School of Engineering

View graph of relations

Faculty of Science and Technology

Show 14 centres, groups and clusters

Hide 14 centres, groups and clusters

4801 - 4900 out of 6,515Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Title

Published
Rapid design, prototyping and manufacture: proceedings of the seventh national conference on
Bocking, C. E. (Editor), Rennie, A. E. W. (Editor) & Jacobson, D. M. J. (Editor), 2006, MJA Print. 134 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacturing: Proceedings of the Ninth National Conference on
Rennie, A. (Editor), Jacobson, D. M. (Editor) & Bocking, C. E. (Editor), 2008, MJA Print. 173 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacturing
Rennie, A., Aitchison, D. (Editor) & Jacobson, D. M., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 181-181 1 p.
Research output: Contribution to Journal/Magazine › Editorial
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Tenth National Conference on
Rennie, A. (Editor), Bocking, C. E. (Editor) & Jacobson, D. M. (Editor), 2009, MJA Print. 123 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Eleventh National Conference on
Jacobson, D. M. (Editor), Rennie, A. (Editor) & Bocking, C. E. (Editor), 2010, CRDM Ltd. 222 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on
Rennie, A. (Editor) & Bocking, C. E. (Editor), 06/2011, CRDM Ltd. 203 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Thirteenth Conference on
Bocking, C. E. (Editor) & Rennie, A. (Editor), 06/2012, High Wycombe: CRDM Ltd. 109 p.
Research output: Book/Report/Proceedings › Proceedings
Published
Rapid Estimate of Wind Turbine Energy Loss due to Blade Leading Edge Delamination Using Artificial Neural Networks
Campobasso, S., Cavazzini, A. & Minisci, E., 26/06/2020, In: Journal of Turbomachinery. 142, 7, 11 p., 071002.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Rapid estimation of natural pigments in olive and avocado oils using a colorimetric sensor
Lorenzo, N. D., da Rocha, R. A., Papaioannou, E., Tessaro, L. L. G. & Nunes, C. A., 30/09/2025, In: Journal of Food Composition and Analysis. 145, 107773.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid Generations of Multipactor Charts by Numerical Solution of the Phase Equation.
Dexter, A. & Seviour, R., 7/05/2005, In: Journal of Physics D: Applied Physics. 38, 9, p. 1383-1389 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid hydrothermal flow synthesis and characterisation of carbonate and silicate-substituted calcium phosphates
Chaudhry, A. A., Knowles, J. C., Rehman, I. & Darr, J. A., 2013, In: JOURNAL OF BIOMATERIALS APPLICATIONS. 28, 3, p. 448-461 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid imaging and product screening with low-cost line-field Fourier domain optical coherence tomography
Zhang, Z., Yang, X., Zhao, Z., Zeng, F., Ye, S., Baldock, S., Lin, H., Hardy, J., Zheng, Y. & Shen, Y., 4/07/2023, In: Scientific Reports. 13, 10809.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid manufacturing complex geometries for high-power microwave applications
Seviour, R., Rennie, A. & Celik, H. K., 12/2009.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Unpublished
Rapid Manufacturing Design Scenarios
Smith, P. & Rennie, A., 12/2007, (Unpublished). 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Unpublished
Rapid Manufacturing Design Tools
Smith, P. & Rennie, A., 12/2008, (Unpublished). 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Rapid prediction of real-time thermal characteristics, solidification parameters and microstructure in laser directed energy deposition (powder-fed additive manufacturing)
Huang, Y., Ansari, M., Asgari, H., Farshidianfar, M. H., Sarker, D., Khamesee, M. B. & Toyserkani, E., 31/12/2019, In: Journal of Materials Processing Technology. 274, p. 116-286
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid production of microwave packaging in Silicon Aluminium by thin-shell electroforming
Bocking, C., Jacobson, D. M. & Rennie, A. E. W., 01/2002, In: Microelectronics International. 19, 1, p. 30-32 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming
Bocking, C., Jacobson, D. M. & Rennie, A., 06/2001, 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of: iMAPS Strasbourg 2001, "The Millenium Conference". p. 412-415 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Rapid prototyping and flow simulation applications in design of agricultural irrigation equipment: Case study for a sample in-line drip emitter: The paper is to study CFD and RP application samples on the design issues associated with agricultural irrigation equipment
Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 03/2011, In: Virtual and Physical Prototyping. 6, 1, p. 47-56 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter
Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 181-191 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Rapid prototyping using direct laser deposition - the effect of powder atomization type and flowrate
Pinkerton, A. J. & Li, L., 2003, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 217, 6, p. 741-752 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid prototyping using electrodeposition of copper
Dover, S. J., Rennie, A. & Bennett, G. R., 08/1996, Solid Freeform Fabrication Symposium 1996. University of Texas at Austin, p. 191-198 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Rapid Prototyping, Tooling and Manufacturing: Proc. Third National Conference on
Rennie, A. E. W. (Editor), Jacobson, D. M. (Editor) & Bocking, C. (Editor), 2002, Professional Engineering Publishing. 173 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid synthesis of cobalt manganese phosphate by microwave-assisted hydrothermal method and application as positrode material in supercapatteries
Cherusseri, J., Thomas, S. A., Pandey, A. K., Zaed, M., Farhana, N. K. & Saidur, R., 4/11/2024, In: Scientific Reports. 14, 1, 26550.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid synthesis of graphene quantum dots using a continuous hydrothermal flow synthesis approach
Kellici, S., Acord, J., Power, N. P., Morgan, D. J., Coppo, P., Heil, T. & Saha, B., 6/03/2017, In: RSC Advances. 7, 24, p. 14716-14720 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid synthesis of thermally stable hydroxyapaptite
Nazir, R., Iqbal, N., Khan, A. S., Akram, A., Asif, A., Chaudhry, A. A., Rehman, I. U. & Hussain, R., 2012, In: Ceramics International. 38, 1, p. 457-462 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rate acceleration of 2-methyl-1-butanol dehydration in a reactive distillation column
Aiouache, F. & Goto, S., 05/2002, In: Journal of Chemical Engineering of Japan. 35, 5, p. 443-449 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rayleigh Taylor instability in a dusty plasma
Sen, S., Fukuyama, A. & Honary, F., 08/2010, In: Journal of Atmospheric and Solar-Terrestrial Physics. 72, 13, p. 938-942 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Reaction of uranium with poly-hydroxy-aromatic groups on particles through mono- and multi-dentate surface complexes on the basis of pH and redox potential: A modelling approach
McGowan, S., Degueldre, C. & Aiouache, F., 31/12/2024, In: Progress in Nuclear Energy. 177, 105400.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Reactions to other corticosteroids in patients with allergic contact-dermatitis from hydrocortisone.
Wilkinson, S. M., Hollis, S. & Beck, M. H., 1995, In: British Journal of Dermatology. 132, 5, p. 766-771 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Reactions to other corticosteroids in patients with positive patch test reactions to budesonide.
Wilkinson, S. M., Hollis, S. & Beck, M. H., 1995, In: Journal of The American Academy of Dermatology. 33, 6, p. 963-968 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Reactive distillation for synthesis of glycerol carbonate via glycerolysis of urea
Lertlukkanasuk, N., Kiatkittipong , W., Arpornwichanop, A., Aiouache, F. & Assabumrungrat, S., 08/2013, In: Chemical Engineering and Processing: Process Intensification. 70, p. 103–109 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Reactive distillation-pervaporation hybrid column for tert-amyl alcohol etherification with ethanol
Aiouache, F. & Goto, S., 06/2003, In: Chemical Engineering Science. 58, 12, p. 2465-2477 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Reagent and power consumption of in-situ waterborne pollution monitoring systems
Quane, N., Moore, B. & Cheneler, D., 3/07/2017.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Real Option Valuation of an Emerging Renewable Technology Design in Wave Energy Conversion
DiLellio, J. A., Butler, J. C., Rizaev, I. G., Sheng, W. & Aggidis, G., 4/03/2025, In: ECONOMETRICS. 13, 1, p. 1-18 18 p., 11.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real time nanogravimetric monitoring of corrosion for nuclear decommissioning
Tzagkaroulakis, I. & Boxall, C., 2015, In: ECS Transactions. 66, 17, p. 73-83 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real time nanogravimetric monitoring of corrosion in radioactive environments
Tzagkaroulakis, I., 2017, Lancaster University. 196 p.
Research output: Thesis › Doctoral Thesis
Published
Realising real-time capabilities of an embedded control system for fast-neutron scintillation detectors
Aspinall, M. D., Joyce, M. J., Tomanin, A., Lavietes, A., Cave, F., Plentada, R. & Astromskas, V., 2016. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Realistic magnetospheric density model for 29 August 2000
Denton, R. E., Goldstein, J., Lee, D.-H., King, R. A., Dent, Z. C., Gallagher, D. L., Berube, D., Takahashi, K., Nosé, M., Milling, D. & Honary, F., 03/2006, In: Journal of Atmospheric and Solar-Terrestrial Physics. 68, 6, p. 615-628 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Realistic Modeling of High Rise Structures subjected to Progressive Collapse
Stephen, D., Ye, J. & Lam, D., 2011, The Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, Crete, Greece..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Realization of a carbon nanotube-based triode
Brunetti, F., Lugli, P., Fiori, A., Orlanducci, S., Sessa, V., Tamburri, E., Toschi, F., Terranova, M. L., Riccitelli, R., Petrolati, E., von Neumann, L., Paoloni, C., Reale, A., di Carlo, A., Ciorba, A., Cirillo, M. & Merlo, V., 1/06/2006, Nanotechnology, 2006. IEEE-NANO 2006. Sixth IEEE Conference on. IEEE, Vol. 1. p. 246-249 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Realization of the physical to virtual connection for digital twin of construction crane
Yuan, E., Yang, J., Saafi, M., Wang, F. & Ye, J., 31/03/2025, In: Journal of Industrial Information Integration. 44, 15 p., 100779.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real-Time Avoidance of Ionising Radiation Using Layered Costmaps for Mobile Robots
West, A., Wright, T., Tsitsimpelis, I., Groves, K., Joyce, M. J. & Lennox, B., 17/03/2022, In: Frontiers in Robotics and AI. 9, 13 p., 862067.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real-time capabilities of a digital analyzer for mixed-field assay using scintillation detectors
Aspinall, M., Joyce, M. J., Lavietes, A., Plenteda, R., Cave, F. D., Parker, H. M., Jones, A. R. & Astromskas, V., 03/2017, In: IEEE Transactions on Nuclear Science. 64, 3, p. 945-950 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real-Time Defect Detection of Die Cast Rotor in EV Induction Motor Based on Circular Flux Sensing Coils
Zhu, Q., Wang, X., Wang, H., Xia, M., Cao, W. & Lu, S., 30/11/2022, Advanced Sensors and Sensing Technologies for Electric Vehicles. Cao, W. & Lu, S. (eds.). AIP Publishing, p. 1-26 26 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
E-pub ahead of print
Real-time Defect Detection of Die Cast Rotor in Induction Motor Based on Circular Flux Sensing Coils
Zhu, Q., Wang, X., Wang, H., Xia, M., Lu, S., Liu, B., Li, G. & Cao, W., 20/12/2021, (E-pub ahead of print) In: IEEE Transactions on Industrial Informatics.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real-time digital imaging of neutrons and gamma rays with a fast liquid scintillator detector
Gamage, K. & Joyce, M., 2011. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Speech
Published
Real-time digital measurement gamma-neutron ratios in mixed radiation fields arising from standard isotopic sources
Gamage, K., Joyce, M. & Hawkes, N., 2010, p. 12.1-12.6. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Real-time digital neutron/γ discrimination in non-flammable fast scintillators.
Joyce, M. J., 2010.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Real-time digital pulse-shape discrimination in non-hazardous fast liquid scintillation detectors: prospects for safety and security
Joyce, M. & Aspinall, M., 2011. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Real-time digital pulse-shape discrimination in non-hazardous fast liquid scintillation detectors: prospects for safety and security
Joyce, M., Aspinall, M., Cave, F. & Lavietes, A., 2012, In: IEEE Transactions on Nuclear Science. 59, 4, p. 1245-1251 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real-time digital simulator (RTDS) and it applications
Liang, Z., Ma, X., Wang, L., Kuffel, R. & Jiang, X., 10/1997, In: Dianli Xitong Zidonghue/Automation of Electric Power Systems. 21, 10, p. 61-64 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real-time Energy Management in Smart Homes through Deep Reinforcement Learning
Aldahmashi, J. & Ma, X., 1/04/2024, In: IEEE Access. 12, p. 43155 - 43172
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real-time investigation of temporal and spatial correlations in fast neutron assay from spontaneous and stimulated fission
Sarwar, R., 2019, Lancaster University. 340 p.
Research output: Thesis › Doctoral Thesis
Published
Real-time measurements of production uranium fuel assemblies using a liquid scintillator-based active interrogation neutron detection system
Lavietes, A., Joyce, M., Plentada, R., Mascarenhas, M., Cronholm, M., Aspinall, M., Cave, F., Tomanin, A. & Peerani, P., 10/2013, p. #N39-2.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Real-Time Nanogravimetric Monitoring of Corrosion in Radioactive Decontamination Systems
Tzagkaroulakis, I., Boxall, C. & Trivedi, D., 23/12/2016, In: MRS Advances. 2, 10, p. 577-582 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real‑time nonlinear parameter estimation and tracking control of unmanned aerial vehicles in closed‑loop
Imran, I., Can, A., Stolkin, R. & Montazeri, A., 22/02/2023, In: Scientific Reports. 13, 19 p., 3125.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real-time Quality Inspection of Motor Rotor Using Cost-effective Intelligent Edge System
Zhu, Q., Lu, J., Wang, X., Wang, H., Lu, S., de Silva, C. W. & Xia, M., 15/04/2023, In: IEEE Internet of Things Journal. 10, 8, p. 7393-7404 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real-time recognition of sick pig cough sounds
Exadaktylos, V., Silva, M., Aerts, J.-M., Taylor, C. J. & Berckmans, D., 10/2008, In: Computers and Electronics in Agriculture. 63, 2, p. 207-214 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real-time source localisation by passive, fast-neutron time-of-flight with organic scintillators for facility-installed applications
Astromskas, V., Bradnam, S. C., Packer, L. W., Aspinall, M. D. & Joyce, M. J., 1/04/2021, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 994, 11 p., 165094.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real-time, digital imaging of fast neutrons and γ rays with a single fast liquid scintillation detector
Joyce, M. J. & Gamage, K. A. A., 2012, 2011 IEEE Nuclear Science Symposium Conference Record. IEEE, p. 602-606 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Real-time, digital imaging of neutrons and gamma rays with a fast liquid scintillation detector
Joyce, M. & Akurugoda Gamage, K., 5/10/2011. 5 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Real-time, digital pulse-shape discrimination in non-hazardous fast liquid scintillation detectors: Prospects for safety and security
Joyce, M. J., Aspinall, M. D., Cave, F. D. & Lavietes, A. D., 2011, ANIMMA 2011 - Proceedings: 2nd International Conference on Advancements in Nuclear Instrumentation, Measurement Methods and their Applications. IEEE
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Real-time, fast neutron coincidence assay of plutonium with a 4-channel multiplexed analyzer and organic scintillators
Joyce, M., Gamage, K., Aspinall, M., Cave, F. & Lavietes, A., 06/2014, In: IEEE Transactions on Nuclear Science. 61, 3 , p. 1340-1348 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real-time, fast-neutron spectroscopy for source identification in mixed-field imaging applications
Beaumont, J., Mellor, M. & Joyce, M. J., 2012, 2012 IEEE Nuclear Science Symposium and Medical Imaging Conference Record (NSS/MIC). IEEE, p. 219-221 3 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Rebound of a particle from a surface with a viscous and nonlinear viscoelastic liquid in the contact zone
Bowen, J., Cheneler, D., Andrews, J., Wu, C., Ward, M. & Adams, M., 2012, Discrete element modelling of particulate media. Wu, C. (ed.). Cambridge: RSC Publishing, p. 86-94 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Recent Advancement in Solar-Driven Interfacial Steam Generation for Desalination: A State-of-the-Art Review
Hazra, S. K., Saleque, A. M., Thakur, A. K., Ivan, M. N. A. S., Biswas, D., Khan, S. A., Saidur, R., Ma, Z. & Sathyamurthy, R., 1/03/2024, In: Energy Technology. 12, 3, 2301190.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
Recent advancements and challenges in flexible low temperature dye sensitised solar cells
Khir, H., Pandey, A. K., Saidur, R., Shakeel Ahmad, M., Abd Rahim, N., Dewika, M. & Samykano, M., 31/10/2022, In: Sustainable Energy Technologies and Assessments. 53, C, 23 p., 102745.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Recent advances in aptamer-based sensors for breast cancer diagnosis: special cases for nanomaterial-based VEGF, HER2, and MUC1 aptasensors
Şahin, S., Caglayan, M. O. & Üstündağ, Z., 4/10/2020, In: Microchimica Acta. 187, 10, 549.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
Recent advances in cleaner hydrogen productions via thermo-catalytic decomposition of methane: Admixture with hydrocarbon
Syed Muhammad, A. F., Awad, A., Saidur, R., Masiran, N., Salam, A. & Abdullah, B., 11/10/2018, In: International Journal of Hydrogen Energy. 43, 41, p. 18713-18734 22 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Recent Advances in Greener and Energy Efficient Alkene Epoxidation Processes
Mohammed , M. L. & Saha, B., 13/04/2022, In: Energies. 15, 8, 15 p., e2858.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Recent Advances in Metal Powder-Based Additive Manufacturing
Wu, H., Ren, Y., Tian, Y. & Caballero, A. O., 26/05/2023, In: Materials. 16, 11, 3975.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Recent Catalytic Advances in Hydrotreatment Processes of Pyrolysis Bio-Oil
Bagnato, G., Sanna, A., Paone, E. & Catizzone, E., 23/01/2021, In: Catalysts. 11, 2, p. 1-19 19 p., 157.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Recent concepts in biodegradable polymers for tissue engineering paradigms: a critical review
Iqbal, N., Khan, A. S., Asif, A., Yar, M., Haycock, J. W. & Rehman, I. U., 17/02/2019, In: INTERNATIONAL MATERIALS REVIEWS. 64, 2, p. 91-126 36 p.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
Recent Development and Application of Millimeter-Wave Leaky-Wave Antennas
Wang, L., 19/11/2023.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Recent development in the electrochemical conversion of carbon dioxide: Short review
Hussin, F. & Aroua, M. K., 1/08/2019, In: AIP Conference Proceedings. 2124, 1, 9 p., 030017.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Recent Development of Substrate Edge Antennas and Arrays for Millimeter-Wave Communication
Wang, L. & Yin, X., 25/01/2021, 2020 International Symposium on Antennas and Propagation (ISAP). IEEE
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Recent developments in processing and surface modification of hydroxyapatite
Norton, J., Malik, K. R., Darr, J. A. & Rehman, I. U., 2006, In: Advances in Applied Ceramics. 105, 3, p. 113-139 27 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Recent developments in testing, design analysis and modelling of bolted connections in pultruded GRP frames made of open-section profiles.
Turvey, G. J., 1998, Proceedings of the 4th EPTA world pultrusion conference. European Pultrusion Technology Association, p. 14
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Recent developments in the CAPTAIN Toolbox for Matlab
Young, P. & Taylor, C. J., 2012, 16th IFAC Symposium on System Identification . Kinnaert, M. (ed.). Brussels: IFAC, 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper
Published
Recent developments in the energy harvesting systems from road infrastructures
Zabihi, N. & Saafi, M., 20/08/2020, In: Sustainability. 12, 17, 27 p., 6738.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Recent improvements to a transportable neutron spectrometer (TNS).
Weaver, J. A., Joyce, M. J., Peyton, A. J. & Roskell, J., 01/2002, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 476, 1-2, p. 143-148 6 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Recent improvements to a transportable neutron spectrometer (TNS).
Weaver, J. A., Joyce, M. J., Peyton, A. J. & Roskell, J., 2002, Proceedings of a conference on nuclear instruments and methods in physics research.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Recent improvements to a transportable neutron spectrometer (TNS).
Weaver, J. A., Joyce, M. J., Peyton, A. J. & Silvie, J., 2000, Proceedings of the international workshop on neutron field spectrometry in science, technology and radiation protection. Pisa
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Recent Insights into Lignocellulosic Biomass Pyrolysis: A Critical Review on Pretreatment, Characterization, and Products Upgrading
Zadeh, Z. E., Abdulkhani, A., Aboelazayem, O. & Saha, B., 8/07/2020, In: Processes. 8, 7, 31 p., 799.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Recent Progress in Electromagnetic Interference Shielding Performance of Porous Polymer Nanocomposites—A Review
Pai, A. R., Puthiyaveettil Azeez, N., Thankan, B., Gopakumar, N., Jaroszewski, M., Paoloni, C., Kalarikkal, N. & Thomas, S., 25/05/2022, In: Energies. 15, 11, 38 p., 3901.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
Recent progress in emerging hybrid nanomaterials towards the energy storage and heat transfer applications: A review
Muhamad Azim, M. K., Arifutzzaman, A., Saidur, R., Khandaker, M. U. & Bradley, D. A., 15/08/2022, In: Journal of Molecular Liquids. 360, 35 p., 119443.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Recent progress in Terahertz metamaterial modulators
Degl'Innocenti, R., Lin, H. & Navarro-Cia', M., 31/03/2022, In: Nanophotonics. 11, 8, p. 1485-1514 30 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Recent progress of laser processing technology in micro-LED display manufacturing: A review
Song, L., Yong, X., Zhang, P., Song, S., Chen, K., Yan, H., Sun, T., Lu, Q., Shi, H., Chen, Y. & Huang, Y., 28/02/2025, In: Optics and Laser Technology. 181, 111710.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Recent progress on a co-harmonic cyclotron resonant maser
Constable, D. A., Ronald, K., He, W., Phelps, A. D. R. & Cross, A. W., 29/03/2010.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Recent research advances at Lancaster University on double-lap bolted tension joints in pultruded GRP plate material.
Turvey, G. J. & Wang, P., 2004, Proceedings of the 7th world pultrusion conference. 7 ed. p. 1-16 16 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Recent Research on Structural Design, Performance Optimization, and Applications of Piezoelectric Pumps
Yan, Q., Liu, Z., Wang, L., Sun, W. & Jiang, M., 30/04/2025, In: Micromachines. 16, 4, 474.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Recent studies in concentrated photovoltaic system (CPV): A review
George, M., Pandey, A. K., Abd Rahim, N. & Saidur, R., 5/09/2018, 5th IET International Conference on Clean Energy and Technology (CEAT2018). IET, 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Recent Studies of Heterogeneous and Homogeneous Reduction–Oxidation Reactions of U(IV) Ions in Nitric Acid and TBP Phases
Boxall, C., Taylor, R., Xiao, S., Koltunov, V. & Marchenko, V., 2002, Proceedings of 3rd NUCEF International Symposium: NUCEF 2001: Scientific Basis for Criticality Safety, Separations and Waste Disposal. Banba, T. & Tsubata, Y. (eds.). Tokai, Ibaraki, Japan: Japan Atomic Energy Research Institute, p. 205-212 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Recent Technological Advances in Spatial Active Noise Control Systems
Javahersaz, R., Mohamady, S. & Montazeri, A., 24/08/2022, Internoise 2022. Glasgow, 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Recent trends in the development of adsorption technologies for carbon dioxide capture: A brief literature and patent reviews (2014–2018)
Hussin, F. & Aroua, M. K., 20/04/2020, In: Journal of Cleaner Production. 253, 25 p., 119707.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
Reconfigurable circuits for fault tolerant systems: factors to consider
Richardson, A., Jeffrey, C. & Lechner, A., 21/06/2002, p. 215-218. 4 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Reconfigurable smart sensors for dependable systems
Sharif, E., Richardson, A. & Dorey, T., 1/11/1997, Hardware Systems for Dependable Applications (Digest No: 1997/335), IEE Half-Day Colloquium on. IEEE, p. 2/1 -2/6 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Reconfiguration based built-in self-test for analogue front-end circuits
Richardson, A., Lechner, A. & Hermes, B., 18/06/1999, p. 243-247. 5 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Reconstruction and identification of boosted di-τ systems in a search for Higgs boson pairs using 13 TeV proton-proton collision data in ATLAS
Collaboration, A., Barton, A. E., Bertram, I. A., Borissov, G., Bouhova-Thacker, E. V., Fox, H., Henderson, R. C. W., Jones, R. W. L., Kartvelishvili, V., Long, R. E., Love, P. A., Muenstermann, D., Parker, A. J., Sanderswood, I., Smizanska, M., Tee, A. S., Walder, J., Wharton, A. M., Whitmore, B. W. & Yexley, M., 30/11/2020, In: Journal of High Energy Physics. 2020, 11, 47 p., 163.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...45 46 47 48 49 50 51 52 ...66 Next

Research

School of Engineering

Quick Links

Connect With Us