School of Engineering

View graph of relations

Faculty of Science and Technology

Show 14 centres, groups and clusters

Hide 14 centres, groups and clusters

4501 - 4600 out of 6,455Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Author last name

Published
Surface modification of bioceramics by grafting of tailored allyl phosphonic acid
Phillips, M. J., Duncanson, P., Wilson, K., Darr, J. A., Griffiths, D. V. & Rehman, I., 2005, In: Advances in Applied Ceramics. 104, 5, p. 261-267 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Synthesis and characterization of nano-biomaterials with potential osteological applications
Phillips, M. J., Darr, J. A., Luklinska, Z. B. & Rehman, I., 2003, In: Journal of Materials Science: Materials in Medicine. 14, 10, p. 875-882 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Optimisation strategies to reduce renewables curtailment using transportable energy storage systems
Phurailatpam, C., Hu, Y., Keyvani, B., Zhao, N. & Flynn, D., 6/03/2024, Renewable Power Generation and Future Power Systems Conference 2023 (RPG 2023 UK). 29 ed. IEEE, Vol. 2023. p. 75-80 6 p. (IET Conference Proceedings).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Dissolved organic carbon and biodegradable dissolved organic carbon determination in river water of the Strug Basin
Piech, A., Trzyna, K., Skwarczynska-Wojsa, A. L. & Douglas, T., 31/03/2019, In: JOURNAL OF CIVIL ENGINEERING, ENVIRONMENT AND ARCHITECTURE. 36, 1, p. 27-35 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Social Design Fiction. New Methods for the Design of Emerging Technology.
Pilling, M., Richards, D., Dunn, N. & Rennie, A., 31/05/2019, In: The Design Journal. 22, sup1, p. 1993-2005 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modelling the temperature effects of melt pool position and wall height in additive manufacturing by direct laser deposition
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 1st International Conference on Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J., Mitchell, G., Mateus, A., Batista, F., Vasco, J., Correia, M., Andre, N., Lima, P., Novo, P., Custodio, P. & Martinho, P. (eds.). Leiria: Escola Superior Tecnologia Gestao Leiria, p. 224-231 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Component repair using laser direct metal deposition
Pinkerton, A. J., Wang, W. & Li, L., 07/2008, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 222, 7, p. 827-836 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Theoretical analysis of the coincident wire-powder laser deposition process
Pinkerton, A. J., Syed, W. U. H. & Li, L., 12/2007, In: Journal of Manufacturing Science and Engineering. 129, 6, p. 1019-1027 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An analytical model of beam attenuation and powder heating during coaxial laser direct metal deposition
Pinkerton, A. J., 2007, In: Journal of Physics D: Applied Physics. 40, 23, p. 7323-7334 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Thermal and microstructural aspects of the laser direct metal deposition of waspaloy
Pinkerton, A. J., Karadge, M., Syed, W. U. H. & Li, L., 08/2006, In: Journal of Laser Applications. 18, 3, p. 216-226 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An experimental and theoretical investigation of combined gas- and water-atomized powder deposition with a diode laser
Pinkerton, A. J., Syed, W. U. H. & Li, L., 2006, In: Journal of Laser Applications. 18, 1, p. 73-80 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multiple-layer laser deposition of steel components using gas- and water-atomised powders: the differences and the mechanisms leading to them
Pinkerton, A. J. & Li, L., 15/07/2005, In: Applied Surface Science. 247, 1-4, p. 175-181 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Direct additive laser manufacturing using gas- and water-atomised H13 tool steel powders
Pinkerton, A. J. & Li, L., 2005, In: International Journal of Advanced Manufacturing Technology. 25, 5-6, p. 471-479 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An experimental and numerical study of the influence of diode laser beam shape on thin wall direct metal deposition
Pinkerton, A. J. & Li, L., 2005, In: Journal of Laser Applications. 17, 1, p. 47-56 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances
Pinkerton, A. J. & Li, L., 21/07/2004, In: Journal of Physics D: Applied Physics. 37, 14, p. 1885-1895 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The development of temperature fields and powder flow during laser direct metal deposition wall growth
Pinkerton, A. J. & Li, L., 05/2004, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 218, 5, p. 531-541 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An analytical model of energy distribution in laser direct metal deposition
Pinkerton, A. J. & Li, L., 2004, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 218, 4, p. 363-374 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multiple-layer cladding of stainless steel using a high-powered diode laser: an experimental investigation of the process characteristics and material properties
Pinkerton, A. J. & Li, L., 1/04/2004, In: Thin Solid Films. 453-454, 2, p. 471-476 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The behaviour of water- and gas-atomised tool steel powders in coaxial laser freeform fabrication
Pinkerton, A. J. & Li, L., 1/04/2004, In: Thin Solid Films. 453-454, 2, p. 600-605 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modelling powder concentration distribution from a coaxial deposition nozzle for laser-based rapid tooling
Pinkerton, A. J. & Li, L., 02/2004, In: Journal of Manufacturing Science and Engineering. 126, 1, p. 33-41 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The significance of deposition point standoff variations in multiple-layer coaxial laser cladding (coaxial cladding standoff effects)
Pinkerton, A. J. & Li, L., 05/2004, In: International Journal of Machine Tools and Manufacture. 44, 6, p. 573-584 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Process characteristics and effects of gas- and water-atomized stainless steel powders in laser-based rapid tooling
Pinkerton, A. J. & Li, L., 08/2003, In: Journal of Laser Applications. 15, 3, p. 172-178 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effects of powder geometry and composition in coaxial laser deposition of 316L steel for rapid prototyping
Pinkerton, A. J. & Li, L., 2003, In: CIRP Annals - Manufacturing Technology. 52, 1, p. 181-184 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid prototyping using direct laser deposition - the effect of powder atomization type and flowrate
Pinkerton, A. J. & Li, L., 2003, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 217, 6, p. 741-752 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An investigation of the effect of pulse frequency in laser multiple-layer cladding of stainless steel
Pinkerton, A. J. & Li, L., 2003, In: Applied Surface Science. 208-209, p. 405-410 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The effect of laser pulse width on multiple-layer 316L steel clad microstructure and surface finish
Pinkerton, A. J. & Li, L., 15/03/2003, In: Applied Surface Science. 208-209, p. 411-416 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Guest Editorial: The 36th MATADOR Conference 2010
Pinkerton, A. J., 2012, In: Materials and Manufacturing Processes. 27, 4, p. 363-363 1 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Laser and electron beams - evolving tools for surface engineering
Pinkerton, A. J., 04/2009, In: Surface Engineering. 25, 3, p. 177-179 3 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Laser rapid manufacturing process advancement through powder morphology
Pinkerton, A. J., 2002.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
A method and model for pulsed laser cleaning of rapid manufactured parts
Pinkerton, A. J. & Li, K., 2007, Proceedings of the 21st International Conference on Surface Modification Technologies. Sudarshan, T. S. & Jeandin, M. (eds.). ASM International
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Direct laser deposition layer profiles and the factors affecting them
Pinkerton, A. J. & Li, L., 2002.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
A verified model of the behaviour of the axial powder stream concentration from a coaxial laser cladding nozzle
Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparative study of multiple layer laser deposition using water and gas atomised 316L stainless steel powders
Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The effect of diode laser beam shape and traverse direction on the direct metal deposition process
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Direct metal deposition by diode laser: modelling the effect of increased beam coupling
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Diode laser deposition of microstructurally graded components using gas- and water-atomised powder blends
Pinkerton, A. J., Syed, W. U. H. & Li, L., 2004, Proceedings of the 23rd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The effect of process parameters on residual stresses within an inconel 718 part produced by the Direct Laser Deposition process
Pinkerton, A. J., Shackleton, J., Moat, R., Li, L., Withers, P., Preuss, M., Allen, J., Hilton, P. & Folwell, R., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 601-610 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Explaining microstructural and physical variations in rapid additive manufactured waspaloy parts through the laser-deposition thermal cycle
Pinkerton, A. J., Syed, W. U. H., Karadge, M. & Li, L., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 822-831 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Alternative nozzle and metal delivery methods for laser-assisted metal deposition: (invited paper & presentation)
Pinkerton, A. J., 2005.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Diode laser metal deposition: The effect of pulsed beam parameters on superalloy microstructure and deposit morphology
Pinkerton, A. J., Moat, R. J., Li, L., Preuss, M. & Withers, P., 2006, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An analytical model of the combined powder-wire deposition process
Pinkerton, A. J., Syed, W. U. H. & Li, L., 2006, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A verified model of laser direct metal deposition using an analytical enthalpy balance method
Pinkerton, A. J., Moat, R., Shah, K., Li, L., Preuss, M. & Withers, P. J., 2007, Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Three dimensional analytical and finite element methods for simulating a moving melt pool with mass addition
Pinkerton, A. J., Kamara, A. M., Shah, K., Safdar, S. & Li, L., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 369-374 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Direct laser deposited titanium with controlled porosity for bone tissue engineering
Pinkerton, A. J., Paul, C. P., Iravani-Tabrizipoor, M., Kukreja, L. M. & Khajepour, A., 2008, Proceedings of the 27th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 421-430 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Laser direct metal deposition: theory and applications in manufacturing and maintenance
Pinkerton, A. J., 2010, Advances in laser materials processing : technology, research and applications. Lawrence, J. (ed.). Oxford: Woodhead Publishing Limited
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Porous surface structures by continuous and pulsed laser metal deposition for biomedical applications
Pinkerton, A. J., Ahsan, M. N., Paul, C. P. & Kukreja, L. M., 2009, Proceedings of the 23rd International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Advances and challenges in the modelling of laser melt pool processes: Keynote presentation at the Interfinish SERIA 2013 Asia-Pacific International Conference on Surface Engineering for Research and Industrial Applications
Pinkerton, A., 2013
Research output: Other contribution
Published
Advances in the modelling of laser direct metal deposition (invited)
Pinkerton, A., 02/2015, In: Journal of Laser Applications. 27, S1, 7 p., S15001.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Lasers in additive manufacturing
Pinkerton, A. J., 04/2016, In: Optics and Laser Technology. 78, Part A, p. 25-32 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
FDTD analysis of nonlinear bragg grating based devices
Pinto, D., Obayya, S., Rahman, B. & Grattan, K., 12/2006, In: Optical and Quantum Electronics. 38, 15, p. 1217-1235 19 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Improved complex envelope alternative direction implicit finite difference time domain method for photonic bandgap cavities
Pinto, D. & Obayya, S., 01/2007, In: Journal of Lightwave Technology. 25, 1, p. 440-447 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Accurate perfectly matched layer finite-volume time-domain method for photonic bandgap devices
Pinto, D. & Obayya, S., 03/2008, In: IEEE Photonics Technology Letters. 20, 5, p. 339-341 3 p.
Research output: Contribution to Journal/Magazine › Letter › peer-review
Published
Nonlinear finite-volume time-domain analysis of photonic crystal-based resonant cavities
Pinto, D. & Obayya, S., 2008, In: IET Optoelectronics. 2, 6, p. 254-261 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
2D Analysis of Multimode Photonic Crystal Resonant Cavities with the Finite Volume Time Domain Method
Pinto, D. & Obayya, S., 2008, In: Optical and Quantum Electronics. 40, 11-12, p. 875-890 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Accurate finite element time domain modelling of resonant photonic bandgap cavities
Pinto, D. & Obayya, S., 2005. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Complex envelope alternating direction implicit finite difference time domain method for photonic bandgap structures
Pinto, D. & Obayya, S., 2006. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Time-domain modelling of nonlinear optical waveguides
Pinto, D. & Obayya, S., 2006. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract
Published
New Alternating-Direction-Implicit Finite-Difference-Time-Domain Method for Photonic Crystal Devices
Pinto, D. & Obayya, S., 2007. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract
Published
Novel Time Domain Technique for Photonic Bandgap Resonant Cavities
Pinto, D. & Obayya, S., 2008. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract
Published
Finite Volume Time Domain Analysis of Nonlinear Photonic Crystal Devices
Pinto, D. & Obayya, S., 2008. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract
Published
Novel Dual-Mesh Finite Volume Time Domain Method for the Analysis of Photonic Crystal Based Devices
Pinto, D. & Obayya, S., 2010. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract
Published
Evaluation of performance and operation viability of non-uniform potential solid oxide fuel cell fueled by reformed methane
Piroonlerkgul, P., Kiatkittipong, W., Wongsakulphasatch, S., Aiouache, F. & Assabumrungrat, S., 15/01/2014, In: Journal of Power Sources. 246, p. 719–728 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Prediction of product morphology of lyophilized drugs in the case of Vacuum Induced Surface Freezing
Pisano, R. & Capozzi, L. C., 2/09/2017, In: Chemical Engineering Research and Design. 125, p. 119-129 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Achieving continuous manufacturing in lyophilization: Technologies and approaches
Pisano, R., Arsiccio, A., Capozzi, L. C. & Trout, B. L., 1/09/2019, In: European Journal of Pharmaceutics and Biopharmaceutics. 142, p. 265-279 15 p.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
Characterization of the mass transfer of lyophilized products based on X-ray micro-computed tomography images
Pisano, R., Barresi, A. A., Capozzi, L. C., Novajra, G., Oddone, I. & Vitale-Brovarone, C., 11/06/2017, In: Drying Technology. 35, 8, p. 933-938 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Drawbacks of Batch Processing, Current Status, and Perspectives
Pisano, R., Capozzi, L. C. & Corver, J. A., 24/10/2019, Continuous Manufacturing in Lyophilization of Pharmaceuticals. CRC Press ed. Routledge, 20 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Influence of the freezing protocol on the activity of lactate dehydrogenase after freeze-drying
Pisano, R., Napoletano, F., Paladini, A., De Beer, T. & Capozzi, L., 2017.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Continuous freeze-drying and its relevance to the pharma/biotech industry
Pisano, R., Capozzi, L. & Trout, B. L., 2017.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
A compact and efficient multi-mode antenna for parallel transmission of 7T magnetic resonance imaging
Pitman, S. & Hu, J., 11/2013, 2013 Loughborough Antennas & Propagation Conference. Loughborough, UK: IEEE, p. 534-538 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Optimisation studies for a high gradient proton Linac for application in proton imaging: ProBE: Proton Boosting Linac for imaging and therapy
Pitman, S., 27/09/2019, Lancaster University. 273 p.
Research output: Thesis › Doctoral Thesis
Published
Producing Useful Chemicals Using a Nuclear Reactor
Plant, A., Najdanovic, V., Joyce, M., Jazbec, A. & Snoj, L., 20/01/2020.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Nuclear-driven production of renewable fuel additives from waste organics
Plant, A. G., Kos, B., Jazbec, A., Snoj, L., Najdanovic-Visak, V. & Joyce, M. J., 17/09/2021, In: Communications Chemistry. 4, 1, 132.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Radiation-directed production of chemical reagents and petroleum additives from waste organic feedstocks
Plant, A., 9/02/2023, Lancaster University. 255 p.
Research output: Thesis › Doctoral Thesis
Published
Nuclear Cogeneration of Methanol and Acetaldehyde from Ethylene Glycol Using Ionizing Radiation
Plant, A., Kos, B., Jazbec, A., Snoj, L., Joyce, M. & Najdanovic‐Visak, V., 13/12/2023, In: Industrial and Engineering Chemistry Research. 62, 49, p. 21152-21163 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Neutron and gamma fields at neutron spallation sources for single-event-effects testing
Platt, S. P., Hong, Q., Mein, S. J. & Zhang, L. H., 28/10/2013, Proceedings of the European Conference on Radiation and its Effects on Components and Systems, RADECS. Institute of Electrical and Electronics Engineers Inc., 4 p. 6937365. (Proceedings of the European Conference on Radiation and its Effects on Components and Systems, RADECS).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Fidelity of energy spectra at neutron facilities for single-event effects testing
Platt, S. P., Prokofiev, A. V. & Xiao, C. X., 20/10/2010, 2010 IEEE International Reliability Physics Symposium, IRPS 2010. IEEE, p. 411-416 6 p. 5488795. (IEEE International Reliability Physics Symposium Proceedings).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Charge-collection and single-event upset measurements at the ISIS neutron source
Platt, S., Torok, Z., Frost, C. D. & Ansell, S., 2008, In: IEEE Transactions on Nuclear Science. 55, 4, p. 2126 - 2132 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Charge-collection and single-event upset measurements at the ISIS neutron source
Platt, S. P., Torok, Z., Frost, C. D. & Ansell, S., 2007, 6 p. IEEE.
Research output: Other contribution
Published
Analysis of SEE-inducing charge generation in the neutron beam at the Svedberg laboratory
Platt, S. P. & Török, Z., 1/08/2007, In: IEEE Transactions on Nuclear Science. 54, 4, p. 1163-1169 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Development and application of a neutron sensor for single event effects analysis
Platt, S. P., Cassels, B. & Torok, Z., 1/01/2005, In: Journal of Physics: Conference Series. 15, 1, p. 172-176 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Thermal neutron absorption in printed circuit boards
Platt, S., August, S., MacLeod, M., Anderson, M., Cheneler, D. & Monk, S., 31/03/2021, In: IEEE Transactions on Nuclear Science. 68, 4, p. 463 - 469 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
UV integrated optics devices based on beta-barium borate
Poberaj, G., Degl'Innocenti, R., Medrano, C. & Günter, P., 05/2009, In: Optical Materials. 31, 7, p. 1049-1053 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Relative response of TL and component-resolved OSL to alpha and beta radiations in annealed sedimentary quartz
Polymeris, G. S., Afouxenidis, D., Raptis, S., Liritzis, I., Tsirliganis, N. C. & Kitis, G., 10/2011, In: Radiation Measurements. 46, 10, p. 1055-1064 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The TL and room temperature OSL properties of the glow peak at 110°C in natural milky quartz: a case study
Polymeris, G. S., Afouxenidis, D., Tsirliganis, N. C. & Kitis, G., 01/2009, In: Radiation Measurements. 44, 1, p. 23-31 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Thermally assisted OSL from deep traps in Al2O3:C
Polymeris, G. S., Raptis, S., Afouxenidis, D., Tsirliganis, N. C. & Kitis, G., 03/2010, In: Radiation Measurements. 45, 3-6, p. 519-522 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
346 GHz BWO for fusion plasma diagnostics
Popovic, B., Barchfeld, R., Tang, X., Zhang, F., Yue, L., Mineo, M., Letizia, R., Paoloni, C., Domier, C. W. & Luhmann Jr., N. C., 2014.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Design and fabrication of a sheet beam BWO at 346 GHz
Popovic, B., Himes, L., Gamzina, D., Luhmann Jr., N. C., Paoloni, C., Letizia, R., Mineo, M., Malek Abadi, A., Yue, L., Tang, X., Feng, J., Tang, Y., Gao, M. & Zhang, F., 04/2015, Vacuum Electronics Conference (IVEC), 2015 IEEE International . IEEE, p. 1-2 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Electron gun and CVD diamond window for a 346 GHz sheet beam BWO
Popovic, B., Zheng, Y., Himes, L., Gamzina, D., Luhmann Jr., N. C., Paoloni, C., Letizia, R., Feng, J., Tang, Y., Gao, M., Zhang, F., Yue, L., Tang, X. & Ting, L., 19/04/2016, Proceedings of the 17th IEEE International Vacuum Electronics Conference (IVEC 2016). IEEE
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Nonadiabatic switching of a photonic band structure: Ultrastrong light-matter coupling and slow-down of light
Porer, M., Ménard, J. M., Leitenstorfer, A., Huber, R., Degl'Innocenti, R., Zanotto, S., Biasiol, G., Sorba, L. & Tredicucci, A., 3/02/2012, In: Physical review B. 85, 8, 4 p., 081302.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fission induced by heavy ions: new results from euro g am array
Porquet, M. G., Azaiez, F., Sharpey-Schafer, J. F., Astier, A., Bastin, G., Beausang, C. W., Bourgeois, C., Clark, R. M., Deloncle, I., Duprat, J., Gall, B. J. P., Hannachi, F., Joyce, M. J., Kaci, M., Korichi, A., Coz, Y. L. E., Meyer, M., Perrin, N., Poffe, N. & Redon, N. & 5 others, Schück, C., Sergolle, H., Simpson, J., Smith, A. G. & Wadsworth, R., 1/12/1996, In: Acta Physica Polonica B. 27, 1-2, p. 179-185 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Two-proton high-K oblate structures in ¹⁹⁴Pb
Porquet, M. G., Hannachi, F., Bastin, G., Brindejonc, V., Deloncle, I., Gall, B., Schuck, C., Smith, A. G., Azaiez, F., Bourgeois, C., Duprat, J., Korichi, A., Perrin, N., Poffe, N., Sergolle, H., Astier, A., Le Coz, Y., Meyer, M., Redon, N. & Simpson, J. & 5 others, Sharpey-Schafer, J. F., Joyce, M. J., Beausang, C. W., Wadsworth, R. & Clark, R. M., 1/12/1994, In: Journal of Physics G: Nuclear and Particle Physics. 20, 5, p. 765-773 9 p., 010.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Integration of modelling and conceptual design applied to mechatronics.
Porter, I., Bradshaw, A., Counsell, J. M. & Nagy, Z., 2002, Proceedings of the mechatronics forum international conference (Mechatronics 2002).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Schemebuilder mechatronics.
Porter, I., 1998, Proceedings of the engineering design conference ’98: design reuse. Brunel University, p. 561-568 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Knowledge representation for mechatronic systems.
Porter, I., Counsell, J. M. & Shao, J., 1998, Computer Aided Conceptual Design ’98: proceedings of the 1998 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. M. (eds.). p. 181-196 16 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Two case studies for applying Model Predictive Controllers on chemical processes
Pour, N. D., Montazeri, A., Poshtan, J. & Motlahgh, M. R. J., 2007, Industrial Electronics Society, 2007. IECON 2007. 33rd Annual Conference of the IEEE. New York: IEEE, p. 580-585 6 p. (IEEE Industrial Electronics Society).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Atmospheric hydrodeoxygenation of bio-oil oxygenated model compounds: A review
Pourzolfaghar, H., Abnisa, F., Wan Daud, W. M. A. & Aroua, M. K., 08/2018, In: Journal of Analytical and Applied Pyrolysis. 133, p. 117-127 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Gas-phase hydrodeoxygenation of phenol over Zn/SiO2 catalysts: Effects of zinc load, temperature, weight hourly space velocity, and H ₂ volumetric flow rate
Pourzolfaghar, H., Abnisa, F., Wan Daud, W. M. A. & Aroua, M. K., 1/07/2020, In: Biomass and Bioenergy. 138, 10 p., 105556.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Catalyst characteristics and performance of silica-supported zinc for hydrodeoxygenation of phenol
Pourzolfaghar, H., Abnisa, F., Wan Daud, W. M. A., Aroua, M. K. & Mahlia, T. M. I., 1/06/2020, In: Energies. 13, 11, 13 p., 2802.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Repurposing of metal support structures to form powder for use in additive manufacturing
Powell, D., Rennie, A., Molyneux, A., Burns, N. & Geekie, L., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Unpublished
Recycling and reuse of metal powders for various applications in additively manufactured products
Powell, D., 7/04/2020, (Unpublished) Lancaster University. 176 p.
Research output: Thesis › Master's Thesis

Previous 1...42 43 44 45 46 47 48 49 ...65 Next

Research

School of Engineering

Quick Links

Connect With Us