School of Engineering

View graph of relations

Faculty of Science and Technology

Show 14 centres, groups and clusters

Hide 14 centres, groups and clusters

4101 - 4200 out of 6,515Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Author last name

Published
A systematic study on the use of short circuiting for the improvement of proton exchange membrane fuel cell performance
Gupta, G., Wu, B., Mylius, S. & Offer, G. J., 16/02/2017, In: International Journal of Hydrogen Energy. 42, 7, p. 4320-4327 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Nafion-stabilised bimetallic Pt-Cr nanoparticles as electrocatalysts for proton exchange membrane fuel cells (PEMFCs)
Gupta, G., Sharma, S. & Mendes, P. M., 25/08/2016, In: RSC Advances. 6, p. 82635-82643 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pt Diffusion Dynamics for the Formation Cr–Pt Core–Shell Nanoparticles
Gupta, G., Iqbal, P., Yin, F., Liu, J., Palmer, R. E., Sharma, S., Leung, K. C.-F. & Mendes, P. M., 3/06/2015, In: Langmuir. 31, p. 6917–6923 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Corrosion and Oxidation Behavior of Zr58Cu22Fe4Co4Al12 Metallic Glass
Gupta, G., Kumar, M., Chattopadhyay, C. & Mondal, K., 1/12/2011, In: Trans Indian Inst Met. 64, p. 401–408 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
In situ nanocrystalline Fe–Si coating by mechanical alloying
Gupta, G., Mondal, K. & Balasubramaniam, R., 12/08/2009, In: Journal of Alloys and Compounds. 482, 1-2, p. 118-122 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The effects of morphology, microstructure and mixed-valent states of MnO₂ on the oxygen evolution reaction activity in alkaline anion exchange membrane water electrolysis
Gupta, G., Selvakumar, K., Lakshminarasimhan, N., Senthil Kumar, S. M. & Mamlouk, M., 15/06/2020, In: Journal of Power Sources. 461, 12 p., 228131.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Design of a reduced-order nonlinear observer for vehicle velocities estimation
Guo, H., Chen, H., Cao, D. & Jin, W., 2013, In: IET Control Theory and Applications. 7, 17, p. 2056–2068 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An overview of grid-connected fuel cell system for grid support
Guo, R., Li, Q. & Zhao, N., 30/11/2022, In: Energy Reports. 8, p. 884-892 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A combination of hybrid generator and battery system for frequency support
Guo, R., Schofield, N. & Zhao, N., 29/08/2022, 11th International Conference on Power Electronics, Machines and Drives (PEMD 2022). IEEE
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A Review of the Levelized Cost of Wave Energy Based on a Techno-Economic Model
Guo, C., Sheng, W., De Silva, D. G. & Aggidis, G., 22/02/2023, In: Energies. 16, 5, 2144.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
A Review of the Levelized Cost of Wave Energy Based on a Techno-Economic Model
Guo, C., Sheng, W., De Silva, D. & Aggidis, G., 22/06/2023, ISOPE 2023. ISOPE, p. 663-669 7 p. 471
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Understanding keyhole induced-porosities in laser powder bed fusion of aluminum and elimination strategy
Guo, L., Wang, H., Liu, H., Huang, Y., Wei, Q., Leung, C. L. A., Wu, Y. & Wang, H., 31/01/2023, In: International Journal of Machine Tools and Manufacture. 184, 103977.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Quantifying the effects of gap on the molten pool and porosity formation in laser butt welding
Guo, L., Wang, H., Liu, H., Huang, Y., Wei, Q., Leung, C. L. A., Wu, Y. & Wang, H., 1/08/2023, In: International Journal of Heat and Mass Transfer. 209, 124143.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Evaluation of hydrodynamic coefficients and sensitivity analysis of a work-class remotely operated vehicle using planar motion mechanism tests
Guo, R., Zan, Y., Luo, X., Ma, X., Xu, T., Han, D., Li, D. & Bai, X., 15/11/2024, In: Ocean Engineering. 312, 32 p., 119037.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Grid Integration of a Novel Linear-generator-based Wave Power Conversion System
Guo, R., Wu, Y., Ma, X., Aggidis, G. & Zhao, N., 4/10/2024.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Hybrid system consisting of synchronous condenser and virtual synchronous generator for enhanced power quality in microgrid
Guo, R. & Zhao, N., 10/02/2025, In: Electronics Letters. 61, 1, e70168.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Genetic algorithms for the development and optimisation of wave energy converter control systems.
Gunn, K. & Taylor, C. J., 2008.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Multi-objective evolutionary optimisation of the geometry of a class of controlled wave energy converter.
Gunn, K., Lingwood, C. & Taylor, C. J., 09/2010, UKACC International Conference Control 2010. Burnham, K. J. & Ersanilli, V. E. (eds.). p. 349-354 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An Independent Validation of the Optimality of Latching and De-clutching Control by Evolutionary Methods.
Gunn, K. J., Taylor, C. J. & Lingwood, C. J., 2011, 9th European Wave and Tidal Energy Conference.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Evolutionary algorithms for the development and optimisation of wave energy converter control systems.
Gunn, K., Taylor, C. J. & Lingwood, C., 2009, 8th European Wave and Tidal Energy Conference.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
How to fix a tibial tubercle osteotomy with distalisation: A finite element analysis
Guneri, B., Kose, O., Celik, H. K., Cakar, A., Tasatan, E. & Rennie, A., 31/08/2022, In: Knee. 37, p. 132-142 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Study of the auroral emissions and electron precipitation depending on the solar activity
Guineva, V., Trondsen, E., Marple, S., Hall, C. M., Cannon, P. & Hansen, T. L., 2008, In: Solar-Terrestrial Physics (Russian Academy of Science). 12, 2, p. 224-228 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Study of the auroral 5577Å and 6300Å emissions and the related phenomena under quiet and disturbed conditions.
Guineva, V., Trøndsen, E., Marple, S., Hall, C., Cannon, P. & Hansen, T. L., 27/06/2007, p. 195-200. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
In-depth comparison of powder and ingot metallurgical M50 Bearing Steels
Guetard, G., André, J., Bellus, J., Sherif, M. Y. & Rivera-Díaz-del-Castillo, P., 12/2017, Bearing Steel Technologies: 11th Volume, Progress in Steel Technologies and Bearing Steel Quality Assurane. ASTM International, Vol. STP 1600. p. 75-91 17 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Damage evolution around primary carbides under rolling contact fatigue in VIM-VAR M50
Guetard, G., Toda-Caraballo, I. & Rivera-Díaz-Del-Castillo, P. E. J., 1/10/2016, In: International Journal of Fatigue. 91, 1, p. 59-67 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Formation of oxide under rolling contact fatigue
Guetard, G. & Rivera-Díaz-Del-Castillo, P. E. J., 1/03/2016, In: Tribology International. 95, p. 262-266 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Application of Cost Benefits Analysis for the Implementation of Renewable Energy and Smart Solution Technologies: A Case Study of InteGRIDy Project
Gudlaugsson, B., Ahmed, T., Dawood, H., Ogwumike, C. & Dawood, N., 3/12/2021, (E-pub ahead of print) In: Environmental Sciences Proceedings. 11, 1, 6 p., e15.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Electro-optically tunable microring resonators in lithium niobate
Guarino, A., Poberaj, G., Rezzonico, D., Degl'Innocenti, R. & Günter, P., 07/2007, In: Nature Photonics. 1, 7, p. 407-410 4 p.
Research output: Contribution to Journal/Magazine › Letter › peer-review
Published
Optical waveguides in Sn2P2S6 by low fluence MeV He+ ion implantation
Guarino, A., Jazbinšek, M., Herzog, C., Degl'Innocenti, R., Poberaj, G. & Günter, P., 2006, In: Optics Express. 14, 6, p. 2344-2358 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Proportional-Integral-Plus Control Strategy of an Intelligent Excavator
Gu, J., Taylor, C. J. & Seward, D. W., 01/2004, In: Computer-Aided Civil and Infrastructure Engineering. 19, 1, p. 16-27 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
PIP-gain scheduling control of an intelligent excavator.
Gu, J., Taylor, C. J. & Seward, D. W., 2004, Proceedings of the 21st international symposium on automation and robotics in construction. p. 280-285 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Modelling of an hydraulic excavator using simplified refined instrumental variable (SRIV) algorithm
Gu, J., Taylor, J. & Seward, D., 11/2007, In: Journal of Control Theory and Applications. 5, 4, p. 391-396 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Proportional-integral-plus control of robotic excavator arm utilising state-dependent parameter model
Gu, J., Feng, Z.-H., Ma, X. & Ni, J.-F., 2011, In: Applied Mechanics and Materials. 48-49, p. 1323-1327 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Non-linear finite element model for dynamic analysis of high-speed valve train and coil collisions
Gu, Z., Hou, X., Keating, E. & Ye, J., 1/05/2020, In: International Journal of Mechanical Sciences. 173, 10 p., 105476.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Design and analysis method of nonlinear helical springs using a combining technique: Finite element analysis, constrained Latin hypercube sampling and genetic programming
Gu, Z., Hou, X. & Ye, J., 1/11/2021, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 235, 22, p. 5917-5930 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A parametric study of adhesive bonded joints with composite material using black-box and grey-box machine learning methods: Deep neuron networks and genetic programming
Gu, Z., Liu, Y., J.Hughes, D., Ye, J. & Hou, X., 15/07/2021, In: Composites Part B: Engineering. 217, 11 p., 108894.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Advanced static and dynamic analysis method for helical springs of non-linear geometries
Gu, Z., Hou, X. & Ye, J., 24/11/2021, In: Journal of Sound and Vibration. 513, 18 p., 116414.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Static and Dynamic Analysis of Nonlinear Valve Springs Based on Finite Element Analysis and Machine Learning Algorithm
Gu, Z., 2022, Lancaster University. 201 p.
Research output: Thesis › Doctoral Thesis
Published
A Novel Self‐Updating Design Method for Complex 3D Structures Using Combined Convolutional Neuron and Deep Convolutional Generative Adversarial Networks
Gu, Z., Hou, X., Saafi, M. & Ye, J., 30/06/2022, In: Advanced Intelligent Systems. 4, 6, 10 p., 2100186.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A genetic evolved machine learning approach for 3D DEM modelling of anisotropic materials with full consideration of particulate interactions
Gu, Z., Ding, X., Hou, X. & Ye, J., 1/02/2023, In: Composites Part B: Engineering. 250, 11 p., 110432.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
A coupled deep learning and DEM modelling approach for transverse crack prediction in UD-GFRP composites
Gu, Z., Kong, X., Liu, J., Ding, X. & Hou, X., 18/08/2025, In: Composites Science and Technology. 269, p. 111234 111234.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Liquid-liquid phase equilibria in nicotine (aqueous) solutions
Grozdanic, N. D., Najdanovic, V., Kijevcanin, M. L., Serbanovic, S. P., da Ponte, M. N. & Visak, Z. P., 25/11/2011, In: Fluid Phase Equilibria. 310, 1-2, p. 198-206 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Development of a remote access facility for a PLL test course.
Grout, I., Murphy, J., Burbidge, M., Bell, G. & Manners, A., 2005, In: International Journal of Online Engineering. 1, 2
Research output: Contribution to Journal/Magazine › Journal article
Published
Development of a remote access facility for a PLL test course.
Grout, I., Murphy, J., Burbidge, M., Bell, G. & Manners, A., 2005, Proceedings of the remote experimentation and virtual instrumentation symposium.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Mixed-signal custom IC control processors incorporating design for test/self-test.
Grout, I., Burge, S. E. & Winsby, A. J., 09/1998, IEE Colloquium on DSP Chips in Real Time Measurement and Control (Digest No: 1997/301). Leicester: IEEE, p. 1/1-1/4
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Application specific integrated circuit processors for discrete-time control.
Grout, I. A., Burge, S. E. & Dorey, A. P., 1994, Proceedings of the Irish DSP and control colloquium. Dubai, p. 277-282 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The design and testing of a PI controller ASIC.
Grout, I. A., Burge, S. E. & Dorey, A. P., 1995, In: Microprocessors and Microsystems. 19, 1, p. 15-22 8 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
ASICs for monitoring and controlling electric motors.
Grout, I. A., Burge, S. E. & Dorey, A. P., 1994, Application Specific Integrated Circuits for Measurement Systems, IEE Colloquium on. IET Press, p. 10/1-10/4 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Powder Characterization – Methods, Standards and State of the Art
Groarke, R., Vijayaraghavan, R. K., Powell, D., Rennie, A. & Brabazon, D., 1/06/2021, Fundamentals of Laser Powder Bed Fusion of Metals. Yadroitsev, I., Yadroitsava, I., Du Plessis, A. & MacDonald, E. (eds.). Elsevier, p. 491-527 37 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Droplet Sizes in Micromultions
Grimson, M. J. & Honary, F., 21/05/1984, In: Physics Letters A. 102, 5-6, p. 241-244 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A flexible streaming software architecture for scientific instruments
Grill, M., Barratt, K. & Honary, F., 13/02/2010, In: Earth Science Informatics. p. 1-7 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A new imaging riometer based on Mills Cross technique
Grill, M., Honary, F., Nielsen, E., Hagfors, T., Dekoulis, G., Chapman, P. & Yamagishi, H., 07/2003, p. 26-31. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Other
Published
Two new approaches to spatial interpolation with inherent sidelobe suppression for imaging riometers
Grill, M., Senior, A., Honary, F. & Kosch, M. J. (Editor), 12/2005, p. 23-36. 14 p.
Research output: Contribution to conference - Without ISBN/ISSN › Other
Published
Time-of-flight spectrometry of the spontaneous fission neutron emission of Cm-244 and Cf-252 using EJ-309 liquid scintillators
Grievson, A., 2020, Lancaster University. 178 p.
Research output: Thesis › Doctoral Thesis
Published
Time-of-Flight Spectroscopy of 252 Cf Spontaneous Fission Neutrons: Influences of Detector Voltage, Pulse-Shape Discrimination and Shielding
Grievson, A., Taylor, C. J., Roberts, N. J., Bunce, M. & Joyce, M., 12/08/2021, 2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC). IEEE, 4 p. 19. (IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Machine Learning for Additive Manufacturing
Grierson, D., Rennie, A. & Quayle, S., 19/07/2021, In: Encyclopedia. 1, 3, p. 576-588 13 p.
Research output: Contribution to Journal/Magazine › Literature review › peer-review
Published
Neptunium (V) oxidation by nitrous acid in nitric acid
Gregson, C., Boxall, C., Carrott, M., Edwards, S., Sarsfield, M., Taylor, R. & Woodhead, D., 2012, In: Procedia Chemistry. 7, p. 398-403 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Raman spectroscopy and machine learning for diagnosis and monitoring of cancer
Greenop, M., Meza Ramirez, C. A. & Rehman, I. U., 28/02/2023, Optical Spectroscopy and Imaging for Cancer Diagnostics: Fundamentals, Progress, and Challenges. Melikechi, N. (ed.). World Scientific Publishing, p. 256-298 43 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Analysis and monitoring of single HaCaT cells using volumetric Raman mapping and machine learning
Greenop, M., 6/01/2024, Lancaster University. 249 p.
Research output: Thesis › Doctoral Thesis
Published
XPS characterisation of surface modified Ni-Ti shape memory alloy
Green, S. M., Grant, D. M. & Wood, J. V., 31/03/1997, In: Materials Science and Engineering: A. 224, 1–2, p. 21-26 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of N+ ion implantation on the shape-memory behaviour and corrosion resistance of an equiatomic Ni Ti alloy
Green, S. M., Grant, D. M., Wood, J. V., Johanson, A., Johnson, E. & Sarholt-Kristensen, L., 1993, In: Journal of Materials Science Letters. 12, 9, p. 618-619 2 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Powder metallurgical processing of Ni-Ti shape memory alloy
Green, S. M., Grant, D. M. & Kelly, N. R., 1997, In: Powder Metallurgy. 40, 1, p. 43-47 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Shape Memory Transformation in Mechanically Alloyed Ni-50at % Ti
Green, S. M., Grant, D. M. & Wood, J. V., 1997, In: Journal de Physique 4. 07, C5, p. 351-356 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Surface performance of a Ni-Ti shape memory alloy
Green, S., Grant, D. M. & Wood, J. V., 1995, Proceedings of SMST-94 : the First International Conference on Shape Memory and Superelastic Technologies, March 7-10, 1994, Asilomar Conference Center, Pacific Grove, California. Pelton, A. R., Hodgson, D. & Duerig, T. W. (eds.). Monterey, Calif.: Published under the aegis of the Organizing Committee of SMST-94, p. 91-96 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Cytomcompatibility evaluation of surface modified Ni-Ti shape memory alloy using the MTT assay
Green, S., Grant, D. M. & Wood, J. V., 2000, Processing and fabrication of advanced materials VIII : proceedings of a symposium ... September 8-10, 1999, Mandarin Hotel, Orchard Road, Singapore . Khor, K. A. (ed.). Singapore: World Scientific Publishing, p. 141-148 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Comparative analysis of bone cement fracture surfaces
Green, S., Liu, C., Watkins, N. D. & McCaskie, A. W., 2000, 11th International Conference on Deformation, Yield and Fracture of Polymers : 10 - 13 April 2000, Churchill College, Cambridge, UK.. Cambridge : IOM communications, p. 325-328 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The absence of nanometre sized UHMWPE wear particles retrieved from ex-vivo tissue
Green, S., Elfick, A. P. & Unsworth, A., 2001, Trans 4th Combined meeting Orthopaedic Research Societies of the USA, Europe Canada and Japan. Chicago, Ill. : Orthopaedic research society, p. 93 1 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
How size affects the mobility of THR wear debris
Green, S., Elfick, A. P. D. & Liu, C., 2001, European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001.. London: European Society for Biomaterials, p. T41
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
Compression failure mode of two CMW bone cements
Green, S., Liu, C., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 2001, European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001.. London: European Society for Biomaterials, p. P51
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
The dependence of recovery behaviour on mechanical properties of bone cement
Green, S., Liu, C., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 2000, PIMS 2000 : 9th International Conference on Polymers in Medicine & Surgery, 11 - 13 September 2000, Danube University, Krems, Austria. London: IOM communications, p. 89
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
In vitro wear performance of MTP prostheses evaluated on a multi-station metatarso-phalangeal joint simulator
Green, S., Joyce, T., Lee, S. & Unsworth, A., 2007, Proceedings 8th EFORT Congress. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology, p. F837
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Cement pressurisation in flanged and unflanged acetabular cups
Green, S., Attar, F. G., Bhattacharya, R. & Port, A., 2007, Proceedings 8th EFORT Congress, Florence, Italy. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology, p. P486
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Wear analysis of failed acetabular polyethylene: A comparison of analytical methods
Green, S., Chuter, G. S. J., Cloke, D. J., Mohamed, A. & Partington, P. F., 2007, Proceedings 8th EFORT Congress, Florence. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Fixation strength of cemented Birmingham (HA coated, cementless) cups - a biomechanical study
Green, S., Kadakia, A. & Partington, P. F., 2007, Proceedings 8th EFORT congress, Florence, Italy. European Federation of National Associations of Orthopaedics and Traumatology
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Wear performance of silastic prostheses tested on a novel metatarsophalangeal joint simulator
Green, S., Lee, S., Joyce, T. & Unsworth, A., 2006, p. 35. 1 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Selective laser melting for near net-shape manufacturing: Investigation into structure-parameter relationships and phase determination by X-ray diffraction in stainless steel alloy systems
Green, S., OMeara, N. & Rennie, A., 2011. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Motivation of engineering students-considerations for programme design
Green, S. & Meyer, J., 2010, p. P062. 9 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Restrained creep of CMW2000 Bone Cement
Green, S., Liu, C., Watkins, N. D., McCaskie, A. W. & Gregg, P. J., 2002, p. T84. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
The morphology of UHMWPE wear debris released from shoulder prostheses
Green, S., Elfick, A. P., Frostick, S. P. & Unsworth, A., 2002, p. 105. 1 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Wear evaluation of retrieved, failed uncemented UHMWPE prostheses
Green, S., Mahomed, A., Cloke, D. J., Chuter, G. S. J. & Partington, P. F., 2006, p. T95. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Design and development of a novel multistation MTP joint simulator for in vitro testing
Green, S., Lee, S., Joyce, T. & Unsworth, A., 2006, p. P137.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Deformation of materials
Green, S. M., 02/2006, In: Current Orthopaedics. 20, 1, p. 9-15 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Ion beam modification of Ti6Al4V alloy for TJR
Green, S., Boampong, D. K. & Unsworth, A., 2002, p. L68.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Migration of a cemented hip joint prosthesis within a novel composite femur
Green, S., Gregg, P., Liu, C., Watkins, N. D. & McCaskie, A. W., 2002, International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
AFM measurement of nanoscale topographical and material wear features
Green, S., Elfick, A. P. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/032
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The influence of radial clearance and wear testing on the tribology of alumina-alumina total hip prostheses
Green, S., Scholes, S. C. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/037
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Nanoscale wear degradation of alumina femoral head bearing surfaces assessed using an atomic force microscope
Green, S., Scholes, S. C. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/036
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
On the influence of protein adsorption to phagocytosis of model polyethylene particles
Green, S., Elfick, A. P., Birch, M. A. & McCaskie, A. W., 2002, International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. L27
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Cytocompatibility evaluation of surface modified Ni-Ti shape memory alloy using the MTT assay
Green, S. M., Grant, D. M. & Wood, J. V., 25/04/2000, In: Biomedical Engineering - Applications, Basis and Communications. 12, 2, p. 55-59 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A theoretical and computational study of lithium-ion battery thermal management for electric vehicles using heat pipes
Greco, A., Cao, D., Jiang, X. & Yang, H., 07/2014, In: Journal of Power Sources. 257, p. 344-355 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An investigation of lithium-ion battery thermal management using paraffin/porous-graphite-matrix composite
Greco, A., Jiang, X. & Cao, D., 15/03/2015, In: Journal of Power Sources. 278, p. 50–68 19 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Numerical and analytical modelling of battery thermal management using passive cooling systems
Greco, A., 2016, Lancaster University. 187 p.
Research output: Thesis › Doctoral Thesis
Published
A coupled thermal and electrochemical study of lithium-ion battery cooled by paraffin/porous-graphite-matrix composite
Greco, A. & Jiang, X., 31/05/2016, In: Journal of Power Sources. 315, p. 127-139 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
YODA : the stomatal switch.
Gray, J. E. & Hetherington, A. M., 22/06/2004, In: Current Biology. 14, 12, p. R488-R490
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Molecular dynamics simulations of radiation damage in YBa2Cu3O7
Gray, R., Rushton, M. J. D. & Murphy, S. T., 7/02/2022, In: Superconductor Science and Technology. 35, 3, 16 p., 035010.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Spatially dispersive inhomogeneous dielectric wire media with periodic structure
Gratus, J., McCormack, M. & Letizia, R., 30/07/2015, Proceedings of PIERS 2015 in Prague, July 6-9, 2015. Cambridge, Mass.: The Electromagnetics Academy, p. 675-680 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Customised mode profiles using functional materials
Gratus, J., Kinsler, P., Letizia, R. & Boyd, T., 14/07/2016, In: arxiv.org.
Research output: Contribution to Journal/Magazine › Journal article
Published
Electromagnetic mode profile shaping in waveguides
Gratus, J., Kinsler, P., Letizia, R. & Boyd, T., 30/01/2017, In: Applied Physics A. 123, 6 p., 108.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Subwavelength mode profile customisation using functional materials
Gratus, J., Kinsler, P., Letizia, R. & Boyd, T., 6/09/2017, In: Journal of Physics Communications. 1, 2, 8 p., 025003.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The surface performance of shot peened and ion implanted NiTi shape memory alloy
Grant, D. M., Green, S. M. & Wood, J. V., 03/1995, In: Acta Metallurgica et Materialia. 43, 3, p. 1045-1051 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...38 39 40 41 42 43 44 45 ...66 Next

Research

School of Engineering

Quick Links

Connect With Us