Home > Research > School of Engineering > Publications & Outputs

Research

View graph of relations

School of Engineering

5501 - 5600 out of 6,455Page size: 100
RSS feed of this list
  1. Published

    Performance of time-critical smart grid applications in narrow band power line communication

    Tsado, Y., Lund, D. & Gamage, K., 2014, p. 407.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  2. Published

    Resilient wireless communication networking for smart grid BAN

    Tsado, Y., Lund, D. & Gamage, K., 2014, IEEE International Energy Conference (ENERGYCON-2014). Piscataway, N.J.: IEEE, p. 846-851 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  3. Published

    Resilient communication for smart grid ubiquitous sensor network: state of the art and prospects for next generation

    Tsado, Y., Lund, D. & Gamage, K., 2015, In: Computer Communications. 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    Performance evaluation of Wireless Mesh Network routing protocol for smart grid networks

    Tsado, Y., Gamage, K. & Lund, D., 2015, Proceedings of IEICE Information and Communication Technology Forum 2015, Manchester, UK. Piechowiak, M. & Adebisi, B. (eds.). Polish Association of Telecommunication Engineers, p. 1-6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  5. Published

    Multiple metrics-OLSR in NAN for Advanced Metering Infrastructures

    Tsado, Y., Akurugoda Gamage, K. A., Lund, D. & Adebisi, B., 3/10/2016, 2016 IEEE Smart Cities Conference (ISC2). IEEE, p. 1-6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  6. Published

    Performance analysis of variable Smart Grid traffic over ad hoc Wireless Mesh Networks

    Tsado, Y., Akurugoda Gamage, K. A., Lund, D. & Adebisi, B., 5/12/2016, Smart Systems and Technologies (SST) 2016, International Conference on. IEEE, p. 81-86 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  7. Published

    Improving the Reliability of Optimised Link State Routing in a Smart Grid Neighbour Area Network based Wireless Mesh Network Using Multiple Metrics

    Tsado, Y., Akurugoda Gamage, K. A., Adebisi, B., Lund, D., Rabie, K. & Ikpehai , A., 28/02/2017, In: Energies. 10, 3, p. 1-23 23 p., 287.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Unpublished

    Improving the Reliability of Optimised Link State Routing Protocol in Smart Grid’s Neighbour Area Network

    Tsado, Y., 16/07/2017, (Unpublished) Lancaster: Lancaster University. 171 p.

    Research output: Thesis › Doctoral Thesis

  9. Published

    Transient distributions of composition and temperature in a gas-solid packed bed reactor by near-infrared tomography

    tSaoir, M. N. A., Abreu Fernandes, D. L., McMaster, M., Kitagawa, K., Hardacre, C. & Aiouache, F., 1/05/2012, In: Chemical Engineering Journal. 189-190, p. 383-392 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  10. Published

    Visualization of water vapour flow in a packed bed adsorber by near-infrared diffused transmittance tomography

    tSaoir, M. N. A., Abreu Fernandes, D. L., Sa, J., McMaster, M., Kitagawa, K., Hardacre, C. & Aiouache, F., 15/12/2011, In: Chemical Engineering Science. 66, 24, p. 6407-6423 17 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. Published

    Three-Dimensional Water Vapor Visualization in Porous Packing by Near-Infrared Diffuse Transmittance Tomography

    Tsaoir, M. N. A., Fernandes, D. L. A., Sa, J., Kitagawa, K., Hardacre, C. & Aiouache, F., 4/07/2012, In: Industrial and Engineering Chemistry Research. 51, 26, p. 8875-8882 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  12. Published

    Micro–climate control in a grow–cell: system development and overview

    Tsitsimpelis, I. & Taylor, C. J., 2014, International Federation of Automatic Control 19th Triennial World Congress. Cape Town, South Africa, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  13. Published

    A 2–dimensional Hammerstein model for heating and ventilation control of conceptual thermal zones

    Tsitsimpelis, I. & Taylor, C. J., 07/2014, 10th UKACC International Control Conference. Loughborough, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  14. Published

    Development of a grow-cell test facility for research into sustainable controlled-environment agriculture

    Tsitsimpelis, I., Wolfenden, I. & Taylor, C. J., 10/2016, In: Biosystems Engineering. 150, p. 40-53 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    Partitioning of indoor airspace for multi-zone thermal modelling using hierarchical cluster analysis

    Tsitsimpelis, I. & Taylor, C. J., 15/07/2015, 14th European Control Conference. IEEE, p. 410-415 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  16. Published

    Micro-climate modelling and engineering design for a horticultural grow-cell prototype

    Tsitsimpelis, I., 2017, Lancaster University. 205 p.

    Research output: Thesis › Doctoral Thesis

  17. Published

    A review of ground-based robotic systems for the characterization of nuclear environments

    Tsitsimpelis, I., Taylor, C. J., Lennox, B. & Joyce, M. J., 1/03/2019, In: Progress in Nuclear Energy. 111, p. 109-124 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    Simultaneous, robot-compatible γ-ray spectroscopy and imaging of an operating nuclear reactor

    Tsitsimpelis, I., West, A., Licata, M., Aspinall, M., Jazbec, A., Snoj, L., Martin, P., Lennox, B. & Joyce, M., 15/02/2021, In: IEEE Sensors Journal. 21, 4, p. 5434 - 5443 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    Improved localization of radioactivity with a normalized sinc transform

    Tsitsimpelis, I., Alton, T., West, A., Taylor, C. J., Livens, F. R., Lennox, B. & Joyce, M., 14/09/2022, In: Frontiers in Nuclear Engineering. 1, 11 p., 989361.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    Localising and identifying radionuclides via energy-resolved angular photon responses

    Tsitsimpelis, I., Alton, T., West, A., Taylor, C. J., Lennox, B., Livens, F. R. & Joyce, M. J., 31/12/2023, In: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 1057, 168771.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  21. Published

    Modelling radiation sensor angular responses with dynamic linear regression

    Tsitsimpelis, I., West, A., Livens, F. R., Lennox, B., Taylor, C. J. & Joyce, M. J., 22/05/2024, 2024 UKACC 14th International Conference on Control (CONTROL). IEEE, p. 157-162 6 p. (2024 UKACC 14th International Conference on Control, CONTROL 2024).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  22. Published

    A null phase-difference technique for ULF wave direction-finding

    Tullet, P. F. & Honary, F., 2/02/2010, In: Radiation Effects and Defects in Solids: Incorporating Plasma Science and Plasma Technology. 165, 2, p. 187-191 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  23. Published

    Mathematics in electronic engineering

    Tunnicliffe-Wilson, J. C. & Dorey, A. P., 1992, 6th conference on teaching electronic engineering in degree courses. Hull, p. 43/1-43/9

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  24. Published

    Correlation between vanadium carbide size and hydrogen trapping in ferritic steel

    Turk, A., San Martín, D., Rivera-Díaz-del-Castillo, P. E. J. & Galindo-Nava, E. I., 15/07/2018, In: Scripta Materialia. 152, p. 112-116 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    Grain boundary carbides as hydrogen diffusion barrier in a Fe-Ni alloy: A thermal desorption and modelling study

    Turk, A., Bombač, D., Jelita Rydel, J., Ziętara, M., Rivera-Díaz-del-Castillo, P. E. J. & Galindo-Nava, E. I., 15/12/2018, In: Materials and Design. 160, p. 985-998 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  26. Published

    Quantification of hydrogen trapping in multiphase steels: Part I – Point traps in martensite

    Turk, A., Joshi, G. R., Gintalas, M., Callisti, M., Rivera-Díaz-del-Castillo, P. E. J. & Galindo-Nava, E. I., 1/08/2020, In: Acta Materialia. 194, p. 118-133 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    Quantification of hydrogen trapping in multiphase steels: Part II – Effect of austenite morphology

    Turk, A., Pu, S. D., Bombač, D., Rivera-Díaz-del-Castillo, P. E. J. & Galindo-Nava, E. I., 15/09/2020, In: Acta Materialia. 197, p. 253-268 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  28. Published

    Characteristics of variations in the ground magnetic field during substorms at mid latitudes.

    Turnbull, K. L., Wild, J. A., Honary, F., Thomson, A. W. P. & McKay, A. J., 1/09/2009, In: Annales Geophysicae. 27, 9, p. 3421-3428 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Facility for the Characterization of Planar Multilayer Thin Film Superconductors

    Turner, D., Malyshev, O. B., Burt, G., Junginger, T., Gurran, L., Dumbell, K. D., May, A. J., Pattalwar, N., Pattalwar, S. M., E., R. (Editor), M., A. (Editor), K., B. (Editor), N., B. (Editor), O., K. (Editor), A., P. (Editor), C., P. (Editor), L., Q. (Editor), S., S. (Editor), W.T., B. D. S. (Editor) & M., Z. (Editor), 1/09/2019.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  30. Published

    No interface energy barrier and increased surface pinning in low temperature baked niobium

    Turner, D., Burt, G. & Junginger, T., 1/04/2022, In: Scientific Reports. 12, 1, 9 p., 5522.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    A facility for the characterisation of planar multilayer structures with preliminary niobium results

    Turner, D., Malyshev, O., Burt, G., Junginger, T., Valizadeh, R. & Gurran, L., 20/07/2022, In: Superconductor Science and Technology. 35, 9, 20 p., 095004.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    Investigating the Superconducting Properties and Surface Morphology of Sputtered Nb Films on Cu Due to Laser Treatment

    Turner, D. A., Malyshev, O. B., Burt, G., Seiler, E., Ries, R., Medvids, A., Onufrijevs, P., Valizadeh, R., Sublet, A., Pira, C., Chyhyrynets, E., Vogel, M., Leith, S. & Junginger, T., 1/06/2023, In: IEEE Transactions on Applied Superconductivity. 33, 4, p. 1-12 12 p., 7500512.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Published

    An investigation of the magnetic field of full flux penetration of superconducting materials for radio-frequency cavities

    Turner, D., 2024, Lancaster University. 212 p.

    Research output: Thesis › Doctoral Thesis

  34. Published

    An experimental evaluation of the stiffening effect of CFRP flange reinforcement and practical end connections on the flexural response of pultruded GRP WF-beams.

    Turvey, G. J., 2004, Proceedings of the IMTCR-04 conference on innovative materials and technologies for construction and restoration: volume 1: keynotes, materials, construction. p. 578-588 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  35. Published

    Review of tests on bolted joints between pultruded GRP profiles.

    Turvey, G. J. & Cooper, C., 2004, In: Proceedings of the Institute of Civil Engineers Civil Engineering. 157, 3, p. 211-233 23 p.

    Research output: Contribution to Journal/Magazine › Journal article

  36. Published

    Vibration frequencies and mode shapes of pultruded GRP circular plates with central circular cut-outs.

    Turvey, G. J. & Mulcahy, N., 2004, Proceedings of the 4th international conference on thin-walled structures: thin-walled structures: advances in research, design and manufacturing technology. p. 927-934 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  37. Published

    Recent research advances at Lancaster University on double-lap bolted tension joints in pultruded GRP plate material.

    Turvey, G. J. & Wang, P., 2004, Proceedings of the 7th world pultrusion conference. 7 ed. p. 1-16 16 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  38. Published

    Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests.

    Turvey, G. J. & Zhang, Y., 2004, Proceedings of the international conference on composites testing and model identification (CompTest 2004). p. 6-7 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  39. Published

    Finite element analysis of buckling and initial failure loads of short pultruded GRP columns.

    Turvey, G. J. & Zhang, Y., 2004, Proceedings of the 7th international conference on computational structures technology. p. 57-58 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  40. Published

    Local buckling of axially compressed, pultruded GRP WF-section short columns – comparison of experimental response with FE analysis predictions.

    Turvey, G. J. & Zhang, Y., 2004, Proceedings of the BSSM (British society for strain measurement) international conference on advances in experimental mechanics: advances in experimental mechanics. p. 87-92 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  41. Published

    Shear failure strength of web-flange junctions in pultruded GRP profiles.

    Turvey, G. J. & Zhang, Y., 2004, Proceedings of the ASIC 2004 conference: advanced polymer composites (ASIC 2004). p. 553-560 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  42. Published

    Torsion of a pultruded GRP WF beam with practical end connections: experimental results and FE analysis.

    Turvey, G. J. & Zhang, Y., 2004, Advanced composite Materials in bridges and structures. p. 99

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  43. Published

    Web-flange junctions of pultruded GRP WF profiles: notched flange shear strengths.

    Turvey, G. J. & Zhang, Y., 2004, Proceedings of a conference: FRP composites in civil engineering (CICE 2004). p. 859-864 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  44. Published

    Annular sector plates: comparison of full-section and layer yield predictions.

    Turvey, G. J. & Salehi, M., 2003, Proceedings of the 9th international conference on civil and structural engineering computing. p. 89-90 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  45. Published

    Tearing failure of web-flange junctions in pultruded GRP profiles.

    Turvey, G. J. & Zhang, Y., 2003, Proceedings of the DFC-7 conference on deformation and fracture of composites.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  46. Published

    Evaluation of the structural performance of box beams fabricated from a novel system of pultruded profiles.

    Turvey, G. J., 2001, In: Composites in constructions. p. 803-808 6 p.

    Research output: Contribution to Journal/Magazine › Journal article

  47. Published

    "Pultruded GRP frames: simple (conservative) approach to design, a rational alternative and research needs for improved design".

    Turvey, G. J., 2001, Proceedings of the ASCE sponsored workshop on composites in construction: a reality.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  48. Published

    Elasto-plastic large deflection of uniformly loaded sector plates.

    Turvey, G. J. & Salehi, M., 2001, Proceedings of the 3rd international conference on thin-walled structures. p. 631-640 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  49. Published

    Effects of temperature on the structural integrity of bolted joints in pultrusions.

    Turvey, G. J. & Wang, P., 2001, In: Composites in constructions. p. 171-176 6 p.

    Research output: Contribution to Journal/Magazine › Journal article

  50. Published

    Single bolt tension joints in pultruded GRP material – effect of elevated temperature on failure loads and strengths and joint efficiency.

    Turvey, G. J. & Wang, P., 2001, Proceedings of the BSSM conference on strain measurement in the 21st century. p. 20-23 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  51. Published

    Bolted connections in PFRP structures.

    Turvey, G. J., 2000, In: Progress in Structural Engineering and Materials. 2, 2, p. 146-156 11 p.

    Research output: Contribution to Journal/Magazine › Journal article

  52. Published

    Flexure of pultruded GRP beams with semi-rigid end connections.

    Turvey, G. J., 12/1999, In: Composite Structures. 47, 1, p. 571-580 10 p.

    Research output: Contribution to Journal/Magazine › Journal article

  53. Published

    Moment – rotation tests on bolted end connections in pultruded GRP beams – tests with stainless steel cleata and an assessment of their performance relative to GRP cleats.

    Turvey, G. J., 2000, Proceedings in the ECCM9 (composites – from fundamentals to exploitation). Brighton

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  54. Published

    Semi-rigid column base connections in pultruded GRP frame structures.

    Turvey, G. J. & Cooper, C., 2000, In: Computers and Structures. 76, 1-3, p. 77-88 12 p.

    Research output: Contribution to Journal/Magazine › Journal article

  55. Published

    Experimental and computed natural frequencies of square pultruded GRP plates: effects of anisotropy, hole size ratio and edge support conditions.

    Turvey, G. J., Mulcahy, N. & Widden, M. B., 12/2000, In: Composite Structures. 50, 4, p. 391-403 13 p.

    Research output: Contribution to Journal/Magazine › Journal article

  56. Published

    Uniform and patch loaded steel plates: comparisons between analysis and experiment.

    Turvey, G. J. & Osman, M. Y., 2000, Computational steel structures technology. Ivanyi, M., Muzeau, J. P. & Topping, B. H. V. (eds.). Edinburgh: Civil-Comp Press, p. 49-59 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  57. Published

    Uniform and patch loaded steel plates – comparisons between analysis and experiment.

    Turvey, G. J. & Osman, M. Y., 2000, Proceedings of the 5th international conference on computational structures technology. Leuven

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  58. Published

    Fibre Reinforced Polymer Composite Structural Pultrusions and Their End Connections.

    Turvey, G. J., 1999, Composites and Plastics in Construction: BRE, Watford, UK, 16th-18th November 1999. RAPRA, p. 1-8 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  59. Published

    Semi-rigid bolted connections in pultruded GRP beams and simple frames: part 1

    Turvey, G. J., 1999, Proceedings of the COST C1 conference: COST C1: control of the semi-rigid behaviour of civil engineering structural connections. Liege, p. 547-556 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  60. Published

    Elasto-plastic response of uniformly loaded sector plates: full-section yield model predictions and spread of plasticity.

    Turvey, G. J. & Salehi, M., 11/2001, In: Computers and Structures. 79, 26-28, p. 2335-2348 14 p.

    Research output: Contribution to Journal/Magazine › Journal article

  61. Published

    Frame connections.

    Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 27-49 23 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  62. Published

    Plate-to-plate mechanical: part II: testing and applications.

    Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 15-26 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  63. Published

    Recent developments in testing, design analysis and modelling of bolted connections in pultruded GRP frames made of open-section profiles.

    Turvey, G. J., 1998, Proceedings of the 4th EPTA world pultrusion conference. European Pultrusion Technology Association, p. 14

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  64. Published

    Single-bolt tension joint tests on pultruded GRP plate: effects of the orientation of the tension direction relative to pultrusion direction.

    Turvey, G. J., 1998, In: Composite Structures. 42, 4, p. 341-351 11 p.

    Research output: Contribution to Journal/Magazine › Journal article

  65. Published

    Torsion tests on pultruded GRP sheet.

    Turvey, G. J., 1998, In: Composites Science and Technology. 58, 8, p. 1343-1351 9 p.

    Research output: Contribution to Journal/Magazine › Journal article

  66. Published

    Semi-rigid connection in pultruded GRP frame structures.

    Turvey, G. J. & Cooper, C., 1998, Mechanics of composite materials and structures. Mota Soares, C. A. ,., Mota Soares, A. M. & Freitas, M. J. M. (eds.). p. 151-166 16 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  67. Published

    Semi-rigid connections and their effects on the sway response of pultruded GRP columns in low-rise construction.

    Turvey, G. J. & Cooper, C., 1998, Proceedings of the 2nd international conference on composites in infrastructure (ICCI ’98). University of Arizona, p. 221-235 15 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  68. Published

    Uplift tests on column base connections in pultruded GRP frames.

    Turvey, G. J. & Cooper, C., 1998, In: Proceedings of the eighth international conference on composite materials (ECCM-8). p. 285-292 8 p.

    Research output: Contribution to Journal/Magazine › Journal article

  69. Published

    Elastic large deflection analysis of stiffened annular sector plates.

    Turvey, G. J. & Salehi, M., 1998, In: International Journal of Mechanical Sciences. 40, 1, p. 51-70 20 p.

    Research output: Contribution to Journal/Magazine › Journal article

  70. Published

    Effect of load position on the lateral buckling of pultruded GRP cantilevers - correlations between experiment and theory.

    Turvey, G. J., 05/1996, In: Composite Structures. 35, 1, p. 33-47 15 p.

    Research output: Contribution to Journal/Magazine › Journal article

  71. Published

    Lateral buckling tests on rectangular cross-section pultruded GRP cantilever beams.

    Turvey, G. J., 1996, In: Composites Part B: Engineering. 27, 1, p. 35-42 8 p.

    Research output: Contribution to Journal/Magazine › Journal article

  72. Published

    Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project

    Turvey, G. J., 1996, Structural design of polymer composites: EUROCOMP design code and handbook. Clarke, J. L. (ed.). London: E. and FN Spon, p. 719-741 23 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  73. Published

    Lateral buckling tests on pultruded GRP I-section beams with simply supported - simply supported and clamped - simply supported end conditions.

    Turvey, G. J. & Brooks, R. J., 1996, Proceedings of the 1st international conference on composites in infrastructure (ICCI '96). University of Arizona, p. 651-664 14 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  74. Published

    Characterisation of the short term static moment - rotation response of bolted connections between pultruded GRP beam and column WF-sections.

    Turvey, G. J. & Cooper, C., 1996, Proceedings of the 2nd international conference on advanced composite materials in bridges and structures (ACMBS II). Montreal: Canadian Society for Civil Engineering, p. 927-934 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  75. Published

    Semi-rigid pultruded GRP frame connections: tests to determine static moment-rotation characteristics.

    Turvey, G. J. & Cooper, C., 1996, ECCM-7 Seventh European Conference on Composite Materials : realising their commercial potential. Bader, M. (ed.). Cambridge: Woodhead Publishing Limited, p. 295-300 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  76. Published

    Full-range response of circular steel plates subjected to combined transverse pressure and edge compression.

    Turvey, G. J. & Drinali, H., 1996, Advances in computational techniques for structural engineering. Topping, B. H. V. (ed.). Edinburgh: Civil-Comp Press, 313 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  77. Published

    Elastic and initial flexural failure analysis of unsymmetrically laminated cross-ply strips.

    Turvey, G. J. & Osman, M. Y., 1996, In: Composites Part B: Engineering. 27, 5, p. 505-518 14 p.

    Research output: Contribution to Journal/Magazine › Journal article

  78. Published

    Analysis of pultruded glass reinforced plastic beams with semi-rigid end connections.

    Turvey, G. J., 1997, In: Composite Structures. 38, 1, p. 3-16 14 p.

    Research output: Contribution to Journal/Magazine › Journal article

  79. Published

    Non-linear first yield analysis of circular plates subjected to combined uniform pressure and edge compression.

    Turvey, G. J. & Drinali, H., 1997, In: Computers and Structures. 63, 4, p. 769-773 5 p.

    Research output: Contribution to Journal/Magazine › Journal article

  80. Published

    Circular plates with one diametral stiffener: an elastic large deflection analysis.

    Turvey, G. J. & Salehi, M., 1997, In: Computers and Structures. 63, 4, p. 775-783 9 p.

    Research output: Contribution to Journal/Magazine › Journal article

  81. Published

    Full-section yield analysis of uniformly loaded sector plates.

    Turvey, G. J. & Salehi, M., 1997, Trends in structural mechanics: theory, practice and education. Roorda, J. & Srivastava, N. K. (eds.). v. 54 ed. Dordrecht; London: Kluwer Academic, p. 289-298 10 p. (Solid mechanics and its applications).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  82. Published

    Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project

    Turvey, G. J., 1995, EUROCOMP design guide and background projects. Clarke, J. L. (ed.). London: Chapman and Hall

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  83. Published

    Single bolt tension joint tests on pultruded GRP WF-section web and flange material.

    Turvey, G. J. & Cooper, C., 1995, Proceedings of the 10th international conference on composite materials (ICCM-10). Poursartip, A. & Street, K. (eds.). Vancouver: Woodhead Publishing Ltd., p. 621-628 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  84. Published

    Large deflection analysis of eccentrically stiffened sector plates.

    Turvey, G. J. & Salehi, M., 1995, Proceedings of a conference on developments in computational techniques for civil engineering (CIVIL-COMP 95). Topping, B. H. V. (ed.). Edinburgh: Civil-Comp Press, p. 243-253 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  85. Published

    Tension/compression strength of unnotched/notched pultruded GRP plate.

    Turvey, G. J., 1992, Proceedings of the ECCM-composites testing and standardisation conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  86. Published

    Tests on pultruded GRP posts for handrail/barrier structures.

    Turvey, G. J. & Slater, R. C., 1992, First international conference on advanced composite materials in bridges and structures. Canada

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  87. Published

    Open-hole tension strength of pultruded GRP plate.

    Turvey, G. & Wang, P., 1/02/2003, In: Proceedings of the ICE - Structures and Buildings. 156, 1, p. 93-101 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  88. Published

    Structural analysis of CFRP-plated pultruded GRP beams.

    Turvey, G., 1/04/2006, In: Proceedings of the ICE - Structures and Buildings. 159, SB2, p. 65-75 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  89. Published

    Tearing failure of web-flange junctions in pultruded GRP profiles.

    Turvey, G. J. & Zhang, Y., 1/02/2005, In: Composites Part A: Applied Science and Manufacturing. 36, 2, p. 309-317 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  90. Published

    Failure of pultruded GRP single-bolt tension joints under hot-wet conditions.

    Turvey, G. & Wang, P., 1/02/2007, In: Composite Structures. 77, 4, p. 514-520 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  91. Published

    Failure of pultruded GRP WF-section webs in compression - an experimental investigation.

    Turvey, G., 2006, Proceedings of the 12th European conference on composite materials (ECCM-12).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  92. Published

    An FE analysis of the stresses in pultruded GRP single-bolt tension joints and their implications for joint design.

    Turvey, G. & Wang, P., 2006, Proceedings of the 6th international conference on computational mechanics (ECCM 2006).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  93. Published

    Single-bolt tension joints in pultruded GRP plate - effects of elevated temperature on failure loads, failure modes, load orientation and joint efficiency.

    Turvey, G. & Wang, P., 2006, Proceedings of the 2nd international conference on joining plastics 2006..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  94. Published

    Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests.

    Turvey, G. & Zhang, Y., 02/2006, In: Composites Part A: Applied Science and Manufacturing. 37, 2, p. 152-164 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  95. Published

    A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns.

    Turvey, G. & Zhang, Y., 09/2006, In: Computers and Structures. 84, 22-23, p. 1527-1537 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  96. Published

    Cross-stiffened circular plates: an elasto-plastic large deflection analysis

    Turvey, G., 14/09/2010.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  97. Published

    Effects of bonded splice joints on the flexural response of pultruded fibre reinforced polymer beams

    Turvey, G., 7/09/2010. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  98. Published

    An experimental investigation of bolt pull-through in pultruded GRP plate

    Turvey, G., 1/09/2009, p. 462-472. 11 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  99. Published

    Experimental evaluation of bolt pull-through in pultruded glass-fibre-reinforced polymer plate

    Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 307-319 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  100. Published

    Failure of pultruded GRP angle leg junctions in tension

    Turvey, G. & Wang, P., 27/07/2009. 11 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

Previous 1...52 53 54 55 56 57 58 59 ...65 Next

Back to top