Home > Research > School of Engineering > Publications & Outputs

Research

View graph of relations

School of Engineering

4401 - 4500 out of 6,167Page size: 100
RSS feed of this list
Sort by: Type
  1. Conference paper
  2. Published

    Experimental investigation and analysis of the spear valve design on the performance of Pelton turbines: 3 case studies

    Zidonis, A., Benzon, S., Panagiotopoulos, A., Petley, S., Aggidis, G. A., Anagnostopoulos, I. & Papantonis, D., 11/10/2017.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  3. Published

    Lagrangian Large Signal Model for Double Corrugated Waveguides

    Waring, R. & Paoloni, C., 25/09/2017.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  4. Published

    Effects of Lap Thickness and Joint Geometry on Failure of Pultruded Composite Single-Lap Bolted Tension Joints

    Turvey, G. J. & Assassa, J., 5/09/2017, p. 23-28. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  5. Published

    Fuzzy Logic Based Ventilation for Controlling Harmful Gases in Livestock Houses

    Caglayan, N., Celik, H. K. & Rennie, A. E. W., 09/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  6. Published

    Backward wave oscillator for high power generation at THz frequencies

    Gamzina, D., Li, X., Tang, Y., Huang, X., Zheng, Y., Himes, L., Gonzalez, M., Li, H., Pan, P., Letizia, R., Feng, J., Luhmann Jr., N. C. & Paoloni, C., 6/08/2017.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  7. Published

    Point to Multipoint at Millimetre Waves Above 90 GHz

    Paoloni, C., 12/06/2017.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  8. Published

    Comparison of Galvanometer and Polygon Scanning Systems on Component Production Rates in Selective Laser Sintering

    King, B., Rennie, A. E. W. & Bennett, G. R., 27/04/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  9. Published

    Time-Dependant Human Mastication Simulation of Agricultural Products and Its Rapid Prototyping Aided Evaluation: A Case Study for Pecan Kernel Mastication

    Celik, H. K., Rennie, A. E. W., Er, K., Abram, T. N. & Akinci, I., 27/04/2017. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  10. Published

    Utilising Multi-Material PolyJet Additive Manufacturing for the Design and Fabrication of Prototype Flood Protection Door Seals

    Walsh, S. M. R., Rennie, A. E. W., Abram, T. N., Snape, M. & Roberts, L., 27/04/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  11. Published

    Designing Digital Materials with Volumetric Gradients

    Richards, D. C., Abram, T. N. & Rennie, A. E. W., 27/04/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  12. Published

    Folded wave guide TWT for 92 – 95 GHz band outdoor wireless frontend

    Paoloni, C., Andre, F., Krozer, V., Zimmerman, R., Quang, T. L., Letizia, R., Kohler, S., Sabaawi, A. & Ulisse, G., 3/04/2017.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  13. Published

    Experimental analysis of the onset and development of cavitation in a centrifugal pump

    Mousmoulis, G., Karlsen-Davies, N., Aggidis, G. A., Anagnostopoulos, I. & Papantonis, D., 02/2017. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  14. Published

    Use of psychoacoustics models as non-destructive means for active noise control systems

    Karimian, N., Karimian, S. & Montazeri, A., 1/01/2017.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  15. Published

    Investigation into the sound field reproduction systems: Compensation factors and performance improvement techniques

    Karimian, N., Montazeri, A. & Karimian, S., 1/01/2017.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  16. Published

    Team-based Learning: A Novel Approach to Teaching Engineering Subjects

    Najdanovic, V., 2017.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  17. Published

    Surface Finishing of Metal AM Parts

    Burns, N., Molyneux, A. & Geekie, L., 29/11/2016. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  18. Published

    Greener and Sustainable Alkene Epoxidation Process

    Saha, B., Mohammed, ML. & Mbeleck, R., 8/11/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  19. Published

    Computational analysis of the effects of manufacturing tolerances on the performance of a regenerative liquid ring (RLR) pump

    Karlsen-Davies, N. & Aggidis, G. A., 3/10/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  20. Published

    Evaluation of a rapid manufacturing approach for rectangular waveguide filters up to 1.1 THz

    Doychinov, V., David Paul, S. & Paoloni, C., 25/09/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  21. Published

    Double corrugated waveguide 0.346 THz BWO with wide beam channel

    Paoloni, C., Gamzina, D., Popovic, B., Himes, L., Barchfeld, R., Letizia, R., Tang, Y., Li, H., Waring, R., Zhang, J., Pan, P., Feng, J. & Luhmann Jr., N. C., 25/09/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  22. Published

    A traveling wave tube for 92 - 95 GHz band wireless applications

    Paoloni, C., Andre, F., Kohler, S., Krozer, V., Quang, T. L., Letizia, R., Sabaawi, A., Ulisse, G. & Zimmerman, R., 25/09/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  23. Published

    MAGIC-2D simulations of high efficiency hollow beam klystrons

    Constable, DA., Burt, G. C. & Lingwood, C. J., 18/07/2016. 2 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  24. Published

    Numerical simulation of high efficiency cylindrical beam klystrons

    Constable, D. A., Burt, G. C. & Lingwood, C. J., 18/07/2016. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  25. Published

    A genetic algorithm approach for parameter optimization of a 7DOF robotic manipulator

    West, C., Montazeri, A., Monk, S. D. & Taylor, C. J., 28/06/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  26. Published

    Laser polishing - Enhancing surface quality of additively manufactured cobalt chrome and titanium components

    Gora, W. S., Tian, Y., Cabo, A. P., Ardron, M., Maier, R. R. J., Prangnell, P., Weston, N. J. & Hand, D. P., 30/05/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  27. Published

    University-private sector partnerships: assessing long-term collaboration to deliver economic impact in the Northwest of England

    Lambert, C. G., Dobson, S. & Hacking, M., 19/05/2016. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  28. Published

    Study of the dispersion of the double-corrugated waveguide at THz frequencies

    Hu, Y., Zhu, X. & Paoloni, C., 19/04/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  29. Published

    Fast Terahertz imaging using a quantum cascade amplifier up to 20,000 pps

    Ren, Y., Wallis, R., Jessop, D. S., Degl'innocenti, R., Klimont, A., Beere, H. E. & Ritchie, D. A., 12/04/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  30. Published

    Experimental investigation of recycled carpet composites for barrier structures

    Sotayo, A., Green, S. M. & Turvey, G. J., 04/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  31. Published

    Millimeter wave wireless system based on point to multi-point transmissions

    Paoloni, C., Andre, F., Rocchi, M., Marilier, M., Letizia, R., Zimmerman, R., Krozer, V., Ramirez, A. & Vilar, R., 2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  32. Published

    W-band point to multipoint system for small cells backhaul

    Paoloni, C., Magne, F., Andre, F., Krozer, V., Marilier, M., Ramirez, A., Vilar, R. & Zimmerman, R., 2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  33. Published

    Realising real-time capabilities of an embedded control system for fast-neutron scintillation detectors

    Aspinall, M. D., Joyce, M. J., Tomanin, A., Lavietes, A., Cave, F., Plentada, R. & Astromskas, V., 2016. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  34. Published

    Coupling self-assembling materials with digital designs to grow adaptive structures

    Blaney, A., Alexander, J., Dunn, N., Richards, D., Doursat, R., Rennie, A. & Anwar, J., 2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  35. Published

    Simulation of flow characteristics for filters designed with a non-stochastic lattice structure fabricated via additive manufacturing

    Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015, p. 153-158. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  36. Published

    Multi-material additive manufacture of multi-layer ceramic capacitors

    King, B. A. T., Rowan, B., Williams, C., Williams, L., Tubby, D., Rennie, A. E. W. & Dennison, K., 12/2015, p. 79-85. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  37. Published

    Pressure drop and velocity simulations in non-stochastic lattice structure for filter applications fabricated using additive manufacturing

    Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  38. Published

    Numerical design of high efficiency klystrons using core oscillation bunching

    Constable, D., Lingwood, C. J. & Burt, G. C., 18/11/2015. 2 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  39. Published

    Understanding Fluid-Structure Interaction for high amplitude wave loadings on a deep-draft paired column semi-submersible platform: a finite element approach

    Odijie, C. & Ye, J., 9/11/2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  40. Published

    Counting neutrons from the spontaneous fission of 238-U using scintillation detectors and mixed field analysers

    Parker, H., Joyce, M. & Jones, A. R., 22/05/2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  41. Published

    Hexagonal uniformly redundant arrays (HURAs) for scintillator based coded aperture neutron imaging

    Gamage, K., Zhou, Q. & Hayes, S., 04/2015, p. 1-4. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  42. Published

    Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artefacts

    Kaufman, J., Rennie, A. & Clement, M., 03/2015. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  43. Published

    Designing advanced filtration media through metal additive manufacturing

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 02/2015. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  44. Published

    THz BWO based on photonic crystal corrugated waveguide

    Letizia, R., Mineo, M. & Paoloni, C., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  45. Published

    Scenarios and use cases in Tweether: W-band for Internet Everywhere

    Paoloni, C., Letizia, R., Ni, Q., Krozer, V., Andre, F., Magne, F., Marilier, M., Zimmerman, R., Ramirez, A., Vilar, R. & Burciu, I., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  46. Published

    Investigation of pharmaceutical film coating process with terahertz sensing, optical coherence tomography and numerical modelling

    Lin, H., Dong, Y., Pei, C., Elliot, J. A., Shen, Y. & Zeitler, J. A., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  47. Published

    Adaptive Materials: Utilising additive manufactured scaffolds to control self-organising material aggregation

    Blaney, A., Alexander, J., Dunn, N., Richards, D., Rennie, A. & Anwar, J., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  48. Published

    The mid-infrared swept laser: Life beyond OCT?

    Childs, D. T. D., Hogg, R. A., Revin, D. G., Rehman, I. U., Cockburn, J. W., Matcher, S. J., V.V., T. (ed.), J.G., F. (ed.) & J.A., I. (ed.), 2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  49. Published

    Compact backward wave oscillators for THz imaging systems

    Paoloni, C., Yue, L., Tang, X., Zhang, F., Popovic, B., Himes, L., Barchfeld, R., Gamzina, D., Letizia, R., Mineo, M. & Luhmann Jr., N. C., 12/2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  50. Published

    Innovations in filtration through additive manufacturing: Paper: EP140165

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 09/2014. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  51. Published

    Fast design method for THz backward wave amplifiers

    Paoloni, C., David, J-F., Durand, A. & Mineo, M., 09/2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  52. Published

    Improved filtration using additive manufacturing

    Burns, N., Geekie, L., Travis, D., Burns, M., Weston, D. P. & Rennie, A., 07/2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  53. Published

    CASCADE: a cavity based dark matter experiment

    Kalliokoski, M., Bailey, I., Woollett, N., Burt, G., Dexter, A., Chattopadhyay, S., Goudket, P., Moss, A., Pattalwar, S., Thakker, T., Williams, P. & Dainton, J., 02/2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  54. Published

    High power THz vacuum electron devices for space applications

    Paoloni, C., Yue, L., Tang, X., Zhang, F., Popovic, B., Himes, L., Barchfeld, R., Gamzina, D., Letizia, R., Mineo, M. & Luhmann Jr., N. C., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  55. Published

    THz Cherenkov radiation from electron beam excitation of surface plasmon polaritons

    Letizia, R. & Stoja, E., 2014. 2 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  56. Published

    InSb grating for Smith-Purcell THz radiation

    Sharples, E. & Letizia, R., 2014. 2 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  57. Published

    Digital fast neutron radiography of rebar in concrete

    Mitton, K., Jones, A. R. & Joyce, M., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  58. Published

    An investigation on the performance of adaptive IIR filters for active noise control in one-dimensional systems (invited paper)

    Montazeri, A. & Behrouzfar, J., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  59. Published

    346 GHz source for plasma diagnostic applications

    Barchfeld, R., Popovic, B., Tang, X., Yue, L., Zhang, F., Mineo, M., Letizia, R., Paoloni, C., Domier, C. W. & Luhmann Jr., N. C., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  60. Published

    346 GHz BWO for fusion plasma diagnostics

    Popovic, B., Barchfeld, R., Tang, X., Zhang, F., Yue, L., Mineo, M., Letizia, R., Paoloni, C., Domier, C. W. & Luhmann Jr., N. C., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  61. Published

    Performance of time-critical smart grid applications in narrow band power line communication

    Tsado, Y., Lund, D. & Gamage, K., 2014, p. 407.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  62. Published

    Single- and double-lap bolted joints in pultruded composite plate

    Turvey, G., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  63. Published

    Hybrid power-train for port crane energy recovery

    Zhao, N., Schofield, N., Niu, W., Suntharalingam, P. & Zhang, Y., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  64. Published

    Introducing functionality to filter media

    Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 6/11/2013. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  65. Published

    Using additive manufacturing to build energy efficient filter supports

    Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 10/2013. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  66. Published

    Defining ‘critical speed’ in driver-vehicle systems

    West, C. & Cao, D., 10/2013, p. 4155-4160. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  67. Published

    Modeling driver steering control based on stochastic model predictive control

    Qu, T., Chen, H., Ji, Y., Guo, H. & Cao, D., 10/2013, p. 3704-3709. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  68. Published

    Real-time measurements of production uranium fuel assemblies using a liquid scintillator-based active interrogation neutron detection system

    Lavietes, A., Joyce, M., Plentada, R., Mascarenhas, M., Cronholm, M., Aspinall, M., Cave, F., Tomanin, A. & Peerani, P., 10/2013, p. #N39-2.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  69. Published

    The economics of multi-axis wave energy converters

    Richardson, D. & Aggidis, G., 9/06/2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  70. Published

    Vacuum tubes for Terahertz power generation

    Mineo, M. & Paoloni, C., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  71. Published

    Bioinspired adaptive control for artificial muscles

    Wilson, E. D., Assaf, T., Pearson, M. J., Rossiter, J. M., Anderson, S. R. & Porrill, J., 2013, p. 311-322. 12 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  72. Published

    LIGA-based Slow Wave Structure for a THz Vacuum Amplifier

    Bouamrane, F., Di Carlo, A., Durand, A. J., Kotiranta, M., Krozer, V., Zhurbenko, V., Mineo, M. & Paoloni, C., 2013. 2 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  73. Published

    New plasmonic materials based split ring resonators for high frequency applications

    Sharples, E. & Letizia, R., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  74. Published

    Design of a reconfigurable platform for navigation signal simulation

    Ming, D., Zhong, X., Ma, X. & Liu, L., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  75. Published

    Location and identification of neutron sources using fast organic liquid scintillator detector

    Gamage, K., Joyce, M. & Taylor, G., 2013, p. 71.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  76. Published

    A Monte Carlo study of scintillator-based coded-aperture neutron imaging

    Hayes, S. & Gamage, K., 2013, p. 74.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  77. Published

    Critical review of directional neutron survey meters

    Balmer, M., Gamage, K. & Taylor, G., 2013, p. 197. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  78. Published

    Scintillator based coded-aperture imaging for neutron detection

    Hayes, S. & Gamage, K., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  79. Published

    A Monte Carlo model for neutron coincidence counting with fast organic liquid scintillation detectors

    Gamage, K., Joyce, M. & Cave, F., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  80. Published

    Estimation of the contribution of primary and secondary radiation to a pinhole volume from a water phantom

    Gamage, K., Taylor, G. & Joyce, M., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  81. Published

    Investigation of three-dimensional localisation of neutron sources using parallel axis imaging

    Gamage, K., Joyce, M. & Taylor, G., 10/2012, p. 600-605. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  82. Published

    Functional analysis for the development of bio-medical products

    Lupeanu, M., Neagu, C., Opran, C. & Rennie, A., 10/2012, p. 330-336. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  83. Published

    A method for the replacement of 137Cs with 40K for open-source ion exchange research applications in hot cells,

    Parker, A. J., Joyce, M. & Boxall, C., 27/09/2012.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  84. Published

    An experimental investigation of the tensile behaviour of single-lap bolted joints in pultruded GFRP plate

    Turvey, G. & Gode, J., 13/09/2012. 15 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  85. Published

    Optimal sensor selection for wind turbine condition monitoring using multivariate principal component analysis approach

    Wang, Y., Ma, X. & Joyce, M., 09/2012. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  86. Published

    Generic model of a community-based microgrid integrating wind turbines and photovoltaics

    Ma, X., Qin, J. & Wang, Y., 07/2012, p. 3147-3153. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  87. Published

    Failure of single-lap single-bolt tension joints in pultruded glass fibre reinforced plate

    Turvey, G., 13/06/2012. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  88. Published

    THz amplifier based on miniaturized vacuum tube FP7 OPTHER

    Paoloni, C. & Di Carlo, A., 05/2012. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  89. Published

    Double Negative Metamaterial Inclusions in Photonic Crystal Based Resonant Cavities

    Letizia, R. & Pinto, D., 2012. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  90. Published

    Low-level joint control of a robotic manipulator using state-dependent parameter models

    Robertson, D. & Taylor, C. J., 2012. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  91. Published

    State-dependent control of a hydraulically-actuated nuclear decommissioning robot

    Robertson, D. & Taylor, C. J., 2012. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  92. Published

    Multipactor simulations of the SPL power coupler

    Burt, G., Dexter, A. C., Ambattu, P. K., Calaga, R. & Montesinos, E., 1/12/2011, p. 878-880. 3 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  93. Published

    Preliminary investigation of a novel breakwater combining coastal defence and energy generation for near shore environments

    Hillmann, M., Quayle, S. & Li, M., 15/11/2011. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  94. Published

    Delivering Regional Eco-Innovation through Knowledge Exchange

    Lambert, C. & Rennie, A., 25/10/2011. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  95. Published

    Real-time, digital imaging of neutrons and gamma rays with a fast liquid scintillation detector

    Joyce, M. & Akurugoda Gamage, K., 5/10/2011. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  96. Published

    Numerical and experimental investigation of a novel breakwater combining coastal defence and energy generation for near shore environment

    Hillmann, M., Li, M. & Quayle, S., 7/09/2011. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  97. Published

    Pultruded GFRP continuus beams - comparison of flexural test data with analysis predictions

    Turvey, G., 6/09/2011, p. 470-481.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  98. Published

    Torque ripple and power in a variable pitch vertical axis tidal turbine

    Winchester, J. & Quayle, S., 5/09/2011. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  99. Published

    Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve

    Celik, H. K., Rennie, A., Karayel, D. & Akinci, I., 09/2011, p. 59. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  100. Published

    Online intelligent condition monitoring of electrical machines.

    Ma, X., 05/2011, p. 223-228. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  101. Published

    Design of a robust LQG controller based on subspace identified models for vibration supression of a flexible plate

    Ahmadizadeh, S., Poshtan, J. & Montazeri, A., 04/2011, p. 842-845. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

Previous 1...41 42 43 44 45 46 47 48 ...62 Next

Back to top