School of Engineering

View graph of relations

Faculty of Science and Technology

Show 14 centres, groups and clusters

Hide 14 centres, groups and clusters

4201 - 4300 out of 6,559Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Publication date

2011
Published
Microfabrication of flexible large-area terahertz fishnet metamaterials
Shah, C. M., Sriram, S., Bhaskaran, M., Khodasevych, I. E., Withayachumnankul, W., Ung, B. S. Y., Lin, H., Abbott, D. & Mitchell, A., 2011.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Minimax-LQG control of a flexible plate using frequency domain subspace identified models
Ahmadizadeh, S., Montazeri, A., Poshtan, J., Mahjoob, M. J. & Kamaldar, M., 2011, Mechatronics (ICM), 2011 IEEE International Conference on. IEEE, p. 265-270 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Modeling neutron interactions and charge collection in the Imaging Single-Event Effects Monitor
Cai, X. X. & Platt, S. P., 2011, In: IEEE Transactions on Nuclear Science. 58, 3, p. 910-915 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modeling of large plastic deformation behavior and anisotropy evolution in cold rolled bcc steels using the viscoplastic φ-model-based grain-interaction
M'Guil, S., Wen, W., Ahzi, S. & Gracio, J. J., 2011, In: Materials Science and Engineering: A. 528, 18, p. 5840-5853 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modelling generalisation and power dissipation of flexible-wheel suspension concept for planetary surface vehicles
Cao, D., Khajepour, A. & Song, X., 2011, In: Vehicle System Dynamics. 49, 8, p. 1299-1320 22 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multi-scale modelling of damage progression in FRC laminates - Applications of DEM
Yang, D., Sheng, Y., Ye, J. & Tan, Y., 2011, Particle-Based Methods II: Fundamentals and Applications. Onate, E. & Owen, D. R. J. (eds.). Barcelona: International Center for Numerical Methods in Engineering (CIMNE), p. 256-263 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Near-field & far-field modelling of a sub-wavelength THz source
Lin, H., Fumeaux, C., Fischer, B. M. & Abbott, D., 2011, Infrared, Millimeter and Terahertz Waves (IRMMW-THz), 2011 36th International Conference on. IEEE, 2 p. 6104774
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Nonlinear compression behavior of warp-knitted spacer fabric: effect of sandwich structure
Hou, X., Hu, H., Liu, Y. & Silberschmidt, V., 2011, In: Computers, Materials & Continua. 23, 2, p. 119-134 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Numerical Modelling of Damage Progression in Single-fiber Composite under Axial Tension
Yang, D., Sheng, Y., Ye, J., Tan, Y. & Jiang, S., 2011, In: Advanced Materials Research. 268-270, p. 280-285 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Prediction of multipactor in the iris region of rf deflecting mode cavities
Burt, G. & Dexter, A., 2011, In: Physical Review Special Topics: Accelerators and Beams. 14, 12, 11 p., 122002.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Product Optimization by Rapid Manufacturing and Targeted Functional Analysis
Lupeanu, M., Rennie, A., Neagu, C. & Celik, K., 2011, 16th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 14 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Proportional-integral-plus control of robotic excavator arm utilising state-dependent parameter model
Gu, J., Feng, Z.-H., Ma, X. & Ni, J.-F., 2011, In: Applied Mechanics and Materials. 48-49, p. 1323-1327 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Realistic Modeling of High Rise Structures subjected to Progressive Collapse
Stephen, D., Ye, J. & Lam, D., 2011, The Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, Crete, Greece..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Real-time digital imaging of neutrons and gamma rays with a fast liquid scintillator detector
Gamage, K. & Joyce, M., 2011. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Speech
Published
Real-time digital pulse-shape discrimination in non-hazardous fast liquid scintillation detectors: prospects for safety and security
Joyce, M. & Aspinall, M., 2011. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Real-time, digital pulse-shape discrimination in non-hazardous fast liquid scintillation detectors: Prospects for safety and security
Joyce, M. J., Aspinall, M. D., Cave, F. D. & Lavietes, A. D., 2011, ANIMMA 2011 - Proceedings: 2nd International Conference on Advancements in Nuclear Instrumentation, Measurement Methods and their Applications. IEEE
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Ride dynamic evaluations and design optimisation of a torsio-elastic off-road vehicle suspension
Pazooki, A., Cao, D., Rakheja, S. & Boileau, P.-E., 2011, In: Vehicle System Dynamics. 49, 9, p. 1455-1476 22 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Selective laser melting for near net-shape manufacturing: Investigation into structure-parameter relationships and phase determination by X-ray diffraction in stainless steel alloy systems
Green, S., OMeara, N. & Rennie, A., 2011. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Semi-Active Suspension Design for Enhancing Vehicle Ride, Road-Friendliness and Braking Performance
Cao, D. & Khajepour, A., 2011. 10 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Simulation guided design of a cryogenic probe for micrometer-scale in vivo MR imaging
Hu, B., Glover, P. & Benson, T., 2011, Computational Problem-Solving (ICCP), 2011 International Conference on. IEEE, p. 647-651 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Smart pipes-instrumented water pipes, can this be made a reality?
Metje, N., Chapman, D. N., Cheneler, D., Ward, M. & Thomas, A. M., 2011, In: Sensors. 11, 8, p. 7455-7475 21 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Special issue on advanced vehicle handling dynamics and control
Cao, D., Rakheja, S. & Yang, X., 2011, In: International Journal of Vehicle Design. 56, 1-4, p. 1-3 3 p.
Research output: Contribution to Journal/Magazine › Editorial
Published
Spray Deposited Lithium-doped Zinc Oxide Thin-film Transistors with Electron Mobility Exceeding 50 cm2/Vs
Adamopoulos, G., Bradley, D. & Anthopoulos, T., 2011.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
State dependent feed-forward control for wave energy conversion
Cross, P., Taylor, J. & Aggidis, G., 2011, 9th European Wave and Tidal Energy Conference. EWTEC
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Strong coupling between intersubband transitions and surface plasmons sustained by a metallic grating
Zanotto, S., Degl'Innocenti, R., Biasiol, G., Sorba, L. & Tredicucci, A., 2011, Quantum Electronics and Laser Science Conference, QELS 2011.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Sub-wavelength THz source modelling
Lin, H., Fumeaux, C., Fischer, B. M. & Abbott, D., 2011.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Synthesis of fatty acid methyl esters via direct transesterification with methanol/carbon dioxide mixtures from spent coffee grounds feedstock
Calixto, F., Fernandes, J., Couto, R., Hernandez, E. J., Najdanovic-Visak, V., Simoes, P. C. & Najdanovic-Visak, V., 2011, In: Green Chemistry. 13, 5, p. 1196-1202 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The advancement of a technique using principal component analysis for the non-intrusive depth profiling of radioactive contamination
Adams, J., Mellor, M. & Joyce, M., 2011. 5 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
The design and calibration of a phantom for depth profiling measurements of entrained radioactivity in silica-based media
Shippen, A. & Joyce, M., 2011, In: Nuclear Engineering and Design. 241, 2, p. 526-532 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The determination of the depth of localised radioactive contamination by 137Cs and 60Co in sand with principal component analysis
Adams, J., Mellor, M. & Joyce, M., 2011, In: Environmental Science and Technology. 45, 19, p. 8262-8267 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The impact of hybrid and electric powertrains on vehicle dynamics and control systems
Crolla, D. & Cao, D., 2011.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
The influence of wetting on the buoyancy of particles
Bowen, J., Cheneler, D., Ward, M. & Adams, M., 2011.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
The measurement and analysis of the adhesion arising from non-Newtonian liquid bridges
Adams, M., Bowen, J., Cheneler, D., Avery, A. & Zhang, Z., 2011.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Urban bus driver ride and road-friendliness. Part I: model development and role of operating parameters
Rakheja, S., Cao, D. & Wang, Z., 2011, In: International Journal of Vehicle Design. 57, 4, p. 305-332 28 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Urban bus driver ride and road-friendliness. Part II: subjective suspension damping tuning and objective optimization
Cao, D., Rakheja, S. & Wang, Z., 2011, In: International Journal of Vehicle Design. 57, 4, p. 333-358 26 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2010
Published
Triangulating the height of cosmic noise absorption: A method for estimating the characteristic energy of precipitating electrons
Wild, P., Honary, F., Kavanagh, A. J. & Senior, A., 21/12/2010, In: Journal of Geophysical Research. 115, A12326, p. 1-11 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Subwavelength vortical plasmonic lattice solitons
Ye, F., Mihalache, D., Hu, B. & Panoiu, N. C., 16/12/2010, In: Optics Letters. 36, 7, p. 1179-1181 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Photocatalytic initiation of electroless deposition
Bromley, M. A., Boxall, C., Galea, S., Goodall, P. S. & Woodbury, S., 15/12/2010, In: Journal of Photochemistry and Photobiology A: Chemistry. 216, 2-3, p. 228-237 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The development of a method for the simultaneous measurement of cerium (iv) and chromium (vi) species in nitric acid media
Nickson, I. D., Boxall, C., Jackson, A. & Whillock, G. O. H., 12/12/2010, ASME 12th International Conference on Environmental Remediation and Radioactive Waste Management (ICEM09): Volume 1: Low/Intermediate-Level Waste Management; Spent Fuel, Fissile, Transuranic, High-Level Waste Management. NEW YORK: AMER SOC MECHANICAL ENGINEERS, p. 163-169 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Intersubband polaritons in a one-dimensional surface plasmon photonic crystal
Zanotto, S., Biasiol, G., Degl'Innocenti, R., Sorba, L. & Tredicucci, A., 6/12/2010, In: Applied Physics Letters. 97, 23, 3 p., 231123.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Enolate amination and derivatization of a pyrroloisoquinoline template: Towards novel peptidomimetics
Allin, S. M., Towler, J., Gaskell, S. N., Saha, B., Martin, W. P., Page, P. C. B. & Edgar, M., 4/12/2010, In: Tetrahedron. 66, 49, p. 9538-9544 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
Analysis and verification of fuel exhaust emissions.
Ma, X., 2/12/2010, (Unpublished) 12 p.
Research output: Working paper
Published
Active minimization of periodic sound inside a vibro-acoustic rectangular enclosure using finite element model
Mohamady, S., Montazeri, A. & Ahmad, R. K. R., 1/12/2010, 39th International Congress on Noise Control Engineering 2010, INTER-NOISE 2010. p. 280-289 10 p. (39th International Congress on Noise Control Engineering 2010, INTER-NOISE 2010; vol. 6).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Use of an injection locked magnetron to drive a superconducting RF cavity
Wang, H., Davis, K., Rimmer, R., Tahir, I., Dexter, A. C., Burt, G. & Carter, R. G., 1/12/2010, IPAC 2010 - 1st International Particle Accelerator Conference. p. 4026-4028 3 p. (IPAC 2010 - 1st International Particle Accelerator Conference).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Computer aided material selection for additive manufacturing materials
Smith, P. & Rennie, A., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 209-213 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Digital approaches to field neutron spectrometry.
Hawkes, N., Akurugoda Gamage, K. A. & Taylor, G., 12/2010, In: Radiation Measurements. 45, 10, p. 1305-1308 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Optimizing the shape of a surge-and-pitch wave energy collector using a genetic algorithm
McCabe, A. P., Aggidis, G. A. & Widden, M. B., 12/2010, In: Renewable Energy. 35, 12, p. 2767-2775 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid design, prototyping and manufacturing
Rennie, A., Aitchison, D. (Editor) & Jacobson, D. M., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 181-181 1 p.
Research output: Contribution to Journal/Magazine › Editorial
Published
The costs of small-scale hydro power production: Impact on the development of existing potential.
Aggidis, G. A., Luchinskaya, E., Rothschild, R. & Howard, D. C., 12/2010, In: Renewable Energy. 35, 12, p. 2632-2638 7 p., 35 .
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microstructure effects on transverse cracking in composite laminae by DEM
Sheng, Y., Yang, D., Tan, Y. & Ye, J., 30/11/2010, In: Composites Science and Technology. 70, 14, p. 2093-2101 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Two-step evolution of auroral acceleration at substorm onset
Morioka, A., Miyoshi, Y., Miyashita, Y., Kasaba, Y., Misawa, H., Tsuchiya, F., Kataoka, R., Kadokura, A., Mukai, T., Yumoto, K., Menietti, D. J., Parks, G., Liou, K., Honary, F. & Donovan, E., 19/11/2010, In: Journal of Geophysical Research. 115, A11213, p. 1-21 21 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Investigations into beam-plasma interactions
Constable, D. A., 12/11/2010.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Modal analysis of agricultural machineries using finite element method: a case study for a V-belt pulley of a fodder crushing machine
Celik, H. K., Topakci, M., Canakci, M., Rennie, A. & Akinci, I., 12/11/2010, In: Journal of Food, Agriculture and Environment. 8, 3-4, p. 439-446 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Spray-Deposited Li-Doped ZnO Transistors with Electron Mobility Exceeding 50 cm(2)/Vs
Adamopoulos, G., Bashir, A., Thomas, S., Gillin, W. P., Georgakopoulos, S., Shkunov, M., Baklar, M. A., Stingelin, N., Maher, R. C., Cohen, L. F., Bradley, D. D. C. & Anthopoulos, T. D., 9/11/2010, In: Advanced Materials. 22, 42, p. 4764-4769 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A computationally efficient adaptive IIR solution to active noise and vibration control systems
Montazeri, A. & Poshtan, J., 11/2010, In: IEEE Transactions on Automatic Control. 55, 11, p. 2671-2676 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Double-Corrugated Rectangular Waveguide Slow-Wave Structure for Terahertz Vacuum Devices
Mineo, M. & Paoloni, C., 11/2010, In: IEEE Transactions on Electron Devices. 57, 11, p. 3169-3175 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Feature detection and monitoring of eddy current imaging data by means of wavelet based singularity analysis.
Ma, X. & Peyton, A. J., 11/2010, In: NDT and E International. 43, 8, p. 687-694 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
On the calibration of rectangular atomic force microscope cantilevers modified by particle attachment and lamination
Bowen, J., Cheneler, D., Walliman, D., Arkless, S. G., Zhang, Z., Ward, M. C. L. & Adams, M. J., 11/2010, In: Measurement Science and Technology. 21, 11, 115106.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
Performance evaluation of Zeolite Rankine cycle systems using scroll expander for combined heat and electricity generation.
Ma, X., 28/10/2010, (Unpublished) 9 p.
Research output: Working paper
Published
Fidelity of energy spectra at neutron facilities for single-event effects testing
Platt, S. P., Prokofiev, A. V. & Xiao, C. X., 20/10/2010, 2010 IEEE International Reliability Physics Symposium, IRPS 2010. IEEE, p. 411-416 6 p. 5488795. (IEEE International Reliability Physics Symposium Proceedings).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Heterogeneous photocatalysed degradation of an insecticide derivative acetamiprid in aqueous suspensions of semiconductor
Khan, A., Haque, M. M., Mir, N. A., Muneer, M. & Boxall, C., 15/10/2010, In: Desalination. 261, 1-2, p. 169-174 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Deep water ROV design for the Mexican oil industry
Salgado-Jimenez, T., Gonzalez-Lopez, J. L., Martinez-Soto, L. F., Olguin-Lopez, E., Resendiz-Gonzalez, P. A. & Bandala-Sanchez, M., 14/10/2010, OCEANS'10 IEEE Sydney, OCEANSSYD 2010. 5603516. (OCEANS'10 IEEE Sydney, OCEANSSYD 2010).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The Design, Build and Test of a Digital Analyzer for Mixed Radiation Fields.
Joyce, M. J., Aspinall, M., Cave, F. D., Georgopoulos, K. & Jarrah, Z., 14/10/2010, In: IEEE Transactions on Nuclear Science. 57, 5, p. 2625-2630 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Wavelet Packet Transform Inspired Method of Neutron-Gamma Discrimination.
Shippen, D. I., Joyce, M. J. & Aspinall, M., 10/2010, In: IEEE Transactions on Nuclear Science. 57, 5, p. 2617-2624 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An on-line monitoring technique for electrode degradation in bio-fluidic microsystems.
Al-Gayem, Q., Liu, H., Richardson, A. M. D., Burd, N. & Kumar, M., 10/2010, Proceedings of the 2010 IEEE International Test Conference (ITC). Austin, Texas: IEEE, p. 1-10 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
State dependent control of a robotic manipulator used for nuclear decommissioning activities.
Taylor, C. J., Chotai, A. & Robertson, D., 10/2010, IEEE RSJ International Conference on Intelligent Robots and Systems IROS 2010. Taipei, Taiwan, p. 2413-2418 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A novel cylindrical TE2,1 mode converter
Constable, D., Ronald, K., He, W., Fampris, X. S., Whyte, C. G. & Robertson, C. W., 17/09/2010, In: Review of Scientific Instruments. 81, 9, 10 p., 094702.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Cross-stiffened circular plates: an elasto-plastic large deflection analysis
Turvey, G., 14/09/2010.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effects of bonded splice joints on the flexural response of pultruded fibre reinforced polymer beams
Turvey, G., 7/09/2010. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Cascaded distributed power amplifier with non-identical transistors and inter-stage tapered impedance
Narendra, K., Limiti, E., Paoloni, C., Collantes, J.-M. & Jansen, R. H., 1/09/2010, Microwave Conference (EuMC), 2010 European. IEEE, p. 990 -993 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Captain toolbox analysis of the hyperfast switching peltier cooling system benchmark.
Taylor, C. J. & Young, P. C., 09/2010, UKACC International Conference Control 2010. Burnham, K. J. & Ersanilli, V. E. (eds.). p. 1082-1087 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Continuous-time feed-forward proportional-integral-plus control.
Cross, P., Taylor, C. J. & Aggidis, G. A., 09/2010, UKACC International Conference Control 2010. Burnham, K. J. & Ersanilli, V. E. (eds.). p. 229-234 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Digital approaches to field neutron spectrometry-NPL Report IR 23.
Akurugoda Gamage, K. A., Hawkes, N. & Taylor, G., 09/2010, National Physical Laboratory.
Research output: Working paper
Published
Effect of build orientation on FDM parts: a case study for validation of deformation behaviour by FEA
Hambali, R. H., Celik, K., Smith, P., Rennie, A. & Ucar, M., 09/2010, International Conference on Design and Concurrent Engineering (iDECON 2010): Manufacturing Challenges Towards Global Sustainability. Penerbit Universiti (UTeM), p. 224-228 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Multi-objective evolutionary optimisation of the geometry of a class of controlled wave energy converter.
Gunn, K., Lingwood, C. & Taylor, C. J., 09/2010, UKACC International Conference Control 2010. Burnham, K. J. & Ersanilli, V. E. (eds.). p. 349-354 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Nonlinear control by input-output pole assignment: state space derivation.
Taylor, C. J. & Chotai, A., 09/2010, UKACC International Conference Control 2010. Burnham, K. J. & Ersanilli, V. E. (eds.). p. 1076-1081 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Skills development of employees at SMEs in the construction sector in the North of England
Ganah, A. & Rennie, A., 09/2010, The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors (COBRA 2010): Proceedings of. Royal Institution of Chartered Surveyors (RICS), 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Structural optimisation of a subsoiler
Topakci, M., Celik, H. K., Canakci, M., Karayel, D. & Rennie, A., 09/2010, In: Pakistan Journal of Scientific and Industrial Research. 53, 5, p. 281-287 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Use of FDM in an undergraduate student project: design, build and test a model wind turbine
Widden, M., Gunn, K. & Rennie, A., 09/2010, 3rd International Conference on Additive Technologies (iCAT 2010); DAAAM Specialized Conference. DAAAM International, 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Air-Stable Solution-Processed Hybrid Transistors with Hole and Electron Mobilities Exceeding 2 cm(2) V-1 s(-1)
Smith, J., Bashir, A., Adamopoulos, G., Anthony, J. E., Bradley, D. D. C., Hamilton, R., Heeney, M., McCulloch, I. & Anthopoulos, T. D., 24/08/2010, In: Advanced Materials. 22, 32, p. 3598-3602 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Method for direct treatment of cork stoppers, using supercritical fluids
Najdanovic-Visak, V. (Inventor), de Magalhaes Nunes da Ponte, M. L. (Inventor), da Silva Lopes, J. A. (Inventor), Manic, M. (Inventor), de Avelar Lopes Cardoso Mesquita, A. C. (Inventor), Moreira da Silva, R. P. (Inventor) & de Queroz Montenegro Sollari Allegro, I. M. (Inventor), 19/08/2010, Patent No. WO/2010/093273
Research output: Patent
Published
Finite element modelling of shear connection behaviour in a push test using profiled sheeting
Qureshi, J., Lam, D. & Ye, J., 16/08/2010, Advances and Trends in Structural Engineering, Mechanics and Computation - Proceedings of the 4th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2010. CRC Press/Balkema, p. 679-682 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Vectorially combined distributed power amplifier with load pull impedance determination
Narendra, K., Limiti, E., Paoloni, C., Collantes, J. M., Jansen, R. H. & Yarman, B. S., 5/08/2010, In: Electronics Letters. 46, 16, p. 1137-1138 2 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Control of a dual-arm robotic manipulator
Taylor, C. J. & Seward, D., 08/2010, In: Nuclear Engineering International. 55, 673, p. 24-26 3 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Discrete element modeling of the microbond test of fiber reinforced composite
Yang, D., Sheng, Y., Ye, J. & Tan, Y., 08/2010, In: Computational Materials Science. 49, 2, p. 253-259 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rayleigh Taylor instability in a dusty plasma
Sen, S., Fukuyama, A. & Honary, F., 08/2010, In: Journal of Atmospheric and Solar-Terrestrial Physics. 72, 13, p. 938-942 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The Fender Stratocaster electric guitar: a case study for both non-transferable and transferable skills learning in a generalist electronic engineering cohort
Joyce, M., 08/2010, In: IEEE Transactions on Education. 53, 3, p. 397-404 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Components for the testing of a co-harmonic gyrotron cavity
Constable, D. A., Ronald, K., He, W., Fampris, X. S., Phelps, A. D. R. & Cross, A. W., 15/07/2010.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Placing postgraduate research students at the heart of knowledge exchange: benefits for academia and industry
Lambert, C. & Rennie, A., 1/07/2010, Proceedings of the 3rd International Symposium for Engineering Education (ISEE2010): educating engineers for a changing world : leading transformation from an unsustainable global society. p. 485-493 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparison of carbon footprint calculations for end of life product recovery methods using PAS 2050
Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2010, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis: (ESDA 2010). ASME, 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Using additive manufacturing effectively: a CAD tool to support decision making
Smith, P. & Rennie, A., 07/2010, 36th International MATADOR Conference. Hinduja, S. & Li, L. (eds.). Springer-Verlag, p. 381-384 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Narrow corrugation rectangular waveguide for terahertz TWTs
Mineo, M. & Paoloni, C., 24/06/2010, In: Electronics Letters. 46, 13, p. 927-928 2 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A digital method for the discrimination of neutrons and γ rays with organic scintillation detectors using frequency gradient analysis.
Liu, G., Joyce, M. J., Ma, X. & Aspinall, M., 06/2010, In: IEEE Transactions on Nuclear Science. 57, 3, p. 1682 -1691
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A new ultrahigh-strength stainless steel strengthened by various coexisting nanoprecipitates
Xu, W., Rivera-Díaz-Del-Castillo, P. E. J., Yan, W., Yang, K., San Martín, D., Kestens, L. A. I. & Van Der Zwaag, S., 06/2010, In: Acta Materialia. 58, 11, p. 4067-4075 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Active minimization of harmonic sound pressure in a vibro—acoustic finite element model of a rectangular enclosure
Mohamady , S. & Montazeri, A., 06/2010.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Analysis of existing Additive manufacturing material selectors
Hambali, R. H. & Rennie, A., 06/2010. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Computer Aided Material Selection (CAMS) for Additive Manufacturing Materials
Smith, P. & Rennie, A., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 55-61 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Corrugated Rectangular Waveguide Tunable Backward Wave Oscillator for Terahertz Applications
Mineo, M. & Paoloni, C., 06/2010, In: IEEE Transactions on Electron Devices. 57, 6, p. 1481-1484 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Electric vehicles: charged with potential
Kemp, R., Blythe, P., Brace, C., James, P., Parry-Jones, R., Thielens, D., Thomas, M., Wenham, R. & Urry, J., 06/2010, London: Royal Academy of Engineering. 52 p.
Research output: Book/Report/Proceedings › Book
Published
Fire responses and resistance of concrete-filled steel tubular frame structures
Yu, M., Zha, X., Ye, J. & Li, Y., 06/2010, In: International Journal of Structural Stability and Dynamics. 10, 2, p. 253-271 19 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...39 40 41 42 43 44 45 46 ...66 Next

Research

School of Engineering

Quick Links

Connect With Us