School of Engineering

View graph of relations

Faculty of Science and Technology

Show 10 centres, groups and clusters

Hide 10 centres, groups and clusters

6001 - 6050 out of 6,158Page size: 50

RSS feed of this list

Sort by: Title

Published
A dynamic model for the planetary bearings in a double planetary gear set
Liu, J., Li, X. & Xia, M., 1/07/2023, In: Mechanical Systems and Signal Processing. 194, 23 p., 110257.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A DXDR large deflection analysis of uniformly loaded square, circular and elliptical orthotropic plates using non-uniform rectangular finite-differences
Kadkhodayan, M., Alamatian, J., Turvey, G. & Erfani Moghadam, A., 10/2012, In: Journal of Mechanical Science and Technology. 26, 10, p. 3231-3242 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A dual-arm, hydraulically-actuated robot for operations within radiological environments
Albrecht, O., Monk, S. D., Bandala Sanchez, M., Montazeri, A. & Taylor, J., 1/10/2019.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
A digital partial built-in self-test structure for a high performance automatic gain control circuit
Lechner, A., Ferguson, J., Richardson, A. & Hermes, B., 1999, DESIGN, AUTOMATION AND TEST IN EUROPE CONFERENCE AND EXHIBITION 1999, PROCEEDINGS. Borrione, D. & Ernst, R. (eds.). LOS ALAMITOS: IEEE COMPUTER SOC, p. 232-238 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A digital method for the discrimination of neutrons and γ rays with organic scintillation detectors using frequency gradient analysis.
Liu, G., Joyce, M. J., Ma, X. & Aspinall, M., 06/2010, In: IEEE Transactions on Nuclear Science. 57, 3, p. 1682 -1691
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A digital approach to neutron-gamma imaging with a narrow tungsten collimator aperture and a fast organic liquid scintillator detector
Gamage, K., Joyce, M. & Taylor, G., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1223-1227 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Development and validation of the in-house hydrodynamics code and the DNV software for TALOS wave energy converter
Sheng, W., Michailides, C., Loukogeorgaki, E. & Aggidis, G., 2/09/2023, p. 1-8. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
A detailed thermodynamic analysis of [C(4)mim][BF4] plus water as a case study to model ionic liquid aqueous solutions
Rebelo, LPN., Najdanovic-Visak, V., Visak, Z. P., da Ponte, MN., Szydlowski, J., Cerdeirina, CA., Troncoso, J., Romani, L., Esperanca, JMSS., Guedes, HJR. & de Sousa, HC., 2004, In: Green Chemistry. 6, 8, p. 369-381 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A design-for-test structure for optimising analogue and mixed signal IC test
Bratt, A., Richardson, A. M. D., Harvey, R. & Dorey, A. P., 03/1995, European Design and Test Conference. IEEE, p. 24-33 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A design for testability study on a high performance automatic gain control circuit.
Lechner, A., Richardson, A. M. D., Hermes, B. & Ohletz, M., 1998, Proceedings of the 16th IEEE VLSI test symposium. IEEE, p. 376-385 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A Dependable Microelectronic Peptide Synthesizer Using Electrode Data
Richardson, A., Kerkhoff, H. G., Zhang, X., Mailly, F., Nouet, P. & Liu, H., 2008, In: VLSI Design. 2008, n/a, 9 p., 437879.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A DEM model for visualising damage evolution and predicting failure envelope of composite laminae under biaxial loads
Ismail, Y., Yang, D. & Ye, J., 1/10/2016, In: Composites Part B: Engineering. 102, p. 9-28 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
A DEM for visualising damage evolution and predicting failure of composite lamina under uniaxial and biaxial loads
Ismail, Y., 2017, (Unpublished) Lancaster University. 177 p.
Research output: Thesis › Doctoral Thesis
Published
A Data-Driven Statistical Approach for Monitoring and Analysis of Large Industrial Processes
Montazeri, A., Ansarizadeh, M. H. & Arefi, M., 31/12/2019, In: IFAC-PapersOnLine. 52, 13, p. 2354-2359 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Current-Source Modular Converter for Large-Scale Photovoltaic Systems
Alotaibi, S., 2023, Lancaster University. 225 p.
Research output: Thesis › Doctoral Thesis
Published
A criterion for the formation of high entropy alloys based on lattice distortion
Toda-Caraballo, I. & Rivera-Díaz-Del-Castillo, P. E. J., 1/04/2016, In: Intermetallics. 71, p. 76-87 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A creativity aid for designers.
French, M. J., Chaplin, R. V. & Langdon, P. M., 1993, Proceedings of ICED '93. Zurich: Heurista
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A coupled thermal and electrochemical study of lithium-ion battery cooled by paraffin/porous-graphite-matrix composite
Greco, A. & Jiang, X., 31/05/2016, In: Journal of Power Sources. 315, p. 127-139 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A coupled approach to weld pool, phase and residual stress modelling of laser direct metal deposition (LDMD) processes
Vogel, M., Khan, M., Ibarra-Medina, J., Pinkerton, A., N'Dri, N. & Megahed, M., 2013, 2nd World Congress on Integrated Computational Materials Engineering. Li, M., Campbell, C., Thornton, K., Holm, E. & Gumbsch, P. (eds.). Wiley, p. 231-236 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A cooperative management strategy for battery energy storage system providing enhanced frequency response
Cao, X. & Zhao, N., 30/04/2022, In: Energy Reports. 8, p. 120-128 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A control system for a new wave energy converter in irregular wave climates.
Aggidis, G. A., Rahmati, M. T., Chaplin, R. V., McCabe, A. P., Mingham, C. G., Causon, D. M. & Bhinder, M. A., 06/2009.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
A continuous-flow apprach to alkene epoxidation catalysed by Polystyrene 2-(Aminomethyl)Pyridine supported Mo(VI) complex
Saha, B., Mohammed, ML. & Mbeleck, R., 19/06/2016, 5th International Conference on Green Process Engineering (GPE 2016). Berruti, F. & Briens, C. (eds.). (An ECI Conference Series; vol. 16AG).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A continuous process for the liquid phase epoxidation of an olefinic compound
Saha, B., Ambroziak, K., Sherrington, DC. & Mbeleck, R., 17/04/2018, Patent No. Indian Patent No.: 295846
Research output: Patent
Published
A constitutive model for high strain rate deformation in FCC metals based on irreversible thermodynamics
Huang, M., Rivera-Díaz-del-Castillo, P. E. J., Bouaziz, O. & van der Zwaag, S., 09/2009, In: Mechanics of Materials. 41, 9, p. 982-988 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A condition monitoring system for an early warning of developing faults in wind turbine electrical systems
Ma, X., Cross, P. & Qian, P., 1/12/2016, In: Insight – Non-Destructive Testing and Condition Monitoring. 58, 12, p. 663-670 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A conceptual study for a computer-based tool to support electronics design in a mechatronic environment.
Bradley, D. A., Walters, R. M. & Dorey, A. P., 2000, In: Microprocessors and Microsystems. 24, 2, p. 51-61 11 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
A computer-controlled dynamic phantom for respiratory-gated medical radiotherapy research
Bandala, M. & Joyce, M., 07/2013, In: IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences . E96-A, 7, p. 1609-1616 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Computer Aided Design (CAD) support tool for parametric design of products for Rapid Manufacture (RM)
Smith, P. & Rennie, A., 10/2009, 4th International Conference on Advanced Research in Virtual and Rapid Prototyping: Proceedings of the . Leiria, Portugal: Taylor & Francis Group, p. 95-100 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A computationally efficient adaptive IIR solution to active noise and vibration control systems
Montazeri, A. & Poshtan, J., 11/2010, In: IEEE Transactions on Automatic Control. 55, 11, p. 2671-2676 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A computational study of preferential diffusion and scalar transport in nonpremixed hydrogen-air flame
Jiang, J., Jiang, X. & Zhu, M., 7/12/2015, In: International Journal of Hydrogen Energy. 40, 45, p. 15709-15722 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns.
Turvey, G. & Zhang, Y., 09/2006, In: Computers and Structures. 84, 22-23, p. 1527-1537 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comprehensive review on improving the production of rich-hydrogen via combined steam and CO2 reforming of methane over Ni-based catalysts
Farooqi, A. S., Yusuf, M., Mohd Zabidi, N. A., Saidur, R., Sanaullah, K., Khan, A. & Abdullah, B., 1/09/2021, In: International Journal of Hydrogen Energy. 46, 60, p. 31024-31040 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comprehensive review on advances of oil-based nanofluids for concentrating solar thermal collector application
Rubbi, F., Das, L., Habib, K., Aslfattahi, N., Saidur, R. & Alam, S. U., 15/09/2021, In: Journal of Molecular Liquids. 338, 37 p., 116771.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Comprehensive Review of Fine Chemical Production Using Metal-Modified and Acidic Microporous and Mesoporous Catalytic Materials
Lantos, J., Kumar, N. & Saha, B., 10/05/2024, In: Catalysts. 14, 41 p., 317.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Comprehensive Review of Distributed MPPT for Grid-Tied PV Systems at the Sub-Module Level
Alharbi, Y., Darwish, A. & Ma, X., 19/07/2023, In: Energies. 16, 14, p. 5468 23 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Comprehensive Business Model for Rapid Manufactured Products
Hasan, S. & Rennie, A., 10/2008, 19th International Symposium of the Danube-Adria-Association-for-Automation-and-Manufacturing - Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions. Vienna: DAAAM International, p. 591-592 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comprehensive analytical model for laser powder-fed additive manufacturing
Huang, Y., 31/10/2016, In: Additive Manufacturing. 12, A, p. 90-99
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A composite material with Poisson’s ratio tunable from positive to negative values: an experimental and numerical study
Hou, X., Hu, H. & Silberschmidt, V., 12/2013, In: Journal of Materials Science. 48, 24, p. 8493-8500 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Comparison of γ-ray Spectroscopy with Accelerator Mass Spectrometry for the Environmental Assay of Plutonium
Joyce, M. J., Tighe, C., Campbell, I., Christl, M., Degueldre, C., Iridoy, M. C., Semple, K. T. & Andrew, J., 5/09/2019, 2018 IEEE Nuclear Science Symposium and Medical Imaging Conference, NSS/MIC 2018 - Proceedings. IEEE, 3 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparison of the mechanical properties of a modified silorane based dental composite with those of commercially available composite material
Zakir, M., Kheraif, A. A. A. A., Asif, M., Wong, F. S. L. & Rehman, I. U., 2013, In: Dental Materials. 29, 4, p. e53-e59
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparison of the manufacture and mechanical performance of porous aluminium and aluminium syntactic foams made by vacuum-assisted casting
Cheneler, D. & Kennedy, A. R., 3/07/2020, In: Materials Science and Engineering A. 789, 9 p., 139527.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparison of plutonium abundance in soil from sites in the United Kingdom measured with high-efficiency, high-resolution γ-ray spectroscopy, neutron assay and accelerator mass spectrometry
Tighe, C., Christl, M., Degueldre, C., Andrew, J. & Joyce, M. J., 9/09/2018, Plutonium Futures: The Science 2018. San Diego: American Nuclear Society, p. 158-160 3 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparison of models of the isometric force of locust skeletal muscle in response to pulse train inputs
Wilson, E. D., Rustighi, E., Newland, P. L. & Mace, B. R., 03/2012, In: Biomechanics and modeling in mechanobiology. 11, 3-4, p. 519–532 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparison of MCNP6-1.0 and GEANT 4-10.1 when evaluating the neutron output of a complex real world nuclear environment: the thermal neutron facility at the Tri Universities Meson facility
Monk, S. D., Shippen, A., Colling, B. R., Cheneler, D., Al Hamrashdi, H. & Alton, T., 15/05/2017, In: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. 399, p. 48-61 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparison of laser additive manufacturing using gas and plasma-atomized Ti-6A1-4V powders
Ahsan, M. N., Pinkerton, A. J. & Ali, L., 2012, Innovative Developments in Virtual and Physical Prototyping. Bartolo, PJ., DeLemos, ACS., Tojeira, APO., Pereira, AMH., Mateus, AJ., Mendes, ALA., DosSantos, C., Freitas, DMF., Bartolo, HM., Almeida, HD., IM, D., Dias, JR., Domingos, MAN., Alves, NMF., Pereira, RFB., Patricio, TMF. & Ferreira, TMD. (eds.). Boca Raton: CRC PRESS-TAYLOR & FRANCIS GROUP, p. 625-633 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparison of Geant4 and MCNP for modelling liquid scintillators
Balmer, M., Gamage, K. & Taylor, G., 2013.
Research output: Contribution to conference - Without ISBN/ISSN › Speech
Published
A comparison of four different digital algorithms for pulse-shape discrimination in fast scintillators.
Gamage, K. A. A., Joyce, M. & Hawkes, N. P., 21/06/2011, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 642, 1, p. 78-83 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparison of cut path deviation with continuous and pulsed beam modes in diode laser chip-free cutting of glass
Nisar, S., Li, L., Sheikh, M. A. & Pinkerton, A. J., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 1070-1079 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparison of collimator geometries for imaging mixed radiation fields with fast liquid organic scintillators
Gamage, K., Joyce, M. & Taylor, G., 08/2012, In: IEEE Transactions on Nuclear Science. 59, 4, p. 1432-1437 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparison of collimator geometries for imaging mixed radiation fields with fast liquid organic scintillators
Akurugoda Gamage, K. & Joyce, M., 2011. 5 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

Previous 1...117 118 119 120 121 122 123 124 Next

Research

School of Engineering

Quick Links

Connect With Us