Home > Research > School of Engineering > Publications & Outputs
View graph of relations
  1. Published

    Design, optimization and characterization of freeze-dried emulsions based on sodium alginate and whey protein isolate intended for cosmetic and dermatological applications

    Prus-Walendziak, W., Douglas, T. & Kozlowska, J., 30/06/2025, In: ACS Omega. 10, 23, p. 24932-24949 18 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  2. Published

    Design, innovation and a new age for filtration

    Burns, N., Geekie, L., Travis, D., Burns, M. & Rennie, A., 06/2014.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  3. Published

    Design templates for consumer use in customising additive layer manufactured products

    Ariadi, Y. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 137-144 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  4. Published

    Design Study of Corrugated Waveguide Slow-Wave Structure for THz Amplification

    Mineo, M. & Paoloni, C., 2009, 2009 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, p. 104-105 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  5. Published

    Design Study of a High-Power Ka-Band High-Order-Mode Multibeam Klystron

    Cai, J., Syratchev, I. & Burt, G., 1/12/2020, In: IEEE Transactions on Electron Devices. 67, 12, p. 5736 - 5742 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  6. Published

    Design procedure for THz cascade backward wave amplifiers

    Mineo, M., Paoloni, C. & Durand, A. J., 04/2012, Vacuum Electronics Conference (IVEC), 2012 IEEE Thirteenth International. USA: IEEE, p. 235-236 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  7. Published

    Design procedure for monolithic matrix amplifier

    Paoloni, C. & DAgostino, S., 01/1997, In: IEEE Transactions on Microwave Theory and Techniques. 45, 1, p. 135-139 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  8. Published

    Design principles for mechatronic systems.

    Counsell, J. M., 1997, Computer aided conceptual design '97: proceedings of the 1997 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. M. (eds.). Lancaster: Lancaster University: Lancaster Engineering Design Centre, p. 17-26 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  9. Published

    Design optimisation of multistage depressed collectors for high efficiency travelling wave tubes using genetic algorithm.

    Ghosh, T. K. & Carter, R. G., 04/2002, Proceedings of the 3rd IEEE international vacuum electronics conference, IVEC 2002. IEEE, p. 158-159 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  10. Published

    Design optimisation of braided composite beams for lightweight rail structures using machine learning methods

    Singh, A., Gu, Z., Hou, X., Liu, Y. & Hughes, D. J., 15/02/2022, In: Composite Structures. 282, 12 p., 115107.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  11. Published

    Design of titanium alloys showing plasticity induced transformation

    Neelakantan, S., Rivera-Díaz-del-Castillo, P. E. J. & Van Der Zwaag, S., 2010, THERMEC 2009 Supplement. Vol. 89-91. p. 405-410 6 p. (Advanced Materials Research; vol. 89-91).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  12. Published

    Design of the pitch profile for high linearity helix TWT amplifiers.

    Jenkins, R. O. & Carter, R. G., 2001, Proceedings of a conference on displays and vacuum electronics.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  13. Published

    Design of the ILC crab cavity system.

    Carter, R., Adolphsen, C., Beard, C., Bellantoni, L., Burt, G., Chase, B., Church, M., Dexter, A., Dykes, M., Edwards, H., Goudket, P., Jenkins, R., Jones, R. M., Kalinin, A., Khabiboulline, T., Ko, K., Latina, A., Li, Z., Ma, P. & McIntosh, P. & 2 others, Ng, C. & Ser, I., 2006

    Research output: Other contribution

  14. Published

    Design of the High Luminosity Large Hadron Collider Crab Cavity Support System

    Jones, T., 30/03/2020, Lancaster University. 102 p.

    Research output: ThesisMaster's Thesis

  15. Published

    Design of the beam delivery system for the international linear collider

    Seryi, A., Amann, J., Arnold, R., Asiri, F., Bane, K., Bellomo, P., Doyle, E., Fasso, A., Jonghoon, K., Keller, L., Ko, K., Li, Z., Markiewicz, T., Maruyama, T., Moffeit, K., Molloy, S., Nosochkov, Y., Phinney, N., Raubenheimer, T. & Seletskiy, S. & 81 others, Smith, S., Spencer, C., Tenenbaum, P., Walz, D., White, G., Woodley, M., Woods, M., Xiao, L., Anerella, M., Jain, A., Marone, A., Parker, B., Delferriere, O., Napoly, O., Payet, J., Uriot, D., Watson, N., Agapov, I., Baldy, J. L., Schulte, D., Burt, G., Dexter, A., Buesser, K., Lohmann, W., Bellantoni, L., Drozhdin, A., Kashikhin, V., Kuchler, V., Lackowski, T., Mokhov, N., Nakao, N., Peterson, T., Ross, M., Striganov, S., Tompkins, J., Wendt, M., Yang, X., Enomoto, A., Kuroda, S., Okugi, T., Sanami, T., Suetsugu, Y., Tauchi, T., Del Carmen Alabau, M., Bambade, P., Brossard, J., Dadoun, O., Burrows, P., Christian, G., Clarke, C., Constance, B., Dabiri Khah, H., Hartin, A., Perry, C., Swinson, C., Ferrari, A., Blair, G., Boogert, S., Carter, J., Angal-Kalinin, D., Beard, C., Densham, C., Fernandez-Hernando, L., Greenhalgh, J., Goudket, P., Jackson, F., Jones, J., Kalinin, A., Ma, L., McIntosh, P., Yamamoto, H., Mattison, T., Carwardine, J., Saunders, C., Appleby, R., Torrence, E., Gronberg, J., Sanuki, T., Iwashita, Y., Telnov, V. & Warner, D., 1/12/2007, Proceedings of the IEEE Particle Accelerator Conference, PAC07. IEEE, p. 1985-1987 3 p. 4441135. (Proceedings of the IEEE Particle Accelerator Conference).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  16. Published

    Design of sub-THz traveling wave tubes for high data rate long range wireless links

    Basu, R., Billa, L. R., Letizia, R. & Paoloni, C., 30/10/2018, In: Semiconductor Science and Technology. 33, 12, 8 p., 124009.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  17. Published

    Design of Slow Wave Structure for G-band TWT for High Data Rate Links

    Basu, R., Billa, L., Mahadev Rao, J., Letizia, R. & Paoloni, C., 28/04/2019, 2019 International Vacuum Electronics Conference (IVEC). IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  18. Published

    Design of semiactive vehicle suspension controls in frequency domain

    Song, X. & Cao, D., 2009. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  19. Published

    Design of robust molecular electronic circuits.

    Lei, C., Pamunuwa, D. B., Bailey, S. & Lambert, C., 2009, IEEE International Symposium on Circuits and Systems, 2009. ISCAS 2009.. Taiwan: IEEE, p. 1819-1822 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  20. Published

    Design of phase-veolcity tapers in coupled-cavity TWTS.

    Srivastava, V. & Carter, R. G., 10/1991, In: IEE Proceedings H (Microwaves, Antennas and Propagation) . 138, 5, p. 469-474 6 p.

    Research output: Contribution to Journal/MagazineJournal article

  21. Published

    Design of paired column semisubmersible hull

    Odijie, C., 2016, Lancaster University. 205 p.

    Research output: ThesisDoctoral Thesis

  22. Published

    Design of minimax-linear quadratic Gaussian controller using the frequency domain subspace identified model of flexible plate

    Ahmadizadeh, S., Montazeri, A. & Poshtan, J., 04/2015, In: Journal of Vibration and Control. 21, 6, p. 1115-1143 29 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  23. Published

    Design of high-performance power-distributed amplifier using Lange couplers

    DAGOSTINO, S. & PAOLONI, C., 12/1994, In: IEEE Transactions on Microwave Theory and Techniques. 42, 12, p. 2525-2530 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  24. Published

    Design of highly formable and strong titanium alloys through plasticity induced transformation

    Neelakantan, S., Rivera-Díaz-del-Castillo, P. E. J. & Van Der Zwaag, S., 2008, TMS2008 - 137th Annual Meeting and Exhibition Supplemental Proceedings: Materials Processing and Properties. Vol. 1. p. 357-362 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  25. Published

    Design of helix TWTs for optimum linearity

    Jenkins, R. O. & Carter, R. G., 1/01/2002, 7th IEEE High Frequency Postgraduate Student Colloquium, HFPSC 2002. Institute of Electrical and Electronics Engineers Inc., 7 p. 1088422. (IEEE High Frequency Postgraduate Student Colloquium; vol. 2002-January).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  26. Published

    Design of helix slow-wave structures for high efficiency TWTs.

    Srivastava, V., Carter, R. G., Ravinder, B., Sinha, A. K. & Joshi, S. N., 12/2000, In: IEEE Transactions on Electron Devices. 47, 12, p. 2438-2443 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  27. Published

    Design of helix slow-wave structure for a high efficiency space TWT

    Srivastava, V., Ravinder, B., Sinha, A. K., Joshi, S. N. & Carter, R. G., 1/12/1998, In: ITG-Fachbericht. 150, p. 349-351 3 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  28. Published

    Design of helix applicators for microwave heating.

    Carter, R. G. & Wang, P., 1997, In: Journal of Microwave Power and Electromagnetic Energy. 32, 4, p. 199-204 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  29. Published

    Design of discrete-time RIDE control system.

    Ding, L., Bradshaw, A. & Taylor, C. J., 2006, Proceedings of the UKACC International Conference on Control.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  30. Published

    Design of D-band Double Corrugated Waveguide TWT for Wireless Communications

    Basu, R., Billa, L., Mahadev Rao, J., Letizia, R. & Paoloni, C., 28/04/2019, 2019 International Vacuum Electronics Conference (IVEC). IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  31. Published

    Design of compact air-vias-perforated SIW horn antenna with partially detached broad walls

    Cai, Y., Zhang, Y., Qian, Z., Cao, W. & Wang, L., 30/06/2016, In: IEEE Transactions on Antennas and Propagation. 64, 6, p. 2100-2107 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  32. Published

    Design of autopilots for high performance missiles.

    Bradshaw, A. & Counsell, J. M., 1992, In: Journal of Systems and Control. 206, p. 75-84 10 p.

    Research output: Contribution to Journal/MagazineJournal article

  33. Published

    Design of an integrated process for biodiesel production using supercritical methanolysis: Simultaneous work and energy integration

    Aboelazayem, O., Gadalla, M., Alhajri, I. & Saha, B., 18/11/2019, Design of an integrated process for biodiesel production using supercritical methanolysis: Simultaneous work and energy integration.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  34. Published

    Design of a terahertz cascade backward wave amplifier

    David, J.-F., Durand, A., Mineo, M. & Paoloni, C., 06/2014, In: IEEE Transactions on Electron Devices. 61, 6, p. 1715-1720 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  35. Published

    Design of a robust LQG controller based on subspace identified models for vibration supression of a flexible plate

    Ahmadizadeh, S., Poshtan, J. & Montazeri, A., 04/2011, p. 842-845. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  36. Published

    Design of a Reflectarray Fed by a Planar Leaky-Wave Antenna for 3U CubeSats

    Rodriguez Prado, D., Poveda-Garcia, M., Goussetis, G. & Wang, L., 4/11/2024, 2024 17th United Conference on Millemetre Waves and Terahertz Technologies (UCMMT). IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  37. Published

    Design of a reduced-order nonlinear observer for vehicle velocities estimation

    Guo, H., Chen, H., Cao, D. & Jin, W., 2013, In: IET Control Theory and Applications. 7, 17, p. 2056–2068 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  38. Published

    Design of a reconfigurable platform for navigation signal simulation

    Ming, D., Zhong, X., Ma, X. & Liu, L., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  39. Published

    Design of a reconfigurable platform for navigation signal simulation

    Ming, D., Zhong, X., Liu, L. & Ma, X., 2013, In: Journal of Networks. 8, 5, p. 1019-1026 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  40. Published

    Design of a radio frequency heated isothermal micro-trickle bed reactor

    Aiouache, F., 1/05/2014, In: Chemical Engineering Journal. 243, p. 225-233 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  41. Published

    Design of a neutrino source based on beta beams

    Burt, G., Dexter, A. & Wildner, E., 23/07/2014, In: Physical Review Special Topics: Accelerators and Beams. 17, 51 p., 071002 .

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  42. Published

    Design of a MIMO neuro-controller for ANC system with loudspeaker nonlinearity in enclosure

    Montazeri, A. & Poshtan, J., 2007, Signal Processing and Communications, 2007. ICSPC 2007. IEEE International Conference on. New York: IEEE, p. 1415-1418 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  43. Published

    Design of a matrix amplifier using FET-gate-width tapering

    DAGOSTINO, S. & PAOLONI, C., 5/02/1995, In: Microwave and Optical Technology Letters. 8, 2, p. 118-121 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  44. Forthcoming

    Design of a High-Gain Single-Feed Quad-Beam Metalens with Polarization Conversion at 0.1 THz

    Liu, X., Rodriguez Prado, D., Paoloni, C., Letizia, R., Zhang, L., Sanz-Izquierdo, B., Gao, S. & Wang, L., 12/12/2024, (Accepted/In press).

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  45. Published

    Design of a high-gain silicon BJT and an E- pHEMT hybrid matrix amplifier with an optimum filter-matching technique

    Sangaran, P., Narendra, K. & Paoloni, C., 2/10/2019, In: IET Microwaves, Antennas and Propagation. 13, 12, p. 2153 – 2158 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  46. Published

    Design of a Fuel Explosion-Based Chameleon-Like Soft Robot Aided by the Comprehensive Dynamic Model

    Zhou, H., Cao, S., Zhang, S., Li, F. & Ma, N., 14/03/2023, In: Cyborg and Bionic Systems. 4, 14 p., 10.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  47. Published

    Design of a Dielectric-lined Waveguide for Terahertz-driven Linear Electron Acceleration

    Healy, A., Burt, G. C., Jamison, S., Graham, D. & Cliffe, M., 05/2017, Proceedings of the 28th Linear Accelerator Conference: LINAC2016. Yamazaki, Y., Facco, A., McCausey, A. & Schaa, V. R. W. (eds.). JACoW, p. 158-160 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  48. Published

    Design of a Detector for Characterizing Neutron Fields for Single-Event Effects Testing

    Cai, X. X., Platt, S. & Monk, S. D., 06/2011, In: IEEE Transactions on Nuclear Science. 58, 3 Part 2, p. 1123-1128 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  49. Published

    Design of a controller for a high-performance fighter aircraft using robust inverse dynamics estimation.

    Muir, E. H. M. & Bradshaw, A., 1994, Proceedings of an IMechE conference: Aerotech'94. Birmingham

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  50. Published

    Design of a controller for a highly coupled VSTOL aircraft.

    Bennett, D., Burge, S. E. & Bradshaw, A., 1999, In: Transactions of the Institute of Measurement and Control. 21, 2-3, p. 63-75 13 p.

    Research output: Contribution to Journal/MagazineJournal article

  51. Published

    Design of a compact photonic crystal sensor

    Derbali, J., AbdelMalek, F., Obayya, S. S. A., Bouchriha, H. & Letizia, R., 07/2011, In: Optical and Quantum Electronics. 42, 8, p. 463-472 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  52. Published

    Design of a coaxial window for high power CW magnetron

    Jie, W. & Carter, R. G., 1/01/1998, ICMMT 1998 - 1998 International Conference on Microwave and Millimeter Wave Technology, Proceedings. Liao, F.-J. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 744-747 4 p. 768396. (ICMMT 1998 - 1998 International Conference on Microwave and Millimeter Wave Technology, Proceedings; vol. 1998-August).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  53. Published

    Design of a chattering-free sliding mode control system for robust position control of a quadrotor

    Can, A., Efstathiades, H. & Montazeri, A., 28/12/2020, Proceedings of the 2020 International Conference of Nonlinearity, Information and Robotics (NIR). IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  54. Published

    Design of 71-76 GHz Double-Corrugated Waveguide Traveling-Wave Tube for Satellite Downlink

    Li, X., Huang, X., Mathisen, S., Letizia, R. & Paoloni, C., 06/2018, In: IEEE Transactions on Electron Devices. 65, 6, p. 2195-2200 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  55. Published

    Design Method of Immiscible Dissimilar Welding (Mg/Fe) Based on CALPHAD and Thermodynamic Modelling

    Zang, C., Zhao, X., Xia, H., Wen, W., Tan, Z., Tan, C. & Rivera-Díaz-del-Castillo, P. E. J., 14/06/2024, In: Materials and Design. 243, 113050.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  56. Published

    Design method for Double Corrugation Rectangular Waveguide THz vacuum amplifiers

    Mineo, M., Paoloni, C., Bariou, D., David, J.-F. & Durand, A. J., 1/05/2010, Vacuum Electronics Conference (IVEC), 2010 IEEE International. IEEE, p. 325 -326 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  57. Published

    Design for testability strategies for mixed signal and analogue designs: from layout to system.

    Richardson, A. M. D., Lechner, A. & Olbrich, T., 1998, Proceedings of the 5th IEEE international conference on electronics, circuits and systems. Lisbon, p. 425-433 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  58. Published

    Design for testability strategies for a high performance gain control circuit.

    Lechner, A., Richardson, A. M. D., Hermes, B. & Perkins, A., 1998, Proceedings of the international IEEE mixed signal test workshop. The Hague

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  59. Published

    Design for Micro and Nano Manufacture; The "PATENT-DfMM Network of Excellence: Modelling and Simulation Cluster

    Richardson, A., Slattery, O. & Rencz, M., 1/04/2006, Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems, 2006. EuroSime 2006. 7th International Conference on. p. 1 -5 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  60. Published

    Design for Manufacture using Functional Analysis and CAD Mould Simulation for Rapid Prototyping and Rapid Tooling: Paper: ESDA2012-82410

    Lupeanu, M., Brooks, H., Rennie, A., Celik, K., Neagu, C. & Akinci, I., 07/2012, ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2012): Proceedings of the . Nantes: American Society of Mechanical Engineers (ASME), 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  61. Published

    Design considerations on complementary split ring resonator-loaded waveguides for Wakefield generation

    Sharples, E. & Letizia, R., 12/2016, In: IEEE Transactions on Plasma Science. 44, 12, p. 3281-3287 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  62. Published

    Design considerations of microcavity ring resonators

    Abujnah, N., Letizia, R. & Obayya, S. S. A., 08/2011, In: IET Optoelectronics. 5, 4, p. 158-164 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  63. Published

    Design Considerations for On-line Testing of a Capacitive Accelerometer.

    Jeffery, C., Bunyan, R. J. T., Combes, D., King, D. O. & Richardson, A. M. D., 2005, Proceedings of the 11th IEEE International Mixed-Signals Testing Workshop. p. 220-223 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  64. Published

    Design approach for the development of a cryomodule for compact crab cavities for Hi-Lumi LHC

    Pattalwar, S., Jones, T., Templeton, N., Goudket, P., McIntosh, P. A., Wheelhouse, A., Burt, G. C., Hall, B., Wright, L. & Peterson, T., 29/01/2014, In: AIP Conference Proceedings. 1573, 1, p. 795-802 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  65. Published

    Design and vertical tests of double-quarter wave cavity prototypes for the high-luminosity LHC crab cavity system

    Verdú-Andrés, S., Burt, G. C. & Shipman, N., 13/08/2018, In: Physical Review Accelerators and Beams. 21, 8, 14 p., 082002.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  66. Published

    Design and testing of a novel neutron survey meter

    Balmer, M., 2016, Lancaster University. 211 p.

    Research output: ThesisDoctoral Thesis

  67. Published

    Design and testing of a four rod crab cavity for High Luminosity LHC

    Hall, B., Burt, G. C., Apsimon, R. J., Lingwood, C., Tutte, A., Grudiev, A., Macpherson, A., Navarro-Tapia, M., Calaga, R., Hernández-Chahín, K., Appleby, R. & Goudket, P., 3/01/2017, In: Physical Review Special Topics: Accelerators and Beams. 20, 1, 17 p., 012001.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  68. Published

    Design and Test of an Oscillation-based System Architecture for DNA Sensor Arrays

    Liu, H., Kerkhoff, H. G., Richardson, A., Zhang, X., Nouet, P. & Azais, F., 1/06/2005, Proceedings of 11th International Mixed Signal Test Workshop, Cannes, France. France: TIMA Laboratory, p. 1-6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  69. Published

    Design and structural optimisation of a tractor mounted telescopic boom crane

    Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 39, 3, p. 909-924

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  70. Published

    Design and simulation studies of the novel beam arrival monitor pickup at Daresbury Laboratory

    Kalinin, A., Thakker, T., Jamison, S., Burt, G. C., Apsimon, R. J. & Dexter, A. C., 06/2016, Proceedings of IPAC2016, Busan, Korea. Petit-Jean-Genaz, C., Kim, D. E., Kim, K. S., Ko, I. S., Kim, K. R. & Schaa, V. R. W. (eds.). Geneva: JACoW, p. 334-336 3 p. MOPMR038

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  71. Published

    Design and simulation of an integrated process for biodiesel production from waste cooking oil using supercritical methanolysis

    Aboelazayem, O., Gadalla, M. & Saha, B., 15/10/2018, In: Energy. 161, p. 299-307 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  72. Published

    Design and simulation of a multi-function MEMS sensor for health and usage monitoring.

    Xu, Z., Kotsov, D., Richardson, A., Li, L. & Begbie, M., 12/01/2010, In: Proceedings of IEEE Prognostics & System Health Management Conference. p. 1-7 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  73. Published

    Design and self-test for switched-current building blocks

    Olbrich, T. & Richardson, A., 1996, In: IEEE Design and Test of Computers. 13, 2, p. 10-17 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  74. Published

    Design and reliability-based optimization of the piezoelectric flex transducer

    Luo, L., 2018, Lancaster University. 209 p.

    Research output: ThesisDoctoral Thesis

  75. Published

    Design and realization aspects of 1-THz cascade backward wave amplifier based on double corrugated waveguide

    Paoloni, C., Di Carlo, A., Bouamrane, F., Bouvet, T., Durand, A. J., Kotiranta, M., Krozer, V., Megtert, S., Mineo, M. & Zhurbenko, V., 2013, In: IEEE Transactions on Electron Devices. 60, 3, p. 1236-1243 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  76. Published

    Design and performance of an adaptive MFSK HF terminal.

    Clark, P. D. J., Horley, N., Darnell, M., Honary, B. & Maundrell, M., 07/1994, HF Radio Systems and Techniques, 1994., Sixth International Conference on. IEEE, p. 330-332 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  77. Published

    Design and Performance Evaluation of a Resistive Control Using a Hydraulic PTO System for the TALOS Wave Energy Converter

    Leon-Quiroga, J. A., Ogden, D., Husain, S., Sheng, W., Aggidis, G. & Bharath, A., 17/06/2024, Proceedings of the Thirty-fourth (2024) International Ocean and Polar Engineering Conference. p. 649-655 7 p. 195-2024-TPC-0888

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  78. Published

    Design and Optimisation of a Three Layers Thermal Neutron, Fast Neutron and Gamma-Ray Imaging System

    Al Hamrashdi, H., Cheneler, D. & Monk, S., 20/01/2020, EPJ Web of Conferences: ANIMMA 2019 – Advancements in Nuclear Instrumentation Measurement Methods and their Applications. EPJ Web of Conferences, Vol. 225. 7 p. 07002

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  79. Published

    Design and operation of a compact 1 MeV X-band Linac

    Burt, G., Ambattu, P., Lingwood, C., Abram, T., Burrows, I., Corlett, P., Goulden, A., Hartnett, T., Hindley, P., McIntosh, P. A., Middleman, K., Saveliev, Y., Smith, R. & White, C., 2012, Proceedings of LINAC2012, Tel-Aviv, Israel. p. 183-185 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  80. Published

    Design and modeling of a single-mass biaxial capacitive accelerometer based on the SUMMiT v process

    Serrano-Vázquez, F. X., Herrera-May, A. L. & Bandala-Sánchez, M., 31/12/2013, In: Microsystem Technologies. 19, 12, p. 1997-2009 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  81. Published

    Design and Microfabrication of a Double Corrugated Waveguide for G-band TWTs

    Basu, R., Billa, L., Rao, J. M., Himes, L., Zheng, Y., Renninson, N., Rodgers, B., Letizia, R., Luhmann, N. C., Gamzina, D. & Paoloni, C., 19/10/2020, 2020 IEEE 21st International Conference on Vacuum Electronics (IVEC).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  82. Published

    Design and implementation of a proportional-integral-plus (PIP) control system for temperature, humidity and carbon dioxide in a glasshouse.

    Lees, M. J., Taylor, J., Chotai, A., Young, P. C., Chalabi, Z. S. & Tych, W., 1996, In: Acta Horticulturae (ISHS). 406, p. 115-124 10 p.

    Research output: Contribution to Journal/MagazineJournal article

  83. Published

    Design and implementation of a planar helix for traveling wave tubes based on package compatible ball grid array technology

    Babaeihaselghobi, A., Nadeem Akram, M., Badri Ghavifekr, H., Billa, L. R., Bardalen, E. & Ohlckers, P. A., 1/05/2020, In: Microsystem Technologies. 26, p. 1681–1687 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  84. Unpublished

    Design and fabrication of novel, geometrically optimised conical inline filters/strainers for use in the process industries.

    Vijayakumar, B., 7/10/2020, (Unpublished) Lancaster University. 308 p.

    Research output: ThesisDoctoral Thesis

  85. Published

    Design and Fabrication of E-band Traveling Wave Tube for High Data Rate Wireless Links

    Paoloni, C., Basu, R., Narasimhan, P., Gates, J. & Letizia, R., 1/06/2023, In: IEEE Transactions on Electron Devices. 70, 6, p. 2773-2779 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  86. Published

    Design and fabrication of double corrugated waveguide for a Ka-band traveling wave tube

    Paoloni, C., Mineo, M., Busnell, L., Beardsley, M., Henry, M. & Huggard, P. G., 19/04/2016, Proceedings of the 17th IEEE International Vacuum Electronics Conference (IVEC 2016). IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  87. Published

    Design and fabrication of cranioplasty prostheses: fit evaluation between phantom-based haptic environment and Materialise 3-Matic Software

    Hasib, H., Yahaya, S. H., Mohamad, A. K., Bani Hashim, A. Y., Ali Mokhtar, N. & Simha, S. S., 2013, In: Journal of Advanced Manufacturing Technology. 7, 1, p. 87-96 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  88. Published

    Design and fabrication of an E-band TWT for high throughout satellite links

    Paoloni, C., Basu, R., Da Costa, V., Gates, J., Narasimhan, P. & Letizia, R., 8/05/2023, RF Space Week. The Netherland

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  89. Published

    Design and fabrication of a sheet beam BWO at 346 GHz

    Popovic, B., Himes, L., Gamzina, D., Luhmann Jr., N. C., Paoloni, C., Letizia, R., Mineo, M., Malek Abadi, A., Yue, L., Tang, X., Feng, J., Tang, Y., Gao, M. & Zhang, F., 04/2015, Vacuum Electronics Conference (IVEC), 2015 IEEE International . IEEE, p. 1-2 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  90. Published

    Design and fabrication of a D-band traveling wave tube for millimeter wave communications

    Basu, R., Billa, L., Mahadev Rao, J., Letizia, R. & Paoloni, C., 21/10/2019, 2019 44th International Conference on Infrared Millimeter and Terahertz Waves. IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  91. Published
    No renderer
  92. Published

    Design and Fabrication Aspects of an E-band Double Corrugated Waveguide Traveling Wave Tube

    Paoloni, C., Basu, R., Da Costa, V., Gates, J., Narasimhan, P. & Letizia, R., 25/04/2023, 2023 24th International Vacuum Electronics Conference (IVEC).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  93. Published

    Design and development of thyroxine/heparin releasing affordable cotton dressings to treat chronic wounds

    Waris, T. S., Shah, S. T. A., Mehmood, A., Iqbal, Z., Zehra, M., Chaudhry, A. A., Rehman, I. U. & Yar, M., 31/05/2022, In: Journal of Tissue Engineering and Regenerative Medicine. 16, 5, p. 460-471 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  94. Published

    Design and development of a real-time readout electronics system to retrieve data from a square multi-anode photomultiplier tube for neutron gamma pulse shape discrimination

    Cieslak, M. & Akurugoda Gamage, K. A., 15/08/2016, Proceedings of the 20th IEEE-NPSS Real Time Conference 2016. IEEE, 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  95. Published

    Design and development of a novel multistation MTP joint simulator for in vitro testing

    Green, S., Lee, S., Joyce, T. & Unsworth, A., 2006, p. P137.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  96. Published

    Design and Development of a Novel Controller for Robust Attitude Control of an Unmanned Air Vehicle for Nuclear Environments

    Nemati, H. & Montazeri, A., 1/11/2018, 2018 UKACC 12th International Conference on Control (CONTROL). IEEE, p. 373-378 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  97. Published

    Design and Development of a Mobile Sensor Network for the Nuclear Industry

    Can, A. & Montazeri, A., 9/11/2019.

    Research output: Contribution to conference - Without ISBN/ISSN Posterpeer-review

  98. Published

    Design and Development of a Mobile Sensor Network for the Nuclear Industry: won first prize for best Graduate Student Poster

    Can, A., Price, J. & Montazeri, A., 6/03/2022.

    Research output: Contribution to conference - Without ISBN/ISSN Posterpeer-review

  99. Published

    Design and development of a low-cost AM system to help increase accessibility for people with sight loss

    Lister, N., Jablonska, K., Abram, T., Lambert, C., Frontani, I. & Dalton, C., 20/10/2023, Proceedings Book ICD3DP 2023 : The 2nd International Conference on Design for 3D Printing.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  100. Published

    Design and degradation modelling through artificial neural networks

    Lin, H., Kong, L. X. & Hsu, H.-Y., 2007, In: International Journal of Manufacturing Research. 2, 1, p. 97-113 17 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

Back to top