Home > Research > School of Engineering > Publications & Outputs

Research

View graph of relations

School of Engineering

5701 - 5800 out of 6,455Page size: 100
RSS feed of this list
  1. 2001
  2. Unpublished

    Technological Developments on Small Hydro.(Presentation)

    Aggidis, G. A., 05/2001, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Speech

  3. Published

    The role of calcium in ABA-induced gene expression and stomatal movements.

    Webb, A. A. R., Larman, M. G., Montgomery, L. T., Taylor, J. E. & Hetherington, A. M., 05/2001, In: Plant Journal. 26, 3, p. 351-362 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Unpublished

    Sky-map at 38.2MHz as measured by IRIS

    Marple, S. R., 9/04/2001, (Unpublished). 12 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Speech

  5. Published

    Some failure modes of four clinical bone cements

    Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 1/04/2001, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 215, 4, p. 359-366 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    Statistical wear analysis of PA-6/UHMWPE alloy, UHMWPE and PA-6.

    Liu, C. Z., Ren, L. Q., Tong, J., Joyce, T. J., Green, S. M. & Arnell, R. D., 04/2001, In: Wear. 249, 1-2, p. 31-36 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Drought-induced guard cell signal transduction involves sphingosine-1-phosphate.

    Ng, C. K.-Y., Carr, K., McAinsh, M., Powell, B. & Hetherington, A. M., 29/03/2001, In: Nature. 410, 6828, p. 596-599 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    Electroforming of Rapid Prototyping Mandrels for Electro-Discharge Machining Electrodes

    Rennie, A. E. W., Bocking, C. E. & Bennett, G. R., 19/03/2001, In: Journal of Materials Processing Technology. 110, 2, p. 186-196 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    Recovery of the carrier signal from the modulated input signal.

    Markarian, G. (Inventor) & Markarian, G. (Patent applicant), 1/03/2001, Patent No. 6208201

    Research output: Patent

  10. Published

    The ups and downs of calcium signalling in guard cells.

    Evans, N. H. & Hetherington, A. M., 6/02/2001, In: Current Biology. 11, 3, p. R92-R94

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. Published

    Decay rate of edge effects in cross-ply-laminated hollow cylinders

    Ye, J. Q., 02/2001, In: International Journal of Mechanical Sciences. 43, 2, p. 455-470 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  12. Published

    3-D simulation of asymmetric multistage depressed collectors with secondary electron emission effects for high efficiency space TWTs

    Ghosh, T. K. & Carter, R. G., 1/01/2001, In: ITG-Fachbericht. 165, p. 67-71 5 p.

    Research output: Contribution to Journal/Magazine › Conference article › peer-review

  13. Published

    Computer simulation of intermodulation distortion in traveling wave tube amplifiers.

    Carter, R. G., Bosch, W., Srivastava, V. & Gatti, G., 01/2001, In: IEEE Transactions on Electron Devices. 48, 1, p. 178-180 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    Data-based modelling and proportional integral plus (PIP) control of nitrate in an activated sludge benchmark

    Ghavipanjeh, F., Taylor, C. J., Young, P. C. & Chotai, A., 01/2001, In: Water Science and Technology. 44, 1, p. 87-94 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    "Pultruded GRP frames: simple (conservative) approach to design, a rational alternative and research needs for improved design".

    Turvey, G. J., 2001, Proceedings of the ASCE sponsored workshop on composites in construction: a reality.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  16. Published

    3-D simulation of asymmetric multi-stage depressed collectors with secondary electron emission effects for high efficiency space TWTs.

    Ghosh, T. K. & Carter, R. G., 2001, Proceedings of a conference on displays and vacuum electronics.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  17. Published

    3DB challenge for DfT, DfM, DOT and BIST integration into analogue and mixed signal ICs.

    Lechner, A., Burbidge, M. J., Richardson, A. M. D. & Hermes, B., 2001, Proceedings of the 2nd Latin-American test workshop (LATW ’01). p. 194-199 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  18. Published

    A failure mode analysis of a 6-bit folding ADCs.

    Lechner, A., Richardson, A. M. D., Burbidge, M. & Hermes, B., 2001, Proceedings of the 7th IEEE international mixed-signal testing workshop (IMSTW ’01). p. 19-23 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  19. Published

    A high speed, multi-frequency impedance analysing node.

    Dickinson, S. J. & Peyton, A. J., 2001, Proceedings of the 2nd world congress on industrial process tomography. p. 502-510 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  20. Published

    An improved equivalent circuit model of folded-waveguide slow-wave structures.

    Carter, R. G., 2001, Proceedings of a conference on displays and vacuum electronics.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  21. Published

    Biotransformation of alkenes by the obligate anaerobic M. thermoactica.

    Tan, A. W., Li, H., Williams, P., Noble, L. M., Mather, P., Gardiner, J. M. & Stephens, G. M., 2001, Proceedings of the international conference on Biotransformation, Darmstadt (Germany), September 2nd-7th, 2001. Darmstadt

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  22. Published

    Compression failure mode of two CMW bone cements

    Green, S., Liu, C., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 2001, European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001.. London: European Society for Biomaterials, p. P51

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  23. Published

    Computer modelling of microwave tubes - a review.

    Carter, R. G., 2001, Proceedings of IVEC ’2001.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  24. Published

    Design of the pitch profile for high linearity helix TWT amplifiers.

    Jenkins, R. O. & Carter, R. G., 2001, Proceedings of a conference on displays and vacuum electronics.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  25. Published

    Detection of phase transformation during steel processing using EM sensors.

    Papaelias, M. P., Davis, C. L., Strangwood, M., Binns, R. & Peyton, A. J., 2001, Proceedings of the 1st international seminar in progress in innovative manufacturing engineering (PRIME).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  26. Published

    Detection of phase transformation in hot strip steel samples using a multi-frequency electromagnetic impedance measuring node.

    Binns, R., Dickinson, S. J. & Peyton, A. J., 2001, Proceedings of the 11th conference on sensors and their applications. p. 45-50 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  27. Published

    Effects of imperfections on periodic permanent magnet focussing of electron beams.

    Carter, R. G. & MacGregor, A., 2001, Proceedings of IVEC ’2001.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  28. Published

    Effects of microstructural variability on the measurement of ferrite transformation using EM sensors.

    Papaelias, M. P., Davis, C. L., Strangwood, M., Binns, R. & Peyton, A. J., 2001, Proceedings of a materials research conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  29. Published

    Effects of temperature on the structural integrity of bolted joints in pultrusions.

    Turvey, G. J. & Wang, P., 2001, In: Composites in constructions. p. 171-176 6 p.

    Research output: Contribution to Journal/Magazine › Journal article

  30. Published

    Elasto-plastic large deflection of uniformly loaded sector plates.

    Turvey, G. J. & Salehi, M., 2001, Proceedings of the 3rd international conference on thin-walled structures. p. 631-640 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  31. Published

    Evaluation of the structural performance of box beams fabricated from a novel system of pultruded profiles.

    Turvey, G. J., 2001, In: Composites in constructions. p. 803-808 6 p.

    Research output: Contribution to Journal/Magazine › Journal article

  32. Published

    Finite element analysis to support component level fault modelling for MEMS.

    Reichenbach, R., Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2001, Proceedings of SPIE design, test, integration and packaging of MEMS symposium. Vol. 4408. p. 147-158 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  33. Published

    Foam formation in low expansion fire fighting equipment

    Rogers, L., 2001, Lancaster University. 210 p.

    Research output: Thesis › Doctoral Thesis

  34. Published

    FURTHER STUDY OF ALLYL ETHERS AND RELATED COMPOUNDS AS TRANSFER AGENTS IN RADICAL POLYMERIZATIONS.

    Bevington, J. C., Huckerby, T. N., Hunt, B. J. & Jenkins, A. D., 2001, In: Journal of Macromolecular Science Part A Pure and Applied Chemistry. 38, 10, p. 981-990 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  35. Published

    Generation of component level fault models for MEMS.

    Rosing, R., Reichenbach, R., Richardson, A. M. D. & Dorey, A. P., 2001, Proceedings of the 7th international mixed-signal testing workshop (IMSTW ’01). p. 40-45 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  36. Published

    Growth of needle and plate shaped particles: Theory for small supersaturations, maximum velocity hypothesis

    Rivera-Díaz-del-Castillo, P. E. J. & Bhadeshia, H. K. D. H., 2001, In: Materials Science and Technology. 17, 1, p. 25-29 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    How size affects the mobility of THR wear debris

    Green, S., Elfick, A. P. D. & Liu, C., 2001, European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001.. London: European Society for Biomaterials, p. T41

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  38. Published

    Hydrogen and disorder in diamond-like carbon

    Kleinsorge, B., Rodil, S. E., Adamopoulos, G., Robertson, J., Grambole, D. & Fukarek, W., 2001, In: Diamond and Related Materials. 10, 3-7, p. 965-969 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  39. Published

    Image reconstruction for electromagnetic inductance tomography employing a parameterized finite-element-based forward model.

    Bissessur, Y. & Peyton, A. J., 2001, In: Proceedings of SPIE. 4188, p. 261-272 12 p.

    Research output: Contribution to Journal/Magazine › Journal article

  40. Published

    Imaging steel profiles within a pouring nozzle.

    Binns, R., Lyons, A. R. A. & Peyton, A. J., 2001, Proceedings of the 2nd world congress on industrial process tomography. p. 138-147 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  41. Published

    Improved 3-D simulation of multistage depressed collectors for high efficiency travelling wave tubes.

    Ghosh, T. K. & Carter, R. G., 2001, Proceedings of IVEC ’2001.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  42. Published

    Innovative electronic analysis device for nuclear fuel reprocessing.

    Ash, D. C., Joyce, M. J., Garnham, G. W., Barnes, C. & Port, S. N., 2001, Proceedings of the 9th international conference on nuclear engineering (ICONE9).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  43. Published

    Interfacial shear transfer of RC beams strengthened by bonded composite plates

    Ye, J. Q., 2001, In: Cement and Concrete Composites. 23, 4-5, p. 411-417 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  44. Published

    Measurement of the ferrite-austenite phase balance during transformation in steel using electromagnetic sensors.

    Papaelias, M. P., Davis, C. L., Strangwood, M., Binns, R. & Peyton, A. J., 2001, Proceedings of the XVIIth national panhellenic conference in solid state physics.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  45. Published

    Monte Carlo simulation of a spherical spectroscopy instrument for fission reactor environments.

    Benson, C., Winsby, A., Joyce, M. J. & Silvie, J., 2001, Proceedings of the MCNEGS meeting.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  46. Published

    Monte-Carlo Calculation of the Response Functions for Two Prototype Cosmic Neutron Metrology Instruments.

    Benson, C., Joyce, M. J., Winsby, A. & Silvie, J., 2001.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  47. Published

    Nuclear technology – the engineering perspective.

    Joyce, M. J. & Seward, D. W., 2001, Proceedings of the nuclear education and training forum.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  48. Published

    Optimisation of C=C double bond reductions using Clostridium sporogenes.

    Li, H., Noble, L., Mather, P., Hatziantonious, D., Law, Z., Vasiliki, K., Gardiner, J. M. & Stephens, G., 2001, Proceedings of the international conference on Biotransformation, Darmstadt (Germany), September 2nd-7th, 2001. Darmstadt, p. 312

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  49. Published

    Repeater insertion to minimise delay in coupled interconnects.

    Pamunuwa, D. B. & Tenhunen, H., 2001, Fourteenth International Conference on VLSI Design, 2001.. Bangalore, India: IEEE, p. 513-517 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  50. Published

    Short circuit faults in state-of-the-art ADCs – are they hard or soft?

    Lechner, A., Richardson, A. M. D. & Hermes, B., 2001, 10th Asian Test Symposium : proceedings : 19-21 November, 2001, Kyoto, Japan. IEEE Computer Society, p. 417-422 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  51. Published

    Simple digital only test approach for embedded charge-pump phase-locked loops.

    Burbidge, M. & Richardson, A. M. D., 2001, In: Electronics Letters. 37, 22, p. 1318-1319 2 p.

    Research output: Contribution to Journal/Magazine › Journal article

  52. Published

    Single bolt tension joints in pultruded GRP material – effect of elevated temperature on failure loads and strengths and joint efficiency.

    Turvey, G. J. & Wang, P., 2001, Proceedings of the BSSM conference on strain measurement in the 21st century. p. 20-23 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  53. Published

    Study and applications of a Bounding Method in stability analysis of Stiffened composite aerospace panels

    Ye, J., 2001, Solids, structures and coupled problems in engineering : : proceedings of the 2nd European Conference on Computational Mechanics 26-29 June 2001, Cracow Poland. Waszczyszyn , Z. & Pamin, J. (eds.). Cracow: Cracow University of Technology

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  54. Published

    Teaching safety – issues of course design and delivery.

    Seward, D. W. & Joyce, M. J., 2001, Proceedings of a safety critical systems symposia.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  55. Published

    Test techniques for embedded charge pump phase-locked loops: problems, current BIST techniques and alternative suggestions.

    Burbidge, M., Richardson, A. M. D. & Lechner, A., 2001, Proceedings of the 7th IEEE international test workshop. p. 97-102 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  56. Published

    The absence of nanometre sized UHMWPE wear particles retrieved from ex-vivo tissue

    Green, S., Elfick, A. P. & Unsworth, A., 2001, Trans 4th Combined meeting Orthopaedic Research Societies of the USA, Europe Canada and Japan. Chicago, Ill. : Orthopaedic research society, p. 93 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  57. Published

    THE EFFECTS OF ALLYL ETHERS UPON RADICAL POLYMERIZATIONS.

    Bevington, J. C., Huckerby, T. N., Hunt, B. J. & Jenkins, A. D., 2001, In: Journal of Macromolecular Science Part A Pure and Applied Chemistry. 38, 7, p. 627-640 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  58. Published

    The exploitation of low-head hydropower by pressure interchange with air, using siphons.

    French, M. J. & Widden, M. B., 2001, In: Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. 215, 2, p. 223-230 8 p.

    Research output: Contribution to Journal/Magazine › Journal article

  59. Published

    The friction and lubrication of alumina-on-alumina total hip prostheses - The effect of radial clearance and wear testing.

    Scholes, S. C., Green, S. M. & Unsworth, A., 2001, In: Key Engineering Materials. 218-220, p. 535-540 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  60. Published

    The Micro-Optical Ring Electrode: development of a thin ring electrode for spectrophotoelectrochemistry

    Boxall, C., Andrieux, F., Xiao, S. & O'Hare, D., 2001, Chemical and Biological Sensors and Analytical Methods II. Butler, M. A., Vanysek , P. & Yamazoe , N. (eds.). Pennington, New Jersey: ELECTROCHEMICAL SOCIETY INC, p. 531-543 13 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  61. Published

    The use of simulation in the economic analysis of robotised construction tasks.

    Seward, D. W., Zied, K. & Riehl, J., 2001, Proceedings of the 18th international symposium on robotics in construction. p. 265-270 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  62. Published

    Theory for growth of spherical precipitates with capillarity effects

    Rivera-Díaz-del-Castillo, P. E. J. & Bhadeshia, H. K. D. H., 2001, In: Materials Science and Technology. 17, 1, p. 30-32 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  63. Published

    Towards a better understanding of failure modes and test requirements of ADCs.

    Lechner, A., Richardson, A. M. D. & Hermes, B., 2001, Proceedings of a conference: automation and test in Europe (DATE ’01). p. 803

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  64. Published

    Transport across a normal-superconducting interface with coulomb interactions: a novel probe of electron-electron interactions in the normal metal.

    Dolby, P., Seviour, R. & Lambert, C. J., 2001, In: Journal of Physics: Condensed Matter. 13, p. L147-L152

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  65. Published

    Unique broad-spectrum neutron sensing instrument.

    Weaver, J. A., Joyce, M. J., Peyton, A. J., Roskell, J. & Armishaw, M. J., 2001, In: Review of Scientific Instruments. 72, 4, p. 2043-2047 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  66. Published

    Use of electron bunching diagrams for the design of pitch profiles in helix TWTs.

    Jenkins, R. O. & Carter, R. G., 2001, Proceedings of IVEC ’2001.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  67. 2000
  68. Published

    Design of helix slow-wave structures for high efficiency TWTs.

    Srivastava, V., Carter, R. G., Ravinder, B., Sinha, A. K. & Joshi, S. N., 12/2000, In: IEEE Transactions on Electron Devices. 47, 12, p. 2438-2443 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  69. Published

    Experimental and computed natural frequencies of square pultruded GRP plates: effects of anisotropy, hole size ratio and edge support conditions.

    Turvey, G. J., Mulcahy, N. & Widden, M. B., 12/2000, In: Composite Structures. 50, 4, p. 391-403 13 p.

    Research output: Contribution to Journal/Magazine › Journal article

  70. Published

    Neutron detection at the extremes of sensitivity in the cosmic environment.

    Benson, C., Joyce, M. J., O'Connell, B. & Silvie, J., 12/2000, In: IEEE Transactions on Nuclear Science. 47, 6 Part, p. 2417-2422 6 p.

    Research output: Contribution to Journal/Magazine › Journal article

  71. Published

    Hydropower developments : new projects and rehabilitation / organized by the Fluid Machinery Committee of the Power Industries Division of the Institution of Mechanical Engineers (IMechE).

    Aggidis, G. A., 30/11/2000, London: Professional Engineering Pub. for the Institution of Mechanical Engineers. 99 p. (IMechE seminar publication)

    Research output: Book/Report/Proceedings › Book

  72. Published

    Analysis of high-efficiency multistage depressed collectors based on the 3-D finite-element method

    D'Agostino, S. & Paoloni, C., 20/11/2000, In: Microwave and Optical Technology Letters. 27, 4, p. 275-278 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  73. Published

    Electro-Activation of Granular Carbon from Olive Mill Solid Residue

    Aiouache, F., Lounici, H., Belhocine, D., Grib, H., Piron, D. & Mameri, N., 1/11/2000, In: Environmental Technology. 21, 11, p. 1215-1222 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  74. Published

    Electroforming of a Thermojet Master Pattern for use as an Electro-Discharge Machine Electrode

    Bocking, C., Rennie, A., Bennett, G. & Lewis, N., 10/2000, Time Compression Technologies 2000 Conference: Proceedings of. Rapid News Publications PLC, p. 151-156 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  75. Published

    Safety analysis of autonomous excavator functionality.

    Seward, D. W., Pace, C., Morrey, R. & Sommerville, I., 10/2000, In: Reliability Engineering and System Safety. 70, 1, p. 29-39 11 p.

    Research output: Contribution to Journal/Magazine › Journal article

  76. Published

    A feasibility study into the use of wavelet transform in partial discharge analysis.

    Ma, X., Zhou, C. & Kemp, I. J., 09/2000. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  77. Published

    State space control system design based on non-minimal state-variable feedback: further generalisation and unification results.

    Taylor, C. J., Chotai, A. & Young, P. C., 09/2000, In: International Journal of Control. 73, 14, p. 1329-1345 17 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  78. Published

    Calcium signalling in stomatal cell guards.

    McAinsh, M., Gray, J. E., Hetherington, A. M., Leckie, C. P. & Ng, C. K.-Y., 08/2000, In: Biochemical Society Transactions. 28, 4, p. 476-481 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  79. Published

    Closure to “Buckling Analysis of Angle‐Ply Multilaminated Long Hollow Cylinders”

    Ye, J. Q., 08/2000, In: Journal of Engineering Mechanics. 126, 8, p. 887-887 1 p.

    Research output: Contribution to Journal/Magazine › Editorial › peer-review

  80. Published

    HEMT-HBT matrix amplifier

    Paoloni, C., 08/2000, In: IEEE Transactions on Microwave Theory and Techniques. 48, 8, p. 1308-1312 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  81. Published

    Micro-mechanical analysis of splitting failure in concrete reinforced with fiber reinforced plastic rods

    Ye, J. Q. & Wu, Z. J., 08/2000, In: Cement and Concrete Composites. 22, 4, p. 243-251 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  82. Published

    Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models

    Bocking, C. E., Rennie, A. & Bennett, G. R., 08/2000, 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin, p. 469-477 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  83. Published

    Simultaneous measurements of high-frequency pump-enhanced airglow and ionospheric temperatures at auroral latitudes

    Leyser, T. B., Gustavsson, B., Brändström, B. U. E., Steen, A., Honary, F., Rietveld, M. T., Aso, T. & Ejiri, M., 08/2000, In: Advances in Polar Upper Atmosphere Research. 14, p. 1-11 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  84. Published

    A finite-element 3-D method for the design of TWT collectors

    D'Agostino, S. & Paoloni, C., 20/07/2000, In: Microwave and Optical Technology Letters. 26, 2, p. 119-122 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  85. Published

    Preparation of activated carbon from olive mill solid residue

    Mameri, N., Aiouache, F., Belhocine, D., Grib, H., Lounici, H., Piron, D. & Yahiat, Y., 1/07/2000, In: Journal of Chemical Technology and Biotechnology. 75, 7, p. 625-631 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  86. Published

    Electroforming of a Stereolithography Master Pattern for use as an Electro-Discharge Machine electrode

    Rennie, A., Bocking, C. E. & Bennett, G. R., 07/2000, Proceedings of the 33rd International MATADOR Conference: Formerly The International Machine Tool Design and Research Conference. Springer-Verlag, p. 301-306 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  87. Published

    Sensitivity analysis of TWT's small signal gain based on the effect of rod shape and dimensions

    D'Agostino, S., Emma, F. & Paoloni, C., 07/2000, In: IEEE Transactions on Electron Devices. 47, 7, p. 1457-1462 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  88. Published

    Effect of mechanical tolerance of T-shaped rods in a TWT based on a helix slow-wave structure

    D'Agostino, S. & Paoloni, C., 20/06/2000, In: Microwave and Optical Technology Letters. 25, 6, p. 393-395 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  89. Published

    Magnetron frequency twinning.

    Carter, R. G., Ball, E. M. & Brady, M. B., 06/2000, In: IEEE Transactions on Plasma Science. 28, 3, p. 905-909 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  90. Published

    Surface Flatness Measurement in Stereolithography

    Male, J. C., Rennie, A. & Bennett, G. R., 06/2000, The Eighth International Conference on Rapid Prototyping: Proc. of. The University of Dayton, p. 111-117 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  91. Published

    Surface modification of PTFE by plasma treatment

    Liu, C., Arnell, R. D., Gibbons, A. R., Green, S. M., Ren, L. & Tong, J., 06/2000, In: Surface Engineering. 16, 3, p. 215-217 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  92. Published

    Centrifugal pumps : the state of the art and new opportunities / Institution of Mechanical Engineers (Great Britain). Fluid Machinery Committee.

    Aggidis, G. A., 18/05/2000, London: Institution of Mechanical Engineers.

    Research output: Book/Report/Proceedings › Book

  93. Published

    3D analysis of stress transfer in the micromechanics of fiber reinforced composites by using an eigen-function expansion method

    Wu, Z. J., Ye, J. Q. & Cabrera, J. G., 05/2000, In: Journal of the Mechanics and Physics of Solids. 48, 5, p. 1037-1063 27 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  94. Published

    A novel technique for the detailed size characterization of wear debris.

    Elfick, A. P., Green, S. M., Pinder, I. M. & Unsworth, A., 05/2000, In: Journal of Materials Science: Materials in Medicine. 11, 5, p. 267-271 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  95. Published

    Accurate vehicular positioning using a DAB-GSM hybrid system

    Rooney, S., Chippendale, P., Choony, R., Roux, C. L. & Honary, B., 05/2000, Vehicular Technology Conference Proceedings, 2000. VTC 2000-Spring Tokyo. 2000 IEEE 51st. Tokyo, Japan: IEEE, p. 97-101 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  96. Published

    Determination of the interaction impedance of helix slow-wave structures.

    Carter, R. G., 05/2000, International Vacuum Electronics Conference. California: IEEE, p. 2-2 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  97. Published

    Direct numerical simulation of the puffing phenomenon of an axisymmetric thermal plume

    Jiang, X. & Luo, K. H., 05/2000, In: Theoretical and Computational Fluid Dynamics. 14, 1, p. 55-74 20 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  98. Published

    Cytocompatibility evaluation of surface modified Ni-Ti shape memory alloy using the MTT assay

    Green, S. M., Grant, D. M. & Wood, J. V., 25/04/2000, In: Biomedical Engineering - Applications, Basis and Communications. 12, 2, p. 55-59 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  99. Published

    A study of an azonitrile containing a sizable fluorocarbon group.

    Bevington, J. C., Guyot, B., Huckerby, T. N., Hunt, B. J. & Jones, R., 04/2000, In: European Polymer Journal. 36, 4, p. 657-661 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  100. Published

    Modelling and control design for free air carbon dioxide enrichment (FACE) systems

    Taylor, C. J., Young, P. C., Chotai, A., Mcleod, A. & Glasock, A. R., 04/2000, In: Journal of Agricultural Engineering Research. 75, 4, p. 365-374 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  101. Published

    A simplified procedure to calculate the power gain definitions of FET's

    Paoloni, C., 03/2000, In: IEEE Transactions on Microwave Theory and Techniques. 48, 3, p. 470-474 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  102. Published

    Spatial direct numerical simulation of the large vortical structures in forced plumes

    Jiang, X. & Luo, K. H., 03/2000, In: Flow, Turbulence and Combustion. 64, 1, p. 43-69 27 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...54 55 56 57 58 59 60 61 ...65 Next

Back to top