: Energy. 214, 12 p., 118930.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  71. Published

    An Efficient Triangle Mesh Slicing Algorithm for All Topologies in Additive Manufacturing

    King, B., Rennie, A. & Bennett, G. R., 1/01/2021, In: International Journal of Advanced Manufacturing Technology. 112, p. 1023-1033 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  72. Published

    Analysis of Multiwalled Carbon Nanotubes Porosimetry And Their Thermal Conductivity with Ionic Liquid-Based Solvents

    Bakthavatchalam, B., Habib, K., Shaik, N. B., Ginta, T. L. & Saidur, R., 1/01/2021, In: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 77, 2, p. 63-75 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  73. Published

    Boosting the oxygen evolution activity in non-stoichiometric praseodymium ferrite-based perovskites by A site substitution for alkaline electrolyser anodes

    Ward, S., Isaacs, M. A., Gupta, G., Mamlouk, M. & Pramana, S. S., 1/01/2021, In: Sustainable Energy & Fuels. 5, p. 154-165 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  74. Published

    Effect of zinc on the fracture behavior of galvanized steel/6061 aluminum alloy by laser brazing

    Zhang, P., Shi, H., Tian, Y., Yu, Z. & Wu, D., 1/01/2021, In: Welding in the World. 65, p. 13–22 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  75. Published

    Grain Secondary Recrystallisation in Advanced Gas Cooled Reactor Fuel Cladding: Characterisation and Modelling

    Degueldre, C., Wilbraham, R., Fahy, J. & Green, S., 1/01/2021, In: Journal of Nuclear Materials. 543, 14 p., 152633.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  76. Published

    Molecular dynamics simulation of mechanical properties of intercalated GO/C-S-H nanocomposites

    Fan, D., Yang, S. & Saafi, M., 1/01/2021, In: Computational Materials Science. 186, 11 p., 110012.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  77. Published

    NADH regeneration: a case study of Pt-catalyzed NAD+ reduction with H2

    Saba, T., Li, J., Burnett, J. W. H., Howe, R. F., Kechagiopoulos, P. N. & Wang, X., 1/01/2021, In: ACS Catalysis. 11, 1, p. 283–289 7 p.

    Research output: Contribution to Journal/MagazineLetterpeer-review

  78. Published

    Numerical simulation of the performance of a centrifugal pump with a semi-open impeller under normal and cavitating conditions

    Mousmoulis, G., Kassanos, I., Aggidis, G. & Anagnostopoulos, I., 1/01/2021, In: Applied Mathematical Modelling. 89, 2, p. 1814-1834 21 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  79. Published

    Research on weld formation mechanism of laser-MIG arc hybrid welding with butt gap

    Huang, H., Zhang, P., Yan, H., Liu, Z., Yu, Z., Wu, D., Shi, H. & Tian, Y., 1/01/2021, In: Optics and Laser Technology. 133, 13 p., 106530.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  80. Published

    Structure–selectivity relationship of a zirconia-based heterogeneous acid catalyst in the production of green mono- and dioleate product

    Kong, P. S., Pérès, Y., Cognet, P., Senocq, F., Daud, W. M. A. W., Aroua, M. K., Ahmad, H., Sankaran, R. & Show, P. L., 1/01/2021, In: Clean Technologies and Environmental Policy. 23, p. 19-29 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  81. Published

    The effect of joint configuration on the strength and stress distributions of dissimilar adhesively bonded joints

    Yousefi Kanani, A., Hou, X. & Ye, J., 1/01/2021, In: Engineering Structures. 11 p., 111322.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  82. Published

    Experimental study of extended timescale dynamics of a plasma wakefield driven by a self-modulated proton bunch

    AWAKE Collaboration, 5/01/2021, In: Physical Review Accelerators and Beams. 24, 1, 13 p., 011301.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  83. Published

    A prototype telepresence robot for use in the investigation of ebola and lassa virus threatened villages in Nigeria

    Monk, S., Jorgensen, E., McCulloch, A., Peacock, R., Sangprachatanaruk, I., Azeta, J., Bolu, C. A. & Taylor, C. J., 7/01/2021, Proceedings of the 27th International Conference on Systems Engineering, ICSEng 2020. Selvaraj, H., Chmaj, G. & Zydek, D. (eds.). Springer, p. 34-48 15 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  84. Published

    Process optimization and kinetics of microwave assisted transesterification of crude glycerol for the production of glycerol carbonate

    Teng, W. K., Yusoff, R., Aroua, M. K. & Ngoh, G. C., 7/01/2021, In: Sustainable Energy and Fuels. 5, 1, p. 274-282 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  85. Published

    ANN Modeling of Thermal Conductivity and Viscosity of MXene-Based Aqueous IoNanofluid

    Parashar, N., Aslfattahi, N., Yahya, S. M. & Saidur, R., 11/01/2021, In: International Journal of Thermophysics. 42, 2, 24 p., 24.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  86. Published

    High yield super-hydrophobic carbon nanomaterials using cobalt/iron co-catalyst impregnated on powder activated carbon

    Betar, B. O., Alsaadi, M. A., Chowdhury, Z. Z., Aroua, M. K., Mjalli, F. S. & Niazi, M. D. M., 11/01/2021, In: Processes. 9, 1, 19 p., 134.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  87. Published

    High-Fidelity Calculation of Floating Offshore Wind Turbines Under Pitching Motion

    Ortolani, A., Persico, G., Drofelnik, J., Jackson, A. & Campobasso, S., 11/01/2021, ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition: Wind Energy. The American Society of Mechanical Engineers, Vol. 12. 16 p. GT2020-15552

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  88. Published

    Integration of computational fluid-particle dynamics techniques for the instantaneous estimation of particle erosion damage on axial fan blade sections

    Castorrini, A., Venturini, P. & Corsini, A., 11/01/2021, Volume 1. Aircraft Engine; Fans and Blowers. American Society of Mechanical Engineers (ASME), 9 p. GT2020-15379. (Proceedings of the ASME Turbo Expo; vol. 1).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  89. Published

    Mechanistic insights into carbon dioxide utilization by superoxide ion generated electrochemically in ionic liquid electrolyte

    Halilu, A., Hayyan, M., Aroua, M. K., Yusoff, R. & Hizaddin, H. F., 14/01/2021, In: Physical Chemistry Chemical Physics. 23, 2, p. 1114-1126 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  90. Published

    A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings

    Yuan, W., Li, R., Chen, Z., Gu, J. & Tian, Y., 15/01/2021, In: Surface and Coatings Technology. 405, 13 p., 126582.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  91. Published

    Fabrication, microstructure and micromechanical properties of Fe-based metallic glass coating manufactured by laser

    Zhang, P., Zhang, Q., Yan, H., Yu, Z., Yang, J., Chen, J., Wu, D., Shi, H., Tian, Y., Ma, S. & Lei, W., 15/01/2021, In: Surface and Coatings Technology. 405, 14 p., 126726.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  92. Published

    COTS vision system, radiation sensor and 6 DoF robot for use in identifying radiologically uncharacterised objects

    Monk, S., Cheneler, D., West, C., Bandala Sanchez, M., Montazeri, A., Dixon, N. & Taylor, C. J., 21/01/2021, 2020 Australian and New Zealand Control Conference (ANZCC). IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  93. Published

    Unknown and time-varying time delays in the modelling and control of hydraulic actuators: literature review

    Albrecht, O. & Taylor, C. J., 21/01/2021, 2020 Australian and New Zealand Control Conference (ANZCC). IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  94. Published

    Unmanned Aerial Systems: Autonomy, Cognition and Control

    Montazeri, A., Can, A. & Imran, I., 21/01/2021, Unmanned Aerial Systems: Theoretical Foundation and Applications. Koubaa, A. & Taher Azar, A. (eds.). Elsevier, p. 47-80 34 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  95. Published

    Recent Catalytic Advances in Hydrotreatment Processes of Pyrolysis Bio-Oil

    Bagnato, G., Sanna, A., Paone, E. & Catizzone, E., 23/01/2021, In: Catalysts. 11, 2, p. 1-19 19 p., 157.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  96. Published

    Recent Development of Substrate Edge Antennas and Arrays for Millimeter-Wave Communication

    Wang, L. & Yin, X., 25/01/2021, 2020 International Symposium on Antennas and Propagation (ISAP). IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  97. Published

    Optimization of thermophysical and rheological properties of mxene ionanofluids for hybrid solar photovoltaic/thermal systems

    Bakthavatchalam, B., Habib, K., Saidur, R., Aslfattahi, N., Yahya, S. M., Rashedi, A. & Khanam, T., 27/01/2021, In: Nanomaterials. 11, 2, 28 p., 320.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  98. Published
  99. Published

    An electrochemical label-free DNA impedimetric sensor with AuNP-modified glass fiber/carbonaceous electrode for the detection of HIV-1 DNA

    Yeter, E., Şahin, S., Caglayan, M. O. & Üstündağ, Z., 31/01/2021, In: Chemical Papers. 75, 1, p. 77-87 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  100. Published

    Bio-electrochemical treatment of wastewater with high ammonium concentration

    Mousavi, S. A., Ibrahim, S., Aroua, M. K., Mahmoudi, A. & Darvishi, P., 31/01/2021, In: Desalination and Water Treatment. 211, p. 99-104 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  101. Published

    Drive cycle energy efficiency of fuel cell/supercapacitor passive hybrid vehicle system

    Xun, Q., Liu, Y., Huang, X., Grunditz, E. A., Zhao, J. & Zhao, N., 31/01/2021, In: IEEE Transactions on Industry Applications. 57, 1, p. 894-903 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  102. Published

    Electrochemical impedimetric detection of kanamycin using molecular imprinting for food safety

    Işık, D., Şahin, S., Caglayan, M. O. & Üstündağ, Z., 31/01/2021, In: Microchemical Journal. 160, Part B, 105713.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

Back to top