Home > Research > Publications & Outputs >

Research

« Back

Find by keywords:

Engineering

301 - 400 out of 704Page size: 100
  1. Published

    Three-Dimensional Discrete Element Modeling of the Damage Behaviour of Cross-Ply Laminate under Low-Velocity Impact

    Yang, D., Tan, Y. Q., Ye, J. & Sheng, Y., 2009, In: Civil-Comp Proceedings. 91, Paper 191.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  2. Published

    Three-dimensional Modeling of Stress Transfer, Stiffness Degradation, failure and Transverse Cracking in Composite Laminates.

    Ye, J., 2009, Advances in Engineering Mechanics. Qin, Q.-H. & Sun, B. (eds.). Nova Science Publishers, Vol. 1. p. 127-165 39 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  3. Published

    Time Domain Analysis of Ultrasonic Wave Propagation Using an Electromagnetic Acoustic Transducer

    Thomas, S., Obayya, S., Pinto, D., Dulay, D., Balachandran, W. & Darwish, M., 2009, In: Sensors and Transducers Journal. 108, 9, p. 102-115 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    Transparent metal oxide thin-film transistors prepared by spray pyrolysis

    Bashir, A., Wöbkenberg, P., Smith, J., Adamopoulos, G., Bradley, D. & Anthopoulos, T., 2009.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  5. Published

    X-band crab cavities for the CLIC beam delivery system

    Burt, G., Ambattu, P., Dexter, A., Abram, T., Dolgashev, V., Tantawi, S. & Jones, R. M., 1/12/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  6. Published

    Efficient multiresolution time-domain analysis of arbitrarily shaped photonic devices

    Letizia, R. & Obayya, S. S. A., 12/2008, In: IET Optoelectronics. 2, 6, p. 241-253 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Modelling semi-rigid composite joints with precast hollowcore slabs in hogging moment region

    Fu, F., Lam, D. & Ye, J., 12/2008, In: Journal of Constructional Steel Research. 64, 12, p. 1408-1419 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    Multiresolution Time Domain Scheme for Dispersive Second Harmonic Generation Integrated Devices

    Letizia, R. & Obayya, S., 12/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  9. Unpublished

    Rapid Manufacturing Design Tools

    Smith, P. & Rennie, A., 12/2008, (Unpublished). 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  10. Published

    Stress analysis of cross-ply composite laminates with transverse cracks

    Yang, J., Ye, J. & Bao, Y., 12/2008, In: Mechanics of Composite Materials. 44, 6, p. 557-580 24 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. Published

    A Comprehensive Business Model for Rapid Manufactured Products

    Hasan, S. & Rennie, A., 10/2008, 19th International Symposium of the Danube-Adria-Association-for-Automation-and-Manufacturing - Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions. Vienna: DAAAM International, p. 591-592 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  12. Unpublished

    Consultancy and Support: Computer Aided Design & Engineering: (incorporating the Rapid Manufacturing North West & Sustainable Product Development sub-Projects) - Lancaster University Final Report

    Rennie, A., 10/2008, (Unpublished) N/A. 129 p.

    Research output: Book/Report/Proceedings › Commissioned report

  13. Published

    On the Analysis and Improvement of Yield for TWT Small-Signal Gain

    Paoloni, C., 10/2008, In: IEEE Transactions on Electron Devices. 55, 10, p. 2774-2778 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    Femtosecond laser micromachining of fibre Bragg gratings for simultaneous measurement of temperature and concentration of liquids

    Alemohammad, H., Toyserkani, E. & Pinkerton, A. J., 21/09/2008, In: Journal of Physics D: Applied Physics. 41, 18, p. - 9 p., 185101.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    Electronic state modification in laser deposited amorphous carbon films by the inclusion of nitrogen

    Miyajima, Y., Adamopoulos, G., Stolojan, V., Garcia-Caurel, E., Drévillon, B., Shannon, J. M. & Silva, S. R. P., 17/09/2008, In: Journal of Applied Physics. 104, 6, 9 p., 063701.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    Application of molecular electronics devices in digital circuit design.

    Lei, C., Pamunuwa, D. B., Bailey, S. & Lambert, C., 09/2008, Nano-Net Third International ICST Conference, NanoNet 2008, Boston, MA, USA, September 14-16, 2008, Revised Selected Papers. Cheng, M. (ed.). Berlin: Springer, p. 61-65 5 p. (Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  17. Published

    Pitch plane analysis of a twin-gas-chamber strut suspension

    Cao, D., Rakheja, S. & Su, C.-Y., 08/2008, In: Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 222, 8, p. 1313-1335 23 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    Component repair using laser direct metal deposition

    Pinkerton, A. J., Wang, W. & Li, L., 07/2008, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 222, 7, p. 827-836 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    High efficiency multiple beam klystron (MBK) cavity properties

    Lingwood, C., Carter, R. & Marchesin, R., 07/2008, Vacuum Electronics Conference, 2008. IVEC 2008. IEEE International. IEEE, p. 427-428 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  20. Published

    Simulations of field emission behaviour in carbon nanotubes based vacuum triode

    Paoloni, C., Brunetti, F., Riccitelli, R., Ulisse, G. & Di Carlo, A., 07/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  21. Published

    Design templates for consumer use in customising additive layer manufactured products

    Ariadi, Y. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 137-144 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  22. Published

    Development of an Additive Layer Manufacturing business model: creating an environment to support designers from concept to distribution

    Ariadi, Y., Hasan, S., Smith, P. & Rennie, A., 06/2008, Proceedings of 32nd Japan Rapid Prototyping Symposium. p. 79-84 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  23. Published

    Development of an Additive Layer Manufacturing Selection Tool for Rapid Manufacturing Applications

    Smith, P. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 69-79 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  24. Published

    Efficient Multiresolution Time Domain Analysis for Second Harmonic Generation Integrated Devices

    Letizia, R. & Obayya, S., 06/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  25. Published

    Encouraging Environmental Responsibility in Small Businesses

    Moss, J., Lambert, C. & Rennie, A., 06/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  26. Published

    Innovative vacuum device flip-cathode based on carbon nanotubes field emitters

    Riccitelli, R., Paoloni, C., Brunetti, F., Ulisse, G., Di Carlo, A., sessa, V., Terranova, M. L., Cirillo, M. & Orlanducci, S., 06/2008, First Mediterranean Photonic Conference. Italy

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  27. Unpublished

    The SME Carbon Game: Issues faced when developing a Carbon Footprint Toolkit for SMEs

    wrigley, S., Lambert, C. & Rennie, A., 06/2008, (Unpublished). 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  28. Published

    Virtual Trading System for Rapid Manufactured Products

    Hasan, S. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 127-135 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  29. Published

    Delivering Bio-Mems & Microfluidic Education Around Accessible Technologies

    Richardson, A., Liu, H., Koltsov, D., Rosing, R., Ryan, T. & Wooton, R., 28/05/2008, Proceedings of the 8th European Workshop on Microelectronics Education. EDA Publishing, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  30. Published

    Flip-cathode field emission vacuum triode for THz applications

    Riccitelli, R., Paoloni, C., Brunetti, F., Ulisse, G. & Di Carlo, A., 05/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  31. Published

    Fourth-order accurate sub-sampling for finite-difference analysis of surface plasmon metallic waveguides

    Hu, B., Sewell, P., Wykes, J., Vukovic, A. & Benson, T., 04/2008, In: Microwave and Optical Technology Letters. 50, 4, p. 995-1000 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    Oxidation-reduction reactions of simple hydroxamic acids and plutonium(IV) ions in nitric acid

    Carrott, M. J., Fox, O. D., LeGurun, G., JONES, C. J., Mason, C., Taylor, R., Andrieux, F. & Boxall, C., 31/03/2008, In: Radiochimica Acta. 96, 6, p. 333-343 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Published

    Accurate perfectly matched layer finite-volume time-domain method for photonic bandgap devices

    Pinto, D. & Obayya, S., 03/2008, In: IEEE Photonics Technology Letters. 20, 5, p. 339-341 3 p.

    Research output: Contribution to Journal/Magazine › Letter › peer-review

  34. Published

    Laser surface colouring of titanium for contemporary jewellery

    O'Hana, S., Pinkerton, A. J., Shoba, K., Gale, A. W. & Li, L., 03/2008, In: Surface Engineering. 24, 2, p. 147-153 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  35. Published

    New Design of Second Harmonic Generation Using Photonic Crystals

    Letizia, R. & Obayya, S., 03/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  36. Published

    Novel Multiresolution Time Domain Analysis for Photonic Devices

    Letizia, R. & Obayya, S., 03/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  37. Published

    Simplified solutions for the stress transfer in concrete beams bonded with FRP plates

    Yang, J., Ye, J. & Niu, Z., 02/2008, In: Engineering Structures. 30, 2, p. 533-545 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Published

    2D Analysis of Multimode Photonic Crystal Resonant Cavities with the Finite Volume Time Domain Method

    Pinto, D. & Obayya, S., 2008, In: Optical and Quantum Electronics. 40, 11-12, p. 875-890 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  39. Published

    A comparative study of single mode fibre laser and Nd:YAG laser welding of Ti-6Al-4V

    Chen, H.-C., Blackburn, J., Pinkerton, A. J., Li, L. & Hilton, P., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 163-168 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  40. Published

    A Dependable Microelectronic Peptide Synthesizer Using Electrode Data

    Richardson, A., Kerkhoff, H. G., Zhang, X., Mailly, F., Nouet, P. & Liu, H., 2008, In: VLSI Design. 2008, n/a, 9 p., 437879.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  41. Published

    A gas-free powder delivery system for 100% deposition efficiency in Direct Laser Deposition

    Wang, W., Pinkerton, A. J. & Li, L., 2008, Proceedings of the 27th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 415-423 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  42. Published

    A Novel Adaptive LDMOS Power Amplifier with Constant Efficiency for Wide Dynamic Power Levels Control

    Narendra, K., Mediano, A., Paoloni, C. & Limiti, E., 2008, 2008 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM DIGEST, VOLS 1-4. NEW YORK: IEEE, p. 1500-1503 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  43. Published

    Analytical model of semi-rigid composite joints with steel beams and precast hollowcore slabs.

    Lam, D., Ye, J. & Fu, F., 2008, Structures Congress 2007: Proceedings of the 2007 Structures Congress, Proceedings of the Research Frontiers Sessions of the 2007 Structures Congress, and Proceedings of the 2007 Forensic Engineering Track of the 2007 Structures Congress, and May 16-19, 2007, Long Beach, California. Lyons , R., Wallance , J. W. & Stovner, E. (eds.). ASCE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  44. Published

    Complex Envelope Alternating Direction Implicit Finite Difference Time Domain Analysis Of Ultra-Fast Photonic Bandgap Switches

    Selim, R., Pinto, D. & Obayya, S., 2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  45. Published

    Design and Computer Simulation of High Efficiency Broadband Parallel-Circuit Class E RF Power Amplifier with Reactance Compensation Technique

    Narendra, K., Prakash, C., Andrei, G., Paoloni, C. & Median, A., 2008, 2008 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM DIGEST, VOLS 1-4. NEW YORK: IEEE, p. 77-80 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  46. Published

    Direct diode laser deposition of functionally graded Ti-6AL-4V and inconel 718 components

    Shah, K., Pinkerton, A. J., Moat, R., Li, L. & Preuss, M., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 273-278 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  47. Published

    Direct laser deposited titanium with controlled porosity for bone tissue engineering

    Pinkerton, A. J., Paul, C. P., Iravani-Tabrizipoor, M., Kukreja, L. M. & Khajepour, A., 2008, Proceedings of the 27th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 421-430 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  48. Published

    Electromagnetic detection system

    Lionheart, W. R. B. (Inventor), Ma, X. (Inventor) & Peyton, A. J. (Inventor), 2008, Patent No. WO2008087385-A2; EP2108132-A2; GB2459790-A; CA2675587-A1; WO2008087385-A3; WO2008087385-A8; CN101688925-A; US2010207624-A

    Research output: Patent

  49. Published

    Field emission vacuum triode: THz waveguide solutions for the transmission lines

    Riccitelli, R., Brunetti, F., Paoloni, C., Ulisse, G., Di Carlo, A. & Krozer, V., 2008, 2008 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, p. 379-380 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  50. Published

    Finite Volume Time Domain Analysis of Nonlinear Photonic Crystal Devices

    Pinto, D. & Obayya, S., 2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  51. Published

    High performance 1.5W pHEMT distributed power amplifier with adjustable inter-stage cascaded network for 10 divided by 2000 MHz

    Narendra, K., Paoloni, C., Limiti, E. & Collantes, J. M., 2008, PROCEEDINGS OF THE 14TH CONFERENCE ON MICROWAVE TECHNIQUES: COMITE 2008. Sistek, J., Novotna, K., Pourova, M., Cifra, L. & Visek, L. (eds.). PRAHA 6: CZECHSLOVAKIA SECTION IEEE, p. 293-296 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  52. Published

    Initiation and propagation of transverse cracking in composite laminates

    Ye, J. & Zhang, D., 2008, Third International Conference on Engineering Failure Analysis, ICEFA-III, Barcelona. Elsevier

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  53. Published

    Nonlinear finite-volume time-domain analysis of photonic crystal-based resonant cavities

    Pinto, D. & Obayya, S., 2008, In: IET Optoelectronics. 2, 6, p. 254-261 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  54. Published

    Novel Time Domain Technique for Photonic Bandgap Resonant Cavities

    Pinto, D. & Obayya, S., 2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  55. Published

    Phase and Amplitude Control of Dipole Crabbing Modes in Multi-Cell Cavities

    Dexter, A. & Burt, G., 2008, p. 1-104. 104 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  56. Published

    Phase Locked Loop Test Methodology

    Richardson, A. & Burbidge, M., 2008, Test and Diagnosis of Analogue, Mixed-signal and RF Integrated Circuits. Sun, Y. (ed.). Stevenage: IET Press, p. 277-306 30 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  57. Published

    Rapid calculation of the properties of klystron cavities

    Carter, R. G., Lingwood, C. & Feng, J., 2008, IVEC 2008. IEEE International Vacuum Electronics Conference, 2008.. IEEE, p. 142-143 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Other chapter contribution

  58. Published

    Single mode fibre laser welding of dissimilar aerospace alloys

    Chen, H.-C., Pinkerton, A. J. & Li, L., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 505-510 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  59. Published

    Structural and Stress Analysis: theories, Tutorial and Examples

    Ye, J., 2008, UK: Spon Press (Taylor and Francis). 217 p.

    Research output: Book/Report/Proceedings › Book

  60. Published

    SWS improved analysis based on inhomogeneous dielectric loading

    Aloisio, M. & Paoloni, C., 2008, 2008 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, p. 298-299 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  61. Published

    Test of A/D Converters

    Richardson, A. & Lechner, A., 2008, Test & Diagnostics of Analogue, Mixed Signal & RF Integrated Circuits. Sun, Y. (ed.). Stevenage: IET Press, p. 213-234 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  62. Published

    Three dimensional analytical and finite element methods for simulating a moving melt pool with mass addition

    Pinkerton, A. J., Kamara, A. M., Shah, K., Safdar, S. & Li, L., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 369-374 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  63. Published

    Free-edge and ply cracking effect in angle-ply laminated composites subjected to in-plane loads

    Zhang, D., Ye, J. & Lam, D., 12/2007, In: Journal of Engineering Mechanics. 133, 12, p. 1268-1277 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  64. Published

    Theoretical analysis of the coincident wire-powder laser deposition process

    Pinkerton, A. J., Syed, W. U. H. & Li, L., 12/2007, In: Journal of Manufacturing Science and Engineering. 129, 6, p. 1019-1027 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  65. Published

    Three-dimensional finite strip analysis of laminated panels

    Attallah, K. M. Z., Ye, J. Q. & Sheng, H. Y., 12/2007, In: Computers and Structures. 85, 23-24, p. 1769-1781 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  66. Published

    Teaching embedded programming through mobile games development in Symbian.

    Edwards, R. & Coulton, P., 10/2007, In: International Journal of Electrical Engineering Education. 44, 4, p. 307-318 12 p.

    Research output: Contribution to Journal/Magazine › Journal article

  67. Published

    State space solution for thick laminated piezoelectric plates with clamped and electric open-circuited boundary conditions

    Sheng, H. Y., Wang, H. & Ye, J. Q., 09/2007, In: International Journal of Mechanical Sciences. 49, 7, p. 806-818 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  68. Published

    Properties degradation induced by transverse cracks in general symmetric laminates

    Zhang, D., Ye, J. & Lam, D., 15/08/2007, In: International Journal of Solids and Structures. 44, 17, p. 5499-5517 19 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  69. Published

    Single-step laser deposition of functionally graded coating by dual 'wire-powder' or 'powder-powder' feeding: a comparative study

    Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 31/07/2007, In: Applied Surface Science. 253, 19, p. 7926-7931 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  70. Published

    Characterisation of the geometrical and kinematical influences of a 5-axis machining cell on the quality of the laser structuring process

    Sandmann, S. & Quayle, S., 15/06/2007. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  71. Published

    Parametric study of semi-rigid composite connections with 3-D finite element approach

    Fu, F., Lam, D. & Ye, J., 06/2007, In: Engineering Structures. 29, 6, p. 888-898 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  72. Published

    Nucleation of CdTe thin films deposited by close-space sublimation under a nitrogen ambient

    Major, J. D., Proskuryakov, Y. Y., Durose, K. & Green, S., 31/05/2007, In: Thin Solid Films. 515, 15, p. 5828-5832 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  73. Published

    Coincident wire and powder deposition by laser to form compositionally graded material

    Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 21/05/2007, In: Surface and Coatings Technology. 201, 16-17, p. 7083-7091 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  74. Published

    Interfacial shear stress in FRP-plated RC beams under symmetric loads

    Yang, J., Ye, J. & Niu, Z., 05/2007, In: Cement and Concrete Composites. 29, 5, p. 421-432 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  75. Published

    Photoinduced "stick-slip" on superhydrophilic semiconductor surfaces

    Denison, K. R. & Boxall, C., 10/04/2007, In: Langmuir. 23, 8, p. 4358-4366 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  76. Published

    Biomechanical testing of the locking compression plate: When does the distance between bone and implant significantly reduce construct stability?

    Ahmad, M., Nanda, R., Bajwa, A. S., Candal-Couto, J., Green, S. & Hui, A. C., 03/2007, In: Injury. 38, 3, p. 358-364 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  77. Published

    Electrochemical Reactors for Metal Recovery from Aqueous Halide Electrolyte Solutions

    Cheng, C.-Y., Dawson, R., Kelsall, G. & Robson, A., 25/02/2007, p. 349. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  78. Published

    Wear analysis of failed acetabular polyethylene: a comparison of analytical methods

    Chuter, G. S. J., Cloke, D. J., Mahomed, A., Partington, P. F. & Green, S. M., 02/2007, In: Journal of Bone and Joint Surgery, British Volume. 89B, 2, p. 273-279 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  79. Published

    Recovery of platinum group metals from secondary materials. I. Palladium dissolution in iodide solutions

    Dawson, R. & Kelsall, G., 1/01/2007, In: Journal of Applied Electrochemistry. 37, 1, p. 3-14 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  80. Published

    Improved complex envelope alternative direction implicit finite difference time domain method for photonic bandgap cavities

    Pinto, D. & Obayya, S., 01/2007, In: Journal of Lightwave Technology. 25, 1, p. 440-447 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  81. Unpublished

    Virtual Prototyping Phase III

    Rennie, A., 01/2007, (Unpublished) N/A. 54 p.

    Research output: Book/Report/Proceedings › Commissioned report

  82. Published

    A method and model for pulsed laser cleaning of rapid manufactured parts

    Pinkerton, A. J. & Li, K., 2007, Proceedings of the 21st International Conference on Surface Modification Technologies. Sudarshan, T. S. & Jeandin, M. (eds.). ASM International

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  83. Published

    A verified model of laser direct metal deposition using an analytical enthalpy balance method

    Pinkerton, A. J., Moat, R., Shah, K., Li, L., Preuss, M. & Withers, P. J., 2007, Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  84. Published

    A Wideband Conical Beam Cylindrical Dielectric Resonator Antenna

    Ambattu, P., Hamsakutty, V., Yohannan, J. & Mathew, K., 2007, In: IEEE Antennas and Wireless Propagation Letters. 6, p. 15-17 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  85. Published

    An analytical model of beam attenuation and powder heating during coaxial laser direct metal deposition

    Pinkerton, A. J., 2007, In: Journal of Physics D: Applied Physics. 40, 23, p. 7323-7334 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  86. Published

    An anisotropic enhanced thermal conductivity approach for modelling laser melt pools

    Safdar, S., Pinkerton, A. J., Moat, R., Li, L., Sheikh, M. A., Preuss, M. & Withers, P. J., 2007, Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  87. Published

    Analytical computations, measurements and 3-D EM simulations for the calculation of cold parameters in helical SWSs

    Aloisio, M., Carter, R. & Paoloni, C., 2007, EIGHTH IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, ELECTRON DEVICES SOC & RELIABILITY GROUP, p. 413-414 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  88. Published

    Cement pressurisation in flanged and unflanged acetabular cups

    Green, S., Attar, F. G., Bhattacharya, R. & Port, A., 2007, Proceedings 8th EFORT Congress, Florence, Italy. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology, p. P486

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  89. Published

    Component repair using laser direct metal deposition

    Wang, W., Pinkerton, A. J., Wee, L. M. & Li, L., 2007, Proceedings of the 35th International MATADOR Conference. Hinduja, S. & Fan, K. (eds.). London: Springer Verlag, p. 345-350 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  90. Published

    Effect of wind loading on low rise buildings using finite element modelling and computational fluid dynamics: A commercially focused appoach

    Taylor, S., Rennie, A. & McDonald, W., 2007, Virtual and Rapid Manufacturing: Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J. D. S. (ed.). London: Taylor & Francis Group, p. 811-816 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  91. Published

    Fixation strength of cemented Birmingham (HA coated, cementless) cups - a biomechanical study

    Green, S., Kadakia, A. & Partington, P. F., 2007, Proceedings 8th EFORT congress, Florence, Italy. European Federation of National Associations of Orthopaedics and Traumatology

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  92. Published

    From art to engineering

    O'Hana, S., Pinkerton, A. J. & Shoba, K., 2007, Proceedings of the 21st International Conference on Surface Modification Technologies. Sudarshan, T. S. & Jeandin, M. (eds.). ASM International

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  93. Published

    In vitro wear performance of MTP prostheses evaluated on a multi-station metatarso-phalangeal joint simulator

    Green, S., Joyce, T., Lee, S. & Unsworth, A., 2007, Proceedings 8th EFORT Congress. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology, p. F837

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  94. Published

    Innovative design of nano-vacuum triode

    Riccitelli, R., Brunetti, F., Petrolati, E., Paoloni, C., Di Carlo, A., Toschi, F., Terranova, M. L. & Cirillo, M., 2007, EIGHTH IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, ELECTRON DEVICES SOC & RELIABILITY GROUP, p. 323-324 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  95. Published

    Intragranular precipitation variations in laser deposited Waspaloy due to compositional inhomogeneities

    Moat, R. J., Karadge, M., Pinkerton, A. J., Deschamps, A., Bley, F., Li, L., Withers, P. J. & Preuss, M., 2007, Proceedings of the 136th TMS Annual Meeting. The Minerals, Metals & Materials Society (TMS), p. 77-86 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  96. Published

    Multiresolution Time Domain analysis of optical guided-wave devices

    Obayya, S. S. A. & Letizia, R., 2007, Computational Electromagnetics in Time-Domain, 2007. CEM-TD 2007. Workshop on. New York: IEEE, p. 80-83 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  97. Published

    New Alternating-Direction-Implicit Finite-Difference-Time-Domain Method for Photonic Crystal Devices

    Pinto, D. & Obayya, S., 2007. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  98. Published

    Stress distributions in multilayer laser deposited Waspaloy parts measured using neutron diffraction

    Moat, R. J., Pinkerton, A. J., Hughes, D. J., Li, L., Withers, P. J. & Preuss, M., 2007, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  99. Published

    Wear analysis of failed acetabular polyethylene: A comparison of analytical methods

    Green, S., Chuter, G. S. J., Cloke, D. J., Mohamed, A. & Partington, P. F., 2007, Proceedings 8th EFORT Congress, Florence. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  100. Unpublished

    The electrochemcial recovery of platinum and palladium from spent alumina supported catalysts

    Dawson, R., 1/12/2006, (Unpublished) University of London. 237 p.

    Research output: Thesis › Doctoral Thesis

Previous 1 2 3 4 5 6 7 8 Next

Back to top